Debian Configuration :: Apt-get Update Errors
Aug 25, 2010I did an upgrade a while back to lenny, but still get these errors..
Here's what I get when O do apt-get update:
ADVERTISEMENT
Debian Configuration :: Consistently Getting Errors With Apt-get Update
Oct 22, 2015I have Jessie in a VM. For some days I have been consistently getting errors with apt-get update, no matter if I use httpredir of ftp.us. These are the errors:
Code:
Select allErr http://ftp.us.debian.org jessie/updates/main amd64 Packages
404 Not Found [IP: 64.50.236.52 80]
Err http://ftp.us.debian.org jessie/updates/contrib amd64 Packages
404 Not Found [IP: 64.50.236.52 80]
Err http://ftp.us.debian.org jessie/updates/non-free amd64 Packages
[Code] ....
E: Some index files failed to download. They have been ignored, or old ones used instead.
And this is the syntax in my /etc/apt/sources.list
Code:
Select alldeb http://ftp.us.debian.org/debian/ jessie main non-free contrib
# deb-src http://ftp.us.debian.org/debian/ jessie main non-free contrib
deb http://ftp.us.debian.org/ jessie/updates main contrib non-free
# deb-src http://ftp.us.debian.org/ jessie/updates main contrib non-free
# wheezy-updates, previously known as 'volatile'
deb http://ftp.us.debian.org/debian/ jessie-updates main contrib non-free
# deb-src http://ftp.us.debian.org/debian/ jessie-updates main contrib non-free
# Jessie Backports
deb http://http.debian.net/debian jessie-backports main contrib non-free
Mirrors cannot be down for so long, so what is going on?
Debian Configuration :: Apt Update Errors On Locally Mounted Repos
Nov 27, 2015My primary repos are DVD .isos on my hard drive loop-mounted in /etc/fstab. Although I can install packages just fine and there are no issues with running installed applications, I must have screwed up the configuration of /etc/apt/sources.list because I get this output when I do apt-get update:
Code: Select allIgn file: jessie InRelease
Ign file: jessie InRelease
Ign file: jessie InRelease
Ign file: jessie InRelease
Ign file: jessie InRelease
[Code] .....
Here is my rather primitive but functional /etc/apt/sources.list:
Code: Select all# deb cdrom:[Debian GNU/Linux 8.2.0 _Jessie_ - Official amd64 DVD Binary-1 20150906-11:13]/ jessie contrib main
# deb cdrom:[Debian GNU/Linux 8.2.0 _Jessie_ - Official amd64 DVD Binary-1 20150906-11:13]/ jessie contrib main
deb file:/dvd1 jessie main contrib
deb file:/dvd2 jessie main contrib
deb file:/dvd3 jessie main contrib
[Code] ....
So what exactly have I screwed up?
Debian Configuration :: Cannot Dist-upgrade Errors Block Update
Mar 29, 2016This is a redirect of the output of command apt-get update to a text file in /home/user
Code: Select allIgn:1 http://dl.google.com/linux/talkplugin/deb stable InRelease
Hit:2 http://ftp.us.debian.org/debian testing InRelease
Hit:3 http://dl.google.com/linux/talkplugin/deb stable Release
Ign:4 http://linux.dropbox.com/debian sid InRelease
Hit:5 http://deb.opera.com/opera sid InRelease
[Code] ...
They all refer to repos that cannot validate authenticity.
Debian Configuration :: Apt-get Errors ?
Feb 14, 2011compName:/home/usrName# apt-get update
I don't have this problem when I take this laptop to work and connect to the network there, so I thought it must be a problem with the way my modem/router is configured. But when I turn off the firewall, the problem persists. Actually, I'm not very knowledgeable about networking issues, so I'm not sure I'm turning off the firewall correctly, but in the config web page for my router, I go to firewall settings, pick the computer by name, and choose an option that says "Allow all applications (DMZplus mode)". I've also rebooted the laptop since changing this option and tried again with the same results.
Debian Configuration :: Getting Lots Of Errors When Trying To Set Static IP
Aug 14, 2015I am trying to set a static IP for my wireless adapter (wlan0). I've been getting the error
Code: Select all[....] Reconfiguring network interfaces.... Error for wireless request "Set Encode
" (8B2A) :
SET failed on device wlan0 ; Invalid argument.
RTNETLINK answers: File exists
Failed to bring up wlan0.
Done.
After using the command
Code: Select allsudo /etc/init.d/networking restart
Here is what etc/network/interfaces looks like
Code: Select allauto lo
Iface lo inet loopback
auto eth0
Allow-hotplug eth0
Iface eth0 inet manual
Auto wlan0
Iface wlan0 inet static
Wireless-essid xxxx
Wireless-key xxxx
Address 192.168.3.116
Netmask 255.255.255.255
Gateway 192.168.3.0
Debian Configuration :: Errors During Recent Apt-get Dist-upgrade
Feb 15, 2016This is on my AMD64 Testing box...A couple days ago during an apt-get dist-upgrade, near the end I saw the errors below.
I haven't noticed anything broken, yet. I usually only see dkms errors when VBox squawks after an update and I run /etc/init.d vboxdrv setup.
The section of the results containing the errors to the end of the output:
Code: Select allSetting up linux-image-4.3.0-1-amd64 (4.3.5-1) ...
/etc/kernel/postinst.d/dkms:
error: db5 error(-30969) from dbenv->open: BDB0091 DB_VERSION_MISMATCH: Database environment version mismatch
error: cannot open Packages index using db5 - (-30969)
error: cannot open Packages database in /root/.rpmdb
error: db5 error(-30969) from dbenv->open: BDB0091 DB_VERSION_MISMATCH: Database environment version mismatch
[Code] ....
Debian Configuration :: Getting Errors While Updating Sources.list
Jan 27, 2011I am trying to add usermin source from here: [URL]
If you like to install and update Usermin via APT, edit the /etc/apt/sources.list file on your system and add the line : deb [URL]
Software :: Debian--libx11-dev Installation And Configuration Errors
May 9, 2011what the hell the error message shown below and in the attachment means? Apt-get, Aptitude, dpkg and member limiter's 3/21 post all give the same outcome. Do I need to simply remove the offending .deb file from /var/cache/apt/archives? Do I need to install squeeze from scratch? (I'm installing over a tempermental lenny-sid hybrid installation.) This thing is blocking installation and configuration of 28 other packages.
Code: dpkg: error processing /var/cache/apt/archives/libx11-dev_2%3a1.3.3-4_i386.deb (--unpack): short read on buffer copy for backend dpkg-deb during `./usr/share/doc/libx11-dev/libX11.txt.gz'
Debian Configuration :: AMD64 - Wrong Architecture Errors Messages
Jun 22, 2011Installed 6.01a from DVD 1 on a system with 4GB ram. Installer installed amd64 version by default. When I try to install amd64.deb files I get "wrong architecture" error messages from the package manager.
root@Laptop-RalphDeb:/home/ralphq# uname -r
2.6.32-5-amd64
root@Laptop-RalphDeb:/home/ralphq# uname -p
unknown
Why I can install amd64 programs and why I get unknown for the uname -p command?
Debian Configuration :: Stuck In Aptitude Limbo - Errors During Updates
Sep 1, 2011It's trying to fix/complete failed installs but keeps encountering the same errors (error message below). I'm running basically Testing, but there are a few Stable and SID packages due to issues with the blasted nVidia legacy drivers. I've swapped out the video board with an ATI board so that is sorted, but now I can't do any updates. Hoping there is some way to manually override apt's determination to try to fix all broken packages whenever I do anything (install, remove, update, etc). A Google search of this error message didn't turn up anything recent. Any thoughts are welcome.
[Code].....
Debian Installation :: 64bit Stable / Jessie Still Shows Chrome Update Errors?
Mar 12, 2016I am having this problem on my old 64-bit Debian box (stable's Jessie) box, but nothing seems to fix it from what I saw online like in [URL] ... and other forums. Maybe I missed something?
Code: Select all$ sudo apt-get update
Ign http://dl.google.com stable InRelease
Hit http://dl.google.com stable Release.gpg
Ign http://ftp.us.debian.org jessie InRelease
Hit http://security.debian.org jessie/updates InRelease
[Code] ....
Debian Configuration :: USB Errors "usb 1-5: Device Descriptor Read/64, Error -110"
Sep 3, 2010While I had the case open to swap out a network card I thought I would drop in an old USB card (previously used with no problems on a machine running Debian) however on boot I'm now getting some errors showing up. The card has been sitting around for a while so it could be an issue with the card.
[Code]....
Debian Configuration :: Apt-get Update Do Not Work?
Apr 13, 2011i have download debian 6.0.1 DVD, and installed corectly,i am using internet behind proxy, but i configure all the things thier and i still can ping to google from CLI bt i could nt update my system
View 2 Replies View RelatedDebian Configuration :: How To Update The Clamav
Jul 10, 2011My probles consists in that i have no idea on how update the clamav. I downloaded it throu center of software. Butt when i try to upgrade it from the gui the upgrading bar reaches only 15% and desapears. I tried do type freshclam from root command line but it just writes that there is not such command. May be i use incorrectly the command line.
View 4 Replies View RelatedDebian Configuration :: 4.2.2 Security Update Of Kernel
Sep 9, 2015From the securing-debian-howto [URL] ...
"4.2.2 Security update of the kernel
First, make sure your kernel is being managed through the packaging system."
which suggests...
Code: Select all$ dpkg -S ‘readlink -f /vmlinuz‘
When I try to confirm by running the above, I get a lot of characters of output but the last line reads...
Code: Select alldpkg-query: no path found matching pattern /vmlinuz‘
How do I make sure my kernel is being managed through a packaging system?
Debian Configuration :: Openssl Update Reboot Necessary?
May 3, 2016Is it mandatory to reboot a public server after upgrading openssl? Or is it sufficient to restart the services?
View 2 Replies View RelatedDebian Configuration :: No Automatic Update Of The Kernel?
Nov 1, 2010I've just installed debian sid and see that I've the kernel 2.6.32. I was a bit surprise as on ubuntu I had the 2.6.35 and debian sid is supposed to be more up to date that ubuntu (maybe I'm wrong).So I checked what were the packages available :
mart@mart-laptop:~$ uname -a
Linux mart-laptop 2.6.32-5-686-bigmem #1 SMP Sat Oct 30 23:25:58 UTC 2010 i686 GNU/Linux
mart@mart-laptop:~$ sudo aptitude search ^linux-image
[code]...
Debian Configuration :: Prevent Driver To Do Update
Nov 18, 2010I have a PC that have a new Ethernet card that is not yet supported by Debian/Lenny.I downloaded the latests driver from the manufacturer and after a make;make install everything works like a charm.My problem is that one day after a probable update, Debian overrided my new driver by an other one causing my Ethernet card to shut down.After an other make install, everything work again like it should..But how do i do to prevent Debian to update my driver ?
View 1 Replies View RelatedDebian Configuration :: Update Linuximage Fails ?
Dec 9, 2010I have squeeze using the default setup with 5 seperate partitions on hard drive. All other updates are fine but it will not install the Linux-Image-2.6.32-5-amd64. I get message that not enough room. I think this is the kernal update. I use update manager. Is there a fix for this short of resizing the partition. This is a one computer/user setup. I had this problem on a previous install of stable and ignored it thinking that it was a glitch. That install was an experimental setup and I liked it but it didn't work on the internet very well so went to testing.
View 5 Replies View RelatedDebian Configuration :: Update - /tmp Permission Changed?
Dec 14, 2010This morning's update
root@squeeze:/home/me# aptitude update
[Code].....
Debian Configuration :: Update From Php 5.2.6 To Newer Version?
Dec 29, 2010there seems to be a very important bug with php 5.2.6 (mb_send_mail, [URL]). Unfortunately this affects my php applications greatly. I am currently running debian 5.0.7, with the latest updates. how to upgrade my php.
View 1 Replies View RelatedDebian Configuration :: Crashed After System Update
Jan 23, 2011I updated squeeze last night for the first time. It worked fine after 1st reboot last night. There was one reboot stalled at "hald" so I shut down and restarted. Worked ok 2nd time around
Today,upon login I got a string of taskbar notification (which I couldnt read as they all overlapped . I was able to see a kernel error message but couldnt report it (network was down) or save it (USB stick not recognised) Some programs worked, others didnt
I have the partedmagic rescue distro on USB stick so have those programs to use in order to fix the problem. Any idea how I can repair this? I tried fdisk for the hell of it. reported clean partition as predicted. I am using debian-testing-amd64-kde.
Debian Configuration :: LAN Connection Not Working After Last Update?
Mar 20, 2011About an hour ago i did an update on my Debian Squeeze. After the update was completed my LAN connection stopped working.. now i have to connect my computer to my router with a usb cable instead with my ethernet cable.. also, on the network connection, on the wired network section it says that the device(ethernet) has not been managed..
View 1 Replies View RelatedDebian Configuration :: Mouse Not Working After Update?
Jun 1, 2011after a long time I did a little upgrading of the packages...
bind9-host:amd64 (9.7.3.dfsg-1~squeeze1, 9.7.3.dfsg-1~squeeze2), linux-image-2.6.32-5-d64 (2.6.32-31.6.32-34squeeze1), dnsutils:amd64 (9.7.3.dfsg-1~squeeze1, 9.7.3.dfsg-1~squeeze2), linux-headers-2.6.32-5-common:amd64 (2.6.32-31, 2.6.32-34squeeze1),
[code]...
Debian Configuration :: Can't Update Properly - Packages Kept Back
Nov 25, 2014When trying to do a system update, I'm facing following error:
Code: Select allroot@machine: apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages have been kept back:
libdevmapper1.02.1
0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
1 not fully installed or removed.
[Code] ....
No such file or directory of an older and unused kernel? What's wrong with my system?
More about my machine, which runs Debian 6:
Code: Select allroot@machine: uname -a
Linux machine 2.6.32-5-686 #1 SMP Sat Jul 12 22:59:16 UTC 2014 i686 GNU/Linux
Code: Select allroot@machine: cat /etc/apt/sources.list
deb http://http.debian.net/debian/ squeeze main contrib non-free
deb-src http://http.debian.net/debian/ squeeze main contrib non-free
deb http://security.debian.org/ squeeze/updates main contrib non-free
deb-src http://security.debian.org/ squeeze/updates main contrib non-free
deb http://http.debian.net/debian squeeze-lts main contrib non-free
deb-src http://http.debian.net/debian squeeze-lts main contrib non-free
Debian Configuration :: Nouveau-driver Broken After Update
Jan 4, 2016Yesterday I installed some updates on my Jessie system (I don't remember if the kernel was also updated). After rebooting the system nothing happens after the "Loading intial ramdisk"-message. If I boot in recovery mode the boot stops at the message:
Code: Select allfb: switching to nouveaufb from simple
If I add "nouveau.modeset=0" temporary to the GRUB-entry for the recovery mode, it will boot up in the console-mode.
I was able to get an ethernet connection with "dhclient eth0" and removed the "xserver-xorg-video-nouveau" package. Then I installed it and the removed gnome-desktop again. Before removing it, aptitude said the following to the package:
Code: Select alli A xserver-xorg-video-nouveau
Now it only says:
Code: Select alli xserver-xorg-video-nouveau
But this didn't change my problem. I found a similar case in the internet, but there were no solutions for it: [URL] ....
The next thing I would do, is to install the proprietary nvidia-drivers, but since I have a GTX 960 video card, I would have to use experimental drivers. So I'm afraid to make it more worse trying to install this drivers.
Also I'm not sure if it really is a driver-specific of kernel-specific problem. My kernel is version 3.16.0-4-amd64.
Debian Configuration :: Squeeze Update Killed KDE4?
May 17, 2010I updated today and naturally removed the old nVidia driver, compiled it again after a reboot, and then rebooted again for good measure. I can log into KDE4, but all I get is a cursor and a solid black background. I deleted the ~/.kde, ~/.local, and quite a few other directories from my normal user account using the shell so KDE would reconfigure my settings when I logged in again, but it's the same problem. I went into ~/.kde/share/config/kwinrc and added the "Compositing" section with "Enabled=false" to rule out compositing. Now when I log into the system I get the default KDE4 wallpaper and a mouse cursor, but nothing else. I believe the latest update broke KDE4, or am I missing something? I have recreated my xorg.conf as well, and only set it to use the nVidia driver. So what can I do now?
View 3 Replies View RelatedDebian Configuration :: Adaptec AAR 2410sa - How To Update Driver
Jun 11, 2010I have the latest version of Debian installed on a Poweredge 1600SC. Everything is working ok, but the Adaptec AAR 2410sa PCI SATA card has started being a bit weird. I have a 1TB drive connected to it and noticed that occasionally it was unmounting the drive and messages appeared in the /var/log/messages like the following:
Jun 10 23:50:57 servertron kernel: [11246.006500] sd 1:0:2:0: [sdd] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
Jun 10 23:50:57 servertron kernel: [11246.006500] sd 1:0:2:0: [sdd] Sense Key : Hardware Error [current]
Jun 10 23:50:57 servertron kernel: [11246.006500] sd 1:0:2:0: [sdd] Add. Sense: Internal target failure
After a reboot everything would be fine. I did some research and heard that it could be the drive failing, so after running a disk check etc I connected up a new 1TB drive (was getting low anyway) to another SATA interface on the card and started trying to copy from one drive to another. Lo and behold, it happened on the new drive as well. Bugger.
I haven't had time to open it up and check the connections and will be doing this shortly, but thought I would check to see if it was using the best/newest driver, but am a bit stuck as to where to start. I've looked through some docs and help but can't really see how to update and check hardware drivers in debian.
lspci shows the following:
00:00.0 Host bridge: Broadcom GCNB-LE Host Bridge (rev 01)
00:00.1 Host bridge: Broadcom GCNB-LE Host Bridge
00:02.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02)
[code]....
Is there a newer version of accraid I can use? Even if there isn't, how would I go about identifying which driver the card is using and installing an update?
Debian Configuration :: All Of Packages Are Out Of Date - Update Not Working?
Jun 30, 2010So I just installed Debian Lenny on my PC (the install went fine). After installing, I went into aptitude and noticed that most of the packages available in the repository are out of date (python 2.5, GCC 4.3). System Update tells me that I am up to date, and when I tell synaptic/aptitude to mark all updatable packages, it does nothing. I have tried typing apt-get update as root aswell. Nothing worked.
I installed Debian with the first DVD from [URL]. During the installation, I told it to download anything that wasn't on the DVD. Shortly after installing, I had manually edited my /etc/apt/sources.list and commented out the CD line. Could any of this have messed up APT?