I just installed Debian 6.0 IA64 on my HP zx6000 and it pegs the CPU's when doing absolutely nothing but sitting at the desktop. I searched around on Google and found that there is a bug report: 537572. I was just wondering what the status was on that. Is there currently a fix or workaround?
zx6000 specs: 2 x 1.50GHz Intel Itanium 2 (Madison 6MB), 8GB of PC2100 ECC, 73GB 10kRPM SCSI, NVIDIA Quadro4 900 XGL 128MB.
i've just installed squeeze on my lenovo t61 laptop. i've noticed one of my cpu's running at 100% (even in idle) from time to time.
View 3 Replies View RelatedI keep noticing disk activity every roughly 1 to 3 seconds even though there is "nothing" going on. Of course, I run a number of "system" and "user" application packages - Apache2, MySQL, Browsers (Opera, IceWeasel), an SMB client and server, OpenOffice 3.0RC8 being the most prominent ones. I wonder what might be the cause for this constant disk activity which happens even when none of the applications do any noticeable work at all. Is there a way to determine the process that does those disk read/writes?
View 6 Replies View RelatedJust made a strange discovery, visiting the website: [URL] .... with iceweasel within university's network makes my computer almost unusable. htop's output indicates:
USER: 'root' CPU: '98%' Command: '/usr/bin/X :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch'
What this meant to be and/or how this could be circumnavigated?
Got a few more questions from the Debian Security Howto.
Section "4.11.2 Limiting resource usage: the limits.conf file" page 44
Code: Select allnano /etc/security/limits.conf
At the bottom I get...
Code: Select all#<domain>Â Â Â <type>Â <item>Â Â Â Â Â <value>
#
#*        soft  core      0
#root      hard  core      100000
#*        hard  rss       10000
[code]...
Do I have to uncomment these lines for them to take effect?
I'm currently running my own postfix server which is the MX for my domain. This is hosted in my house at the moment on the end of an ADSL line with a static IP. However, I'm trying to go totally mobile so I can kill the ADSL and the line rental and switch to 3G. Does anyone know a solution which allows me to accept (or ask for delivery) of SMTP when temporarily connected and queues it externally? Sort of like a hosted mail queue which pumps SMTP onto my laptop only when I ask it to.
View 2 Replies View RelatedSince according to liquorix.net the kernel
Code: Select alluname -a
Linux t 4.0-5.dmz.3-liquorix-amd64 #1 ZEN SMP PREEMPT Debian 4.0-12 (2015-06-14) x86_64 GNU/Linux
incorporates Zen Interactive Tuning and this
[URL] .... wrote:Tunes the kernel for responsiveness at the cost of throughput and power usage.
what should be idle yum configuration of fedora 11? so that I can download and install mp3 files likes vlc player, mplayer-gui and real player....
View 7 Replies View RelatedI'm trying to install Adobe Air on a 64bit Debian system but just can't get it to work. All the instructions I can find on the net are for Ubuntu and I've tried to modify them for Debian but with no luck.
Is there a write up for installing it anywhere around?
I have a Debian etch system I haven't fired up for about a year because the mobo went bad.I had one user setup, I hammered it with all my normal passwords and finally got a prompt that said 'Access Denied'So my understanding is that I figured out my PW, but for some reason this user doesn't have access anymore.Is there a workaround for this? I am just trying to retrieve some files from the drive I don't have a problem formatting it.
Also I tried hooking it up to a windows machine:I loaded Ext2 IFS, it recognizes the drive, but says it can't load it - something to do with the headers being closed out improperly, and basically said I would have to boot it in linux then try it in windows.I tried this after I got to the linux logon prompt (the bootloader had scanned the drive because it hadn't been scanned for x amount of days), this didn't help Ext IFS read the drive.
When I run top d 0.5 on my machine and I press 1 to enable the SMP View, I notice that all of the CPUs keep toggling between 100%idle and 0% idle.
The odd part is that when a CPU goes to 0.0% idle, I would expect to see one or more of the other columns peek, but they are not.
What is causing this?
Code:
I had noticed that my workstation (running debian testing) is having a constant load of about 0.9 (+/-0.1), even while the system is completly idle.The system starts with a normal load and then goes up to about 0.9 within a few minutes and then will stay there forever (well it can get higher, but never lower). This is the load graph after the system runs some time: URL....
I have tried everything I know to find the cultprint but there is no cpu usage and no io usage. I even have disabled the desktop and still have this problem.Also I have tried booting an older Kernel (4.1 and 3.16) with no difference in the load.Here is some information about my system:
Code: Select all» uname -a
Linux localhorst 4.2.0-1-amd64 #1 SMP Debian 4.2.3-2 (2015-10-14) x86_64 GNU/Linux.
I boot it and let him stay alone without even log-in,then thru my local LAN I access the server with SSH or FTP, everything just works fine,but if I just let the server idle for a while, I stop being able to login to the server again.I get no response, and when I go check it , monitor is black, like its sleeping,Then I just press a key on the keyboard, it wakes, and I can login from the server itself.so it does not crash.But login from another computer still doesn´t work,I have to reboot the Linux server to work, and all this idle thing starts over again.
View 3 Replies View RelatedThis is my first day with Debian, I have used other distros, and am a long time linux user. My HP D 1600 series is recognized, but when I try to print a test msg. it says sent, but the printer remains idle. I have tried everything I know. When I run the trouble shooter I get this. /// /usr/lib/cups/backend/hp failed////
In the past when having a printer problem I have installed HPLIP-gui and removed the printer then re-installed it. That has not worked and I cannot even remove the printer.
I am a newbie when it comes to linux, but know a little (the little bit of dangerous stuff).I have set up a home web server for when I am testing website using PHP, mysql and other funky stuff. This is a reflection of my production server as far as I can with my limited knowledge.I am also using this box to learn more about the Linux operating system and I doing this slowly. Before I installed the GUI (Gnome) I was using a text based server, this was working fine and running absolutey fine and never disconnecting. This has been fine and working 24/7 for around a month.
At the weekend (just gone) I ran the following at terminal
# apt-get install gnome
This gave me a GUI so I could try some other things.
When the computer is idle the network card seems to drop the connection, Im trying to see after how long it does this. I have seen this work fine after an hour, but after a night, the network has been dropped. This is a hard wired connection to the router.first time I thought the PC had froze so rebooted the PC, but the second time, I plugged a mouse into it and noticed the the network icon had changed, after right clicking on it, i noticed that It had dropped the connection. After clicking the "reconnect" option it is back up and running.
I am trying to switch over my NAS from Win7 x64 to Debian 8.x Jessie. I have run into a few issues with the power management. When Idle my NAS should be consuming 25W, however it was consuming much more. The more hard disks I mounted, the higher the wattage.
I have followed a few tutorials but that has only been a partial succes.
Code: Select all # hdparm -C /dev/sd[b-y]
/dev/sdb:
 drive state is: active/idle
/dev/sdc:
 drive state is: active/idle
/dev/sdd:
 drive state is: standby
/dev/sde:
 drive state is: active/idle
/dev/sdf:
 drive state is: standby
All the drives can spindown but they are not doing that now that they are mounted.
hdparm:
Code: Select all/dev/disk/by-id/ata-SAMSUNG_HD103UJ_S13PJ9AQC12015 {
apm = 127
keep_features_over_reset = on
spindown_time = 60
[Code]....
Now there are two suggestions I found but both I was unable to implement.
The first suggestion was to mount using "noatime". However I do not know how to rewrite fstab because I am using ntfs for now (at least untill I get it working).
Code: Select all# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
#
/dev/mapper/bugattidebian--vg-root / ext4 errors=remount-ro 0 1
[Code] .....
Not sure where to add the noatime there...
Also I am using samba on all those drives. This guide suggested a code change but the example does not line up with my configuration script.
I am working in a office where only one internet connection available. I have configured 5 other client machines to use internet through squid proxy server. Now I want to restrict the total data usage/transfer (upload+download) to say 1 GB during a calender month. How can I achieve this setting.
View 1 Replies View RelatedI am working in a office where only one internet connection available. I have configured 5 other client machines to use internet through squid proxy server. Now I want to restrict the total data usage/transfer (upload+download) to say 1 GB during a calender month. How can I achieve this setting.
View 1 Replies View RelatedI'm having some problems with banshee that started about 6 months ago. Banshee remains idle and does not play any type of music file. I've tried installing and selectively installing Gstreamer codecs with no success. I'm running stretch.
View 8 Replies View Relatedi've gotten my fedora 12 to the point where i can run python3 scripts from command line and can call up python 2.6.2 idle with the command 'idle' from command line. what command will call up python3 (3.1.2 to be exact) idle?
View 5 Replies View RelatedI was trying to get the status of memory usage and disk usage using sigar in windows and ubuntu. done this in windows by just copying the sigar library into jdk library. But i was unable to do so in ubuntu. I've copied the library to java-6-sun library but still can't run the program.
View 14 Replies View RelatedI'm running into a problem where my system is running out of disk space on the root partition, but I can't figure out where the runaway usage is. I've had a stable system for a couple of years now, and it just ran out of space. I cleaned some files up to get the system workable again, but can't find the big usage area, and I'm getting conflicting results.For example, when I do a df it says I'm using 44GB out of 58 GB:
Code:
[root@Zion ~]# df -h
Filesystem Size Used Avail Use% Mounted on
[code]....
Is there any way to monitor one process' CPU usage and RAM usage over time on Linux? I am trying to change to a cheaper VPS and need to work out what level of CPU and RAM I need!
View 2 Replies View RelatedI am newbie to Fedora.
I have installed Fedora 13 to my ASUS 1015P EEE PC netbook.
I have installed OOo_3.2.1_Linux_x86_install-rpm-wJRE_en-US.tar.gz using the installation manual from OpenOffice.org, however, when I clicked on Applications --> Office --> OpenOffice 3.2 Base/Calc/Impress or anything, nothing happened. The system still runs as normal, but nothing is opened.
There is an issue with kmenuedit. It was complaining that it couldn't write to /home/usuariokubuntu/.kde/share/config/kmenueditrc. But even running it with sudo, the behavior was strange (the applications weren't saved at the menu, and everything was very slow - like taking 40 seconds to create a new item at the menu). It seems that the problem was that the file /home/usuariokubuntu/.kde/share/config/kmenueditrc was setted as owner and group as "root". I've changed the ownership and the group of that file to the user owner of home (in my case, usuariokubuntu), and it is working fine now. So, I would life to report this, so developers can fix the issue. I've upgraded a completely clean instalation of kubuntu 9.04 to 9.10, so I don't know if the issue also happens when directly installing 9.10.
[Code]...
My 9.01 worked fine since upgrading to 10.04 i find the boot process hangs for about 30 secs displaying
'boot from (hd0,0)
Starting up'
I have googled this problem and the only thing i could find is that disconnection the dvd drives sorts it! but i cannot find a workaround.
I have the issue described in [URL]... Workaround A allows me to boot, but to make changes permanent, the above suggests I run the following command: echo options i915 modeset=1 | sudo tee /etc/modprobe.d/i915-kms.conf sudo update-initramfs -u But when I do this I am told that the 'u' parameter does not exist in tee. There are only 'a' or 'i' parameters.
View 2 Replies View RelatedWorkaround for: GPG Errors: If you get the following error message:Quote:W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used.GPG error: http://extras.ubuntu.com maverick Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 16126D3A3E5C1192W: Failed to fetch http://extras.ubuntu.com/ubuntu/dists/maverick/Release Run:
Code:
gpg keyserver keyserver.ubuntu.com recv 3E5C1192
gpg export armor 3E5C1192 | sudo apt-key add -
[code]....
Running natty. Main user account. In Ubuntu & Ubuntu Classic, both gnome, no keyboard or on-screen keyboard input. Compiz & metacity both bad. Mouse okay. Other user accounts okay. KDE okay.
Tracked problem to /home/{user}/.gconf/desktop/gnome/session/required_components/%gconf.xml. Removed file, problem goes away.
File contents:
<?xml version="1.0"?>
<gconf>
<entry name="windowmanager" mtime="1303412016" type="string">
<stringvalue>compiz</stringvalue>
</entry>
</gconf>
I'd been using Directadmin on my Debian 5.0 machine earlier . I had 1GB ram and a lot of memory was used up. Sometimes even the OS crashed as the programs couldn't allocate memory. I increased my RAM to 3GB but still the RAM usage sometimes just flow up to 1GB although normally DirectAdmin doesn't use more than 200MB . Restarting the server fixes the issue but then it climbs up again and comes down to a 200-400MB again by itself. Cached Memory was also being too much and sometimes even Swap Partition gets used up .Just to be sure that it's not the Bugged OS, today I installed the latest Debian 5.0.6 Net-inst on my machine . I allocated just 128MB of ram to it because it was just a testing machine. I installed it without the swap partition since I thought I will make a swap-file if it is required. I did not even update the OS rather I just installed Openssh-server and everything else was default as in Debian 5.0.6 . When server started, only 20MB ram was being used .
I just logged into my server afer about 5 hours and saw 112 MB ram being used out of which 91MB was cached. I haven't installed anything so why is this happening ?Why is this happening when I just installed the default Operating System and didn't even run an apt-get update on it.I think my previous operating system with Directadmin was also having similar issues.