Running CentOS 5 KDE as a DNS Resolving Caching Name Server, Centos.myname.local ... I run PeerBlock with iBlock List, the 2 main ones which blocks everything, I may have to config it to allow connections. How is Nagios to install and setup. I use it at work, in the NOC and really love this software. 5 computers and a lot of devices using reserved IP's.
View 3 RepliesRunning natios server in Debian 8? I cannot start nagios3 demon, it got following error:
Error: Check period '24x7' specified for service 'check ssh connection' on host 'testk2' is not defined anywhere!
Error: Notification period '24x7' specified for service 'check ssh connection' on host 'testk2' is not defined anywhere!
But if I commented following statement in generic-service_nagios2.cfg, it works just fine.
# check_period 24x7
# notification_period 24x7
I have a config file called hosts.cfg.
It contains entries like this:
Quote:
There are many more of these entries in the file, over 500, all in this same format: each host has a "define host" followed by 18 directives contained in squiggly brackets.
If I want to know all the hosts that are in the hostgroup called SERVER_GRP, I suppose I would need to read every hostgroups line (8th directive in squiggly brackets) that contains SERVER_GRP and output the corresponding host_name line (1st directive in squiggly brackets) from that entry.
I have a few questions to ask, so please pardon me
1) How to check for https in commands config file for Nagios? I only know how to check for http, not sure for https.
2) The log file in Nagios, is it possible to extend Nagios's plugins (or are there already have plugins existed) so that we could actually make use of the log file to check for status of each and every services in different hosts, instead of looking through the log file manually which can be very time-consuming if the list is very long.
I was tryin to deploy svn on centos 5 with respect to [URL] I am stuck understandin the location svnpath parameter on svn config
[Code]...
Does anyone know of a good tutorial for installing and configuring Nagios on OpenSuSE 11.x?
View 3 Replies View Relatedi am installing nagios-3.2 in rhel 5 . it show the errors in make all command..
Quote:
[root@ns1 nagios-3.2.3]# make all
cd ./base && make
make[1]: Entering directory `/root/Desktop/nagios-3.2.3/base'
gcc -g -O2 -DHAVE_CONFIG_H -DNSCORE -o nagios nagios.c broker.o nebmods.o checks.o config.o commands.o events.o flapping.o logging.o macros-base.o netutils.o notifications.o sehandlers.o skiplist.o utils.o retention-base.o xretention-base.o comments-base.o xcomments-base.o objects-base.o xobjects-base.o statusdata-base.o xstatusdata-base.o
[Code]...
I have been running a webserver for a time now. And for fun I thought I would use Nagios for monitoring it. But the installation instruction says install this on webserver01 and that on webserver02. I only have one server and want to monitor it remotely from a simple browser. Is this possible or does Nagios need at least two separate servers? Can't it just run it on my one server?
View 1 Replies View RelatedError: Cannot open log file '/usr/local/nagios/var/archives/nagios-07-08-2011-00.log' for reading!
View 2 Replies View RelatedI am trying to add dag repository in Centos 5.3 for nagios according to this documents..
[URL]
but it is of no use... i dont know what is wrong...
how to install nagios in censtos 5.3? I am trying to install nagios with yum.
I want to monitor network bandwidth/usage/stats on an interface dedicated to iSCSI traffic.I've read nagios is one of the better solutions available, and I've found a How-To here: Installing Nagios on CentOS 4.x/5.x.But it seems yum won't install it. Am I missing something? Is it no longer possible to install nagios with yum? Should I use a different mirror?
View 6 Replies View RelatedHow to see the code behind the nagios plugin: Nagios Checker? I opened the folder which i have downloaded. After that where do i have to go to see the codes? Is it in App_Codes?
View 14 Replies View RelatedTrying to monitor mysql 5.0.77 with nagios 3.2.1 under CentOS 5.4. Everything with nagios has been running without a hitch for me, however, when I added the following to /etc/nagios/objects/localhost.cfg to try to monitor mysql, I get an error that reads "Running configuration check... CONFIG ERROR! Restart aborted. Check your Nagios configuration."
define service{
use local-service
host_name localhost
service_description MYSQL
check_command check_mysql
notifications_enabled 1
}
This is pretty much what I added to monitor other things on the server such as ftp and smtp, just switched out check_smtp with check_mysql, etc.
I found it once on the web by means of googling it.How do you run a command, from nrpe.cfg, to make sure that it works?For instance, command[check_total_procs]=/usr/local/nagios/libexec/check_procs -w 150 -c 200
View 1 Replies View RelatedIs there a reason why the selinux module for nagios just doesn't work? I'm running CentOS release 5.4 (Final) and did "yum install nagios" and now have nagios-3.2.0-1.el5.rf installed. I'm having to create policy after policy after policy, and still haven't reached the end of the rainbow.
I suppose after I run out of selinux violations, I could figure out how to combine all of these modules and post the result, but it seems really, really weird to think that I'm the only person who has ever installed nagios from the repo with SELinux enabled.
I've tried to read many of the topics in this forum first and tried to find a solution to my problem, but can't find one.I'm testing CentOS 5.5, it's the first time I'm using a CentOS Linux release.I'm trying to configure the proxy "client side " on it and cannot find how to do it.On other Linux release I've used the ENV variable like "http_proxy" or "HTTP_PROXY" etc etc.This time, I don't know why but it doesn't work.I've put the name and @ip of the proxy in /etc/hosts and tried different version upper/lowercase of "http_proxy" "HTTP_proxy" "ftp_pr.." but it doesn't work.If I configure manually Firefox and puting the name or @ip of the proxy we have on our network, it works.But if I try to use ENV variable it doesn't work...
View 1 Replies View RelatedWe have Nagios running on a server, and are installing NRPE as a daemon on web servers we need to monitor. I'm two servers in and have hit a small snag. The two servers we're currently trying to monitor are, to the best of our knowledge, very similar (Centos 5.4, Apache, MySQL, PHP etc etc), and the installations of NRPE on them should be the same. One is being monitored just fine, however we can't check on the other one without including the -n switch (to disable SSL) in the check_nrpe call. If we don't, however, the error we get is, "CHECK_NRPE: Socket timeout after 10 seconds.". In /var/log/messages on the machine that fails we see:
May 24 17:23:49 ourserver xinetd[23583]: START: nrpe pid=27932 from=123.123.123.123
May 24 17:23:59 ourserver nrpe[27932]: Could not read request from client, bailing out...
May 24 17:23:59 ourserver xinetd[23583]: EXIT: nrpe status=0 pid=27932 duration=10(sec)
The only kind of related thing I can think of that's different between the two machines is that one (the one that works) has actually had an SSL certificate installed on it, for the site it hosts.
I'm trying to setup my test nagios to check the disk space of another linux box. I've got it setup and checking. But to my surprise, it was checking the nagios server's local disk space instead of the remote linux.
Here is my services.cfg.
define service{
use basic-service
name disk-space
check_command check_local_disk!20%!10%! /
[Code].....
I tried to run system-config-kickstart when after full installed CentOS 5.3,it report error as following,does anyone face the same problem?
[root@localhost ~]# system-config-kickstart
Loaded plugins: fastestmirror, kernel-module, priorities, protectbase,
: versionlock
[code]....
I am having issues installing nagios-plugins using yum. Been using Suse don't have much experience with CentOS (CentOS release 5.2 (Final), ) Linux hoster 2.6.18-92.1.22.el5 #1 SMP Tue Dec 16 12:03:43 EST 2008 i686 athlon i386 GNU/Linux It says
"Error: Missing Dependency: perl(Net::SNMP) is needed by package nagios-plugins"
Whereas net-snmp-perl.i386 is already installed.
yum deplist nagios-plugins
Loading "fastestmirror" plugin
Loading mirror speeds from cached hostfile
[Code]....
So we monitor all of our disk space, but only get pages for critical. What we would like to do is have one email sent to our team every month with all the "Warnings" for our disk. I have been searching and haven't found a way to do this. Any suggestions?
View 1 Replies View RelatedI use this GUI app a lot when I was using Ubuntu. Very simple to use. I want to use it in my new Debian 7 xfce install. My understanding is that I would have to build a deb from source to allow me to use this app? If this is the case, what is the best (easiest) way to do this. I saw some videos in YouTube but I'm not sure if things have changed with the new Debian 7. I have never used Debian before so if possible, go easy on me...
View 3 Replies View RelatedI have 2 HDDs, and under linux, sda is ntfs, sdb is ext4 of debian jessie, the booting order is sdb ( it contains the grub on sdb's MBR) then sda, the windows boot loader on its own MBR.
The sda was win8, but now just formatted it and did a fresh installation of win10. After power off PC and plug the sdb up again. Turn on the power, setup the booting prior as same as above, but, the grub can not realize the windows 10 boot sector, error message is: no such device /dev/sda1... (and following a digit array) 8xxxxxxxxxxxx....
How to config grub in order to make it can dual boot both Operating System?
I'm trying to install iw-0.9.19 on xubuntu.When i type the command "make", i get:
/bin/sh: pkg-config: not found
/bin/sh: pkg-config: not found
Makefile:38: *** Cannot find development files for any supported version of libnl. Stop.
[code]....
Hi,
This is my first time here.
I have installed GTK by "sudo apt-get install gnome-core-devel" and I can build the test-application named "Hello ubuntu" successfully with `pkg-config --cflags --libs gtk+-2.0`.
But when I built an application which needs the GTK's support, it said as follows:
checking for gtk-config... no
checking for GTK - version >= 0.99.7... no
*** The gtk-config script installed by GTK could not be found
*** If GTK was installed in PREFIX, make sure PREFIX/bin is in
*** your path, or set the GTK_CONFIG environment variable to the
*** full path to gtk-config.
configure: error: Cannot find proper gtk version
I don't know what's wrong with it,anyone can help me?
Thanks a lot!
I used debian several years ago, and I'm interested in trying it out again.Right now, I have a laptop running Windows Vista and Ubuntu 9.10 in a dual boot configuration. Here is the output ofsudo fdisk -l
Disk /dev/sda: 320.1 GB, 320072933376 bytes
240 heads, 63 sectors/track, 41345 cylinders
Units = cylinders of 15120 * 512 = 7741440 bytes
[code]....
Going through the forums I read a post, where it was told to rebuild a package... But unfortunately, I didnt understand a thing which was mentioned in the building rpm tutorail that I reffered... The replacement to that package which was mentioned in the same post was unavailable.
View 8 Replies View RelatedI have tried re-installing system-config-network.
root@localhost:/home/kbriggs> system-config-network
Traceback (most recent call last):
File "/usr/sbin/system-config-network-gui", line 48, in <module>
gettext.bind_textdomain_codeset(PROGNAME,locale.nl _langinfo(locale.CODESET))
AttributeError: 'module' object has no attribute 'nl_langinfo'
My current setup has the following partition:
sda1: ubuntu 32-bits
sad2: ubuntu 64-bits
sad3: ext3 system for personal storage
sda4: swap
My idea is to format my sda2 to become ntfs and install a windows xp system.., my question is how this could affect my current grub2 config since the MBR loads from sda1?
I know very little about Debian but have an ASUS T100TA tablet which runs fairly well under Debian 8 Jessie (kernel 3.16.0-4-686-pae). I used the following guide successfully to activate the wireless but am having trouble with the audio section of it.URL...
First, I went here and downloaded the file called 'NEW T100_B.state'.URL....
Then I copied it to /var/lib/alsa/asound.state and ran 'alsactl restore' which reported that i had no soundcards.I then downloaded and expanded linux-firmware-master-intel.tar.gz but am not sure what to do with these files. I copied them to /lib/modules/3.16.0-4-686-pae/kernel/drivers/firmware as they are specific for this kernel, but they don't seem to be doing anything and 'alsactl restore' still tells me that I don't have a soundcard. What do I need to do with these files?