Debian Configuration :: Wireless Config With System In Testing?
Nov 8, 2015
I'm trying to set up my Intel Wireless 3945ABG (which is supported in the kernel) and I don't understand where to start if I want to use systemd to do this.
I've installed my Debian (Stretch Alpha4) base system using the wireless to download the necessary components but when I boot into the system I need to set up the wireless card separately.
I would prefer to be able to install wireless without the requirement of connecting via ethernet so no package installs other than what is downloaded by the installer.
I can't even find documentation on this specific issue because everyone seems to reference /etc/network/interfaces which AFAIK is not supported in systemd. How do I configure a wireless card using only systemd?
View 2 Replies
ADVERTISEMENT
May 25, 2010
I've installed the latest testing version, which has 2.6.32 kernel perfect for me. I was very amazed when check system monitor and saw it runs with 90MB RAM, meanwhile my ubuntu desktop takes only 400, and the pocket version of ubuntu on vmware has 180MB RAM.
The questions is: Debian runs on vmware 7. Could the amount of RAM change when switching to a normal environment? Or I have to test and see what is happening..What problems could occur when using a testing version?
View 8 Replies
View Related
Oct 3, 2010
but I have been literally banging my head against the wall.I am trying to configure skype on my system (testing, x86) but unsuccessfully.Let me say that I am now using skype (static) as downloaded from skype website.
$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04)
[code]....
View 3 Replies
View Related
Sep 1, 2010
This may fall under the "ain't broke don't fix it" category but it's driving me nuts. I've got the Broadcom 4322 wireless adapter in my laptop and it works fine with broadcom-wl driver and kmod. However there is no ifcfg-eth1 file and the card does not show up in system-config-network.
View 2 Replies
View Related
Mar 29, 2011
I installed the Gnome desktop CD1 AMD 64 version of Debian Squeeze. I installed samba and python-smbc. I am missing samba printers in my system-config-printer. Anyone know why? [url]
View 2 Replies
View Related
Feb 6, 2010
I run a network with about twenty Debian systems, currently running Etch. I maintain a central passwd and group file, which is regularly copied to each system. This works fairly well, but I have some problems with the system account UIDs and GIDs.
I find different systems often pick different UID and GID values for system accounts like bind, ntp, sshd etc. I think the values chosen at install come from the system UID and GID ranges, and are allocated sequentially, so the values on a system depend on which packages were installed, and the order they were installed in.
Is there any way to specify the UID and GIDs for system accounts at installation time? Are there any other thoughts on how to implement shared passwd and group files (apart from NIS, which I don't want to use)?
View 1 Replies
View Related
Dec 26, 2015
DEVICES:
atheros AR9485
realtek rtl8111/8168/8411
atheros-firmware and firmware-realtek are installed from repo.
ifconfig does not show the network devices:
ifconfig -a does show them, i ran the commands ifconfig eth1 up and ifconfig wlan1 up, which resulted in them showing when typing ifconfig, however both still are not working.
(ifconfig)Also eth1 is only showing an inet6 address not an inet/ipv4 address and wlan1 doesn't show any.
Checked the bios and noticed that network devices were enabled so i don't think its my bios.
Also ran a SystemRescueCd which i got from here: [URL] .... With this live cd, the networking was working.
Added:
Code: Select allauto eth1
iface eth1 inet dhcp
allow-hotplug eth1
Now I get a net address...
View 1 Replies
View Related
Oct 21, 2010
I get the following on startup:
(==) Log file: "/var/log/Xorg.0.log", Time: xx
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE) open /dev/fb0: No such file or directory
[Code].....
My usual aptitude safe-upgrade routine has not throw any errors. I do remember a libxcb-* package updating (or installing?) on the last run. This is the only relevant package I can recall.
View 14 Replies
View Related
Feb 9, 2011
I have an older system that has been running testing for about 4 years. Originally I was running testing for several packages that were not yet available in stable. However, now that this system has a more crucial role in the network I have considered moving it to stable in hopes that it I can gain some insurance on it's uptime. It is important to note that I have never had a problem with the testing distribution and would be quite content to continue running it; I do want to know my options though.
I have not yet updated the system since the stable release of squeeze, I am considering to change my sources from testing to stable and just let apt take care of the rest. Anyone have any experience with such a thing? After searching Google I have found some solutions to force a downgrade, but that is really not what needs to be done here. I suppose I should have switched my sources to squeeze some time ago and this probably would have worked itself out.
A similar question is what happens a couple of years from now when another release happens. Have you had good luck updating from old stable to stable? I've run testing on several machines now for several years and have went through freezes and dist-upgrades several times with no major problems at all. Will I see the same stability if I move to the stable distribution?
View 1 Replies
View Related
Feb 22, 2016
After the latest update of network-manager-gnome to version 1.1.90-3 , I see that I have to start the nm-applet in Testing from a terminal, otherwise I can't bring up my wired connection.
The usual nmcli networking on command is failing to connect, also restarting the network-manager.service with systemctl doesn't do anything, the only way to connect at this time is indeed to manually start the nm-applet from a terminal.
I've also spotted this message in the logs:
Code: Select alltraps: nm-applet[1105] general protection ip error:0 in libgobject-2.0.so.0.4600.2
Could it be something wrong with my configuration (although , it worked before this update) or is it some bug in network-manager-gnome 1.1.90 ?
View 4 Replies
View Related
Feb 26, 2010
I've been working on the setup of a FTP server on my Debian system for the whole afternoon. But I can't get it straight! Normally I get it working in just a second, but it's been a while I guess.
I installed only proftpd-basic and it's default dependencies. Should be enough right?
My configuration files are as follows:
I created the user zeitgeist, gave it a password, group and a homedir. Group of the user is nogroup and the homedir is correct with the 755 permission. My port 21 for FTP is open I tested it with nmap -p 21 [ip-address].
My Filezilla client tells me that at first he is connecting, then the connection is established, And then the connection is closed by server.
View 1 Replies
View Related
Jun 30, 2010
For anyone using Blueman with Testing (Squeeze), todays Python upgrade to version 2.6 stops it from working due to a Blueman bug. This has been fixed in blueman version 1.21-4, which you can install from SID if you don't want to wait the 10 days for the normal migration.
View 1 Replies
View Related
Feb 17, 2011
I am running testing (with fluxbox) and my keyboard periodically freezes, meaning whatever I type in it doesn't respond. This lasts a few seconds (can be 2-3 or sometimes even more like 10) and one's it comes back I get all the keystrokes I was typing during the freeze. The frequency of the freezes can be like 4-5 times every hour and are very annoying. I can't seem to relate them to anything, they can occur during heavy usage but also when the box is doing absolutely nothing but waiting lazily for me to type some google search terms.
Can anybody help me track this problem down? At the moment I am using a wireless keyboard but this must be unrelated since I tested a couple of other keyboards (both wireless and wired) and the problem persists.
View 1 Replies
View Related
May 19, 2011
can't use catalyst driver, virtualbox refuse to run, selinux problems,I want to know if its possible to install only this new kernel 2.6.38 without "contaminating" the rest of my installation with unstable packages?
View 2 Replies
View Related
Jun 6, 2011
After doing a aptitude full-upgrade I no longer have the Debian menu showing in the Openbox menu. According to Obmenu, Debian is listed; it's just not showing when I right click. The upgrade brought a new version of Openbox so I assume that has something to do with it.
View 9 Replies
View Related
Sep 14, 2010
I'm trying to install Debian-testing to an ASUS 1018P netbook on which I have successfully installed Arch in the past. I'm installing from an external DVD drive and when I get to the point of network configuration it fails. I'm connected via Ethernet via eth0 which is recognized. Here is the last part of the ouput:
kernel: [ 1807.932848] atl1c 0000:01:00.0: irq 29 for MSI/MSI-X
kernel: [ 1807.933453] ADDRCONF(NETDEV_UP): eth0: link is not ready
dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval is 8
dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval is 15
code....
View 14 Replies
View Related
Dec 22, 2010
I have been trying to install fglrx drivers for my ATI card with Debian testing (x86) but without any luck. I have tried what it says here http://wiki.debian.org/ATIProprietary but I only come up with a blank screen (and also invoke-rc.d gdm stop does not work either?) I have also followed the directions at [URL]....html and that doesn't work either (make error 127). I must be doing something totally wrong.
View 6 Replies
View Related
Jul 5, 2011
AMD 64 Upgrade to testing last night killed my internet connection. The lan works, I can ping the dns server from my IP, however no mail, browser possible. Is something in testing broken again?
View 5 Replies
View Related
May 23, 2011
I accidentally deleted my .config for my kernel configuration on Linux, and seem to remember there was a way to retrieve the kernel configuration via the proc filesystem somehow. Is this still possible, and if so how would I do it?
View 1 Replies
View Related
Jul 1, 2011
I just updated my Debian testing as usual (apt-get update && apt-get dist-upgrade), and it totally screwed up Nvidia drivers. I had to revert to integrated graphic card to start Xorg.
After that, I noticed that libgl1-nvidia-glx is missing, and when I tried to install it back, it produces the following:
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
libgl1-nvidia-glx : Depends: libgl1-nvidia-alternatives but it is not going to be installed
E: Broken packages
Any ideas what's going on with it?
View 14 Replies
View Related
May 17, 2011
EDIT: This thread has taken a different turn, please go down to viewtopic.php?f=30&t=64242#p370832 Below is I originally wrote, now totally irrelevant.:D I am delighted/bored with my one Debian Squeeze install, so I've decided to free up a partition to play with another configuration of the universal OS.At the moment I am liking the looks of the supposedly not so unstable Sid; what's the ideal download/install path to get Sid up and running? Is it:1) I already have a live Squeeze GNOME DVD lying around; should I install that again and upgrade to Sid?
View 6 Replies
View Related
Jun 30, 2015
I have just installed Debian Weezy and for some reason it just does not see my router.1) is there a good network config script I can use?if not then what files must be edited to setup the network?When I attempt to ping the router, it does not see it. I have checked the cables etc.
View 6 Replies
View Related
Mar 9, 2015
I just installed jessie testing however the wireless card was not recognized, lspci says it's Intel Centrino Ultimate-N 6300.
View 3 Replies
View Related
Jun 20, 2015
I am having trouble using touch pad in jessie. My touch pad was ok when it's in wheezy but after i updated to jessie, i can't really get used to it.
I don't know whether i setting it up wrongly, sometimes, my touchpad will keep dragging, without releasing. And if I click the bottom right of the touch pad, it's not right click; instead i have to use two fingers.
etc. So how can i change to back to a more traditional usage? Also, do jessie have a setting like ubuntu saying disable touch pad while typing?
View 2 Replies
View Related
Feb 5, 2016
Running natios server in Debian 8? I cannot start nagios3 demon, it got following error:
Error: Check period '24x7' specified for service 'check ssh connection' on host 'testk2' is not defined anywhere!
Error: Notification period '24x7' specified for service 'check ssh connection' on host 'testk2' is not defined anywhere!
But if I commented following statement in generic-service_nagios2.cfg, it works just fine.
# check_period 24x7
# notification_period 24x7
View 2 Replies
View Related
Mar 11, 2016
Can I use the config for my current kernel (the jessie 3.16 one), and use it to build a more recent kernel (3.18)? Do I just copy across the config and try and build with it, or is there some tool that will bring across the existing config but also set up reasonable defaults for any new options in the newer kernel, and any other migrations that might need to be applied?
View 4 Replies
View Related
May 16, 2010
I'm recompiling my kernel on a dell latitude c600 running lenny as I type, and it's taking forever, so far upward of 4 hours.I think I'm getting drivers for ever piece of computing hardware since the univac So I googled "a kernel conf creator" and got [URL]... Its a nice, clean method for finding what hardware your using... you just run lspci cpuinfo make xconfig and put in all the info yourself. So I was thinking: this is exactly the kind of dull, repetitive behavior that computers were made for. Is there a program that can find my hardware info, and make the.config itself, with very little user input?Or should I reinstall debian on another partition and steal the .config from it? Or should I man it up and do it myself?
View 14 Replies
View Related
Oct 28, 2015
I know very little about Debian but have an ASUS T100TA tablet which runs fairly well under Debian 8 Jessie (kernel 3.16.0-4-686-pae). I used the following guide successfully to activate the wireless but am having trouble with the audio section of it.URL...
First, I went here and downloaded the file called 'NEW T100_B.state'.URL....
Then I copied it to /var/lib/alsa/asound.state and ran 'alsactl restore' which reported that i had no soundcards.I then downloaded and expanded linux-firmware-master-intel.tar.gz but am not sure what to do with these files. I copied them to /lib/modules/3.16.0-4-686-pae/kernel/drivers/firmware as they are specific for this kernel, but they don't seem to be doing anything and 'alsactl restore' still tells me that I don't have a soundcard. What do I need to do with these files?
View 13 Replies
View Related
Feb 10, 2016
I've downloaded configuration files for my VPN, Kovurt, and they don't have a .ovpn file extension. Further, when I tried to enter the information manually (using this guide), I saw that the files only include the <ca> tags, and no <cert>, <key> or <tls-auth> tags.
Here is the content of one of the config files, simply named 'Tokyo' with no extension. (adding .ovpn didn't work either):
Code: Select allclient
dev tun
proto udp
remote 50.31.255.86 443
resolv-retry infinite
nobind
[Code] ....
I have an open ticket with Kovurt asking for the other info, but I know already that they don't have much in the way of documentation or support for Linux.
View 0 Replies
View Related
Apr 17, 2010
how can i do user2 can't get the file /home/user1/www/wp-config.php by using an editor but the webserver can?i mean how can i disallow access on other user's directorys but allow only one? (www-data in case).
View 7 Replies
View Related
