Debian Configuration :: Squid3 Not Working After Update Or Reinstall
Aug 3, 2010
I run a Squid 3 server that is acting as a web filter. It worked fine on Etch. The system stopped working properly due to two of the three SATA cables being bad. Before I figured that out, I tried doing updates. Since Etch updates were no longer available, I did a distupgrade to Lenny. Immediately, Squid stopped working properly. It would take up to two and a half minutes for it to respond to a web request and add it to the access.log. This was using the same configuration file that it was using before the update.
After I found the hardware problem, I did a clean install of Lenny. I used the basic squid.conf like I did on the previous system, only changing it to add my ACLs and because it wasn't saving an access.log to the default location unless I uncommented the path directive. Now, it won't respond to a request at all. Forwarding is enabled and the firewall seems to be set up correctly.
View 1 Replies
ADVERTISEMENT
Mar 17, 2011
i have successfully set up squid3 with squeeze using guide on this forum viewtopic.php?f=16&t=59301 . The only problem that i have is the size of /var/log/access.log is too big and keep increasing so i run out of free space. The size of it always the same size as my free space hard disk (so it make me run out of free space in just one day, it can have size to 30 Gb ) right now , the only workaround i make is using crontab to rm access.log every hour . I'm sure this is not the right solution . Does anybody know the correct workaround about this ? I have searching in google but seems havent yet have luck with this .
View 5 Replies
View Related
Mar 20, 2011
About an hour ago i did an update on my Debian Squeeze. After the update was completed my LAN connection stopped working.. now i have to connect my computer to my router with a usb cable instead with my ethernet cable.. also, on the network connection, on the wired network section it says that the device(ethernet) has not been managed..
View 1 Replies
View Related
Jun 1, 2011
after a long time I did a little upgrading of the packages...
bind9-host:amd64 (9.7.3.dfsg-1~squeeze1, 9.7.3.dfsg-1~squeeze2), linux-image-2.6.32-5-d64 (2.6.32-31.6.32-34squeeze1), dnsutils:amd64 (9.7.3.dfsg-1~squeeze1, 9.7.3.dfsg-1~squeeze2), linux-headers-2.6.32-5-common:amd64 (2.6.32-31, 2.6.32-34squeeze1),
[code]...
View 2 Replies
View Related
Jun 30, 2010
So I just installed Debian Lenny on my PC (the install went fine). After installing, I went into aptitude and noticed that most of the packages available in the repository are out of date (python 2.5, GCC 4.3). System Update tells me that I am up to date, and when I tell synaptic/aptitude to mark all updatable packages, it does nothing. I have tried typing apt-get update as root aswell. Nothing worked.
I installed Debian with the first DVD from [URL]. During the installation, I told it to download anything that wasn't on the DVD. Shortly after installing, I had manually edited my /etc/apt/sources.list and commented out the CD line. Could any of this have messed up APT?
View 5 Replies
View Related
Dec 16, 2010
I've just upgraded my kernel to 2.6.32 and I cant use sound anymore!!! My card was detected ,here is the output of lspci |grep Audio
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
also frimware is installed ,gstreamer as well the sound is not on mute and it was working on the previous kernel .
View 2 Replies
View Related
Feb 9, 2010
I've been enjoying wireless for a long time on Squeeze (iwl3945) with KDE, but the recent network manager update stopped that. I've tried a few things, like going back to /etc/network/interfaces and ifup wlan0 that I use with Lenny, but still not working.
View 14 Replies
View Related
Apr 20, 2010
I managed to break my video4linux module rendering all my video devices useless, can anyone tell me how to reinstall it as per the the one on Lenny. I'm looking for the original one and not v4l2.
2.6.26-2-686 I have a presentation to do tonight and need it working for that.
View 3 Replies
View Related
Apr 23, 2010
I'm running lenny 2.6.26-2-686 and have accidently lost some of my kernel modules is it possible (and painless) to reinstall this kernel? if I do what data will I loose? will it effect my raid1 setup?
View 4 Replies
View Related
Feb 27, 2011
I'm new here, I hope someone can help me get wireless working on my laptop. This is a Toshiba Satellite Pro C650-EZ1533 (Intel Core i3). The Toshiba site says it has "Atheros Wireless networking (802.11b/g/n)", but does not identify the hardware more specifically.
I installed Debian 6.0 from a netinstall disc, the version including nonfree hardware drivers. In the software selection I went with the defaults: only "Desktop environment", "Laptop" and "Basic system".
Now the GUI looks nice and behaves OK, and the audio, video, ethernet, and optical drive are working. However, I don't know how to configure wireless. It's probably my fault. I was installing and uninstalling file managers, trying to find one I would like better than Nautilus. When I went to uninstall one of them, a message in the package manager recommended using a command like "auto remove" or similar (I did not record it exactly). My understanding at the time was that this would only remove things that were installed because of dependencies but were no longer needed. However, *a lot* of things disappeard from the menus.
Now the only thing about networking in the menus is something about setting up a proxy. There should be some sort of network manager, right? Or an icon on the taskbar, maybe? But I don't know what package to install.
View 3 Replies
View Related
Oct 23, 2010
I can't run the update-manager.When I run the Update Manager, it starts to check and then gets"A fatal error has been detected in the update-manager. Do you want to submit a bug report? Selecting No will close the application."What should I do now? Should I reinstall the update-manager? How do I do that?
View 3 Replies
View Related
Jul 10, 2015
I use Debian Stretch and I've installed it twice with the same ISO on the same laptop. First just to test a few things, then freshly installed it again.
The first time the wireless card was named wlan0 (as always for me, I've never had another name), the second time though it was suddenly named wlp3s0.
How did this occur and may I change it back to wlan0?
View 7 Replies
View Related
Nov 6, 2015
I use Jessie, with the Aptitude curses interface for package management. It seems that every time I successfully uninstall/purge a package (along with its dependencies), then the next time I try to install/uninstall anything else it wants to reinstall that package (and its dependencies). It takes several (I haven't counted) "don't install" instructions from me before it will forget about it.
View 3 Replies
View Related
Jun 29, 2010
I recently reinstalled Lenny and I am attempting to save my /home directory. I used the graphical install and when it came to the part about partitioning, I created a new /home partition "hdb1" and told the installer to ignore my old /home partition "/dev/hda9".Following the completion of the install, I logged in and changed my /etc/fstab so that /home --> my old /home partition "/dev/hda9". I then mounted the old partition to /home and rebooted the system. Now, when I go to my /home directory >> properties, I can see that the files I had are on the drive (2GB are used) --- but --- I cannot actually see the files??
View 1 Replies
View Related
May 2, 2010
So I was messing around trying to uninstall Nibbles and reinstall since I have an issue starting that game and something happened and removed the submenu under Games called "Logic", which had another whole list of games.
Is it possible to reinstall the games package or reinstall the update?I'm thinking more of the lines of a system restore or something so back 2 days from today.
View 2 Replies
View Related
Mar 27, 2016
I'm attempting to install some software on my friend's computer. It keeps saying the packages I want aren't there but I know they are. I've been fooling around with this for a while. I may have broken something in the process. Repository names, perhaps?Is there some way to reinstall Synaptic/Aptitude and "wipe the slate clean?"
View 6 Replies
View Related
Oct 21, 2010
I installed SQUID3 on a Linux machine with two ethernet interfaces (eth0 and eth1). I used the default settings in the squid.conf file and uncommented the two lines
Code:
And
Code:
eth0 is connected to a router, which provides Internet access. It is assigned an IP 192.168.1.2 by the router. I manually configured eth1 to have an IP address 192.168.5.1. It is connected to a switch. Systems having IP addresses 192.168.5.x are connected to this switch. I ran these two commands for NAT:
Code:
Code:
But when I try to access internet from a system having IP 192.168.5.2 through the proxy I get an error that says "Access denied". What is wrong with my configuration?
View 1 Replies
View Related
Jul 12, 2014
I just did a Wheezy reinstall (I just started using LVM on LUKS), but my Ralink RT5370 usb wireless adapter wouldn't work, even though I have firmware-ralink installed. When I click on the Network Manager icon, it lists my home network (WPA2 passphrase) as available, but clicking on it yields no result.
Before the system reinstall, I've been using the adapter with firmware-ralink without problems. As far as "apt-get update && apt-get upgrade" goes, my system is up-to-date.
I tried uninstalling and then reinstalling firmware-ralink (rebooted too), but to no avail. The adapter seems to be undamaged.
Here are a few pieces of info that might be useful:
Code: Select all$ uname -a
Linux watershed 3.2.0-4-amd64 #1 SMP Debian 3.2.60-1+deb7u1 x86_64 GNU/Linux
Code: Select all# lsusb
...
Bus 004 Device 007: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter
[Code] ....
View 0 Replies
View Related
Apr 14, 2011
How to compile squid3 on debian ?
View 1 Replies
View Related
Oct 3, 2010
I was trying to get the Windows one working again. Here's what fdisk -l reads:
[Code]...
I'll change these or do some grub configurations, if anyone knows what ones can work.
View 1 Replies
View Related
Aug 25, 2010
I did an upgrade a while back to lenny, but still get these errors..
Here's what I get when O do apt-get update:
View 14 Replies
View Related
Apr 13, 2011
i have download debian 6.0.1 DVD, and installed corectly,i am using internet behind proxy, but i configure all the things thier and i still can ping to google from CLI bt i could nt update my system
View 2 Replies
View Related
Jul 10, 2011
My probles consists in that i have no idea on how update the clamav. I downloaded it throu center of software. Butt when i try to upgrade it from the gui the upgrading bar reaches only 15% and desapears. I tried do type freshclam from root command line but it just writes that there is not such command. May be i use incorrectly the command line.
View 4 Replies
View Related
Sep 9, 2015
From the securing-debian-howto [URL] ...
"4.2.2 Security update of the kernel
First, make sure your kernel is being managed through the packaging system."
which suggests...
Code: Select all$ dpkg -S ‘readlink -f /vmlinuz‘
When I try to confirm by running the above, I get a lot of characters of output but the last line reads...
Code: Select alldpkg-query: no path found matching pattern /vmlinuz‘
How do I make sure my kernel is being managed through a packaging system?
View 4 Replies
View Related
Oct 22, 2015
I have Jessie in a VM. For some days I have been consistently getting errors with apt-get update, no matter if I use httpredir of ftp.us. These are the errors:
Code:
Select allErr http://ftp.us.debian.org jessie/updates/main amd64 Packages
404 Not Found [IP: 64.50.236.52 80]
Err http://ftp.us.debian.org jessie/updates/contrib amd64 Packages
404 Not Found [IP: 64.50.236.52 80]
Err http://ftp.us.debian.org jessie/updates/non-free amd64 Packages
[Code] ....
E: Some index files failed to download. They have been ignored, or old ones used instead.
And this is the syntax in my /etc/apt/sources.list
Code:
Select alldeb http://ftp.us.debian.org/debian/ jessie main non-free contrib
# deb-src http://ftp.us.debian.org/debian/ jessie main non-free contrib
deb http://ftp.us.debian.org/ jessie/updates main contrib non-free
# deb-src http://ftp.us.debian.org/ jessie/updates main contrib non-free
# wheezy-updates, previously known as 'volatile'
deb http://ftp.us.debian.org/debian/ jessie-updates main contrib non-free
# deb-src http://ftp.us.debian.org/debian/ jessie-updates main contrib non-free
# Jessie Backports
deb http://http.debian.net/debian jessie-backports main contrib non-free
Mirrors cannot be down for so long, so what is going on?
View 7 Replies
View Related
May 3, 2016
Is it mandatory to reboot a public server after upgrading openssl? Or is it sufficient to restart the services?
View 2 Replies
View Related
Nov 1, 2010
I've just installed debian sid and see that I've the kernel 2.6.32. I was a bit surprise as on ubuntu I had the 2.6.35 and debian sid is supposed to be more up to date that ubuntu (maybe I'm wrong).So I checked what were the packages available :
mart@mart-laptop:~$ uname -a
Linux mart-laptop 2.6.32-5-686-bigmem #1 SMP Sat Oct 30 23:25:58 UTC 2010 i686 GNU/Linux
mart@mart-laptop:~$ sudo aptitude search ^linux-image
[code]...
View 2 Replies
View Related
Nov 18, 2010
I have a PC that have a new Ethernet card that is not yet supported by Debian/Lenny.I downloaded the latests driver from the manufacturer and after a make;make install everything works like a charm.My problem is that one day after a probable update, Debian overrided my new driver by an other one causing my Ethernet card to shut down.After an other make install, everything work again like it should..But how do i do to prevent Debian to update my driver ?
View 1 Replies
View Related
Dec 9, 2010
I have squeeze using the default setup with 5 seperate partitions on hard drive. All other updates are fine but it will not install the Linux-Image-2.6.32-5-amd64. I get message that not enough room. I think this is the kernal update. I use update manager. Is there a fix for this short of resizing the partition. This is a one computer/user setup. I had this problem on a previous install of stable and ignored it thinking that it was a glitch. That install was an experimental setup and I liked it but it didn't work on the internet very well so went to testing.
View 5 Replies
View Related
Dec 14, 2010
This morning's update
root@squeeze:/home/me# aptitude update
[Code].....
View 2 Replies
View Related
