CentOS 5 :: Unable To Install Nvidia-graphics?
Nov 10, 2009
I have installed/enabled centosplus, by using the command: yum update kernel --enablerepo-centosplus
Now I seem to be unable to install nvidia-graphics. When I use the command: yum install nvidia-graphics, I get the error: package kernel-2.6.18-164.6.1.el5.centos.plus.i686 (which is newer than kernel-2.6.18-164.6.1.el5.i686) is already installed
The nvidia-graphics bit is coming from atrpms - the kernel is coming from updates. What exactly does this mean? Does it mean that nvidia-graphics has not been built for this version of the kernel (centos-plus)? I am hoping to use centos-plus, as I need the support for DVB cards.
View 8 Replies
ADVERTISEMENT
Apr 12, 2011
I have just had to install CentOS 5.6 on a family members computer, as they lost there Windows XP key. Anyway, I am needing to install a new nvidia graphics driver. I found a howto on this forum for 5.2 [URL]
View 5 Replies
View Related
Jul 9, 2011
Infact I've seen the linux(ubuntu 11.04) for the first time today. I don't know anything about linux & i'm not able to install my nVidia 8600gt graphics driver. I've downloaded the .run file from here
[URL]
when I'm opening the .run file it's showing an error
"Could not open the file /home/f1/Downloads/NVIDIA-Linux-x86-275.09.07.run.
gedit has not been able to detect the character encoding. Please check that you are not trying to open a binary file. Select a character encoding from the menu and try again."
After trying for all day long I found this HOWTO
[URL]
View 2 Replies
View Related
Nov 3, 2009
I have just installed Kubuntu 9.10 in my laptop and it did not ditected my Nvidia 8400 M GS graphics Card I downloaded a driver file
NVIDIA-Linux.x86-19042-pkg1.run to install drivers but when i run it it shows the error error:you appear to be running X server, please exit X before installing.
View 5 Replies
View Related
Jul 28, 2009
So I have been trying to install these drivers forever and after going through a million forum posts and Google searches I have been unsuccessful. The process I have been trying starts as such: I hit ctrl-alt-f1 and then login as root. i then change to run level 3 by doing /sbin/init 3. After that's done I cd to desktop and do sh NVIDIA-LINUX-x86-185.18.29-pkg1.run --kernel-source-path /usr/src/kernel/2.6.18-128.2.1.el15-i686
If I don't give it the source path it can't find the source tree. Eventually I get the error: ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from
[Code]...
View 5 Replies
View Related
Jul 10, 2011
Am using ACER Aspire 5745G which has switchable graphics. I recently installed Ubuntu 11.04 - the Natty Narwhal i updated everything after the installation. Now the issue is that when i go to NVIDIA X Server Settings, its giving me an error message:- " You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server. " Error.jpg also tried searching in the forum but it was so confusing, as am Newbie i have no idea where to start.
View 2 Replies
View Related
Apr 8, 2010
I have already installed Debian testing and now looking to install Nvidia drivers version 190.
I had downloaded the Nvidia driver from their site but the way it installed on Ubuntu is not the same here in Debian. Obviously, I failed.
View 14 Replies
View Related
Sep 1, 2011
Installed Ubuntu 11.04 but i don't know how to install my nvidia 7200 gs graphics card. in the previous versions (ubuntu 9.10) it installed very easly.. But in Natty 11.04, while i am try to install my driver it fails 2 times and after installation (reboot) ubuntu freezes and not working So reinstalled ubuntu 11.04.
View 3 Replies
View Related
Jun 8, 2011
I'm trying to install the drivers for my nvidia graphics card. I downloaded the shell script from the nvidia website. However, there's something peculiar going on. When I execute the shell script it says it cannot find my kernel headers, yet I can verify that my /usr/include/linux/kernel.h does exist. I have selinux on, but just installed os with it on, so contexts are fresh. Checked them as well. After doing some research I found something out. When I run a 'uname -a' I get this.
Code:
Linux ariel 2.6.18-194.el5PAE #1 SMP Fri Apr 2 15:37:44 EDT 2010 i686 i686 i386 GNU/Linux
Yet when I ran 'yum install kernel-devel kernel-headers' they installed the following versions.
Code:
kernel-headers-2.6.18-238.12.1.el5.i386
kernel-devel-2.6.18-238.12.1.el5.i686
Shouldn't they be
[Code]...
I see that the error in the nvidia shell script can't locate the header files for the RUNNING kernel version which makes sense. Why would yum install that version instead of the one in 'uname -a'? Or am I misunderstanding something?
View 3 Replies
View Related
Jan 26, 2010
I have just installed Ubuntu (9.10) and noted that in order to successfully run the trial off the CD I had to test in "safe graphics" mode. I have an NVIDIA GEforce 6600 GT card - which was discovered by Ubuntu in the first few minutes of the trial and so I activated the recommended driver and continued to test. After a successful trial I installed Ubuntu (dual partition Ubuntu / Windows XP), however, it seems the install didn't activate the required driver (as part of the process) and so I'm unable to get into my newly-installed Ubuntu at all. All I get is a flashing tty screen asking for my username and password - however it's erratic and won't recognise what I type. So - I'm stuck in a catch-22 as there doesn't seems to be a safe graphics mode option via the start (GRUB?) menu list.
View 4 Replies
View Related
Sep 2, 2010
I have a Asus UL80j, Nvidia GeForce 310m w/ 1gb mem, i3 core processor and 4 gb ram. Windows 7 HP came on, I love Fedora so I dual boot. I installed the Fedora 13, did yum update all is good. I attempt to use the compiz for cool effects however, it freezes my system.
I attempt to install the nvidia graphics driver from thread [url] and follow the instructions to perform the install and reboot.
First it loads the fedora logo like always and then boom, black screen with a blinking white underscore mocking me. Reboot once more and get the load out of pass/fails and see nvidia.ko for kernel...... [NOT FOUND] blah blah [FAIL] blah blah [FAIL]
View 3 Replies
View Related
Jul 16, 2011
I've just acquired an Lenovo ThinkPad W520, installed openSuSE 11.4 - and tried to install the Nvidia driver... but the X won't start at next reboot due to the following error: "GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors." Revision: 0x09I've tried to install drivers as described at: SDB:NVIDIA drivers - openSUSE - both with click install, and the repositorie way, I blacklisted the "nouveau" driver and "NO_KMS_IN_INITRD" is set to yes!
View 2 Replies
View Related
Jan 22, 2010
I did not find my graphics card in the HCL/Nvidia video cards thread. I looked in YaST for drivers & found none. My desktop pc freezes after the system loads so I cannot use my system. I understand about the level '3' boot option for tty input. How would I download/run the nvidia installer from tty?
View 4 Replies
View Related
Nov 26, 2010
I've installed CentOS 5.5 64 bit on a Dell Latitude e6410. This model only contains Intel HD Graphics, not the extra Nvidia card you could also buy in addition. The getinfo output can be found here:[URL] Initially X11 did not work at all (blank screen), but using hints from other posts in this forum I was able to fix this by editing the file xorg.conf using the vesa driver, although I still do not get the native screen resolution of 1200x800 (I alwas get 1152x768).
Now I want to add an external monitor (Samsung Monitor connected via DVI, screen resolution 1680x1050). Unfortunately as soon as I try to configure the dual head mode using the system-config-display tool after restart of the X server there will be the the blank screen again. I tried various drivers with no luck.Has anyone succeeded setting up dual head on an Intel HD Graphics machine? I understand that this hardware is quite new and and would be easier to set up with more recent distros, but I would like to stick to CentOS, but cannot wait for CentOS 6.
View 1 Replies
View Related
Mar 22, 2011
I am impressed with 11.4 and am happy that for the first time ever I don't need to install a kernel patch to support my on-board nVidia graphics. However, the on-board sound no longer works now. I don't know how to set it up in phonon. My device number 0 in phonon is MCP72XE/MCP72P/MCP78U/MCP78S high definition audio, and I assume this is my nVidia on-board sound card. The driver information states snd-hda-intel.
How can I check what is wrong with it? It did work fine on 11.2 right up to the 11.4 installation. I do get system sounds (like the start-up and shut-down sounds), but nothing from any application, e.g., firefox playing a video. Based on the advice from another thread I tried: speaker-test -c2 -l5 -twav This does not produce any sound, but gives the following information: speaker-test 1.0.24.2
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
WAV file(s)
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 96 to 1048576
Period size range from 32 to 349526
Using max buffer size 1048576
[Code]...
View 9 Replies
View Related
Apr 26, 2009
I have a Packard Bell Imedia desktop with on-board ATI graphics. I also have a spare Nvidia PCI card. Is there a way I could use the Nvidia to run a second screen, if so how as the Nvidia and fglrx drivers seem to collide in a show stopping way!!I am running Kubuntu Intrepid, but have resorted to Gnome as KDE4 went spectacularly wrong on me.
View 5 Replies
View Related
May 18, 2009
I want to install a lineage 2 server on a vps... I have bought it and I have receiver connection details with ssh -.- . It's possible to install graphics interface from bash line because I don't know to set up a l2 server from bash line...
View 9 Replies
View Related
Jan 3, 2011
when i start uubuntu it automatically goes to tty with out letting me login. then when i press startx it says:
NVIDIA: failed to initialize the nvidia graphics device pci:0:13:0
nvidia: please check your systems kernal log for additional erroe
nvidia: messages and refer to chapter 8
nvidia: failed to initialize the nvidia graphics device!
nvidia: screen found, but none have a usable configuration
fatal screen error: no screen found
right before this i had activated a nvidia graphics device
View 9 Replies
View Related
Feb 9, 2009
When I go to System>Administration>Hardware Drivers a new window pops up (no proprietary drivers are in use for this system). I click on version 177 and activate, but all that happens is a smaller window comes up (downloading and installing driver) although it never goes over 0% and then quickly disappears without any "changes applied" message.
View 9 Replies
View Related
Oct 15, 2010
i tried to go threw this by some tutorials on the wiki but without success. i all the time got this error: Nvidia log: [URL].. even if i ran the make oldconfig && make prepare command..
View 8 Replies
View Related
Feb 16, 2010
I installed openSuSE 11.2 three days ago, the first time, and have been trying to get the nvidia video driver to work ever since. So far, no luck. I have a dual-boot system with Windows 2k (legacy programs) and the graphics card works fine there, so the problem isn't hardware related. The nv driver also works under 11.2, but not well.The graphics card is a GeForce 6200, and the computer is an old Tyan Thunder S2885 with dual Opteron processors. I'm in 64 bit mode for the Linux install.
I've tried installing the video drivers by:Doing a fresh install, loading in the nvidia repository, then doing online update. The two nvidia drivers were loaded (nvidia-gfxG02-kmp-desktop and x11-video-nvidiaG02), but when I tried to reboot I end up with a blank screen and no sync to the monitor (Hitachi SuperScan Elite 751 CRT type). Rebooting in safe mode brings up the nv driver, which works. Doing a fresh install, doing online update,then loading in the nvidia repository, refreshing it, and installing the same two RPMs . . . with the same result. Doing a fresh install and using the "one click" install from this web site. Same result.
Doing a fresh install, doing online update, selecting the pattern "Linux Kernel Development" and installing it, downloading the Nvidia installer NVIDIA-Linux-x86_64-190.53-pkg2.run and installing it. Same result.
Same as above, but then using Sax2 -r -m 0=nvidia, even though Sax is depreciated. Same result. I've tried modprobe nvidia. Nothing. Over the last two days I've probably tried several other iterations as well, and forgot them, but nothing worked, it's always the same result.
Another weirdness, when I have YaST do "Hardware Information" it has no trouble identifying the monitor a getting it's info, but when I click the Display icon on the panel it tells me that it can't identify the monitor.
Here's the basic system info:
Code:
Directory: /home/BillyDoc/Desktop
Tue Feb 16 09:21:23 CST 2010
BillyDoc@linux-k7w3:~/Desktop> lsmod | grep nvidia
nvidia 9647368 0
BillyDoc@linux-k7w3:~/Desktop> su
[code]....
I'm definitely a novice to this sort of thing, and at this point I haven't a clue what's going on. It looks like the nvidia driver get's installed alright, but X simply doesn't know it's there. Oh, and another thing. When I go into YaST to look for the "Graphics Card and Monitor" program . it's missing! I assume this is because Sax is depreciated, but what's the substitute?
View 9 Replies
View Related
Mar 4, 2010
This is my first day with Umbuntu and my first post here at the forums. I bought a Dell Pentium 4 with a fresh install of Umbuntu 9.10 on it. Worked well until I decided to do something a newbie shouldn't do and install a graphics card and drivers. The graphics card worked just fine until the drivers were installed and I tried to reboot the system. Now it no longer boots. Some specifics for you.
Since my time with Ubuntu is limited to hours, the nomenclature will probably be wrong. But I will try to get the point across. The card is a EVGA GeForce FX 5700 Ultra. On first start up with this card the computer functioned fine. I went to a place where you could change the screen options. There were three selections and I don't remember the names (idiot that I am). I selected the middle one. The OS stated that in order to utilize all the capabilities of nvidia graphics cards blah, blah, blah, a driver would need to be downloaded and activated. No name, just a driver. OK, do it (sounds kinda windows like). The download seemed to go OK, but now I needed to reboot to activate the driver.
Now: Ubuntu logo comes up. Screen goes to a text screen that says:
Ubuntu 9.10 dave-ubuntu tty1
dave-ubuntu login:
This screen flashes and does not take input from the keyboard or mouse. Next, I removed the graphics card and used the on-board graphics. Same result with faster flashing. What have I done? Apparently Ubuntu and Linux in general don't have a system recovery option? I read something about the GRUB menu, but the system flasher GRUB loading for half a second and then is on to locking up. I can't seem to get to a GRUB menu. What a way to finish the day.
View 9 Replies
View Related
Apr 7, 2011
Im new to linux. Im trying to install 11.4 on my desktop. When i try to run the live CD (GNOME) .. after loading the kernel, the screen with just a progressbar appears and the screen crashes, as in some parts of it goes black.. Although, i can install it perfectly, when the OS boots the same kinda screen appears and crashes My system config- intel i7-870 4 core 4GB RAM nVidia GeForce 9800GT 1GB i need to get rid of windows fast.
View 9 Replies
View Related
Sep 25, 2009
I was recently able to obtain a new laptop at work. Rather than reinstalling the OS, reconfiguring all of the software, and then copying over all of my data from my old laptop -- I decided to try to use dd to clone my drive. It worked pretty darn well (thanks Saikee!). However, I have two problems that I have noticed so far:
1) The system does not seem to offer me the option to install the proprietary nvidia driver. I was able to manually install the nvidia-glx-180 package and then edit xorg.conf appropriately and I'm running with the nvidia driver now. So this problem is resolved (though I still find it odd it didn't even offer my the "restricted hardware drivers" option in System -> Administration).
2) Wireless is not working. I checked dmesg and it doesn't seem to have any errors in it. Here is a list of things I have checked/found which I think might be relevant:
- Oddly enough it seems that my wired device always gets renamed from eth0 to eth1, and my wireless device gets renamed from wlan0 to wlan1. I'm not sure why (though I would prefer them to be eth0 and wlan0).
- dmesg output looks good shows some message about the wlan1 link not being ready
Code:
bmayes@bdmlin:~$ dmesg | grep wlan
[ 10.915831] udev: renamed network interface wlan0 to wlan1
[ 185.179556] bridge-wlan0: peer interface wlan0 not found, will wait for it to come up
[ 185.179559] bridge-wlan0: attached
[code]...
View 10 Replies
View Related
May 4, 2010
After upgrading kernel package to 2.6.32-5 NVIDIA installation gave me ERROR:Unable to load the kernel module 'nvidia.ko'. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from obtaining ownership of the NVIDIA graphics device(s), or NVIDIA GPU installed in this system is not supported by this NVIDIA Linux graphics driver release.
Here is /var/log/nvidia-installer.log:
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Tue May 4 11:49:38 2010
installer version: 1.0.7
[code].....
View 12 Replies
View Related
Feb 24, 2009
I need to install the 180.29 driver since I need OpenGL 3.0 (I'm a developer). I'm using CentOS 5.2 x86_64. I came across this thread, [URL].. and it says it doesn't work in CentOS because of a conflict with synergy. I don't know what synergy is, is it simply something I can remove? I'm not sure if I should expect the same problem as described in that thread with the 64-bit version. Which install procedure should I use to try this driver? If I do try it, I need to know how to revert back should I experience this issue and not be able to get into a graphical environment.
View 3 Replies
View Related
Jul 15, 2009
I have installed:
yum list installed kernel*
Loaded plugins: fastestmirror, kernel-module, kmod, priorities Installed Packages
kernel.i686 2.6.18-92.1.18.el5 installed
kernel.i686 2.6.18-92.1.22.el5 installed
kernel.i686 2.6.18-128.1.6.el5 installed
[code]....
View 10 Replies
View Related
Jul 3, 2010
I have Fedora 11 installed on a system that initially had an ATI 1650 type card. I recently replaced it with a GeForce GT 220. I don't believe there was ever an xorg.conf generated or used with the ATI card. Initially, when I replaced cards and rebooted, I was able to start up KDE or GNOME but with only 2 very low resolutions available(the highest being 800x600). Next I ran Xorg -configure to generate an xorg.conf file. Everything I am seeing in this file seems to make sense. But now, when I startx all I get is a red error box being displayed by the CRT monitor with this message:
Signal Frequency is out of range
FH 30.1 kHz FV 24 Hz
Please Change Signal Timing
The only way I can get my X system back is to go into the xorg.conf file (in the Device Section) and change the driver to vesa. But I still only have 2 very low resolutions available.
View 6 Replies
View Related
Mar 23, 2011
This is to request the communities assistance with the following: As the title suggests, I am attempting to install 10.04.2 LTS on a PC equipped with an ASUS M2NPV-VM mobo and integral NVidia GeForce 6150 chipset/card and AMD dual processors.
Result: While the CD with the installation software loads, the splash screen comes up distorted and is displayed as several black and white horizontal bars. I have tried this with low end monitors with a VGA input with the same results. It appears to me as if though the video driver on the installation CD is not suitable for the mobo's chipset, but I may be wrong.
View 5 Replies
View Related
Nov 6, 2010
I have an i5 Thinkpad running Windows 7 64-bit. VT is enabled in the BIOS. I have installed vmware server v 2.0.2 but am unable to install Centos 5.5 x86_64 as a guest OS. The steps that I followed are as follows:1. Created a new VM, specifying RHEL 5 64-bit as the intended guest OS (per vmware documentation - Centos is not available as a selection2. Downloaded all 8 iso files for Centos v5.5 64-bit3. Modified the CD/DVD drive to 'connect at power' and use an iso with the path pointing to the x86_64 iso 1 of 8When I power up the VM, the console window displays 'ISOLINUX 3.11 2005-09-02 Copyright (C) 1994-2005 H. Peter Anvin' and nothing else. The installation splash screen never appears. As a test, I downloaded the first of 7 iso files for the 32-bit version of Centos 5.5 and pointed the CD/DVD drive to that iso. In that case, the installation starts as expected. I would really like to get the 64-bit version installed and running.
View 3 Replies
View Related
