Ubuntu :: NVIDIA: Failed To Initialize The Nvidia Graphics Device Pci:0:13:0 - Fatal Screen Error: No Screen Found

Jan 3, 2011

when i start uubuntu it automatically goes to tty with out letting me login. then when i press startx it says:

NVIDIA: failed to initialize the nvidia graphics device pci:0:13:0
nvidia: please check your systems kernal log for additional erroe
nvidia: messages and refer to chapter 8
nvidia: failed to initialize the nvidia graphics device!
nvidia: screen found, but none have a usable configuration
fatal screen error: no screen found

right before this i had activated a nvidia graphics device

View 9 Replies


ADVERTISEMENT

Debian Configuration :: FATAL: Error Inserting Nvidia (/lib/modules/2.6.26-2-686/nvidia/nvidia.ko): No Such Device

Mar 15, 2010

I'm trying to install the nvidia drivers but it is not working.

lspci | grep VGA

02:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX - nForce GPU] (rev a3)

My xorg.conf looks like this:

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.

[code]...

And after that my X is not working. And when i try sudo modprobe nvidia I get this:

FATAL: Error inserting nvidia (/lib/modules/2.6.26-2-686/nvidia/nvidia.ko): No such device

View 2 Replies View Related

Slackware :: Failed To Initialize NVIDIA Graphics Device On Startx With Slackware 13.1

Aug 24, 2010

I installed slackware 13.1 x86_64 bit with multilib, and its been about a month already, I'm really enjoying slackware but I am being troubled with my nvidia card, and I need to get my 3D acceleration working. And I've been looking around the net for information and kept on trying to make my nvidia card to work but to no avail. I cant get X to start, once I put in a xorg.conf stating to use the nvidia card. After troubleshooting for almost 2 weeks and now at my wits end, I now come humbly looking for help in linuxquestions slackware community forum.I've installed nvidia 64 bit kernel, drivers from slackbuilds (version 256.44). The laptop model I'm trying to get it working is an -ASUS K52J Intel Core i3 2.40Ghz with 2GB RAM and with an Nvidia Geforce 310M with 1GB dedicated VRAM.

View 14 Replies View Related

Fedora :: (EE) Jul 30 06:32:07 NVIDIA(0): Failed To Initialize The NVIDIA Kernel Module

Jul 30, 2010

I updated kernel and everything seemed ok, except HD-PVR is locking up and recording only two minutes of every show it records. So, I have gone back to my previous kernel, but it seems that X isn't starting:

Code:

(II) NVIDIA dlloader X Driver 195.36.31 Thu Jun 3 08:27:29 PDT 2010
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs

[code]....

Fatal server error:no screens found I had done a yum install kmod-nvidia for the newer kernel. I am thinking I need to get the kmod for the current kernel again (2.6.32.12-115.fc12.x86_64 #1 SMP Fri Apr 30 19:46:25 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux), but am not sure how that is done?

View 2 Replies View Related

Ubuntu / Apple :: Error - Failed To Initialize The NVIDIA Kernel Module

May 1, 2010

I keep getting a warning messaged almost every time I reboot about Ubuntu running in low-graphics mode on a Macbook 5,1. This has been happening since Lucid Beta 1.

Quote:

Failed to initialize the NVIDIA kernel module. Please see the
system's kernel log for additional error messages and
consult the NVIDIA README for details.

[code]....

After I finish loading in low graphics mode I have to run "sudo nvidia-xconfig". Then, the next reboot the graphics card driver is loaded properly. Is anyone else experiencing this problem or have an idea how to correct it? I know it is a long shot, but do you think doing a fresh install of the stable release would work?

View 3 Replies View Related

Ubuntu Installation :: With NVIDIA 310M Graphics Card Drivers (310M) On A Dell Vostro 3300 - Errors "no Device Found - No Screens Found"

Oct 28, 2010

I have a Dell Vostro 3300, i5 460 processor with a NVIDIA 310M Graphics Card. I'm doing a KUBUNTU 10.10 (Maverick) install with the following results. The Live CD boots just fine to, "TEST," or "Install." Installation goes fine. However, the graphics card being used is the Intel i915. I have tried installing the NVIDIA drivers directly from the, "Additional Drivers," tool and after the reboot I get through the boot screen to the console. I try to manually startx and I get the errors, "no device found," "no screens found." The second install I tried purging and blacklisting the nouveau drivers and entering safe mode. Then using apt-get install nvidia-current. After that, nvidia-xconfig. Same results.

The third attempt I re-installed and this time downloaded the drivers from the Nvidia site (version 256.53). Blacklisted nouveau, remove all nvidia, updated initramfs, etc. The install went fine however I still end up at a console after boot with the same messages as above. No device found, no screens found. I've tried searching through the forum and web and have tried things like adding the modset option along with many other hacks, tips and fixes. still, no go.I can live with the Intel graphics for now although I lose 512MB of memory. Unfortunately there is no way to disable or change this set-up in the BIOS. I've seen quite a few bug reports at Launchpad:

1. Is this something I should just wait til a fix comes? Will a fix come?
2. Is there, or will there be an official Updated Ubuntu Guide for Maverick to install NVIDIA drivers with this tecnology?
3. Lastly, is there anything else I should try??

View 9 Replies View Related

Fedora Installation :: Nvidia Graphics Driver - Error: GlXCreateContext Failed

May 8, 2009

I am using fedora10 in my notebook. I installed nvidia-graphics driver as follows.

su -c 'rpm -ivh http://download1.rpmfusion.org/free/...ble.noarch.rpm'
su -c 'rpm -ivh http://download1.rpmfusion.org/nonfr...ble.noarch.rpm'
su -c 'rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-rpmfusion-*'

Then i installed kmod-nvidia with yum su -c 'yum install kmod-nvidia' When i tried to open NVIDIA control panel, i got a message that nvidia-driver should be configured. Then i issued the following command as root.
nvidia-xconfig. The i rebooted the system. Now in the boot menu, i see two kernel informations as follows

Fedora (2.6.27.21-170.2.56.fc10.i686)
Fedora (2.6.27.5-117.fc10.i686.PAE)

If i boot my linux with first one, x windows starts, if i boot with the second one (previously default), the x-windows is not opening. Why this happens? So i booted my system with first option in the boot menu. The system booted and x.windows started but i am not able to use any software that uses opengl window. The glxinfo command gives me the following error.

[Code]....

View 3 Replies View Related

Fedora Hardware :: Lenovo B560 (Optimus, Nvidia 310M) / "Screen Not Found" Error?

Jan 28, 2011

I am running Fedora 14 on a Lenovo B560 laptop.This laptop has a hardware peculiarity, namely Nvidia's newest gag: Optimus.This laptop has two graphics cards: an Intel GMA HD (for 2D) and a Nvidia 310 M (for 3D). The Optimus technology automatically activates the graphics card required for the current task.

Now, Optimus on linux is so far officially unsupported by Nvidia.

At the moment, my Fedora runs on the Intel GMA. I personally don't care if Optimus doesn't run on linux if I can somehow manually (even solely) use the Nvidia 310M graphics card.

So far, all my manual attempts in xorg.conf to speak to this card fail with the X not starting and the well-known "Screen not found" error.

Does anyone have any experience with this or ideas how to activate the Nvidia card?

View 5 Replies View Related

Ubuntu :: 10.04 Keep Getting 'Failed To Initialize NVIDIA Kernel Module'

Oct 3, 2010

Every time I start up my Ubuntu 10.04 install, instead of the graphical login screen, I get an error dialog stating the following:

Code:
Ubuntu is running in low-graphics mode. The following error was encountered. You may need to update your configuration to solve this.
Also in the dialog are several lines of text:

Code:
(EE) <date and time> Failed to initialize the NVIDIA kernel module. Please see the system's kernel log for additional error messages and consult the NVIDIA README for details. ***Aborting*** Screen(s) found, but none have a usable configuration.I'm not sure what it means by "kernel log," or where any error logs might be saved. Any tips? Perhaps if I can find such error logs, posting them will help diagnose the problem.

If it matters, I have 2 monitors, an NEC AccuSync 120 CRT and a Samsung BX2440X LCD. I use them in Xinerama mode with the Nvidia drivers under my Ubuntu 9.10 install and have no problems there. To get normal graphics under 10.04, I have to start up in low-graphics mode, kill X server, reinstall the Nvidia proprietary drivers, and restart the X server. Then I have to do it all over again after the next restart, every time I want to run 10.04.It's very annoying.Also possibly relevant: I use the latest 32-bit Nvidia drivers for 10.04, version 256.53.I've found a few other threads where people had problems similar to this, but nothing exactly like my situation nor any real resolution so far. I hope it can be fixed, because there are other things about 10.04 that I really like.

View 4 Replies View Related

Ubuntu Multimedia :: Display A Full Screen With An Nvidia Integrated Graphics Controller

Nov 5, 2010

I have recently upgraded to Ubuntu 10.10. However the bottom of the screen is cut off with only a trace of it visible. I had similar problems with version 10.04 where both and top and bottom of the screen were not displayed.

I have noticed that version 10.10 does not use the proprietry driver the previous versions used.

In desparation I have tried Kubuntu but the results are still much the same.

Does anyone have any idea how I can display a full screen with an Nvidia integrated graphics controller.

View 9 Replies View Related

OpenSUSE Hardware :: Failed To Initialize The Second NVIDIA GPU In 11.4

May 5, 2011

I have 2 NVIDIA card intalled - GT 240 and Geforce 9500.After updating by repo kernel to ver 2.6.37.6-0.5.1 and Nvidia driver by to ver 270.41.06 X server cant start

Part of X server log
347.737] (EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA GPU at PCI:2:0:0. Please
[ 347.737] (EE) NVIDIA(GPU-1): check your system's kernel log for additional error
[ 347.737] (EE) NVIDIA(GPU-1): messages and refer to Chapter 8: Common Problems in the

[code]....

So for now only dismounting one of cards gives working X server.

View 7 Replies View Related

General :: FATAL Module Nvidia Not Found

Aug 13, 2010

I made some progress trying to get a host that has an Nvidia GeForce 6150 LE and running a liveCD version of Xubuntu 9.10... but "modprobe -i nvidia" returns "FATAL: Module nvidia not found."

View 5 Replies View Related

Ubuntu Multimedia :: 9.10 AMD Crashes: NVIDIA Failed To Initialize The GLX Module?

Mar 25, 2010

I'm running ubuntu 9.10 64 bit (2.6.31-20-generic) on a Z600 HP. My graphics card is Nvidia quadro NVS450. I am using the Ubuntu Nvidia driver 185.18.36. I am experiencing random, daily system freezes where the system has to be manually rebooted. After installing the crash dump packages I am now getting a crash dump file and it's clear the problem relates to my graphics card.

Is this a red herring or the cause of my problems:
(EE) Failed to load /usr/lib/xorg/modules/extensions//libglx.so
(EE) Failed to load module "glx" (loader failed,
(EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X

The NVIDIA X Server Settings shows a message "Failed to query the GLX server vendor".

Here is my xorg.conf file:
$ cat /etc/X11/xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@crested) Sun Feb 1 20:25:37 UTC 2009
Section "ServerLayout"

[Code]...

View 2 Replies View Related

Ubuntu Multimedia :: Failed To Initialize NVIDIA Kernel Module

Aug 17, 2010

I have had this error for way too long. This post will be done in parts. I've had it for months now and I'd like to solve it. Every suggestion on linux forums, ubuntu forums, or some XYZ-linux blog seems to either work for just one boot or none at all. since I have updated my kernel on several occasions, I have also re-installed my NVIDIA kernel module by downloading the run file from NVIDIA's website. It also follows instructions from this post. I have installed the linux header files and the xorg-dev files from repository
I have also tried this.

My hardware (Alienway m17x - VGA compatible controller: nVidia Corporation GT200 [GeForce GTX 260M])

Code:
00:00.0 Host bridge: nVidia Corporation MCP79 Host Bridge (rev b1)
Flags: bus master, 66MHz, fast devsel, latency 0
00:00.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
Flags: bus master, 66MHz, fast devsel, latency 0

[Code].....

View 3 Replies View Related

Ubuntu / Apple :: Macbook 5,1 - Failed To Initialize The Nvidia Kernel Module?

Jun 12, 2010

This problem has bothered me in both my previous install of 10.04 and my current one. Intermittently, booting into ubuntu results in ubuntu running in low-graphics mode, informing me that the Nvidia kernel module has failed to initialize.Running nvidia-xconfig does not help. Removing and then reinstalling the nvidia driver in Hardware drivers does not help. I experience the issue with both the 173 and current drivers.I love ubuntu, but this is making me seriously consider exploring other distros. Perhaps this not a bad thing - after I return from this exploration,

View 1 Replies View Related

Debian Hardware :: Video Card - Failed To Initialize NVidia Kernel Module

Aug 9, 2011

I am trying to get my Debian system running. I have an older Dell Precision 490 with two dual core CPUs. It has 16G Ram, an 150G Intel solid state drive, a 230G data drive, and a 600G backup drive. I have two Samsung monitors attached to the NVIDIA Geforce FX 5xx card. I have been using this machine for several years with Etch, then Lenny, running KDE 3.5. I recently needed to upgrade to Squeeze and KDE4 and have had nothing but problems since. I keep having issues with the video drivers, every time I touch anything the drivers seem to upgrade from the legacy 173 to the current 195.

There have been other library compatibility issues as well (gclib) and the machine has not been stable. This morning the system was running very slowly with X running at 100% (from top) and then the entire system froze. After a hard reboot, X did restart. The Xorg.0.log has the following message:
"Failed to initialize the NVIDIA kernel module! Please ensure that there is a supported NVIDIA GPU in this system, and that the NVIDIA device files have been created properly..."

View 1 Replies View Related

Ubuntu Installation :: Nvidia 9300M GS - Purple Screen (loading Screen) With 4 Dots

Oct 25, 2010

I have been using ubuntu wel a long time now and I know my way around in linux but I recently updated my laptop from ubuntu 10.04 to ubuntu 10.10 all went fine until I had to restart my laptop. I got a purple screen (loading screen) with 4 dots and a oldskool like font which said: Ubuntu 10.10 Right after that the screen goes purple and its like the system halts I hear no login sound etc just a purple screen. So I did a clean install from the 10.10 live cd which booted perfectly fine and the system was also useable like before. But when I installed the system and rebooted it again no problems.

But when I tried to install the proprietary nvidia driver (the recommended one) I got the same problem again the purple screen. After searching a while on the internet I only found posts which had the problem with ATI cards but my laptop is fitted with a Nvidia Geforce 9300 M card. So I tried several things like removing the xorg.conf (read it somewhere) which ofcourse did not work, and booting in graphics fail safe mode which worked. So the point is in 10.04 and 9.10 I CAN use my video card drivers but not in 10.10 is there a solution to this problem? I am talking about the 32 bit version of ubuntu and here's my system hardware profile:

Intel core 2 duo t7350 @ 2,0 ghz / 3mb l2 cache
2 GB DDR3 ram
160 gb hdd
Nvidia 9300m gs
Chipset: I dont know sorry
Model: Samsung R710

View 2 Replies View Related

Ubuntu :: Emachine Nvidia Crash - Screen Locks Up Or Will Distort In Multicolor Stripes Across Screen

Oct 2, 2010

I have an Emachine that my uncle gave me and I thought that Ubuntu would find a nice home in the cozy case and well.....

I have a Emachine el1200-05w AMD Athlon 64 2650e / 1.6 GHz NVIDIA GeForce 6150 SE 2.0 GB mem. and 160GB HDD

I had to fight to get it to install kept freezing and stopping. I finally got it installed. It runs fine and is fast. I like it alot and then after about 5 to 10 min. The screen locks up or will distort in multicolor stripes across the screen. I cant figure out whats going on!

I did just notice that the specs say it's a 64bit possessor and I'm running the 32bit ubuntu will that make a difference?

View 6 Replies View Related

Debian Configuration :: Xserver 2:1.7.7-7 Fatal Error Nvidia.ko?

Oct 19, 2010

I just made the latest safe upgrade on debian squeese and everthing seamed fine untill i made a reboot. i tried starting an xserver after that none was started on boot. {worked fine before}the output below when starting xserverstartx --:3

Xorg-server 2:1.7.7-7
Parse error on line 13 of section files in file /etc/x11/f86config
Igonring obsolete keyword "rgbpath"

[code]....

View 1 Replies View Related

OpenSUSE Hardware :: Error - VLC Failed To Re-initialize Your Sound Output Device

Jul 8, 2010

my sound works when i boot up but as soon as i play a couple of files with VLC video or audio it doesn't matter the sound stops and comes up with an error saying: ALSA version problem:VLC failed to re-initialize your sound output device. Please update alsa-lib to version 1.0.22 or higher to fix this issue.Potential ALSA version problem:VLC failed to initialize your sound output device (if any).Please update alsa-lib to version 1.0.23-2-g8d80d5f or higher to try to fix this issue. I found latest version on net and installed and yast said install fail version already installed my sound device is HDA Intel (ALC C880 Analog)

View 1 Replies View Related

OpenSUSE :: Dual Monitor - Nvidia Driver With X Screen - Shows A Black Screen

Feb 5, 2011

I have openSUSE 11.3 with an nvidia card connected with two monitors. In the past I used xinerama which was ok, but now I need to have two separate desktops, one on each screen. I set the nvidia driver with x screen, and now one screen works perfect and the other only shows a black screen. When I move the mouse over the black screen, the mouse pointer turns into an X, but moves correctly, which seems to me that the problem is that I need to set the second desktop to that screen. I looked on forums on how to do so, and no luck.

View 1 Replies View Related

Ubuntu :: X Fails To Load With Nvidia Driver: "screen(s) Found But None Have A Usable Config"

May 8, 2010

My system is a Lenovo B500 All-In-One, with an Nvidia GTS 250M video card. nv seems to work okay, but I cannot get the desktop to load with the nvidia driver (nvidia-current, from the repository). I've been hacking away at this for a week and a half with no results. Every time I try to boot with the nvidia driver, the splash screen comes up for a second, the screen flashes a couple times between a "static" screen and tty2, then the screen seems to go to a test mode, where it flashes a series of solid colors indefinitely. Looking at /var/log/Xorg.0.log, I see the following:

Code:

(II) May 08 19:06:53 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) May 08 19:06:53 NVIDIA(0): enabled.
(WW) May 08 19:06:54 NVIDIA(0): Failed to enable display hotplug notification

[code]....

View 9 Replies View Related

Ubuntu :: Installing Nvidia 9800gt Graphics Card - Distribution Preinstall Script Failed

Jul 28, 2010

Re: nVidia latest Drivers - im trying to install a 9800gt nvidia graphics card on my ubuuntu i have been reading forums for the last 5 days and still no luck i managed to do a install and it is giving me the following errors distribution pre install script failed install failed /var/log/nvidia-installer.log unable to load kernal module 'nvidia,ko,

View 10 Replies View Related

Ubuntu Installation :: 10.04 To 10.10 - Nvidia 96 With Xorg 1.9 - Nvidia-xconfig: Command Not Found

Jan 24, 2011

i am having a problem with my just recently upgraded ubuntu 10.10 ive search google and forums for well over 4 hours with no luck so im asking here. Now i know nvidia 96 has problems with xorg 1.9 but i installed the updated nvidia 96 driver that supports xorg 1.9 through maverick-proposed and i dont have nvidia control panel under system->preferences and if i types sudo nvidia-settings in terminal i get it says im not running an nvidia driver but the hardware driver reports it as activated but not in use and nvidia settings also tells me to run nvidia-xconfig but it says this when i do sudo: nvidia-xconfig: command not found

View 6 Replies View Related

OpenSUSE Hardware :: NVidia GeForce2 GTS / Pro Driver - Failed To Load Module "nvidia" (loader Failed, 7)

Feb 17, 2010

I`am trying to install drivers for a very old graphics card GeForce2 GTS/Pro on Suse 11.2. I downloaded driver NVIDIA-Linux-x86-71.86.13-pkg1.run and install it successfully. But when I launch "sax2 -r -m 0=nvidia" it crushes with error "isax: could not import file: /var/cache/sax/files/config at /usr/sbin/isax line 199"

[Code]....

View 9 Replies View Related

Ubuntu :: NVIDIA: Failed To Load The NVIDIA Kernel Module?

Aug 31, 2010

I spent quite a lot of time jumping from one thread to another trying to fix a problem with my NVIDIA drivers in Lucid. I was getting the error message on startup: NVIDIA: Failed to load the NVIDIA kernel module ...Failed to load module "nvidia" (module-specific error, 0) No drivers available".

After a lot of trial and error, this is what worked for me (I have updated this thread following [URL]):

- Download the latest NVIDIA driver from www.nvidia.com/page/drivers.html

- In the terminal cd to the directory where you downloaded the driver package (e.g., $ cd Downloads)and make it executable (e.g., $ sudo chmod +x ./NVIDIA-Linux-x86_64-256.53.run)

- Edit blacklist.conf $ gksu gedit /etc/modprobe.d/blacklist.conf

and add the following lines to the end of the file:

#recommended by http://ubuntuforums.org/showthread.php?t=1467074
blacklist vga16fb
blacklist nouveau
blacklist rivafb

[Code].....

View 2 Replies View Related

SUSE :: Installing NVIDIA Graphics Cards Gives Grub Error 13

Oct 27, 2009

So I installed openSUSE 11.1, and got everything from yast2 and then finally got nvidia.ymp or whatever. Bascially, the one click install. When i did that, I couldn't boot into the SUSE GUI. I could boot into the command line but I couldn't start X server.When I did try the Ec2-openSUSE-2.62.27.9 option, I get grub error 13. It says that the ex2fs file system is not supported, only I did not format it with ext2. I am completely stumped and I'm a newbie.

View 3 Replies View Related

Debian Configuration :: Installing Nvidia Graphics Card - Driver Error

Apr 28, 2010

I revived my old desktop (failed psu), and installed debian squeeze using netinst. It has a nvidia geForce 7600GT card. The driver in squeeze does not work very well, so I downloaded nvidia driver-installer. When I run it, it comes back with an error saying the kernel (I assume the nvidia graphics kernel) is compiled with gcc4.3, but the system is using gcc4.4. Using synaptic manager, I installed gcc3.3, but same error.

Next I tried to uninstall gcc4.4 and it gave a warning the system might not be usable. I did not understand it, but I went ahead and uninstalled gcc4.4 and guess what, the system is not usable, and I have to re-install squeeze. Not a big loss, since I do not have much in it. How to install this nvidia driver, specifically, how do I get switch to gcc4.3 from gcc4.3? Also, the squeeze install gave me 2.6.33-trunk-amd64, and 2.6.33-3-amd64. How do I get rid of ...trunk-amd64? Do I just delete it from grub?

View 10 Replies View Related

OpenSUSE Hardware :: 11.1 Nvidia Quadro FX-5000 (190.53) - Fatal Server Error: Caught Signal 11. Server Aborting

Mar 3, 2010

I am having a strange problem with the Opensuse 11.2 Xorg server. Graphics hardware is Nvidia Quadro FX-5000, driver is ver 190.53. 90% of the time, I am getting a seg violation from the Xserver on trying to login via kdm:

[Code]...

...is the error that is present in the "kdm.log" file. So far, it doesn't seem to be user dependent (happens either as root or joe random user,) Again, so far, it only seems to happen with "driver nvidia" enabled in the config file, not with "driver nv" The failure occurs shortly after hitting return on the login screen. After it fails, it starts up a new Xserver, and presents a new login screen. Repeated attempts seem to *eventually* succeed, but 90% of the time, it fails I strongly suspect the Nvidia driver, but I have not been able to find anything documenting any similar problems.

View 1 Replies View Related

Hardware :: Nvidia GeForce 9600gt - Error Message About Running In Low Graphics Mode

Mar 15, 2010

So I've searched across these forums and haven't quite found the same problem I'm having. For the record, I'm running Ubuntu 9.10 So I built my new box, and my video card is a Gigabyte Nvidia GeForce 9600GT (GIGABYTE GV-N96TZL-1GI). I go to System > Administration > Hardware Drivers to install the drivers so I can use those fancy 3D effects. It tells me I need to restart, so I do.

When it comes up though, I get an error message about running in low graphics mode, the top 5th of my screen is blacked out, and the screen has been shifted so that the left boundary is in the middle, and the right boundary goes off the screen and back to the left side. It goes back to working fine (but without the fancy 3D effects) when I remove the drivers. Both drivers in the hardware drivers (185 and 173) have this problem. I'd post log files and such, but I'm at work right now.

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved