When I go to System>Administration>Hardware Drivers a new window pops up (no proprietary drivers are in use for this system). I click on version 177 and activate, but all that happens is a smaller window comes up (downloading and installing driver) although it never goes over 0% and then quickly disappears without any "changes applied" message.
View 9 RepliesSo I have been trying to install these drivers forever and after going through a million forum posts and Google searches I have been unsuccessful. The process I have been trying starts as such: I hit ctrl-alt-f1 and then login as root. i then change to run level 3 by doing /sbin/init 3. After that's done I cd to desktop and do sh NVIDIA-LINUX-x86-185.18.29-pkg1.run --kernel-source-path /usr/src/kernel/2.6.18-128.2.1.el15-i686
If I don't give it the source path it can't find the source tree. Eventually I get the error: ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from
[Code]...
I have just installed Kubuntu 9.10 in my laptop and it did not ditected my Nvidia 8400 M GS graphics Card I downloaded a driver file
NVIDIA-Linux.x86-19042-pkg1.run to install drivers but when i run it it shows the error error:you appear to be running X server, please exit X before installing.
I have been using ubuntu for quite a long time, and for the first time, I am now unable to set nvidia drivers to work. I have just install ubuntu 9.10 amd64 on an AMD 64 athlong X2 with a GEForce 6500 nvidia card.
The only reason I need the proprietary drivers is to use two monitors.
I am going crazy, I have tested everything I have found on the web. I have tried all the nvidia drivers version, I have tried envyng, ... but nvidia do not work!!
I am trying Xinerama with nv, but it does not work either!!!
Here is my xorg.conf file in which I have tried to use nv driver to set dual monitor. X fails to load and it says that screen 0 is deleted, that devices are found but there are no matches in the config file. Any clue?
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
[Code]....
I can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal
1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..
2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"
3.) Stuck don't know what to do.
[URL] I just updated and then saw this news , whats the solution for me, I either want to go beta or downgrade, If i try to boot to previous kernel, boot hangs in graphic mode, I cant start X and gdm . How to install kmod with beta drivers? Or whats the solution, nvidia ver: 195.36.08
[Code]....
I have Ubuntu 10.10. I want to install the from the nvidia website. The propriatary drivers from Ubuntu aren't great. I have downloaded the file, but what do I do with it now? How can I get it installed?
View 5 Replies View RelatedSince 2 weeks now i decide to roll back to my favorite Ubuntu OS.Of course i kept the windows for my creative suite of Adobe that i am working on.So, i downloaded and installed Ubuntu 10.04 LTS and everything went ok.(Even the dual boot with grub).Then i tried to install latest nVidia drivers and after reboot the max.res. i have is 640X480X60Hz. My composition is Intel P4 2.8 --- Gigabyte PE8100 --- GeForce 5700 FX The monitor is Philips CW220 22". I tried many of the guides of Ubuntu forums and some of them made my system unfunctional and some other had no result.
View 1 Replies View RelatedThis is my first post, as I've finally become fed up with trying to get the nvidia drivers installed on Fedora 10. I've read through all the posts here about how people have had problems. I know about the rpmfusion repository, and have followed leigh123's instructions to the letter at this link:[URL]The exact stepsI have taken before following his sage advice follows this way: install off the CD image I burned of Fedora 10, run from the menus "System-->Administration-->Update System" to get the system up to date, reboot to make sure everything is working fine.
Then I follow the above instructions (only because they have gotten me the closest to getting the drivers working). After the reboot from following those instructions, the system starts up, and I have a desktop. But when I restart again, either because I'm shutting down for the night, or just to check again that everything is fine,I get nothing but a flashing cursor in the upper left of my screen. I'm able to CTRL+ALT+F2 and get to a login that way, but can't get into the GUI. I've searched the forums (both here and on The Web generally), and can't find a fix for this that works for me. I have gone back and erased the partition and reinstalled, so I'm at the basic install with all the updates for my system, and needing help with getting the drivers installed and working.
Just to give a run down of what I have on my system:Two NVidia 8500 GT cards connected with the SLI bridgeAMD Athlon 64 X2 Dual Core 3800+Runningl 2.6.27.12-170.2.5.fc10.x86_64 (I'm typing this up as I reinstall updates as I listed above).Before anyone starts giving suggestions, please make sure to give the full instructions, as I'm new to Fedora/Linux. And if there is anything else you wish to know about my configuration
I have, for days, been trying to get a Fedora 15 server to send audio output to the system monitor, an ASUS VH242H, via HDMI. The video portion works perfectly, allowing me to appreciate GNOME 3 for the first time. Sound, on the other hand, is non-existent.
From many, many threads on this problem, I have at least been able to provide some info which might help resolve this. Unfortunately, I have now read too much and followed too many suggestions to be able to find my way through the morass. So, once again, I built a completely new system to ensure a clean start.
Note also that to simplify things, I disabled the on-board audio in BIOS so only Nvidia has any sound output capability. Initially, 'alsamixer -V all' identifies the card and the chip as being PulseAudio. That would change if I used the <F6> option but I have not done so to keep things 'clean' at this point. The 'Master' is full on (100<>100), so muting is not a problem. Next, I searched for the device from the output of /proc/asound/card0 which would match the monitor.
The one device associated with the monitor_name is eld#3.0:
monitor_present 1
eld_valid 1
monitor_name ASUS VH242H
[code]...
Both the kernel driver and the kernel modules are not what I think I should have. The kernel driver should be HDA NVidia for starters, no? Running modprobe -l and looking for nvidia returns:
'kernel/drivers /video/nvidia/nvidiafb.ko'and 'extra/nvidia/nvidia.ko' But I have not attempted anything beyond this point because I am just too confused as to what needs to be done and who or what manages these values effectively.
I have a desktop installation of Ubuntu 8.10 which has somehow lost parts of it's nvidia drivers. Is there some way, short of reinstalling Ubuntu, that I can completely remove the dregs of my nvidia installation, and then re-install it all afresh ?
View 9 Replies View Relatedteh current version according to Hardware Drivers is 195.36.24 the current one on nvidia's site is 256.53 if there is a way to sue the package manager to get it that would be preferable I know how to install their run files they have
View 5 Replies View RelatedI've got Ubuntu 10.10 and a nVidia 8400GS but when I try to install the newest drivers I get the following error:
ERROR: You appear to be running an X server; please exit X before installing.
I did alot of reading on installing nVIDIA Drivers So far, I did it through the Package Manager. But I got the older 260.* drivers. I downloaded the main drivers from nVIDIA Page. Ran the RUN file. I'm running an Giada PC with ION 9400 IGP. What do you people recommend the best way to install? Custom build? Which I don't know how to. I tried to get vdapu installed as well. But I still get Undefined Rendering in Flash Player. And Boxee plays videos cropped on the left hand side. Right now I have 270.40.16 drivers installed.
View 8 Replies View RelatedJust installed Ubuntu 10.04 on my desktop, inserted a nVIDIA cd in order to install the nVIDIA control panel plus drivers, a CD icon appears on the screen but nothing happens, I have right-clicked the icon and selected open but it show me just a folder with 'bin', autorun.exe' etc. and the cd wont start. Same for other cds.
View 9 Replies View Relatedi am totally new to linux and ubuntu (10.10 is the first release i have used) I have successfully managed to create a persistent ubuntu 10.10 bootable usb drive. I really want to enable the advanced 3d effects that ubuntu offers but I'm having trouble installing the drivers for my geforce 6600LE on the persistent usb.
I attempted an install from the Appearance window, the package failed to install after downloading. So i used the following commands someone posted:
[Code]...
I just installed 11.04 and I knew I would have to install the NVidia video drivers. So it was no surprise when it popped up a warning and dropped me into Gnome Classic view. So I turned on the NVidia drivers and rebooted. In my desktop selection menu on the login screen I have "Ubuntu" and "Ubuntu Classic".
Unfortunately they look exactly alike, with the Gnome panel along the top, and the panel with the taskbar, desktops and recylce bin on the bottom. I've gone back-and-forth a few times and nothing has changed. Some changes in one environment is not set in the other, like they really are 2 different environments.
According to the Software Center, Unity (not Unity 2D) *is* installed.So how can I boot into the Unity desktop?
I am trying out Debian 6 and was wondering how I install the Nvidia drivers. In Ubuntu, I just had to launch Hardware Drivers and install the drivers from there. Is Debian a harder distro to use than Ubuntu? Like I said, I am trying it out. I have a tendency to explore the different Linux distros hopefully finding one that is drop dead easy to use and maintain.
View 3 Replies View RelatedI want to install the nvidia drivers for Kubuntu 9.04 I know I can run the drivers from Nvidia, but does Kubuntu have its own drivers.
View 6 Replies View RelatedAnytime i reboot or shutdown linux i get an error saying it cant find my drivers or somthing before x starts... i tell it to shutdown to terminal rerun drivers and everything works untill i reboot again <.< for now i just been keeping my computer on but i would rather figure this out... i have searched high and low and finnaly have given up trying to get it to work with just using google research...
View 9 Replies View RelatedHow I install the Nvidia 180.51 drivers for Ubuntu?
View 3 Replies View RelatedI installed Debian 8 on my new computer 3 days ago. Everything went fine, until I tried to install the nvidia non free drivers version 352.21 (for a GTX 970M).I read a lot about that, figuring out I had to add the experimental repo. Here's my sources.list for reference :
Code: Select all# deb cdrom:[Debian GNU/Linux 8.1.0 _Jessie_ - Official amd64 DVD Binary-1 20150606-14:19]/ jessie contrib main
# deb cdrom:[Debian GNU/Linux 8.1.0 _Jessie_ - Official amd64 DVD Binary-1 20150606-14:19]/ jessie main contrib
deb http://ftp.fr.debian.org/debian/ jessie main non-free contrib
deb-src http://ftp.fr.debian.org/debian/ jessie main non-free contrib
[code]....
E: Unable to correct problems, you have held broken packages."but it is not going to be installed" ?I searched on various search engine for this issue with no revelant result..
when i try to install the nvidia drivers with 'yum install kmod-nvidia' its worked before, but now i get this (look at the bottom for where it goes wrong)
[root@localhost Tom]# yum install kmod-nvidia
Loaded plugins: langpacks, presto, refresh-packagekit
Adding en_US to language list
Setting up Install Process
Resolving Dependencies
[Code].....
10.04 64-bit
+
NVIDIA GeForce 8500GT 256MB
So I kind of had ubuntu working, but then I tried updating to the newer nvidia drivers and I broke it. I had to uninstall/purge nvidia so as to get ubuntu past the black screen/no signal to monitor...
I had been using a "Broadcom B43 wireless driver" which used fwcutter to extract firmware from various source files. I have never been able to get this install working with nvidia drivers and am about ready to try anything (including yet another reinstall).
**Nvidia drivers 96, 173, & current cause my system to freeze, lock up, reboot, fail to boot, etc. You name it and it's happened.**
I tried using synaptic, jockey and the terminal to install nvidia drivers. Then I tried adding the swat ppa and installing through System-Admin-Hardware Drivers to no avail.
Every time I start my PC it displays this window.
And when I open Hardware drivers this is what appears.
Being a total beginner to linux, I can't seem to find a decent guide on how to install these drivers without much hassle, even though I've been searching for almost couple of hours now.
First, my system specs, taken with Hard Info
Processor: 2x AMD Athlon(tm) II X2 240 Processor
Memory: 3091MB (1865MB used)
Operating System: Ubuntu 10.04.1 LTS
-Display-
Resolution: 1360x768 pixels
OpenGL Renderer: GeForce GT 220/PCI/SSE2
X11 Vendor: The X.Org Foundation
-Multimedia-
Audio Adapter: HDA-Intel - HDA NVidia
Audio Adapter: HDA-Intel - HDA NVidia
-SCSI Disks-
HL-DT-ST DVDRAM GH22NS50
Now, I've installed the "default" (dunno if that would be the correct categorizing) driver with the "Hardware drivers" utility from System->Preferences->Hardware drivers because I've failed numerous times trying to install the package from nVidia site ; I would always get an error while trying to run the package :
"It seems that X server is running on your linux, please deactivate it to install this package" or something like that, but I'm sure it was about X running.
I'm running the latest Xubuntu and can't seem to kill the xserver to install the nvidia dev drivers. where I could find the program to kill the server? I tried Top and it kept coming back!
View 1 Replies View Relatedhow to install Nvidia drivers without losing my menu.Slightly more specifically: When I go to install the drivers for my graphics card (Nvidia 7300 SE/ 7200 GS) under the 'Additional Drivers' menu in Administration, it does everything fine, wants to restart, and when it does, I have no menu, no bottom bar, nothing. The only thing on my screen is my wallpaper. (I'm using the gnome set-up, not Unity) For whatever reason, my Linksys adapter stopped working with Windows7. I dunno why, I tried everything, it's just not working. Yet when I boot into Ubuntu 11.04 x64 it works perfectly. HOW ON EARTH a Linksys device is working better out of the box on Linux than it does on Windows is profoundly beyond my level of understanding, but no complaints. Once I found out that Ubuntu can actually run World of Warcraft better than Windows, given the right adjustments.I removed Windows from my hard-drive post haste.I've gotten WoW to run on Ubuntu now, but it runs horribly, like 1fps. Added the OpenGL text to the config.wtf file, and it got only very slightly less horrible, but I'd like to assume that having an actual driver for my graphics card would make the game playable.
View 9 Replies View RelatedThis is probably very simple but can someone tell me how I stop Unity in order to install graphics drivers?
View 2 Replies View RelatedI looking for a new disto been using ubuntu. my friend recommended Debian, I just installed it and made it unusable very quickly by trying to use repositories for ubuntu. I'd like to know if there is an easy way to make my wireless work like in ubuntu it just does, (i don't even need to attach a cat 5 cable after install), and I'm happy in my blissful ignorance. Also an easy way to install nvidia drivers?
I need Broadcom and nivida 173 drivers. I looked through the Debian forums while I had a working system but found nothing easily and iceweavel was so slow, unless there was something wrong with my wired connection. Is there an easy way to install no free drivers?
I am a real Linux noob lol XD. So sorry if this questions seems a bit easy for some. So here it goes: I want to install NVidia drivers for my laptop and need a compiler to actually install them. I do not have any installed and would like to know how to install gcc, as in the error when i run NVidia driver it says that I need it.
View 9 Replies View Related