Debian Installation :: Canon Mx860 Connected By WiFi To Network
Jan 9, 2016
Loaded Debian Jessie (x64) and when adding printers, can see my printer which attached ok to my RaspberryPi and can print thru it, but can not attach to my Jessie box. If it adds, it can't see it or reports printer is busy, tried every config I could find on the web. Previous versions of Debian I loaded the canon print driver separately and loaded the cnij(?) filter. Do I still have to do that? Is there a trick to getting a network canon to work?
View 3 Replies
ADVERTISEMENT
Oct 19, 2010
I've done a ton of searching and all I've found seems geared to having your printer/scanner connected via USB cable in order to get the scanner working. I have the printer working wirelessly but thus far no go on the scanner. I've downloaded and installed the scangearmp packages.
I've tried installing the sane package via git according to this blog but when I try to run configure I see this: mustek_usb2 backend requires pthread library - disabling and usb isn't listed among the installed backends. I don't even know whether I need usb because this is wireless, but after compiling I run scanimage -L and nothing comes up. I'm still a Linux newb, and have learned a ton in the past couple of days, but this one is stumping me.
View 1 Replies
View Related
Jun 6, 2010
I cannot print with my Canon MX860. I have downloaded the proper drivers from the Canon Europe website and forced the arch to x64 as described on many sites. When I try to print a test page I get the error that "Idle - /usr/lib/cups/filter/pstocanonij failed". I have checked in lib64 and pstocanonij was there as well. If I change the URI from USB to CNIJUSB then I get the error that "cnijusb has failed". It may be possible to get this working as in another forum someone claims to be successful. I am able to use the scanner with the sane-backends package, so that is not a problem.
View 6 Replies
View Related
Jun 2, 2010
I have Canon MX860 Multifunction USB/Wireless printer that I am trying to add in Fedora 13. Looking under Desktop > Computer via USB connection, the printer is detected as some hardware device I can mount and unmount. However, when I am trying to add this printer via System > Administration > Printing, the printer is not detected at all nor can I add. FYI, this printer works fine in Ubuntu 10.04 LTS. How I can make this printer working in Fedora 13?
View 5 Replies
View Related
Jul 21, 2010
I was wondering if there's any way for a laptop to be both simultaneously connected to a wireless network, while at the same time acting as an ad-hoc network with local access to serve as a wifi connection for my mobile device, which would be ssh-ing into the laptop and using local resources.
View 1 Replies
View Related
Apr 2, 2015
I love using wheezy but i keep having to take my computer downstairs to hook it up to router through ethernet, i need it to connect through wifi and stay connected.
heres my problem, if i use live image and connect to network its fine but during installation process it gets to the network configuration, it will keep disconnecting at dhcp and if i try and continue it gives me the error packages broken due to it not staying connected.
MY WIFI CARD IS A TP-LINK WDN 4800
if i try and just do a net install then it doesnt show my wifi network.
it uses in both cases ar93xx atheros driver for installing, i just need to know how i can try and keep a stable connection over wifi so it can install over wifi so i dont have to keep taking pc downstairs to install it.
i done something that stopped me being able to login into wheezy i was left at black screen with blinking command line, i have reverted to mint debian until i can get a stable connection over wifi to install wheezy again.
View 14 Replies
View Related
Jul 14, 2010
This may be more suited for the networking forums, but I figured Community Cafe would be well rounded enough for someone to tell me if this is even possible (with minimal configuration that is).There are a few places I travel where I only have a wired connection to the Internet (no wifi), but when this happens is there a simple way to create an adhoc network so wireless devices can route through my computer and to the network? Reason I'm asking is I'm thinking of getting an iPad or iPod Touch which have wireless connections, but in the cases where my laptop is using a wired ethernet connection and the wireless card isn't used, I'd like to create an adhoc wireless network that'll let such wireless devices work.
View 4 Replies
View Related
Jan 8, 2016
I have installed network controller driver(iwlwifi) in debian jessie and connected to wifi, but I could not connect to any web sites. I installed network-tools and input "iwconfig" it did show a wlan0 there.
Then I opened resolv.conf ,but there were 2 resolv.conf in my /etc,one contains "search lan nameserver 192.168.199.1",one contains "nameserver 8.8.8.8 nameserver 8.8.4.4".
I changed the content of the first one to 8.8.8.8 and restart networking,but I still could not open pages with wireless network.
And I open the first one again,and it changed back to 192.168.199.1,and an extra line "domain lan"above the line"search lan".
View 6 Replies
View Related
Oct 2, 2010
I just installed Debian with the latest testing iso, and I'm having problems connecting to the web via browser. I can ping hostnames (i.e. google.com, debian.org, etc.) from the terminal and it resolves just fine, but if I try to load a page from Iceweasel or Epiphany it says the page won't load because it can't resolve the hostname. Can someone tell me what I'm missing?the detail that I'm running amd64. I've checked iptables and found no entries, and for good measure I flushed it to be certain. I also checked resolv.conf but that looked normal, just a nameserver entry pointing to my home router. I'm new to Debian, but have used Linux for years, and I'm genuinely stumped. I'm sure the solution will smack me in the head for its simplicity, but nonetheless I need at least a shove in the right direction.
View 2 Replies
View Related
Oct 21, 2015
When I connect my Debian PC to my WiFi router my PC doesn't get internet if other devices are connected to it .
When i disconnect those devices and connect my Debian PC only then my PC connects to internet but other devices connected to it later do not get inernet connection.
When I connect my Debian PC using LAN Cable to the same router all devices work fine.
View 11 Replies
View Related
Oct 30, 2010
I'm running Squeeze and I'm looking 3 days now for a solution in some weird problem. The NetworkManager Applet shows that there isn't connection although I am connected. The icon has this small "x" and when mouseover it says "No network conncection". Moreover when left clicking it, it says
"Wired Network Device not managed"
While I was looking for the solution a came across this post by an Ubuntu developer who says:network-manager-applet displays the connectivity state of network-manager's managed interfaces not every interface. So the title "network manager says disconnected but is connected and working" is actually misleading. The interface is connected and working but not from network-manager's point of view since it is not managing the interface. Additionally, in Lucid now network-manager applet displays nothing now for non-managed interfaces so is less misleading. You can check to see whether or not an interface is managed by network-manager by using the command line too nm-tool. You'll see "State: unmanaged" for unmanaged interfaces.
View 14 Replies
View Related
Jul 31, 2011
I have a canon printer which was working so far. After my latest upgrade its giving errors saying "Printer not connected -- Check your connection" Fortunately I had a backup of my root before the upgrade and one difference I see is that on the new system theres no /dev/usb/lp0 which there is on the old one. So how do I make it? Or should I use the /dev/lp0? Note they are different:
[Code].....
So (naturally) when I tried to make a softlink from /dev/usb/lp0 to /dev/lp0 it did not work.
View 10 Replies
View Related
Apr 15, 2010
This is my first attempt with Yum and Fedora for that matter. I need to load a print driver and network driver for an MX860 printer. I downloaded the drivers and they are in the download folder. When I try to install I get what is below. How do I resolve? Do I need to identify where the driver is? If so, how?
[compaq@compaq ~]$ su -c'yum install cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz'
Password:
Loaded plugins: refresh-packagekit
updates/metalink | 15 kB 00:00
Setting up Install Process
No package cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz available.
Nothing to do
[compaq@compaq ~]$
View 14 Replies
View Related
May 16, 2011
I just installed, and evolution doesn't seem to think it has internet. The icon with the power cord in the bottom left is unplugged, and send/receive is greyed out. Internet is working , but it is not using network manager, since network manager says no internet is connected. Maybe this has something to do with it?
View 1 Replies
View Related
May 6, 2010
I'm trying to use network-manager in sid and it's incredibly frustrating because every 2 minutes or so it seems to scan for wireless access points, during which time my SSH connections completely hang and screw up. Pings start dropping packets as well. By doing an "iwlist scan" I can reproduce the behavior. Has anyone else dealt with this? I haven't been using network-manager, but I am currently due to mobility and needed VPN functionality... WICD with no network-manager works better but there's no gui-based VPN support. I've got an Atheros wireless device and I've read that supposedly it should be doing background scanning since kernel 2.6.32, but I haven't seen anything like that, and I'm on 2.6.32-5-amd64 currently, 2.6.32-3-amd64 behaves the same too.
View 4 Replies
View Related
Jun 15, 2011
I'm currently running my own postfix server which is the MX for my domain. This is hosted in my house at the moment on the end of an ADSL line with a static IP. However, I'm trying to go totally mobile so I can kill the ADSL and the line rental and switch to 3G. Does anyone know a solution which allows me to accept (or ask for delivery) of SMTP when temporarily connected and queues it externally? Sort of like a hosted mail queue which pumps SMTP onto my laptop only when I ask it to.
View 2 Replies
View Related
Mar 28, 2011
I am new to this and have no idea what I am to do.....I had Fedora 14 installed on my computer. I have Centurylink as my Internet network. Is there someone who can tell me how to get connected to my centurylink wireless network?
View 4 Replies
View Related
Dec 30, 2010
I have a Canon PIXMA MG5250 stand alone wifi printer thats connected to all my windows computers and laptops. Now I want to install a computer with Ubuntu 10.10 and connect this printer also wireless by wifi.
View 9 Replies
View Related
Jun 7, 2010
I installed ubuntu in my laptop. I cant able to use wifi in my laptop. Tell me how to configure the wifi in my laptop. My laptop model is aspiro 5378 (Acer).
View 7 Replies
View Related
Jun 16, 2010
I have a netgear wg111t that is running with ndiswrapper. It has an atheros chipset, but calling it ath0 didn't work.
Heres /etc/network/interface :
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface auto lo
iface lo inet loopback
View 6 Replies
View Related
Mar 23, 2010
WiFi on this laptop worked fine for a few months then went out; after a reinstall of ubuntu (since 9.xx had come out since then anyway) the wireless still refused to even see networks, let alone connect to them; under Wireless Networks in the NM, I just see a greyed out 'disconnected'. This got me to thinking that it may have just been a hardware issue, but I find that hard to believe. Anyway, here's the pertinent information:
Started off with an lshw command just to see if a network adapter is even listed as being connected: `lshw`
Code:
id:
network:1
description: Wireless interface
product: PRO/Wireless 2200BG [Calexico2] Network Connection[code]....
As an addendum : I found this driver project but they claim to require a 2.6.8+ kernel; a quick `uname -r` shows that mine is 2.6.31, and an `apt-cache search linux-image` reveals that to be the highest available from repos; do Debian/Ubuntu distros not use more recent kernels or is this an Ubuntu-specific kernel naming scheme? If so, to what would it be comparable? I'm hesitant to try to install this and change my firmware if it's likely I'll be borking something.
View 9 Replies
View Related
May 20, 2011
I bought a USB wireless adapter for my desktop. I finally got it to partially work using firmware-ralink as described [URL]sing network manager it will pick up my wireless network. However it will not connect to it.
The output of iwconfig is
wlan0 IEEE 802.11bg ESSID:"familyfarm"
Mode:Managed Frequency:2.437 GHz Access Point: 00:1C:DF:B6:EA:B9
[code]...
View 5 Replies
View Related
Dec 30, 2014
I have been replacing XP with Debian wheezy on my fathers in-laws old Dell SX280.
It uses a wifi USB dongle labelled as a TP-Link TL-WN321G.
lsusb reports it as Ralink RT2070 with ID 148f:2070
The interface is configured only using /etc/network/interfaces using
auto wlan0
allow-hotplug wlan0
iface wlan0 inet dhcp
wireless-essid MYSSID
wireless-key s:MYKEY
The network works for a few minutes, and then falls off the network. I am pinging the router IP address so it's not DNS
running dhclient wlan0 immediately restores the network, but it then fails again after a few minutes
I have tried using the standard stable kernel along with packages firmware-linux (pulls in free and non-free) along with firmware-ralink
I have also replaced all of the above packages and the kernel from wheezy-backports; it makes no difference
in dmesg it says it is using firmware rt2870.bin
I can't figure out why it falls off the network, it didn't in XP. The PC only 5 metres from the AP with a very strong signal.
View 0 Replies
View Related
Nov 21, 2010
is the following (btw I'm new to linux) - installed f14, connected to WiFi from my home router, started Firefox, and it was not able to open any pageslong with that I successfully updated my system and applications (and even installed new ones) through the same internet connection.Being connected to WiFi on my workplace I am able to browse with firefox, but at home - not...What could be the problem? What additional info should I give?PS. Sorry if the problem was already addressed, I am trying to find the solution on the web - but no success. Also 1-day discussions on ru-net forums were not successful, unfortunately.
View 4 Replies
View Related
Dec 2, 2010
I just installed Fedora 14 i386, and Fedora can see the wireless network just fine. I try to connect and nothing happens. It asks for the PSK constantly (yes, I promise I'm entering it correctly), even after I enter it correctly (I guarantee). I've searched around here a bit, but due to my limited knowledge in linux system I can't figure it out
1.
Code:
lsusb
Bus 002 Device 002: ID 1737:0071 Linksys WUSB600N Dual-Band Wireless-N USB Network Adapter
2.
Code:
iwconfig
lo no wireless extensions.
[Code]....
View 1 Replies
View Related
Dec 19, 2010
i installed Ubuntu 10.10 on my desktop computer, the live cd worked fine. my wifi worked there. but after installation completion i didnt get any screen. all black. nothing after the grub menu. i dettached my TP-Link TL-WN353G wireless PCI card and it worked fine. now what to do?strange, the wifi card works fine on Ubuntu Live CD and on win XP. please guidei have tried deleting quite and splash during boot upduring boot i pressed 'e' and deleted quite and splash and then ctrl-X but still the same result. the screen goes black. no graphics after grub menu.
View 2 Replies
View Related
Feb 14, 2011
I have installed Ubuntu 10.10 over windows 7. i have made a new active wireless connection (home wifi) and it was successful and is now connected to the home wifi but when i start up firefox to surf the net it says cannot display page.
View 1 Replies
View Related
Sep 21, 2015
I use a 'wifi hotspot' provided by my mobile (android) phone for internet/email and to connect to my wifi capable HP p1102w printer. Installation and use of the printer worked perfectly until I bought a new phone, again android with 'wifi hotspot' capability. The wifi connection on my new phone works fine for internet and email but it totally fails to detect my printer.
I have tried to detect and connect to the printer using system-config-printer and using the HP utility hp-setup. Both fail to detect the printer on the 'new' wifi network.
The old network connection which detects the printer as expected gives the following output:
Code: Select allpat@debian:~$ ifconfig
eth0   Link encap:Ethernet HWaddr 6c:3b:e5:91:ec:0cÂ
     UP BROADCAST MULTICAST MTU:1500 Metric:1
     RX packets:0 errors:0 dropped:0 overruns:0 frame:0
     TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
     collisions:0 txqueuelen:1000
     RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
[Code] ....
The new (problematic) network connection which fails to detect the printer gives the following output:
Code: Select allpat@debian:~$ ifconfig
eth0   Link encap:Ethernet HWaddr 6c:3b:e5:91:ec:0cÂ
     UP BROADCAST MULTICAST MTU:1500 Metric:1
     RX packets:0 errors:0 dropped:0 overruns:0 frame:0
     TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
     collisions:0 txqueuelen:1000
     RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
[Code] ....
View 4 Replies
View Related
Feb 7, 2010
I'm installing Squeeze on on a Dell Latitude D830 laptop with a Broadcom BCM4328 wireless network card, and I'm stuck on getting wireless internet to work. I have the 2.6.32-trunk-686-bigmem kernel. I run KDE and I have knetworkmanager installed to sort the network connections out. Unfortunately, knetworkmanager cannot find any wireless networks for eth2 (the wireless adapter). There is a wireless network, as other equipment can still connect to it.
I've installed the broadcom-sta drivers according to http://wiki.debian.org/wl. When I run iwconfig, I receive the following output: eth2 IEEEE 802.11abgn ESSID:"" Mode:Managed Frequency: 2.412 GHz Access Point: Not-Associated Bit Rate: 14 Mb/s Tx-Power:off Retry min limit: 7 RTS thr:off Fragment thr:off Power ManagementMode: All packages received Link Quality=5/5 Signal level=0 dBm Noise Level=0 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 missed beacon:0
[Code]...
View 5 Replies
View Related
Jan 24, 2011
I'm looking to be able to view the connected clients within the OpenWrt 10.03 software.
View 1 Replies
View Related
