Debian Hardware :: Ralink USB WiFi Adapter Not Working After System Reinstall
Jul 12, 2014
I just did a Wheezy reinstall (I just started using LVM on LUKS), but my Ralink RT5370 usb wireless adapter wouldn't work, even though I have firmware-ralink installed. When I click on the Network Manager icon, it lists my home network (WPA2 passphrase) as available, but clicking on it yields no result.
Before the system reinstall, I've been using the adapter with firmware-ralink without problems. As far as "apt-get update && apt-get upgrade" goes, my system is up-to-date.
I tried uninstalling and then reinstalling firmware-ralink (rebooted too), but to no avail. The adapter seems to be undamaged.
Here are a few pieces of info that might be useful:
Code: Select all$ uname -a
Linux watershed 3.2.0-4-amd64 #1 SMP Debian 3.2.60-1+deb7u1 x86_64 GNU/Linux
Code: Select all# lsusb
...
Bus 004 Device 007: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter
[Code] ....
View 0 Replies
ADVERTISEMENT
Sep 14, 2014
I've just installed Debian Wheezy on my old Toshiba Satellite A10 (Intel celeron 2.20 GHz, 1GB Ram, 30 GB hard drive) and tried to connect to my home wifi network with a usb wifi adapter (Hamlet HNWU254G). lsusb in terminal says it is Ralink RT2501. Ethernet worked fine, so I installed firmware-ralink package, the adapter was recognized and I was able to connect.
However, I heard quite frequently a strange whistle and realized it came from the usb wifi adapter; it also got very very hot. Other strange thing: the computer some times freezes: screen flickering, loss of control of mouse and keyboard, need to shut down with power button.
At first I thought it was the video card not being powerful enough for Gnome (even classic), but then I installed Xfce4 and nothing changed. Instead, when working offline, freezes happen less frequently (but still happen).
I've tried the usb adapter on another laptop with wheezy: it gets hot, but there are no whistles and freezes.
View 1 Replies
View Related
Dec 23, 2015
On install my wifi was working, but when I rebooted it stopped working.Since then I've tried numerous things to attempt recovery of wifi. No luck so far.
View 14 Replies
View Related
Apr 19, 2010
I cannt get connection of my WIFI modem on UBUNTU 9.10(new installed) but it works on ubuntu 9.04(installed through WUBI.exe) without any driver. below is my lsusb report on UBUNTU 9.10
[Code]....
View 1 Replies
View Related
Aug 4, 2011
I have new emachine 1401 and I can't get it to connect to wireless. It does detect networks but when connecting keeps asking for password over and over and never connects. I don't have wired connection at all and the wifi router is not managed by me, so I'm retyping output through my windows xp samsung netbook which works over the same wireless network...
I have tries some other solutions I found around here (install bcmwl-kernel-source, rt3090-dkms_2.4.0.4, blacklist rt2800pci...) so it's not original configuration but behaves exactly the same.
[Code]..
View 2 Replies
View Related
May 3, 2010
using this Azio Wireless PCI Adapter[URL] (Network controller: RaLink Device 0701)
View 11 Replies
View Related
Jan 4, 2011
I have a fit-PC server with Debian GNU/Linux (Lenny). I would like to use it as a wifi access point since my Linksys WRT54GS has become unstable.I have a USB Ralink wifi NIC. When I insert the card to USB I can see this with lsusb: Bus 001 Device 002: ID 148f:2573 Ralink Technology, Corp. RT2501/RT2573 Wireless Adapter.I have tried following various HOWTOs on using wifi card as AP in Linux, however, it seems that the card cannot go into monitor mode. I believe this is because I must use a newer driver or upload non-free firmware or something like that.I have tried installed wicd, but it does not help.
I bought this wifi adapter because I was told that it is one of the most common used Linux supported wifi cards that can be used as access point and a lot of other stuff.How do I set up this USB wifi card as wireless access point in Debian Lenny?
View 2 Replies
View Related
Jul 9, 2010
Okay I've got a Netgear N-150 WNA 1100 USB WiFi adapter, it doesn't work in Ubuntu it's not supported. There should be a way to make it work with ndiswrapper. I tried and failed before and due to other non related circumstances I had to reinstall Ubuntu. What are the steps to install ndiswrapper and it's dependency's on a fresh Ubuntu installation that cannot connect to the internet.
View 9 Replies
View Related
Apr 17, 2011
WiFi adapter TP LINK WN821N is not working in 10.10, WN821N is notworking.
[Code]....
View 3 Replies
View Related
Jan 7, 2011
I have another thread started [URL] asking for support on configuring a Netopia TER/GUSB-N USB Wireless Adapter. But, I figured it would be interesting to get some opinions about other wireless adapters. I don't mind shopping on eBay for a new adapter or purchasing one at Walmart or BestBuy. So basically, I wanted to find out which wireless adapters are guaranteed to work out of the box after installing Debian. I am setting up webcam servers throughout my house and want to use the same hardware as much as possible. So if anyone has any recommendations on a wireless adapter that is proven to work and work well, please let me know.
Here are three that I can get pretty cheap at Walmart: Belkin N150 Enhanced Wireless USB Network AdapterNetgear WG111 Wireless-G 54Mbps USB 2.0 AdapterCisco - Valet Connector (Wireless N USB Adapter) AM10-4A
View 7 Replies
View Related
Jan 22, 2010
I have a rt2500 wireless USB adapter ( WLI-U2-KG54-AI ). I tried to use it on 2 computers loaded with Ubuntu 9.10. It worked well in WEP mode, but I am now trying to connect to a WPA router and the connection fails (the network manager icon keeps rolling forever). WPA works well on those machines when using another wireless adapter (not rt2500 based). This adapter also works well with WPA under windows. Is this device supposed to work with Ubuntu in WPA mode
View 9 Replies
View Related
May 10, 2009
I'm here because maybe this is a rare situation: I'm trying to mount a home server using a wireless card.
This is the output of my /sbin/lsusb code...
I'm trying to connect with this card but I don't know how.
View 19 Replies
View Related
Jan 7, 2011
The usb wifi adapter (airdata 150 s2 usb) which I have don't work well. The first time I put it on my computer does not work, so I installed this package [URL] but still not working. Then I search on intenet and found how to make it to work here [URL] that I do is add "blacklist rt2800usb" at the end of the file /etc/modprobe.d/blacklist.conf . After that usb wifi worked, but I have others problems. Some times it disconnect from the Internet and web pages are loading slow and some times do not load at all. Does any one know how I can make it work well? I am using Debian Squeeze.
[Code]....
View 2 Replies
View Related
Sep 5, 2015
I've installed Debian 8.1 on Lenovo G50-80 Touch. Ethernet is OK but the WiFi adapter is disabled. How can I enable it?
Code: Select alluname -a
Linux debianserv 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u3 (2015-08-04) x86_64 GNU/Linux[code][/code]
[code]lspci -nnk | grep -i net -A2
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 10)
Subsystem: Lenovo Device [17aa:3821]
Kernel driver in use: r8169
03:00.0 Network controller [0280]: Qualcomm Atheros Device [168c:0041] (rev 20)
Subsystem: Lenovo Device [17aa:3545]
View 4 Replies
View Related
Oct 2, 2015
I bought this wifi adapter to use with my home server running debian Wheezy [URL] ....
I installed realtek-firmware and wireless-tools(including NetworkManager and wpasupplicant). I rebooting and plugged in the wireless adapter and it didn't load the driver. After further research, I found that this adapter required the RTL8188EU driver, which I had to install manually. After manually installing that driver using the source from the iwfinger github [URL] .... and rebooting, I plugged in the wireless adapter and it worked. The wireless adapter seemed to work but after testing it under load(downloading a several GB file from the server and uploading a several GB file to the server) I ran into issues during the tests. I'm not sure what is going on but it seems the driver is failing or it is disconnecting from the network. I checked dmesg and this is what I found,
Code: Select all[ 5478.544704] RTL871X: reg 0x80, usb read 4 fail, status:-71 value=0x0, vendorreq_times:1
[ 5478.544707] RTL871X: reg 0x80, usb read 4 fail, status:-19 value=0x0, vendorreq_times:2
[ 5478.544710] RTL871X: reg 0x80, usb read 4 fail, status:-19 value=0x0, vendorreq_times:3
[ 5478.544712] RTL871X: reg 0x80, usb read 4 fail, status:-19 value=0x0, vendorreq_times:4
[ 5478.544714] RTL871X: reg 0x80, usb read 4 fail, status:-19 value=0x0, vendorreq_times:5
[Code] ....
I'm somewhat new to Debian and I'm not sure what else to do here.
View 3 Replies
View Related
Jul 31, 2011
I have a logitech c310 webcam. When I open cheese, I get a blank. Also my wifi adapter stops working - it doesn't show up on lsusb anymore. How do I fix this? How do I get both my wifi adapter and camera to work at the same time and how do I get my webcam to work? The adapter is D-Link DWA-125. Here are the outputs for lsusb:
[Code]...
View 2 Replies
View Related
Feb 21, 2010
I have been using ubuntu 8.10 for over a year and have recently upgraded my huawei modem ubuntu will not recognise my new modem which has wireless capability so I went and got this new usb wireless adapter to connect using the wireless, I have followed the trouble shooting and have the windows drivers installed all ok but it will not enable the device I am at a total loss how to make it do what I need, I will say I am very thick when it comes to using the code to do anything and yet I build pc's and repair them for a hobby O im 54 years of age.
View 8 Replies
View Related
May 20, 2015
Using a USB ISO, I recently installed Debian 8.0 Jessie (64-bit, Xfce DE) to a new computer. I usually lose my Wifi connection after 1-3 minutes when donwloading/uploading at around max. speed 4 Mbps/512 kbps. Sometimes it will last 15+ minutes.
When lightly browsing it can usually stay connected for 15-30 minutes. I have to disable and enable Wifi using NetworkManager to connect again. If I remember correctly, there were problems with the Wifi connection even during the installation of Debian.
This Wifi USB adapter works fine on my old computer with Debian 7.7 (32-bit). No problems with the Wifi connection yesterday on my old computer during 10+ hours of activity.
This Wifi adapter also works fine on this new computer when I boot from a live USB (Rescatux 0.30.2) downloading and uploading at max. speed for 1+ hour.
I already tried some suggestions I found online, but they didn't work:
* changing Wifi channels between 1, 6, 11 in my router settings
* changing WPA-WPA2 to WPA2 in my router settings
* ignore IPv6 in NetworkManager
* change probe_wait_ms from 500 ms to higher value by adding Code: Select alloptions mac80211 probe_wait_ms=1000 or Code: Select alloptions mac80211 probe_wait_ms=3000 to /etc/modprobe.d/mac80211.conf and rebooting
* disable Power Management for Wifi adapter (not supported)
* ...
I can also post the output of commands from Rescatux or my old computer if needed.
Output of commands on Debian 8.0 64-bit (I edited out some info, MAC, ...; not sure if that is important):
Code: Select alluname -a
Linux d8lnx 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13) x86_64 GNU/Linux
Code: Select alldmesg
...
[ 291.292408] ieee80211 phy0: wlan0: No probe response from AP XX:XX:XX:XX:XX:XX after 3000ms, disconnecting.
[ 291.459825] cfg80211: Calling CRDA to update world regulatory domain
[ 291.462030] cfg80211: World regulatory domain updated:
[ 291.462033] cfg80211: DFS Master region: unset
[CODE]....
View 14 Replies
View Related
Aug 26, 2015
I dual-boot Jessie with Windows 10, and I recently guessed that the 'fast boot' (hibernate on shutdown) feature of Windows doesn't properly shut down the RTL8188EU NIC plugged into my PC. So when I boot into Debian, it isn't properly recognised by the driver and I have to completely shut down the PC to make it work.
Is there a way to automatically cut the power to the wireless NIC on startup and then reenable it so I don't have to do this?
View 3 Replies
View Related
Aug 2, 2010
I have Lenny running on my old Toshiba Qosmio E10 via wired ethernet. what I need to do to get the intergrated wireless adapter recognised, configured etc.
View 4 Replies
View Related
Mar 11, 2010
I just purchased a RALINK WIRELESS G PCMCIA WIFI CARD VISTA/LINUX (UBUNTU).
It is supposed to be UBUNTU plug and play out of the box with no driver downloads needed.
I installed it but could not find a way to search the active Wi-Fi networks available like on my Actiontec card on windows xp. The wireless router/ethernet I have is an Actiontec setup for Qwest-DSL and Actiontec is the name of the wireless network.
Strangely I tried to choose setup a "new network" and entered Actiontec as the network name and it found the network and said it was connected to it. However the internet still is not working?
View 1 Replies
View Related
Mar 11, 2010
Has anyone ever heard of this card or have knowledge of how to configure it to allow me to get on the internet?
View 1 Replies
View Related
Jul 8, 2010
After having my usb wifi adapters working fine for some time, they stopped working and I can not get network connectivity.
Some one else was using my box and they reported seeing a kernel panic and then rebooted the box. Now there is no connectivity through the wifi interfaces.
I have seen the kernel panics related to this driver before, but usually a reboot has no ill effect.
Code:
root@Algalon:~# iwconfig wlan0
wlan0 RTxx70 Wireless ESSID:"a800" Nickname:"RT3070STA"
Mode:Managed Frequency=2.412 GHz Access Point: 00:0B:86:9A:08:80
Bit Rate=54 Mb/s
[Code].....
View 3 Replies
View Related
Nov 7, 2010
Im a Linux newbie and am running OpenSuse 11.3 (Gnome, 2.6.34.7-0.5-desktop Kernel) and Ive an Asus N13 wifi dongle (linux compatible). I currently connect using my laptopś internal wifi but I bought the dongle due to trouble with weak signal. It came with some sort of code that can be "compiled" but I havent got a clue how to do that (and I have been researching this matter for quite some time now). I then came across a post where someone with the same USB stick created and added only two small files to his filesystem and it worked...for him (maybe becasuse he was on a different Distro )
Ralink RT2870 USB Stick and created the two files mentioned in the post (network_drivers.rules and network_drivers.conf) and placed them in ETC... etc, etc! I rebooted the system but NetworkManager only lists it as "device not ready" ... So now back to square one.
[Code]...
View 9 Replies
View Related
Oct 19, 2010
I have an HP DV6 3143se which has a Ralink 3090 wifi card in it.the only thing that doesn't work at the moment is the Wifi. I tried installing the Linux backports module, but the trouble is that sometimes, my home wifi network is shown on the list of available networks and most often, it's not. when the network does show up, and i click on it and enter my WPA2 password, it takes ages to handshake and then it tells me that my password is wrong. the same password works in windows 7 so something's not working.
when i try to disable and re enable wireless network on the network manager applet, i get a Wireless device not ready or Network manager not running message.
[Code]....
View 9 Replies
View Related
Apr 29, 2011
I recently bought a HP g62x laptop for myself. It sports a decent Core i3 processor, 4 gigs of RAM and a 500GB HDD. It also came with Wireless-N, a real bonus because I am using a Wireless-N router. The chipset is a Ralink 5390. It came preinstalled with Windows 7, and everything works fine in there (obviously).
I then proceeded to install Ubuntu 10.10 x64 a few days ago (this is before Natty came out) and everything worked . . . except WLAN. So I plugged in via Ethernet and went looking and found that I clearly wasn't the first to discover this issue. I found a guide here that I followed to download the Ralink Linux driver (which is stated to support my chipset), configure, compile, and install. Everything went perfectly, I restarted; lo and behold, I have a list of access points. I went to connect to mine, entered the password, and now the animated "WiFi wave" logo keeps going indefinitely until you click it, and it freezes for a few minutes. It will unfreeze if you let it sit but clicking it causes the same freeze again.
I couldn't really care less about a WiFi icon freezing, but a.) it freezes everything else in the system up, not just the icon, and b.) it never actually completes the WiFi connection. I really, really don't want to be forced to use Windows because of a crappy WiFi driver!
Since Natty came out I installed that and I can't even compile the driver without fatal errors, so I reverted to 10.10 and everything is the same as it was before. Note that this is a clean Ubuntu 10.10 Desktop Edition 64-bit install, nothing updated/modified/changed besides (attempting) to install this driver.
View 1 Replies
View Related
Aug 3, 2010
I run a Squid 3 server that is acting as a web filter. It worked fine on Etch. The system stopped working properly due to two of the three SATA cables being bad. Before I figured that out, I tried doing updates. Since Etch updates were no longer available, I did a distupgrade to Lenny. Immediately, Squid stopped working properly. It would take up to two and a half minutes for it to respond to a web request and add it to the access.log. This was using the same configuration file that it was using before the update.
After I found the hardware problem, I did a clean install of Lenny. I used the basic squid.conf like I did on the previous system, only changing it to add my ACLs and because it wasn't saving an access.log to the default location unless I uncommented the path directive. Now, it won't respond to a request at all. Forwarding is enabled and the firewall seems to be set up correctly.
View 1 Replies
View Related
Nov 3, 2010
Anybody know how to get pictures off of one? I've got a computer with XP, but the software doesn't want to work. I've tried setting it up in a VM, but VirtualBox won't patch the camera through for some reason. The SD card adapter it came with stopped working, so that's a no-go.
View 2 Replies
View Related
Mar 13, 2011
Anyone knows what is the right driver for this device? It is not being recognized by the system, and there is no Atheros AR9271 on url
View 9 Replies
View Related
Nov 5, 2010
I can't seem to get my adapter to work on my Debian Squeeze system. I have the wpc54g linksys notebook adapter and disk... but the disk will not autorun...I have gotten as far as to the adapter being activated, shows connection 97%, but I can't surf!
View 6 Replies
View Related
