I've just upgraded my kernel to 2.6.32 and I cant use sound anymore!!! My card was detected ,here is the output of lspci |grep Audio
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
also frimware is installed ,gstreamer as well the sound is not on mute and it was working on the previous kernel .
I am using DEBIAN 6.0 and I wannna update my kernel from 2.6.32 to 2.6.38. Every time, I do it but after the installation & rebooting into the new kernel it gives me error "UNABLE TO BOOT INTO THE KERNEL".
View 1 Replies View RelatedI use Debian Stretch (testing). After upgrading to kernel 4.4 the system doesn't see my main soundcard at all -- so, no sound. And now I also get this message every boot:
Code: Select allmodprobe: module microcode not found in modules.dep
From the securing-debian-howto [URL] ...
"4.2.2 Security update of the kernel
First, make sure your kernel is being managed through the packaging system."
which suggests...
Code: Select all$ dpkg -S ‘readlink -f /vmlinuz‘
When I try to confirm by running the above, I get a lot of characters of output but the last line reads...
Code: Select alldpkg-query: no path found matching pattern /vmlinuz‘
How do I make sure my kernel is being managed through a packaging system?
I've just installed debian sid and see that I've the kernel 2.6.32. I was a bit surprise as on ubuntu I had the 2.6.35 and debian sid is supposed to be more up to date that ubuntu (maybe I'm wrong).So I checked what were the packages available :
mart@mart-laptop:~$ uname -a
Linux mart-laptop 2.6.32-5-686-bigmem #1 SMP Sat Oct 30 23:25:58 UTC 2010 i686 GNU/Linux
mart@mart-laptop:~$ sudo aptitude search ^linux-image
[code]...
A few days ago on my rss reader, I have read article about Ksplice uptrack that check updates for kernel and update kernel without reboot!
View 1 Replies View RelatedSqueeze's latest update has upgraded my kernel from 2.6.32-3-686 to 2.6.32-5-686.My wireless stopped working and then I realised that I had to rebuild the wifi modules. I had followed this earlier.URL...For this new kernel, which I step of the process should I repeat? Rebuild module? Or just do a modprobe?
View 4 Replies View RelatedI'm using Squeeze amd64, installed latest kernel 2.6.38 from backport yesterday. Just now try to check for any update but failed, these messages show.
View 2 Replies View Relatedapt-get suggetsed I should remove some packages I was no longer using. I've read the threads that explain this, but unfortunately I did that just now, not when I actually ran the damn command. I must say, however, that there were lots of things I wasn't actually using, so it was useful in a way. But there is a problem:
I have a Dell Inspiron 1525 and to get my sound keys working (the mute, volume up and volume down keys) I had to go to Settings-->Regional & Accessibility-->Keyboard Layout and there in Keyboard model I chose the option Dell Laptop/Notebook Inspiron 6xxx/8xxx. I know that's not exactly my model, but that made my sound keys work fine. Well, since I did the autoremove thing, that stopped working. I haven't got a clue what library was being used to get the sound keys working.
About an hour ago i did an update on my Debian Squeeze. After the update was completed my LAN connection stopped working.. now i have to connect my computer to my router with a usb cable instead with my ethernet cable.. also, on the network connection, on the wired network section it says that the device(ethernet) has not been managed..
View 1 Replies View Relatedafter a long time I did a little upgrading of the packages...
bind9-host:amd64 (9.7.3.dfsg-1~squeeze1, 9.7.3.dfsg-1~squeeze2), linux-image-2.6.32-5-d64 (2.6.32-31.6.32-34squeeze1), dnsutils:amd64 (9.7.3.dfsg-1~squeeze1, 9.7.3.dfsg-1~squeeze2), linux-headers-2.6.32-5-common:amd64 (2.6.32-31, 2.6.32-34squeeze1),
[code]...
I do not know if this is really something I should worry about. I am running Debian testing on my laptop (HP Pavillon dv6). Today, the aptitude update---aptitude upgrade gave me a new kernel (2.6.39). However, if I boot with that kernel, I get a warning (do not know if that is the way I should call this) telling me that the machine failed to get the i915 symbols so turbo graphics will be disabled.I have not done any serious test, but at first sight I do not notice any difference performance-wise with respect to the previous kernel. what am I supposed to do to fix this?
View 8 Replies View RelatedFor quite a long time now, I haven't even needed to re-install video drivers most of the time. However, ever since version 2.6.36-0.dmz.4, they haven't been. I booted my system after installing that kernel, re-installed the video drivers, and when that didn't work, completely removed them and re-installed them, and it still didn't work. Well, I was told that the installation was successful but even after restarting it appeared that they weren't working. I installed 2.6.36-0.dmz.5 today and the same problem persists. I tried an older kernel version (2.6.36-4 something) and they worked fine.
View 2 Replies View RelatedTesting distribution. Installed Linux 3.0 but left 2.6.32 on as backup. When I boot into the old kernel, wireless mostly works OK, but never when I boot with the new kernel.
Results of dmesg|grep wlan0 on 2.6:
[ 22.005102] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 28.196774] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 28.644779] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 30.688053] wlan0: direct probe to AP 00:19:5b:06:9f:ba (try 1)
[ 30.694053] wlan0: direct probe responded
[Code]...
Noticing the Access Point looked like it needed the MAC address, I ran iwconfig wlan0 ap <MACADDRESS> and sometimes it will work, and wicd can connect to the access point. But sometimes the command fails to run.
So I just installed Debian Lenny on my PC (the install went fine). After installing, I went into aptitude and noticed that most of the packages available in the repository are out of date (python 2.5, GCC 4.3). System Update tells me that I am up to date, and when I tell synaptic/aptitude to mark all updatable packages, it does nothing. I have tried typing apt-get update as root aswell. Nothing worked.
I installed Debian with the first DVD from [URL]. During the installation, I told it to download anything that wasn't on the DVD. Shortly after installing, I had manually edited my /etc/apt/sources.list and commented out the CD line. Could any of this have messed up APT?
I run a Squid 3 server that is acting as a web filter. It worked fine on Etch. The system stopped working properly due to two of the three SATA cables being bad. Before I figured that out, I tried doing updates. Since Etch updates were no longer available, I did a distupgrade to Lenny. Immediately, Squid stopped working properly. It would take up to two and a half minutes for it to respond to a web request and add it to the access.log. This was using the same configuration file that it was using before the update.
After I found the hardware problem, I did a clean install of Lenny. I used the basic squid.conf like I did on the previous system, only changing it to add my ACLs and because it wasn't saving an access.log to the default location unless I uncommented the path directive. Now, it won't respond to a request at all. Forwarding is enabled and the firewall seems to be set up correctly.
I've been enjoying wireless for a long time on Squeeze (iwl3945) with KDE, but the recent network manager update stopped that. I've tried a few things, like going back to /etc/network/interfaces and ifup wlan0 that I use with Lenny, but still not working.
View 14 Replies View RelatedI have some issues concerning so called "11-minutes-mode" - RTC update"11-minutes-mode" definition In hwclock man page we can read:"Automatic Hardware Clock Synchronization By the KernelYou should be aware of another way that the Hardware Clock is kept synchronized in some systems. The Linux kernel has a mode wherein it copies the System Time to the Hardware Clock every 11 minutes. This is a good mode to use when you are using something sophisticated like ntp to keep your System Time synchronized. (ntp is a way to keep your System Time synchronized either to a time server somewhere on the network or to a radio clock hooked up to your system. See RFC 1305).
This mode (we'll call it "11 minute mode") is off until something turns it on. The ntp daemon xntpd is one thing that turns it on. You can turn it off by running anything, including hwclock --hctosys, that sets the System Time the old fashioned way. To see if it is on or off, use the command adjtimex --print and look at the value of "status". If the "64" bit of this number (expressed in binary) equal to 0, 11 minute mode is on. Otherwise, it is off. If your system runs with 11 minute mode on, don't use hwclock --adjust or hwclock --hctosys. You'll just make a mess. It is acceptable to use a hwclock --hctosys at startup time to get a reasonable System Time until your system is able to set the System Time from the external source and start 11 minute mode. Here are my questions:1 . How to check if "11-minutes-mode" is on/off ?The output of adjtimex -p looks like this:
mode: 0
offset: 17504
frequency: 6140386
[code]...
I recently installed debian squeeze 32bit on a second partition of my amd athlon 64 X2 dual core machine.Currently it is using linux-image-2.6.32-trunk-686 kernel.But linux-image-2.6.32-trunk-amd64 is available.on the repository.Is it a 64bit kernel or 32bit kernel optimized for amd64 architecture?
View 12 Replies View RelatedI have a problem with my custom kernel when I want to create the Nvidia kernel module.After this finished I installed the image and headers and created the Nvidia kernel module. Everything worked fine.However, if I remove the linux-source from my home directory then I can't create the kernel module.Even though I have the headers for the kernel installed.
View 2 Replies View RelatedThe audio stopped working since I upgraded my kernel from 2.6.35.6-45 to 2.6.36.6-48.
Is reinstalling alsa / pulse the only option ?
Well, the gdm issue was pretty easy to solve. Just reinstalled NVIDIA video drivers in runlevel 3.
But sound seems to be a litle more dificult. Before I spend some hours, I would like to ask if some had the same problem.
By the way, here is my alsa-info.sh url.
I have a set of vm's with stable, testing, and sid to keep track of how things are going. When I did an apt-get dist-upgrade with squeeze last week, things seemed to OK (350 package updates) until the end. It didn't seem to like and / or was confused by a kernel dependency.
I am not too concerned yet. Because these are in vm's, I do a snapshot before any significant change. I can futz around with impunity because I have that backup.
I re-booted, and tried the apt-get dist-upgrade again with same results. I think I also tried apt-get -f install.
So I reverted to the snapshot, and will simply try again in the future. I recall that with lenny as testing, the font-desktop was really screwed up for about a period of 6 weeks.
However, just in case someone else runs into this:
1) a re-boot worked, but the failure of apt-get made me nervous enough to revert.
2) waiting for corrections has seemed to work in the past (with a single exception with a 4-disk SCSI software RAID10 update that failed to re-boot lenny successfully after what seemed to be a minor update -- that was on a real system, not a vm. I haven't gotten back to look at that.)
there is no sound in Fedora14 after kernel update (kernel-2.6.35.11-83.fc14). when use kernel-2.6.35.10-74.fc14 , I can listen to music.
View 14 Replies View RelatedToday, I installed the recent kernel security update (i.e. 2.6.32-24-generic #41-Ubuntu SMP). After a reboot, the sound is gone.
From my user account:
mpc@awd:~$ alsamixer
cannot open mixer: No such file or directory
Same problem with "aumix".
However, the commands "sudo alsamixer" and "sudo aumix" seem to work (but still no sound).
"lsmod | grep snd" will give
snd_hda_codec_atihdmi 2367 1
snd_hda_codec_realtek 203310 1
snd_hda_intel 21941 0
[Code]....
I am experiencing sound problems after an upgrade to kernel 2.6.29.6-213.fc11.i686.PAE from kernel 2.6.29.5-191.fc11.i686.PAE in several games like Neverwinter Nights (linux binaries) and Warcraft III (PlayOnLinux). The sound stops and changes into a very choppy annoying sound. When I boot into the old kernel the problems are gone.
View 14 Replies View RelatedI just updated my kernel from 2.6.32-21 to 2.6.32-22 today. Now I am getting no sound. I have checked my mixer levels with both kmix and alsamixer. Nothing appears to be amiss. I tried rebooting with the old kernel and still no sound.
View 2 Replies View RelatedI have a Hardy which last night asked for updates that included kernel changes. Today I find I no longer can connect using WIFI and have no sound. The GUIs are just not there and it's as if the controllers themselves have disappeared. For example lshw -C network reveals a Cisco Airon Wireless, but it's not listed as a wireless device, just as network controller.Can anyone advice me on how to approach this? Is it possible to revert changes or something?
View 5 Replies View RelatedThe latest Kernel update (2.6.35-25-generic) killed all my sound output on my Toshiba Satellite M115.
I tried reinstalling all ALSA components and plugins. No luck there.
Rebooting into 2.6.35-24-generic fixes the problem, in that my sound works again.
After I upgraded from kernel 2.6.32-31 to 2.6.32-32 and then 2.6.32-33, my sound started to lag(the lag occurred on 2.6.32-32 and stayed to 2.6.32-33, but it worked perfectly ever before). Sound does work in itself, but frequently lags and pieces that were already played before will be played again, pretty much like an old vinyl that occasionally jumps or hangs. When I start to replay something, it does not put out anything for a second or two and then starts, when I stop it will keep playing for the exact same amount of time. So, sound is synced to videos(video replay works perfectly well and without the lag). Problem is definitely related to the sound drivers, not to replay software or any buggy file. It occurs with DVDs, Flash Videos in Firefox, music in gmusicbrowser, movie files with VLC, whatever you want. I never experienced such problems with any kernel before. Although I've seen many others posting similar problems, I cannot see any valid solution for myself.
I'm running Ubuntu 10.04 and I sure don't want to go to 10.10 for the second.
I reinstalled Alsa and Pulse, no joy. My sound card is recognized correctly by alsa and can be found in aplay -l. It's a generic onboard surround sound device, although I only use stereo channels.