Debian Configuration :: Usage Of SMTP With Temporarily Connected Network?

Jun 15, 2011

I'm currently running my own postfix server which is the MX for my domain. This is hosted in my house at the moment on the end of an ADSL line with a static IP. However, I'm trying to go totally mobile so I can kill the ADSL and the line rental and switch to 3G. Does anyone know a solution which allows me to accept (or ask for delivery) of SMTP when temporarily connected and queues it externally? Sort of like a hosted mail queue which pumps SMTP onto my laptop only when I ask it to.

View 2 Replies


ADVERTISEMENT

Debian Configuration :: Network Manager Says No Internet Is Connected

May 16, 2011

I just installed, and evolution doesn't seem to think it has internet. The icon with the power cord in the bottom left is unplugged, and send/receive is greyed out. Internet is working , but it is not using network manager, since network manager says no internet is connected. Maybe this has something to do with it?

View 1 Replies View Related

Debian Configuration :: Network-manager & Auto Scanning While Connected

May 6, 2010

I'm trying to use network-manager in sid and it's incredibly frustrating because every 2 minutes or so it seems to scan for wireless access points, during which time my SSH connections completely hang and screw up. Pings start dropping packets as well. By doing an "iwlist scan" I can reproduce the behavior. Has anyone else dealt with this? I haven't been using network-manager, but I am currently due to mobility and needed VPN functionality... WICD with no network-manager works better but there's no gui-based VPN support. I've got an Atheros wireless device and I've read that supposedly it should be doing background scanning since kernel 2.6.32, but I haven't seen anything like that, and I'm on 2.6.32-5-amd64 currently, 2.6.32-3-amd64 behaves the same too.

View 4 Replies View Related

Debian Configuration :: Connection WPA Personal Says Connected To Wl Network But No Internet Connection

Apr 15, 2011

1 linksys router: gets the net from PPPOE and give the network DHCP. The router IP is 192.168.1.1. 1 windows laptop that work wireless and wired. 1 debian desktop that work wired and not working wireless. THe problem with the debian desktop is like this: I have a TP-Link TL-WN321G installed and found by lsusb command. I make a wireless connection WPA Personal (just like the router settings) it says i am connected to the wl network but no internet connection. the route command give me this:

[code]....

I tryed with wicd who said that the connection is WEP (and it's not, it is setup to WPA on the router and the network-manager conncetion) and when i try to connect i get bad password. I tryed with network-manager uninstalled and no chance.

View 4 Replies View Related

OpenSUSE Network :: Find Out Network Usage / Keep Track Of Total Network Usage?

May 24, 2010

How do I find out the network usage ie the total amount of data is transferred in or out of my computer (openSUSE 11.2 and gnome) and keep a track of the total network usage?

View 1 Replies View Related

Debian :: NetworkManager Applet Shows No Network While Connected - Wired Network Device Not Managed

Oct 30, 2010

I'm running Squeeze and I'm looking 3 days now for a solution in some weird problem. The NetworkManager Applet shows that there isn't connection although I am connected. The icon has this small "x" and when mouseover it says "No network conncection". Moreover when left clicking it, it says

"Wired Network Device not managed"

While I was looking for the solution a came across this post by an Ubuntu developer who says:network-manager-applet displays the connectivity state of network-manager's managed interfaces not every interface. So the title "network manager says disconnected but is connected and working" is actually misleading. The interface is connected and working but not from network-manager's point of view since it is not managing the interface. Additionally, in Lucid now network-manager applet displays nothing now for non-managed interfaces so is less misleading. You can check to see whether or not an interface is managed by network-manager by using the command line too nm-tool. You'll see "State: unmanaged" for unmanaged interfaces.

View 14 Replies View Related

Debian Configuration :: 98% CPU Usage With Browser And LightDM

Jun 19, 2015

Just made a strange discovery, visiting the website: [URL] .... with iceweasel within university's network makes my computer almost unusable. htop's output indicates:

USER: 'root' CPU: '98%' Command: '/usr/bin/X :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch'

What this meant to be and/or how this could be circumnavigated?

View 0 Replies View Related

Debian Configuration :: Limiting Resource Usage

Sep 10, 2015

Got a few more questions from the Debian Security Howto.

Section "4.11.2 Limiting resource usage: the limits.conf file" page 44

Code: Select allnano /etc/security/limits.conf

At the bottom I get...

Code: Select all#<domain>      <type>  <item>         <value>
#
#*               soft    core            0
#root            hard    core            100000
#*               hard    rss             10000

[code]...

Do I have to uncomment these lines for them to take effect?

View 2 Replies View Related

Debian Configuration :: 100% CPU Usage While Idle / Workaround It?

Apr 13, 2011

I just installed Debian 6.0 IA64 on my HP zx6000 and it pegs the CPU's when doing absolutely nothing but sitting at the desktop. I searched around on Google and found that there is a bug report: 537572. I was just wondering what the status was on that. Is there currently a fix or workaround?

zx6000 specs: 2 x 1.50GHz Intel Itanium 2 (Madison 6MB), 8GB of PC2100 ECC, 73GB 10kRPM SCSI, NVIDIA Quadro4 900 XGL 128MB.

View 8 Replies View Related

CentOS 5 :: SMTP Service's Can't Connected On Qmail (5.4)

Aug 18, 2011

I have installed qmailrock on my CentOS 5.4, finishing installation until sucees to launch webmail via GUI (squirrelmail). but my smtp service (:25) is always failed to connect.I can telnet on port 110, 80, etc. But on port 25, the result is not shown comment 220 oK.when i check using : qmailctl stat here the result :

/service/qmail-send: up (pid 26403) 5 seconds
/service/qmail-send/log: up (pid 26404) 5 seconds
/service/qmail-smtpd: up (pid 26455) 0 seconds

[code]....

FYI, i have installed postfix before, but i've un-install it using yum remove.

View 3 Replies View Related

Debian Configuration :: Projector Not Detecting When Connected?

Nov 5, 2010

When I connect my laptop to projector, its not detecting. But when I log-off and then log-in it automatically detects the display. I tried function key, but its not working. I am using Debian Lenny also. Also several others with different version of ubuntu running on different laptops reports the same problem. I tried searching net, but couldnt find a good answer.It would be helpful if some one explains what exctly is happening and an easy work around for this problem.

View 1 Replies View Related

Debian Configuration :: Connected To Internet Yet Server Not Found?

Sep 20, 2010

I just reinstalled debian on my computer, I've had it working for a long time, only difference is I used to have Cable Internet and now I use DSL. Anywho, I reinstalled debian from the kde CD on the debian website, it auto-configured my network out of the box. My network is connected to the computer, pinging google works perfectly, and ifconfig shows that eth0 is working correctly without any errors. However on both Konqueror and Iceweasel, every time I try to connect to a website, it tells me the server cannot be found. Basically it acts like I don't have internet. Using the terminal works though, I have installed KDE-FULL from the terminal and wicd, so I know I do have internet. I don't know what it could be, like I said, I installed from the cd and this happened. Maybe there's a bug on the KDE debian cd

View 14 Replies View Related

Debian Configuration :: Networking: Connected To Wifi, Webpages Won't Resolve?

Oct 2, 2010

I just installed Debian with the latest testing iso, and I'm having problems connecting to the web via browser. I can ping hostnames (i.e. google.com, debian.org, etc.) from the terminal and it resolves just fine, but if I try to load a page from Iceweasel or Epiphany it says the page won't load because it can't resolve the hostname. Can someone tell me what I'm missing?the detail that I'm running amd64. I've checked iptables and found no entries, and for good measure I flushed it to be certain. I also checked resolv.conf but that looked normal, just a nameserver entry pointing to my home router. I'm new to Debian, but have used Linux for years, and I'm genuinely stumped. I'm sure the solution will smack me in the head for its simplicity, but nonetheless I need at least a shove in the right direction.

View 2 Replies View Related

Debian Configuration :: Power Usage (laptop Battery) And Zen Interactive Tuning?

Jun 17, 2015

Since according to liquorix.net the kernel

Code: Select alluname -a
Linux t 4.0-5.dmz.3-liquorix-amd64 #1 ZEN SMP PREEMPT Debian 4.0-12 (2015-06-14) x86_64 GNU/Linux

incorporates Zen Interactive Tuning and this

[URL] .... wrote:Tunes the kernel for responsiveness at the cost of throughput and power usage.

View 2 Replies View Related

Debian Configuration :: Bluez Gatt Tool Not Connected To Hcix Device

Apr 19, 2016

Using jessie over 4.2.8 or 4.3.4 kernel.

Used both the default bluez package, 5.23 and building bluez 5.36 by hand.

hciconfig shows a good configuration,

hci0: Type: BR/EDR Bus: UART
BD Address: 78:A5:04:31:3C:4B ACL MTU: 1021:6 SCO MTU: 180:4
UP RUNNING
RX bytes:82105 acl:0 sco:0 events:1989 errors:0
TX bytes:516 acl:0 sco:0 commands:48 errors:0

hcidump -x does show Commands/Events received, beacons are being seen, and collected by our app.

> HCI Event: LE Meta Event (0x3e) plen 42
LE Advertising Report
ADV_IND - Connectable undirected advertising (0)
bdaddr F9:77:66:E8:F7:8B (Random)
Flags: 0x06

[Code] ....

However when the app tries to connect it always gets connection refused at gatt_connect.

gatttool behaves the same way, and hcidump does not show any connection attempts, implying no connection between gatttool and the device, although it is specified on the command line.

Finally although the bluetoothd is running bluetoothctl also shows no default controller found. I had edited /etc/bluetooth/uart.conf, adding an hciattach entry for the device but that changed nothing when restarting the bluetoothd. Entering a garbage entry into that file does not produce any errors, so I am not sure it is even being read.

Also systemctl|grep bluetooth shows :-

sys-devices-virtual-bluetooth-hci0-rfkill0.device loaded active plugged /sys/devices/virtual/bluetooth/hci0/rfkill0
sys-devices-virtual-bluetooth-hci0.device loaded active plugged /sys/devices/virtual/bluetooth/hci0
sys-subsystem-bluetooth-devices-hci0.device loaded active plugged /sys/subsystem/bluetooth/devices/hci0
bluetooth.target loaded active active Bluetooth

/sys/devices/virtual/bluetooth/hci0/address shows the correct MAC, but /sys/subsystem/bluetooth/devices/hci0 does not exist, a post elsewhere indicated this was not a problem but that seems odd.

Is the uart.conf file still used([URL] .... would suggest yes) and if so is the format a full hciattach command or merely the hciattach parameters?

View 1 Replies View Related

Debian Configuration :: Unable To Get Intel Pro/wireless 3945abg Connected To Router

Mar 2, 2010

I am unable to get my intel pro/wireless 3945abg connected to my router. The firmware has been installed and at first was even able to connect, but now the access point doesn't even show up in network manager. I am currently able to connect using a USB wireless adapter, but for certain reasons, would prefer to use the former. I've looked over this page with no results.

View 7 Replies View Related

Debian Configuration :: WiFi Router Doesn't Give Internet To Other Devices Connected

Oct 21, 2015

When I connect my Debian PC to my WiFi router my PC doesn't get internet if other devices are connected to it .

When i disconnect those devices and connect my Debian PC only then my PC connects to internet but other devices connected to it later do not get inernet connection.

When I connect my Debian PC using LAN Cable to the same router all devices work fine.

View 11 Replies View Related

Debian :: Network Bandwidth Usage Monitoring Application?

Jun 7, 2010

I just wanted to use a network bandwidth usage monitoring application. Scenario: I am using an EV-DO based USB broadband modem with a limited GB plan. For additional data usage they charge per MB. Currently I use either wvdial (mostly) or pon to start the connection. So if there is any network monitoring application which could log time used and data used for the session, it would be great. Actually debian has too many different network monitoring applications, But I am not sure which one suits well for this purpose.

View 5 Replies View Related

Debian Installation :: Canon Mx860 Connected By WiFi To Network

Jan 9, 2016

Loaded Debian Jessie (x64) and when adding printers, can see my printer which attached ok to my RaspberryPi and can print thru it, but can not attach to my Jessie box. If it adds, it can't see it or reports printer is busy, tried every config I could find on the web. Previous versions of Debian I loaded the canon print driver separately and loaded the cnij(?) filter. Do I still have to do that? Is there a trick to getting a network canon to work?

View 3 Replies View Related

OpenSUSE :: Mc Hangs Temporarily When Network Is Down?

Mar 3, 2011

Midnight Commander startup is usually instantaneous, but when the network (eth0) is down, mct takes over a minute to start.This is a known problem. See:#40 (savannah: MC doesn't open if network gateway inaccessible.) (07 Jan 2007)for example. The problem seems to be caused by mc's use of samba. Is there a known solution or circumvention? The above file advises me to "comment out the eth0 interface from the smb.conf "; however, my /etc/samba/smb.conf seems to have no eth0 interface.The "man mc" file mentions that "smbfs" is one of the virtual file systems used internally by mc. I tried reducing the "vfs" timeout in the ".mc/ini" file from 60 to 5, but this had no effect on the startup time.

View 5 Replies View Related

Ubuntu Networking :: Wifi Is Connected But Will Not Work In Browser Or Other Internet Usage

Jul 6, 2010

The Wifi is connected to my router but it still will not let me access the Internet or any other Internet based operation. (I am running 10.04, I had just installed and and now am trying to get the internet connection running)

View 6 Replies View Related

Debian Configuration :: Getting Network Error - Every Time Rebooting My Server Lost My Network Config

Mar 3, 2011

I was playing with my debian server when something went totally wrong while i was editing something on my network interface,i removed those crap that i wrote and left the network interface configuration as it was

Like for example after re-editing my network interface,it was like :

As i did a network restart, i get this error saying :

There is already a pid file /var/run/dhclient.eth0.pid with pid 2802 killed old client process, removed PID file.

What is this error and how can i fix it,because every time im re booting my server i lost my network config.

View 1 Replies View Related

Debian Configuration :: Network Not Work When Use 2 Network Cards

Oct 24, 2010

I'm planning to use Debian as the OS for a firewall machine, which will sit between my internet connection and the rest of my computers. Now my network is all wired, no wireless whatsoever. I'm using the onboard the motherboards cat5 socket which seems to be using the VIA rhine driver and I'm also using a 3com 100MBps card.

I can list the machine spec if you want but it's nothing special, an old Athlon 64 rig with 1gb ram and an OEM motherboard, it all seems to work ok apart from the internet doesn't' seem to work. Lenny seems to detect both cards ok and I even used the net install CD and it managed to download everything using the 3com card.

The strange thing is when I'm in Lenny, I can't seem to connect. I can ping google, but when I try and view a webpage, the browser just sits there with a while screen... Could it be that using 2 network cards is confusing Debian? Right now I've only got the modem hooked up the the 3com card, and nothing connected to the onboard network card.

View 5 Replies View Related

Ubuntu :: Postfix Smtp Configuration

May 13, 2010

I'm running Postfix primarily as a local email server. There is no email coming in from other machines, and there are no other machines using it to send mail. But I'd like it to be able to send mail. I use Evolution for my normal email stuff, and it's configured to send mail to my ISP's smtp server, and that's working fine. But I occasionally send mail from the command line, using the "mail" or "mutt" utilities. (Mutt because the standard mail doesn't support attachments.) These don't use Evolution's configuration, they depend upon whatever is listening to port 25 - and that's Postfix. So all I should need to do is to give Postfix the smtp server, user name, and password. My problem is that Postfix has voluminous documentation online, and I haven't been able to find this simple configuration in it.

View 3 Replies View Related

Debian :: Temporarily Change The Codepage That Is Used In A Terminal?

Mar 12, 2010

Is there any way to temporarily change the codepage that is used in a terminal?I'm using a couple of internet BBSes and since they're made in the stoneage they can't really handle UTF-8. So I wonder if there's a way to temporarily change the codepage in the terminal to Latin-1? It would also work with a ssh or telnet-client where you can change it. I've looked at putty but it seems to lack cut and paste and support for links which makes it less usefull for me.

View 1 Replies View Related

Ubuntu Servers :: Postfix Smtp Client Configuration For Port 465?

Jan 2, 2010

configuring my postfix server to send mail over smtps port 465. My ISP (as is the case with many ISPs), is blocking outbound SMTP, so I need to configure postfix to relay my mail out through my ISPs SMTP servers.

I was able to get it to work with gmail, which uses port 587, by using SASL: [URL] but that configuration is less than ideal as gmail drops the "reply to" address so when people receive my email, it looks like it's from gmail instead of from my server.

If I use my ISP SMTP servers as a relay the "reply to" address is not stripped, but the relay uses ssl over port 465 instead of TLS. According to the SASL readme:

Quote:

Postfix does not deliver mail via TCP port 465 (the obsolete "wrappermode" protocol). See TLS_README for a solution that uses the "stunnel" command.

I've looked at the TLS_README and can't figure out what I need to do. how to configure this?

View 7 Replies View Related

Debian Configuration :: Network Manager Is Quirky In KDE Debian

Feb 14, 2011

I have a new install of Debian Squeeze from debian-6.0.0-amd64-kde-CD-1.iso but I'm experiencing problems with the wireless internet applet in the taskbar.When the computer boots, it doesn't connect automatically eventhough I have it set as such. I have to fiddle with it until I get the request from KDE Wallet Manager to insert the password to complete the connection. I didn't have this behavior in Kubuntu.

View 1 Replies View Related

Ubuntu :: Postfix / Gmail Smtp Configuration Failure To Authenticate / Create Tls Connection

Jun 29, 2010

I'm trying to configure postfix on an ubuntu virtual machine to use gmail as a relay client. For the past two days I have been in and out of the logs, changing parameters and blindly following tutorials but I can't get anything to work properly. So far I've narrowed my problems down to tls connection establishing and a failure to authenticate, judging by the local emails I've received from "The mail system".

View 2 Replies View Related

General :: Networking - Network Card - Connected To Network - Given Access Point - No Connection?

Apr 3, 2010

I installed the driver for my network card. iwconfig and ifconfig are all responsive to connecting to the network, I'm given an access point address. Then, I try to connect to a website and no dice. ping www.google.com yields no result. What gives?

View 2 Replies View Related

Debian :: Can't Save Network Configuration

Jan 18, 2010

I'm opening up Network and it asks me for the root password. I enter it and the program comes up. I enter a static address for both eth0 and eth1.

I don't see a Save button. Eventually I get out of the configuration tool. The next time I run the tool, my static addresses have not been saved.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved