OpenSUSE :: Mc Hangs Temporarily When Network Is Down?
Mar 3, 2011
Midnight Commander startup is usually instantaneous, but when the network (eth0) is down, mct takes over a minute to start.This is a known problem. See:#40 (savannah: MC doesn't open if network gateway inaccessible.) (07 Jan 2007)for example. The problem seems to be caused by mc's use of samba. Is there a known solution or circumvention? The above file advises me to "comment out the eth0 interface from the smb.conf "; however, my /etc/samba/smb.conf seems to have no eth0 interface.The "man mc" file mentions that "smbfs" is one of the virtual file systems used internally by mc. I tried reducing the "vfs" timeout in the ".mc/ini" file from 60 to 5, but this had no effect on the startup time.
View 5 Replies
ADVERTISEMENT
Aug 6, 2010
I have freshly installed OpenSUSE 11.3 64 bit and reimported my old openvpn connections via Network Manager. Connection can be established fine, but after 3 to 6 seconds (pings) it will stop to receive any packets on the tun device.
I tried disabling the firewall, starting openvpn manually, no avail. I checked the message log and the openvpn output, no messages recorded.
View 1 Replies
View Related
May 27, 2011
I have a couple of nfs shares which I configured through the yast NFS client module. It entered these in my fstab file to start on bootup. A sample entry is:
10.2.1.30:/home/opt/Cindy/homenfsdefaults 0 0
As long as the foreign computer is online all is well. If the foreign computer is taken off line, soon after KDE applications such as Dolphin and the panel freeze, even if I am not using the shares. When the foreign computer comes online again, everything unfreezes on my computer and works fine. Likewise, if the other computer is not online when I boot, there is a long delay while the system waits for the share to come up. Is there something in my configuration that I can change to stop either or both of these problems? I am running 11.4 x86_64 on a wired network with static ip addresses.
View 9 Replies
View Related
Jun 15, 2011
I'm currently running my own postfix server which is the MX for my domain. This is hosted in my house at the moment on the end of an ADSL line with a static IP. However, I'm trying to go totally mobile so I can kill the ADSL and the line rental and switch to 3G. Does anyone know a solution which allows me to accept (or ask for delivery) of SMTP when temporarily connected and queues it externally? Sort of like a hosted mail queue which pumps SMTP onto my laptop only when I ask it to.
View 2 Replies
View Related
Jan 5, 2011
After connecting to any host, the openssh client hangs after I type the password. The strange part is, it only hangs if when I use the wlan card. If I connect my phone to the computer and uses it to connect to my server, it works 100%.
If I use any other computer at the wireless network, it works 100%
If I use putty on the same machine, it works 100%
It is only a problem when I use the build-in wireless card, under openSuSE 11.3, on my Lenovo L512. (note that everything besides ssh works completely).
View 4 Replies
View Related
Jul 20, 2010
I am having an issue that the pop-up for Network Manager hangs and will not go away covering part of my screen. This started after the system locked-up. If I try to edit the pop-up setting in gnome it the dialog box lockup and has to be forced shutdown.I am runnning openSUSE 11.3.
View 4 Replies
View Related
Dec 30, 2009
I have a SMB share being mounted during boot using a /etc/fstab entry.All that seems to work fine, but on shutdown or reboot I found that the system hangs for a variable period trying to unmount the share. It appears from the log that the unmount is happening after the network connections are closed.Is there someway around this, or is there some other way I should be mounting the share so that it is closes successfully at restart or shutdown?
View 1 Replies
View Related
Jan 2, 2011
When accessing an NFS mount for a large (200MB+) file transfer, the transfer starts rapidly, then becomes slower and slower until it hangs. On several occasions, it has frozen the client machine. Both client and server are set to default to nfs version 3. Slowdown and hang also occur when connecting to FreeBSD NFS mounts.
Presumably (I hope), there is some sort of configuration for the client that needs to be set. what should be changed in the configuration? This worked out of the box in OpenSUSE 11.0.
View 9 Replies
View Related
Mar 16, 2011
The module e1000e is loaded into system. At addition VLAN the system hangs at a stop VLAN or configure other devices (sound, video). In OpenSuSe 11.3 it worked correctly.
MB: ASUS P5Q-ME DO / NetCard: Intel 82567LM-3
View 2 Replies
View Related
Mar 31, 2011
I am trying to built a mailserver using Sendmail + cyrus + amavisd + TLS authentication. All programs used are the latest versions shipped with OpenSUSE 11.4 I have set-up successfully sendmail+cyrus and I can send e-mail anywhere without a problem using authentication. But when I try to integrate amavisd-milter mail delivery hangs at 63% and the following message appears in /var/log/mail
[code]....
I have also uninstall all involved programs, deleted all conf files and re-installed them but alas without any success. The same configuration was used at least once with almost all previous SuSE/openSUSE versions since 1998.
View 1 Replies
View Related
Aug 26, 2010
This is probably already on these forums, but I recently re-installed suse 11.3 and had the desktop effects working fine with the desktop cube animation and everything. But not the case this time...I resume compositing, and try my desktop effect shortcuts, but nothing happens and it comes up saying for me to press Alt+Shift+F12 to resume the compositing again. I do that, but still nothing, and I even re-apply the desktopct settings completely and restart the computer and it comes up saying that none of them were activated or something in the notifications pop-up on the bottom right of the screen. I thought I downloaded the right files (OpenGL??) from the repositories along with basically anything I thought would make it work.
View 3 Replies
View Related
Mar 16, 2011
I just installed openSuse 11.4 on my tablet pc HP Pavillion tx 2000 and then I installed Nvidia driver by Yast, adding before the official repository NVidia.Sometimes, it happens that I can move the cursor mouse but when I click nothing happens, while the keyboard works properly. After more some seconds mouse works again.
View 2 Replies
View Related
Jun 9, 2010
Is there any way I can install an older version of kde like the on on suselinux 10.1 because the newer desktops are very unstable on my computers. stuff closes, stuff freezes temperarly, fortunetly nothing perminent has happened yet but its been threating to abolish my computer. Ive had other cases like this end up making me reinstall my operating system and Id really like to just fix the problem before it happens. page down is overrun with this horribly lagging scroll.buttons look like there clicking occasionally and again it closes programs and has logged me out once already.
View 9 Replies
View Related
Dec 5, 2009
I have quite a strange problem with Skype and Opensuse. First problem was that when I used microphone on Audigy 4 (from some reason recognised as Audigy 2) the sound which people received from me was very chirpy. This problem was solved easily, I just turned my on-board sound system on and started using micorphone from integrated card. And here comes my weird problem. Microphone works all right, but only for short period. After some time after I start talking to someone on Skype the microphone turns itself off, but I can still hear my interlocutors. The only solution is to go to Yast and restart sound system or to restart whole computer, both of which are not real solutions, but well, they sort of work. I'm using Opensuse 11.2 x64.
View 3 Replies
View Related
Nov 7, 2010
I have a big problem with my openSUSE 11.2 32bit (but I have experimented the same error with other distributions), this problem consist in a temporarily freeze of my system after some seconds or some minutes if I don't move the mouse or I don't press any key... but when I move the mouse or press any key the system magically wake up and each applications begins to run from the point where was interrupted... this problem also affect on the system clock that loses every second that the system remain frozenMy computer is a notebook with: CPU Intel Core2 Duo T81004GB RAMGPU GeForce 8600M GT
View 2 Replies
View Related
Feb 17, 2010
i got an asdl-modem and a router behind that. before that i just had the asdl-modem and connected with pppoeconf. i start the OS and run apt-get update. all is fine. i open iceweasel and it takes very long till a site is loaded. now and then it can't find the site at all. i rerun apt-get update and it hangs.
[Code]....
View 14 Replies
View Related
Oct 24, 2010
After first installing Fedora on my computer, I was having a problem with my programs hanging for about 10-20 seconds, and then starting working again. After a while I discovered that every time it happened, there where some disk activity, and when the disk activity stopped, the programs started working again. The problem also occurred, when I was copying large files. Then the programs would hang until the copy was finished.After some googling around I tried to change the scheduler for SDA from cfq ro deadline, which seemed to solve the problem.
However the problem still seems to occur, if I do something that requires heavy network activity. If I copy a large file from one computer to another or download something using Vuze, all programs becomes unusable until network activity stops again. have 2 computers, which both seems to have the same problem (AMD X2 3800+ and Intel Core I5 750). They are running Fedora 12 and 13 both 64 bit. Both are using Asus motherboards with onboard LAN
View 6 Replies
View Related
Aug 14, 2011
I have two physical NICs (eth2 & eth3) with eth2 connecting to the home router/dhcp server and eth3 connecting to another machine which needs access to the internet. I'm trying to create a bridge so that the second machine on eth3 can be connected on the lan. I've tried the following, however it hangs when attempting to get an IP address from the router. Likewise, attempting to give it a static route doesn't seem to work either.
$ sudo aptitude install bridge-utils
$ sudo ifconfig eth2 down
$ sudo ifconfig eth3 down
$ sudo brctl addbr br0
$ sudo brctl addif br0 eth2 eth3
$ sudo dhclient br0 # this hangs and fails to get a dhcp address
I've tried to ensure my routing table mimics what it looks like when using eth2 normally, I cannot hit the gateway at all.
$ route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.0.0 0.0.0.0 255.255.255.0 U 2 0 0 br0
0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 br0
I attempted an 'arping' to the MAC address of the router while I had eth2/3 bridged, but it failed to obtain it's IP address as well. One interesting thing I noticed was that attempting to bring down the bridge & reactivate my internet on eth2, I was having trouble pinging the gateway. It turned out 'ipmasq' had been installed and was running causing odd problems. When I stopped the ipmasq service, my internet started working properly again. I removed the 'ipmasq' package entirely and tried bridging the NICs again thinking it may have been causing problems, but it still failed.
View 1 Replies
View Related
Feb 10, 2010
When I browse the web and download files, the wireless network connection now and then seem to take a pause of several seconds before recovering. Is this a know issue? Doesn't seem to affect Piding, only my browser and my apt-get upgrades.
View 1 Replies
View Related
Apr 5, 2011
Using Ubuntu 11 64 bit. I tried to install a netgear driver, it didn't work so I deleted it, now every time I try to run Wireless Network Drivers the program hangs and I can't do anything with it. I have to force quit. I have removed and installed it a few times now to no avail.
View 1 Replies
View Related
Jan 6, 2016
As above, my wheezy 32bit hangs at boot. the last few lines displayed are
Code: Select allMounting local filesystems...done.
Activating swapfile swap...done.
Cleaning up temporary files...
Setting kernel variables ...done.
Setting up resolvconf...done.
Configuring network interfaces...
[Code] ....
I removed the files from /etc/network/interfaces.d/ just in case. i still can't boot up.
Resolved (I think) as on this post: [URL] ....
View 14 Replies
View Related
Jul 6, 2010
I am using centos 5.5 x85_64 2.6.18-194.3.1.el5 The server is hanging at start up due to the follwoing error
udevd[746] nss_ldap reconnecting to LDAP server (sleeping 4 seconds)
udevd[746] failed to bind to LDAP ser er ldap://192.168.0.100 cant contact ldap
It fails and then tries again, and again, each time increasing the sleep time. This is happening before network sercvices are started so ther is no way it can connect to ldap. anyone know a way to fix this problem?
View 2 Replies
View Related
Feb 8, 2010
Is it possible to temporarily enable all repos from within the command line? It would be useful when searching for packages. ie yum enablerepo=* search tint2 (which doesn't work btw!)
View 4 Replies
View Related
May 6, 2010
In order to be able to concentrate, I would like to have an applet (or script) to temporarily disable notifications.In the same spirit of Caffeine which inhibits the screensaver when activated.I saw this tip, but would like something which does not require reboot
View 2 Replies
View Related
Aug 12, 2010
I'm looking to temporarily disable NetworkManager while I configure some things in a shell. It's interfering by auto-reconnecting and using the network interface in the process. I've tried killing the process but that just seems to disconnect the network not kill the NetworkManager applet. I don't want to uninstall, and I don't want to have it disabled on startup. I just want to "close" it or "turn it off" temporarily! How can I do this? Also, I'm using 10.04
View 1 Replies
View Related
Jun 19, 2011
When connecting to my Ubuntu box from my Windows 7 machine via Telnet, the session will sometimes freeze for a few seconds before allowing me to continue typing. This seems to happen every few minutes. Both machines are wireless and I am connecting through my local network.
View 1 Replies
View Related
Jun 14, 2010
i was fiddling with some new commands i learned and typed something weird. Then bash broke on me for a while. here's the command i typed while in /bin bash > lessi believe i was in "sudo su" as the moment. i want to understand this because when I typed it bash didntork. i tried to type "ls" after and it didnt result in anything.but thats not all it didnt receive any commands.Was this a crash? and why/how did it fix itself after i logged off.
View 9 Replies
View Related
Mar 7, 2010
I'm working a program to implement a simple multi-process browser. The browser works by having a ROUTER process as the parent of everything else in the program. There's another process called the CONTROLLER which is part of where the user can input information. To tell the ROUTER to make a new tab in the browser the user activates a function from the CONTROLLER to send the create new tab information to the ROUTER:
Code:
void new_tab_created_cb(GtkButton *button, gpointer data)
{
[code]...
View 1 Replies
View Related
Feb 15, 2011
I am trying to install Ubuntu 10.10 x64 on a HP Pavilion p6565uk.
My PC is x64 compatible, although ubuntu will not install.
I don't get to any gui, it says ubuntu will continue install in 5 seconds, at 0, nothing happens. The CPU light is flashing, but nothing happens.
After about 10 minutes, it reboots, but when the HP splash screen shows (Before the boot selection screen) it just hangs. I have to do a hard shutdown to boot back up.
I am using wubi for install.
View 1 Replies
View Related
Mar 2, 2010
I installed OpenSUSE 11.2 and manipultes Window Behavior from Personal Settings so I can't access to my account while login. I use kde. Now I can access the system from the root login. How can I restablish the kde default settings on my account from the root account?
View 6 Replies
View Related
