Debian Configuration :: Squid3 Access.log Size Too Big - Run Out Free Space
Mar 17, 2011
i have successfully set up squid3 with squeeze using guide on this forum viewtopic.php?f=16&t=59301 . The only problem that i have is the size of /var/log/access.log is too big and keep increasing so i run out of free space. The size of it always the same size as my free space hard disk (so it make me run out of free space in just one day, it can have size to 30 Gb ) right now , the only workaround i make is using crontab to rm access.log every hour . I'm sure this is not the right solution . Does anybody know the correct workaround about this ? I have searching in google but seems havent yet have luck with this .
View 5 Replies
ADVERTISEMENT
Jul 1, 2011
Command "sudo aptitude install oxygen-icon-theme" return following error:
dpkg: error processing /var/cache/apt/archives/oxygen-icon-theme_4%3a4.6.2-2_all.deb (--unpack):
unable to install new version of `/usr/share/icons/oxygen/22x22/apps/preferences-desktop-default-applications.png': No space left on device
[Code]....
As far as I can see oxygen-icon-theme unpacks only in /usr/share, beyond it I can think of only /tmp, /var or /var/tmp that it may use, all of which have plenty more than those ~40 MiB that it supposed to occupy unpacked. All btrfs filesystems were formatted with "-d single -m single". System is Debian Sid 64-bit with linux-image-3.0.0-rc5-amd64.
why dpkg may have trouble unpacking this package?
View 6 Replies
View Related
Aug 21, 2010
My laptop has 2Gb of ram, 4Gb of swap, 40Gb hdd and an intel pentium 1.40GHz cpu, even when compiling stuff or maxing out everything the 4Gb of swap is never touched, with such a small hdd I'd like to reduce the swap to about 2Gb (just in case) to free up some space, does anyone know what commands/tools are available to accomplish this?
View 3 Replies
View Related
Feb 17, 2011
In trying to solve a friend's lack of foresight, i have currently disabled my system.
I was using dd_rescue to make a copy of a drive with a corrupt and unfixable Partition Table. I was a fool, and had a drive mounted to /media/Storage, but ran the backup to /media/storage.
Thus, dd_rescue completely filled my primary drive before informing me that there was a problem.
I don't really trust myself with command line work, so I foolishly sudo'ed nautilus and deleted the folder /media/storage.
Unfortunately, I didn't realize it, but the available space on the drive still read 0bytes.
I tried Terminal work to do a sudo apt-get clean command, but for some inane reason, the laptop screen won't support the display setting for the Terminal login, so I just had to hope that I was doing it right.
I wasn't, and decided to try working from a Live CD so I could see what I was doing.
the folder /root/.Trash/ doesn't exist on Ubuntu's install drive, and I can't figure out why the properties of the drive say "contents: 241310 files, 3.7 GB" but also "Total capacity: 52.8 GB. Free space: 0 bytes"
Any suggestions on how I can get this to shake out?
View 3 Replies
View Related
Jul 25, 2010
I have 160gb laptop. i installed vista in c primary partition which is 25gb and installed ubuntu in d primary partition which is 20gb. A remainig for my data. Now i tried to install CENT OS by formatting ubuntu. I inserted CENT OS DVD and restarted and i selected to delete my /dev/sda2 which is showing 20480mb and it shown me free space. but i tried to add partion /boot of 100mb it got added. but, when i am trying to add / of 3000mb in the remaining 20380mb free space it showing an error message that no free space is available.
View 4 Replies
View Related
Aug 3, 2010
I run a Squid 3 server that is acting as a web filter. It worked fine on Etch. The system stopped working properly due to two of the three SATA cables being bad. Before I figured that out, I tried doing updates. Since Etch updates were no longer available, I did a distupgrade to Lenny. Immediately, Squid stopped working properly. It would take up to two and a half minutes for it to respond to a web request and add it to the access.log. This was using the same configuration file that it was using before the update.
After I found the hardware problem, I did a clean install of Lenny. I used the basic squid.conf like I did on the previous system, only changing it to add my ACLs and because it wasn't saving an access.log to the default location unless I uncommented the path directive. Now, it won't respond to a request at all. Forwarding is enabled and the firewall seems to be set up correctly.
View 1 Replies
View Related
Jun 16, 2010
During playing around sources, synaptic playing I messed up the default list. I know I should have been more careful. Anyways could someone tell me what the default the default sources.list that has free and non free etc for squueze please? I have been trying to get the default list but I cannot find it anywhere. There are alot of lists out there but nothing tagged like the "default" list.
View 6 Replies
View Related
May 18, 2011
I've got a question on free disk space. I'm currently running CentOS 5.5 on in Xenserver virtual environment. We've had an issue with disk space. My question is as follows: - from a ssh connection i run df -h this gives the value of 90% used leaving me with 9GB. If I use system monitor via a VNC connection the free disk space value is 20GB free on the same volume. Which one is correct? I do use SNMP to monitor the same volume and should alert me when < 10% is free I know this works as I set the alert threshold to < 90% I get an alert.
View 2 Replies
View Related
Jan 19, 2011
I have problem with my hard drive on Debian. I connected my hard drive as a local drive (NFS) in to Mac OS. Later i deleted some files on that hard drive from my mac but the free space didnt change. It looks like these files moved in to trash or something but i dont know where is it.
View 7 Replies
View Related
Feb 23, 2011
This weekend, I installed Debian Squeeze on my server. I've formatted all the hard disks to EXT4, and I'm using kernel version 2.6.32-686-bigmem.When I tried to install the program saidar, it surprised me why it does not show my hard drives under 'mountpoint' [URL] <-- Saidar screenshot) as I could when I ran with Debian Lenny with the same kernel, but where the hard drives were formatted in EXT3. My laptop which has Ubuntu 10.04 as OS and the hard drive is formatted in EXT4 can easily show the hard drive in saidar.
I also tried to install PHP SysInfo on the Debian computer, but it does not bother to show anything on the hard disks
I tried to check fstab file and I can see that Debian uses UUID to identify the hard drives, but I've tried to change it to something with /dev/sdx, but it did not help either.[URL] (fstab file)
I know that Debian squeeze is very new, but it would be nice if someone could give me a hint what might be wrong, because I am a little tired of all time to use 'du-hs' command To find out how much space is spent on the various drives, since the command is a little slow, since hard disks are well filled.
View 2 Replies
View Related
Feb 24, 2010
I can't find out why that are invisible files using /var/log space
Code:
# du -hs .
5,3G .
[code]...
View 3 Replies
View Related
Feb 3, 2010
I have Squid3 running and SARG for producing report. I would like to see the hostname being logged in the access.log file instead of the client IP address. I have already set the option log_fqdn=on and it doesn't do it. I still see the client IPs in access.log files...
View 4 Replies
View Related
Jun 7, 2010
I was trying to install Fedora 13, on to my laptop. I have 30 GB of unallocated space in extended partition. When trying to install Fedora 13, I got stuck, as the installer says that there is no free space for installation.can convert the unallocated space into free space.
View 1 Replies
View Related
May 25, 2010
i used gddrescure to clone an 80gb harddrive and this is the result ROFL.i guess you can only do this making sure the target drive is the same size, you see i didnt know lol so..i now have THIS problem.can anyone tell me how to turn my unallocated space into a usable 'free' space? i could play with gparted right now but i dont wanna do anything wrong, so if theres anyone who can tell me how to do this.
View 1 Replies
View Related
Dec 30, 2010
I have red hat linux server and it has mysql installed whenever i write on terminal command mysql -u root it shows error "ERROR 2002 (HY000): can't connect to local MYSQL server through '/var/lib/mysql/mysql.sock (111) "
And another problem is that it is showing 0 byte free space istaed of freeing the space. it may seems that both problems are dependent on each other.
View 6 Replies
View Related
Jul 22, 2010
i made space by shrinking my window partition and so i have unallocated and would like to add to sda2 to have more space. Check out this pic. How can i do this?
View 1 Replies
View Related
Jul 5, 2011
My system is dual boot with win7 and ubuntu. I have free space of around 10 gb. I want to add this free space to my ubuntu drive. How can i do that?
View 4 Replies
View Related
Oct 21, 2010
I installed SQUID3 on a Linux machine with two ethernet interfaces (eth0 and eth1). I used the default settings in the squid.conf file and uncommented the two lines
Code:
And
Code:
eth0 is connected to a router, which provides Internet access. It is assigned an IP 192.168.1.2 by the router. I manually configured eth1 to have an IP address 192.168.5.1. It is connected to a switch. Systems having IP addresses 192.168.5.x are connected to this switch. I ran these two commands for NAT:
Code:
Code:
But when I try to access internet from a system having IP 192.168.5.2 through the proxy I get an error that says "Access denied". What is wrong with my configuration?
View 1 Replies
View Related
Oct 17, 2010
I have a big partition ext3 and System Monitor show me that there are 14Gb of Free space but only 4Gb of Available space.
View 4 Replies
View Related
Jun 6, 2011
1- I'm trying to install the ATI Mobility Radeon HD 5470 driver over the non-free repository ...the problem is that until now i didn't found a recent documentation ...and to be honest i don't know which procedure should i use to rightly install the driver .
2- I have two graphic cards (integrated Intel with the i5 processor), and i can't change the default one to the ati! because debian had set the intel card as a native one...! that's why i´ m wondering if just an installation of the non-free drivers will solve this or not! I think every body will ask me how the lspci output looks like so here is it : 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
[Code]...
View 8 Replies
View Related
Dec 15, 2010
My debian 5 is up and running smoothly and act as file-server in the middle of windows network jungle using samba the only problem is, after backup an external hdd (213 GB) to my /home partition, I end up with message say that I'm running out free space. Fyi my debian installed on 1TB SATA disk, and I separate my /home partition from system what happen to my free space ? here is screenshot of my disk, using disk usage analyzer: is there is a way to get my space back or something missing on my setup.or I have to reinstall my debian and use LVM when partitioning my disk?
View 8 Replies
View Related
Jul 13, 2011
My laptop has /dev/sda5 mounted on /. It has 10GiB and almost full. I formated Windows XP partition and it is now /dev/sda1 ext4 45GiB free space.When I mounted /dev/sda1 to root (/) directory, df commands showed still the original partition size. (81% used).
View 3 Replies
View Related
Jul 31, 2011
I am using Squessze and Gnome. When I try to use the gui System>Administration>Network or Users and Groups I get the error The configuration could not be loaded. You are not allowed to access the system configuration.Everything was working before. I read around a bit. In some cases,it was caused by mismatching group and password files after using the gui. I do not know how to check if they are matching. Of course I do not know for sure that is the problem in my case.
View 14 Replies
View Related
Mar 15, 2016
Debian Version: 8.3 (Jessie) KDE (although this is NOT a desktop issue)
Basic Hardware:
Gigabyte Motherboard GA-970A-D3P
AMD 8350 CPU (8 cores)
32 GB DDR3 RAM
120GB SSD SATA-6GB/s
750 WD Black SATA-6GB/s
I am getting "Error: No space left on device" regularly during updates or installs, but why. Here is data on the disks, filesystems, etc...
Code: Select all df -h
Filesystem   Size Used Avail Use% Mounted on
/dev/sda1Â Â Â Â 81GÂ Â 27GÂ Â 50GÂ 35% /
devtmpfs     16G   0  16G  0% /dev
tmpfs      16G  76K  16G  1% /dev/shm
tmpfs      16G  18M  16G  1% /run
[code]...
Seems very doubtful that inodes are the killer.I have googled and followed all the threads, and search these forums and found nothing that fits - every answer there was focused on avaiolable space and inodes..And to make the cheese even more binding, the issue has cropped up on another 8.3 system with far more disk space (larger hard drives) and lots more unused inodes
Code: Select alldf -h
Filesystem            Size Used Avail Use% Mounted on
/dev/dm-0Â Â Â Â Â Â Â Â Â Â Â Â Â 907GÂ 6.6GÂ 855GÂ Â 1% /
udev                10M   0  10M  0% /dev
tmpfs               995M 9.2M 986M  1% /run
tmpfs               2.5G  76K 2.5G  1% /dev/shm
tmpfs               5.0M 4.0K 5.0M  1% /run/lock
tmpfs               2.5G   0 2.5G  0% /sys/fs/cgroup
[code]...
View 11 Replies
View Related
Jul 11, 2011
I have deb6 installed in VMWARE ,i am posting my fstab config file
/dev/mapper/debian-root / ext4 errors=remount-ro 0 1
# /boot was on /dev/sda1 during installation
UUID=0e7bc1e7-4f8c-4dee-a6e9-ae6d0669755e /boot ext2 defaults $
/dev/mapper/debian-home /home ext4 defaults 0 2
[code]....
View 14 Replies
View Related
Jul 2, 2010
I just tried to download a torrent and got an error message indicating there was no space left in the download location I'd specified.
This happened earlier when df -h showed ~900M of free space. Just now, I'm showing ~2.2G of free space. Anyone have ideas what could be causing this?
View 9 Replies
View Related
Mar 13, 2010
I just expanded my raid 5 array from 3*2TB to 4*2TB and mdadm made the grow successfully and shows an md0 dev with the size of 6TB usable data. Now my problem is that Debian (Lenny) dosn´t show the right amount. See below
######### MDADM DETAILS OF ARRAY ##########
> mdadm --detail /dev/md0
/dev/md0:
Version : 0.90
Creation Time : Mon Dec 14 22:30:46 2009
Raid Level : raid5
[Code].....
View 3 Replies
View Related
Jul 24, 2011
I am trying to re size a drive but after a message of successful resizing, nothing changes !
This is original size
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/k9-root 322M 253M 53M 83% /
tmpfs 2.0G 0 2.0G 0% /lib/init/rw
udev 2.0G 204K 2.0G 1% /dev
tmpfs 2.0G 1.0M 2.0G 1% /dev/shm
/dev/sda1 228M 15M 201M 7% /boot
[Code]...
View 6 Replies
View Related
Feb 19, 2010
I seem to have a major discrepancy between what df reports and what du reports. df tells me that I am using 20G, but I am only able to find 9.5G using du. What follows are the ls -l of root, a df of my system, and the du for every directory in root that is not a symbolic link, mnt, or proc. I would appreciate any suggestions on where to look for the remaining 10.5G that seems to have disappeared.
I am running under VM Player code...
View 3 Replies
View Related
Apr 14, 2011
How to compile squid3 on debian ?
View 1 Replies
View Related
