OpenSUSE Multimedia :: Install A Kernel Patch To Support On-board NVidia Graphics?
Mar 22, 2011
I am impressed with 11.4 and am happy that for the first time ever I don't need to install a kernel patch to support my on-board nVidia graphics. However, the on-board sound no longer works now. I don't know how to set it up in phonon. My device number 0 in phonon is MCP72XE/MCP72P/MCP78U/MCP78S high definition audio, and I assume this is my nVidia on-board sound card. The driver information states snd-hda-intel.
How can I check what is wrong with it? It did work fine on 11.2 right up to the 11.4 installation. I do get system sounds (like the start-up and shut-down sounds), but nothing from any application, e.g., firefox playing a video. Based on the advice from another thread I tried: speaker-test -c2 -l5 -twav This does not produce any sound, but gives the following information: speaker-test 1.0.24.2
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
WAV file(s)
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 96 to 1048576
Period size range from 32 to 349526
Using max buffer size 1048576
[Code]...
View 9 Replies
ADVERTISEMENT
Nov 19, 2010
stuff about a kernel speed up patch? Here is one Article The Linux desktop may soon be a lot faster - Computerworld Blogs And Yet another even stranger kernel speed up here:
Alternative To The "200 Lines Kernel Patch That Does Wonders" Which You Can Use Right Away ~ Web Upd8: Ubuntu / Linux blog I have no idea if any of this stuff is true, but lets see some of our high power guys check it out and let us know what is true or not.
View 9 Replies
View Related
Mar 15, 2011
I just got an LG widescreen monitor, but i just cant set it to use a widescreen definition. It still has my old CRT monitor as the default and it does not recognize the new one Im using the nvidia card and its own settings driver.
View 9 Replies
View Related
Jul 16, 2011
I've just acquired an Lenovo ThinkPad W520, installed openSuSE 11.4 - and tried to install the Nvidia driver... but the X won't start at next reboot due to the following error: "GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors." Revision: 0x09I've tried to install drivers as described at: SDB:NVIDIA drivers - openSUSE - both with click install, and the repositorie way, I blacklisted the "nouveau" driver and "NO_KMS_IN_INITRD" is set to yes!
View 2 Replies
View Related
Jan 22, 2010
I did not find my graphics card in the HCL/Nvidia video cards thread. I looked in YaST for drivers & found none. My desktop pc freezes after the system loads so I cannot use my system. I understand about the level '3' boot option for tty input. How would I download/run the nvidia installer from tty?
View 4 Replies
View Related
Sep 12, 2010
I was reading the latest openSUSE news #140 under the kernel information and I found something I felt anyone interested in the future of Graphics Support in the kernel should read. It was very interesting for me to read and so maybe the same for you.
Kernel Log: Coming in 2.6.36 (Part 1) - Graphics - The H Open Source: News and Features
View 5 Replies
View Related
Apr 8, 2011
I just want to upgrade my Slackware 13.1 kernel (2.6.33.4) to the latest stable kernel from kernel.org (2.6.38.2). I have never done anything like this and I am a Linux newbie, so I would appreciate a "Kernel Patching for Dummies" version if possible. I did do a search on this forum and most of what I read was over my head. I found an FAQ on kernelnewbies.org on "How To Apply A Patch" but when I attempted what they suggested, it said it couldn't find the file to patch at line 5 and asked me which file to patch. So I CTRL-Z'd out of there and came here. Here's what I tried:
[code]...
View 14 Replies
View Related
Jul 17, 2010
It's documented in the howto's that you need to have the nomodeset kernel parameter specified if you want to run the proprietary Nvidia driver. But I read in certain posts that this is only required for "older" graphics cards.Can someone shed some light on this? Is the parameter ALWAYS required when running the nvidia driver, or only for certain graphic cards?
View 9 Replies
View Related
Apr 3, 2011
I own an ASUS N61JV-X2 notebook PC that has an Intel HD IGP, nVIDIA GeForce GT 325M GPU, and nVIDIA Optimus technology. I am running OpenSUSE 11.4 64 bit with GNOME. I used to be a former Ubuntu user. I used Ubuntu 10.10 Maverick Meerkat 64 bit. In Ubuntu, it was not recommended that I install the proprietary nVIDIA binary drivers because it would cause me to log into a TTY console upon reboot.
nVIDIA states that they have no plans to support Optimus technology in Linux at any time. Would it be recommended that I install the proprietary nVIDIA binary drivers in OpenSUSE 11.4 64 bit with GNOME? Will I get the same problem as in Ubuntu? How do I do this?
View 1 Replies
View Related
Jun 6, 2010
I am running Debian "Sid" and cannot install the Nvidia driver. When I try to install the driver using Module Assistant it says "Bad luck, the kernel headers for the target kernel version could not be found and you did not specify other valid kernel headers to use." It also says "If the running kernel has been shipped with Debian please install the package linux-headers-2.6.32-trunk-amd64." The kernel I am running is the one currently in Debian "Sid".
View 8 Replies
View Related
Apr 20, 2010
telling me if this behavior of my openSuSE 11.2 installation is normal? I use a 64-Bit openSuSE 11.2 with kernel 2.6.31.x with root partition ext4. After adding and updating from repository kernel:/HEAD/etc to 2.6.34-rc4 I can not boot anymore due to a lack of module ext4. I thought today ext4 is stable and fix built-in in the actual kernel releases, isn't it? The error message at boot time: FATAL: Module ext4 not found. Which is right because in /lib/modules/<kernelversion>/kernel/ there is NO 'fs' subfolder. Isn't the kernel:/HEAD/ repository the official update path to get a newer major kernel? (besides openSuSE's Updates for security reasons) Do you know how I can fix it without self-compiling?
View 5 Replies
View Related
Jan 14, 2010
im having an intel E2180 processor with 2 gb RAM and an nvidia 8400gs graphics card. Lately i installed Fedora 12 on my system and found that with default settings the desktop 3d is not working. so installed the kmod-nvidia using yum after following the instruction.i also edited the grub.conf file to rdblacklist=nouveau to blacklist nouveau drivers.
Then once i rebooted i found two kernels in grub ie the old one and the one with PAE extension. when i booted into the old kernel its Xwindows failed to load showing a black screen and when i tried the new PAE kernel it booted in 640 x 480 resolution. {earlier i was getting a resolution of 1440 x 900 on my 17" widescreen monitor}. it also showed that the nvidia drivers failed to load. I also read in some forums that the PAE kernels are for systems with 4gb+ of ram. So i thought it better to reinstall the whole thing.
then i reinstalled the whole operating system using my fedora 12 dvd and performed the 'upgrade or replace the existing linux distribution'. interestingly now my older kernel has disappeared and the PAE kernel is the one that is remaining.
[Code]...
View 1 Replies
View Related
May 11, 2011
I'm trying to install a patch but when I copy it into terminal I get message " /home/john/patch-modules_v62-opensuse.sh 'vmware-7.1.3-2.6.37-rc5.patch' not found. copy it to the current '/home/john' directory. Exiting" But I have it in my home directory!
View 3 Replies
View Related
May 15, 2010
I can run Ubuntu 10.04 just fine as long as I have my hardware drivers disabled, but when I enable my hardware drivers I get an error before the GDM login screen that says something to the effect of it being unable to load the NVIDIA KernelI'm then given the choice of booting into low-graphics mode, configuring xorg for this hardware, troubleshooting, dropping to console, or restarting X.Booting to low-graphics mode does nothing useful, just boots to low gfx mode.Configuring xorg for this hardware does nothing at all - same errors after trying every single option in the configuring xorg sectionTroubleshooting is equally useless to me - I can't copy and paste the very-long error reports, I'm not an xorg pro so editing the xorg conf doesn't help me, and when I tried following the option to export all my config and error logs, it said that it has exported it to $xorg_backup_file - but that's just a variable not a file.. after a reboot I can't find this anywhere.
I've googled this and the only useful info I've found is to run nvidia-xconfig as root, which I've done and it has zero effect.The only temporary solution is to disable the nvidia driver, which lets me boot normally using metacity at full resolution, but has no accelerated 3d or composite overlay so I'm unable to run compiz or have any nifty 3d.Details: Vid card: NVIDIA G96 (according to lspci) Driver: NVIDIA accelerated graphics driver (version current) [Recommended] OS: Ubuntu 10.04
View 9 Replies
View Related
Oct 13, 2010
I need to install mainline kernel to make my notebook working and I have downloaded the kernel and patches from this link url
The kernel is in deb format so that is no problem on installing. But how to apply the patches? I need assistance because this is my first time meet kernel patch.
View 9 Replies
View Related
Jul 16, 2010
I would like to install above mentioned driver. I need to prepare kernel for this instalation, but this information I didnt find on openSUSE pages. I add openSUSE 11.3 KDE
View 9 Replies
View Related
Jun 18, 2011
In order to configure a dual display in a fresh 11.4 installation, I am attempting to install the nVidia driver according to the instructions in SDB:NVIDIA the hard way - openSUSE. I have not previously compiled or configured a kernel so I largely followed the instructions from OpenSUSE 11.2 - How to compile a Kernel for Newbies.The currently installed kernel is 2.6.37.1-1.2-desktop. The graphics card is an ASUS EN9600GSO (512MB).
In Yast, I installed gcc, make, kernel-devel (v. 2.6.37.1-1.2) and kernel-desktop-devel (v. 2.6.37.1-1.2). Per the "hard way" instructions, I did not install kernel-source.
View 9 Replies
View Related
Sep 11, 2010
is there a way to remove a patch from a kernel?
I need to apply a squashfs-lzma patch (squashfs 4.1cvs) to the liquorix kernel source which is already patched with squashfs 4.0.
how would I do that?I tried googling got this. url
but I dont know the command used to apply the patch the patch is called
35.4-3.patch.gz
url
but that patch includes more than squashfs,etc
View 1 Replies
View Related
Jun 27, 2011
When trying to install the nvidia graphics driver I get the following error-message:
ERROR: The kernel header file '/usr/src/linux/include/linux/version.h' does not exist. The most likely reason for this is that the kernel source files in '/usr/src/linux' have not been configured. How do I configure the kernel source files?
View 3 Replies
View Related
Apr 18, 2010
I have a server running ESXi. I want to know if it supports AMD-V for hardware-based virtualization. Is there any way to check it from one of the guest os running (centos 5).
Also, I tried rebooting the box and I can't see an option in the bios to turn on/off Virtualization. Although from Asus site they say it supports is:
[URL]
The motherboard is an ASUS KFN4-DRE and has 2 Dual Opteron 2216 2.4GHz processors.
Also, on a side note, I have another box with HDAMA board and 2 Dual Opteron 275s. Do these support AMD-V as well? No option in bios as well.
View 3 Replies
View Related
Apr 11, 2010
After a PSU and motherboard failure, I'm about to spec out a new PC. The last time I looked, Nvidia was the preferred graphics chipset as they tended to support Linux better than ATI. Is this still the case?[url].... seem to have lots of ATI cards in stock but hardly any Nvidia (despite offering a similar sized range), but I don't want to get an ATI card if it's not preferred for technological reasons (or even FOSS ethical reasons!).
View 9 Replies
View Related
Jun 6, 2010
After having some trouble with Intel graphics I decided to pick up a PCI Nvidia graphics card. Now I am wondering what driver to use. Is the open source drive good enough to use or should I install the Nvidia driver? I know that things are generally easier with the default driver, especially for support on older cards, but I would like to get the best performance I can. This is for my Dad's computer, so he won't be playing any games, but if it will help with 2D and video that would be great.
The card is an Geforce FX5200 fanless card, I've heard they are well supported in Linux.The computer is a P4 Dell 3000 with Ubuntu desktop 10.04 32bit.
View 2 Replies
View Related
Oct 3, 2010
I am having problems installing the graphics driver (from the Nvidia website) for my Nvidia Vanta card on Ubuntu 10.04. I disabled X via terminal and then I ran a Virtual Console. With the virtual console I ran the chmod command and the went through the installation. It did bring up a message with something about my distro not having a pre-configured script (or something like that) and asked me if I would like to continue anyway. I choose Yes and the installation failed.
View 2 Replies
View Related
Oct 4, 2010
I cannot get my driver to work in 10.04 LTS. I've googled all around and still can't fix this. Randomly when I boot up it says ubuntu is running in low graphics mode. It was working yesterday. I had this problem before and it just randomly fixed its self. I have an Nvidia 320m graphics card with drivers from the hardware drivers program.
Heres my xorg.conf file ...
Code:
Section "Screen"
Identifier"Default Screen"
DefaultDepth24
EndSection
Section "Module"
Load"glx"
EndSection
Section "Device"
Identifier"Default Device"
Driver"nvidia"
Option"NoLogo""True"
EndSection
View 6 Replies
View Related
Nov 8, 2010
Would a Nvidia Geforce 4 graphics card be supported for openSUSE? My friend gave me it, and said that it was. But he doesnt use Linux.
View 4 Replies
View Related
Jun 19, 2011
I have a problem with starting ubuntu 10.10, I changed my graphics card from an ATI card to a Nivida card a week or so ago (Machine has dual boot). I've sort out the windows install, but cant get into ubuntu to update the drivers. It boots as far as console but just leaves me with the text screen. How do I update the drivers from there or get a basic console screen to come up so I can update?
View 1 Replies
View Related
Jul 16, 2010
I have a Intel server board machine that has a on board Matrox cardWith 11.2 the install barfs to text mode configuring the card during install butonce you log in a root and run sax2 it is OK once the machine restartsWith 11.3 it installs ( apparently ) perfectly then just goes to a blackscreen .. the usb keyboard is dead and that is that
View 3 Replies
View Related
Jan 8, 2011
I have a system with two nVidia graphics cards, with monitors connected to each graphics card. I used nvidia-settings to setup a X server for each graphics card. Rebooted with saved xorg.conf file. I do see all monitors displaying their correct image. I am using Gnome 2 supplied with 11.3. The problem is: how do I start applications on the 2nd X server? If I use the application launcher on 2nd X server, the applications appear on the monitors of the 1st X server. I am also unable to move applications windows from one X server to the other.
View 1 Replies
View Related
Sep 10, 2011
i just upgraded my pc to 12.1 milestone 5 when i went to play my fav game (Xonotic) it was all laggy at 1 fps. I realised the graphics card app wasnt working anymore.Can any 1 fix PS and i had to go on failsafe too. PS2 milestone 5 workes flawlessly apart from the gnome 3 bug at startup
View 2 Replies
View Related
May 25, 2010
I have a PCI graphics card, Nvidia Geforce FX 5500, but can't get it to work. I have 10.04 installed on a Dell Dimension 3000, P4, 1Gb RAM, integrated graphics. I installed 10.04 without the card in the machine, then shut down and plugged the card in and booted it up again (BIOS setting is 'onboard' for integrated graphics, 8Mb; only other option is 'auto'). Checking the hardware drivers I can see the recommended Nvidia drivers (v173, not yet activated) and lspci gives me the integrated as well as the Nvidia listing:
01:02.0 VGA compatible controller: Nvidia Corporation NV34 [GeForce FX 5500] (rev a1)
00:02.0 VGA compatible controller: Intel Corporation 8286G Integrated Graphics Controller (rev 02)
So far so good, but that's where it ends. Changing the BIOS setting to 'auto' turns the screen off on reboot, both for the monitor connected to the VGA port of the Nvidia card and for the monitor connected to the VGA port of the motherboard. I have to shutdown, take the card out and set the BIOS back to 'onboard' to be able to boot again (and shutdown, plug the card back in and boot up again to get back to where I was).
Activating the recommended hardware driver and rebooting (still with BIOS set to onboard) gives a blank screen (screen is still on and there may have been a flash of the purple screen with the ubuntu logo); nothing else happens no matter how long I wait. Rebooting doesn't help, it turns off the screen; same result for booting in recovery mode. I can get to the GRUB bootloader and when I replace 'quiet splash' with 'nomodeset' I manage to boot again with the monitor connected to the VGA port of the motherboard, but am not anywhere closer to getting my monitor working on the Nvidea card.
View 5 Replies
View Related
