I did not find my graphics card in the HCL/Nvidia video cards thread. I looked in YaST for drivers & found none. My desktop pc freezes after the system loads so I cannot use my system. I understand about the level '3' boot option for tty input. How would I download/run the nvidia installer from tty?
View 4 RepliesWould a Nvidia Geforce 4 graphics card be supported for openSUSE? My friend gave me it, and said that it was. But he doesnt use Linux.
View 4 Replies View RelatedAfter installing "nvidia-driver" and "nvidia-kernel" through "sbopkg" I ran "glxinfo | grep -i nvidia" as user (not root) Shows: "Xlib: extension "GLX" missing on display ":0.0". GLUT: Fatal Error in glxinfo: OpenGL GLX extension not supported by display: :0.0" I'm really sure that there is a problem with this or error instead. Or is there any other way of installing nvidia..? "uname -a" "Linux purple 2.6.29.6 #2 SMP Mon Aug 17 11:58:18 CDT 2009 x86_64 Pentium(R) Dual-Core CPU E5300 @ 2.60GHz GenuineIntel GNU/Linux"
Quote:
Linux is not user-friendly. It _is_ user-friendly. It is not ignorant-friendly and idiot-friendly.
I have a problem with a new GeForce 8600GT graphics card. I just installed the card into my Dell Optiplex 745. When I boot the PC I have no image until the Ubuntu logon box comes up. No bios info, no boot menu, no grub menu, nothing until the Ubuntu login. Once I get to the logon prompt everything seems fine except when I use CTRL+ALT+F1 to get to a console. Then I get nothing but a blank screen. When I press CTRL+ALT+F7 my desktop loads fine and all is OK again. I had a problem trying to get the nVidia drivers installed because I didn't have a usable console. I had to use SSH to install the drivers. I'm using this card with an HP 1755 flat panel that's about 5 years old and a Dell Optiplex 745 with Intel Dual-Core CPU.
View 8 Replies View RelatedI already posted this message on another thread but I'd like to start a new thread with it now, and add a few more details. My son and I are having trouble getting the graphics card to work properly in his computer. The resolution is good, but the graphics card is not fully functioning. He works on animation and graphics of several kinds, and the graphics programs cannot run without a fully functioning graphics card.
The computer will not run Blender and other graphics programs. Nor will it even allow for the "normal" "Visual Effects" in the "Appearance Preferences." (It comes up with the error: "Desktop effects could not be enabled," after it tries to find the driver.) The system is:
Graphics Card: nVidia G92, GeForce 8800 GT
System: Ubuntu 9.10 Karmic, 2.6.31-17-generic, 4.4.1 (x86_64-linux-gnu)
Processor: AMD Athlon 64 X2 Dual Core 4200+ (3 Gigs RAM)
We know the graphics card works because it works in Windows. (We set up the computer to boot off of either of two hard drives -- either in Windows XP or Ubuntu 9.10, karmic.) Neither my son nor I understand much of the terminology on your forums, although I have been using Ubuntu for some years and have read quite a bit. (I also have the "Beginning Ubuntu Linux" book.) I love Ubuntu, but sometimes I just cannot figure out how to get some things running. We have tried many different ways of installing the drivers and setting up the xorg.conf file. We have followed the instructions on this and other threads. We also installed NVIDIA-Linux-x86-64-190.53-pkg2.run, as well as 173 and 185. The screen will only work at a proper resolution when we set the "Driver" to "nv" in the xorg.conf file. The screen goes completely blank and dead if we set the "Driver" to "nvidia." Then we need to reboot in safe mode and edit the xorg.conf file with VIM.
[Code]..
How can I find video driver for nvidia geforce 320M graphics card for ubuntu 9.l0?
View 4 Replies View RelatedI changed my old video card for a newer in order to use all the resolution of my screen 1920X1200 and not 1920X1080, in my just installed 11.2, rebooted and got to log in graphic mode,looks good. But isn't. It is working because the new card is seen as the old !How can I get the new one to be recognized, and acces the newresolution ?
View 1 Replies View RelatedThis is to request the communities assistance with the following: As the title suggests, I am attempting to install 10.04.2 LTS on a PC equipped with an ASUS M2NPV-VM mobo and integral NVidia GeForce 6150 chipset/card and AMD dual processors.
Result: While the CD with the installation software loads, the splash screen comes up distorted and is displayed as several black and white horizontal bars. I have tried this with low end monitors with a VGA input with the same results. It appears to me as if though the video driver on the installation CD is not suitable for the mobo's chipset, but I may be wrong.
I have a system with two nVidia graphics cards, with monitors connected to each graphics card. I used nvidia-settings to setup a X server for each graphics card. Rebooted with saved xorg.conf file. I do see all monitors displaying their correct image. I am using Gnome 2 supplied with 11.3. The problem is: how do I start applications on the 2nd X server? If I use the application launcher on 2nd X server, the applications appear on the monitors of the 1st X server. I am also unable to move applications windows from one X server to the other.
View 1 Replies View RelatedI attempted to install restricted drivers using jockey-gtk, was told to reboot and drivers would take effect. Rebooted and got no graphics, after some finagling I was able to delete xorg.conf and I now have horrific looking graphics. Defaulted to current version or 195 (which is also the only option I see in the jockey tool, however in synaptic/apt I see I can install other versions.
View 5 Replies View RelatedInstalled Ubuntu 11.04 but i don't know how to install my nvidia 7200 gs graphics card. in the previous versions (ubuntu 9.10) it installed very easly.. But in Natty 11.04, while i am try to install my driver it fails 2 times and after installation (reboot) ubuntu freezes and not working So reinstalled ubuntu 11.04.
View 3 Replies View RelatedI'm trying to install the drivers for my nvidia graphics card. I downloaded the shell script from the nvidia website. However, there's something peculiar going on. When I execute the shell script it says it cannot find my kernel headers, yet I can verify that my /usr/include/linux/kernel.h does exist. I have selinux on, but just installed os with it on, so contexts are fresh. Checked them as well. After doing some research I found something out. When I run a 'uname -a' I get this.
Code:
Linux ariel 2.6.18-194.el5PAE #1 SMP Fri Apr 2 15:37:44 EDT 2010 i686 i686 i386 GNU/Linux
Yet when I ran 'yum install kernel-devel kernel-headers' they installed the following versions.
Code:
kernel-headers-2.6.18-238.12.1.el5.i386
kernel-devel-2.6.18-238.12.1.el5.i686
Shouldn't they be
[Code]...
I see that the error in the nvidia shell script can't locate the header files for the RUNNING kernel version which makes sense. Why would yum install that version instead of the one in 'uname -a'? Or am I misunderstanding something?
I'm running openSUSE 11.4 with GNOME. I have an EVGA nvidia GTX 285 installed, which is equipped with a variable speed fan. I'm running the nvidia driver package which includes the nvidia X Server Settings utility. The utility allows me to view the fan speed as a percentage of its maximum speed but does not allow adjustment. It appears that the speed remains at the card default of 40% regardless of GPU or card temp. When running certain graphic-intensive applications my card runs quite hot (sometimes >70 degrees C). Although this isn't hot enough to burn the card up in the short term, it is certainly hot enough to shorten my video card's lifespan.
So, the question is how do I set up my system so I can increase the fan speed to 50% or better yet, get it to increase as the GPU temp increases? The nvidia X Server Settings help indicates that fan speed is adjustable after enabling coolbits, but coolbits is not installed on my system and is not available from the default repositories. What is the easiest way to obtain, install and enable coolbits? I have no intention of overclocking my card. It was too expensive to risk damage to the card.
I have the latest everything (kernel, nvidia drivers and kde) and there seems to be a problem in that if I click on the K menu, or grouped windows in the taskbar, or anything in the notification area which causes the computer to freeze for 7 - 12 seconds. Anyone have any ideas what could be causing this?
It's an AMD 64 dual core with a GeForce 210 pci-x graphics card. The issue happens either with out without compositing.
So I've searched across these forums and haven't quite found the same problem I'm having. For the record, I'm running Ubuntu 9.10 So I built my new box, and my video card is a Gigabyte Nvidia GeForce 9600GT (GIGABYTE GV-N96TZL-1GI). I go to System > Administration > Hardware Drivers to install the drivers so I can use those fancy 3D effects. It tells me I need to restart, so I do.
When it comes up though, I get an error message about running in low graphics mode, the top 5th of my screen is blacked out, and the screen has been shifted so that the left boundary is in the middle, and the right boundary goes off the screen and back to the left side. It goes back to working fine (but without the fancy 3D effects) when I remove the drivers. Both drivers in the hardware drivers (185 and 173) have this problem. I'd post log files and such, but I'm at work right now.
After a disk crash I reinstalled openSuSE 11.2 and as always downloaded the latest Nvidia driver for my geforce 8200 graphics.
Unlike all previous cases, this time the driver does not install. The contents of /var/log/nvidia-installer.log are below. The error refers to being unable to to locate version.h
PATH:
Using: nvidia-installer ncurses user interface
ERROR:
I've been trying a bunch of different solutions to getthis fixed. Let me give you the details: I'm currently on Ubuntu 10.04 Lucid Lynx. I have a Geforce FX 5200 graphics card and I have the nvidia proprietary drivers installed (version 96, I tried 173 as well but there's doesn't seem to be a difference).
My monitors native resolution is 1680x1050 but since my graphics card cannot handle that resolution I use 1280x1024. I've had this resolution working before on Ubuntu as well as Windows with the same graphics card. My problem is that in nvidia-control, the list of resolutions does not include 1280x1024, and the closest to that is 1280x900 which is not supported by my monitor. So the only tolerable resolution I can get is 1024x768.. if you've used this resolution then you know that it is not tolerable for long. So I tried to force the resolution by using xorg.conf.. Here it is:
[Code]...
For some reason this isn't forcing 1280x1024.. I'm still in 1024x768 and it still doesn't list it in nvidia-control.. What's weird is that on the previous release (Jaunty or Hardy) this xorg.conf worked fined and got me my 1280x1024.
I have just installed Kubuntu 9.10 in my laptop and it did not ditected my Nvidia 8400 M GS graphics Card I downloaded a driver file
NVIDIA-Linux.x86-19042-pkg1.run to install drivers but when i run it it shows the error error:you appear to be running X server, please exit X before installing.
I have just installed openSUSE 11.1 64 bit on my system. Subsequently registered to get an auto-update repo and auto-updated until no more updates were offered. Then I first tried YaST to install NVidia drivers from the NVidia repo (added their repo), but sax2 wouldn't recognize them. So I downloaded their 190. (beta) drivers, installed the kernel source code and gcc 4.3. Then I switched to a console (Ctrl+Alt+F1), closed the x server, ran the driver install as described (gcc 4.3 is installed). Installer said that all is fine (I checked the log to be sure). So I ran sax2 -r -m 0=nvidia, but the driver still isn't recognized.
View 6 Replies View RelatedOn openSUSE 11.1 I was able to configure KDE 4 for 2 monitors with sax2 (although the resolution was bad).On 11.2 neither SAX2 nor KRandR seem to work. The KDE User Guide says that a driver supporting version 1.2 is necessary. However the nvidia driver for eForce FX Go5200 seems to support only version 1.1.Is there a way to use both monitors with SUSE 11.2? I am quite desperate since for my work using only 1 monitor is definitely a handicap.
View 5 Replies View RelatedWhen i start the install of the open suse linux 11.2 load the kernel but later my display is in black, i think that is my graphic card becouse in other linux only load linux without graphic mode, what i have to do for install open suse?, i can download a driver with the installer or something like?
View 4 Replies View RelatedI cannot get the restricted Nvidia drivers or the Nouveau drivers to work completely. If the Nouveau drivers are being used (after an "apt-get purge nvidia-*"), the text mode seems to work ok, but the X nouveau driver acts as if it cannot recognize the card. The only way I can get into X is to make sure I have the "nv" driver in the xorg.conf. I can then get into X normally.
If I install nvidia-current, the machine will just lock up at the splash screen. The Xorg.0.log file is zero bytes. I've checked and installing nvidia-current properly blacklists the nouveau drivers and I see no evidence in the messages file that the nouveau drivers tried to load in text mode. In fact, it shows the nvidia driver loading for console mode. I've tried the nouveau.modeset=0 kernel option as well, but that doesn't do anything. This is a fairly new nvidia card, maybe only a couple months old. I think it's been out for quite some time though. But it was working fine under Karmic with the restricted drivers. I really want to get this working as I need full support of the video card.
My friend just recently gave me an Nvidea Geforce 4 64mb, and it is supposed to be better than my ATI x700 Pro. I was wondering if there was openGL support for this card, and how do i replace it with my ATI card?
View 1 Replies View RelatedIs there anything special I need to do to use this card in conjunction with Fedora 14? It's been acting a little strange lately. Also I think the card may have some type of 3D support although I'm not entirely sure on that.
View 1 Replies View RelatedI have a 64 bit computer with a 64 bit distribution of Ubuntu. The driver for the onboard video card wasn't supported beyond 8.04, so I didn't upgrade. Yesterday, I bought a NVIDIA GeForce 210 video card. I installed it and Ubuntu detected it and worked, but the resolution was limited to 640x480 (I think). I figured this would be corrected by updating, so I updated to 9.04. When I had to restart, the option to select which OS (Linux or Win) came up, I selected 9.04, and the ubuntu symbol came on. The status bar went to the end and the screen turned black, flickered 5 times, turned black and stopped progressing. The xorg.conf file is:
Section"Driver"
Identifier "Configured Video Device"
Driver "vesa"
EndSection
Section"Monitor"
Identifier "Configured Monitor"
EndSection
[Code]...
I tried changing the driver from "vesa" to "nv" without any effect. Does anyone have any idea what I should do to get this to work?
anyone knows a driver for nvidia's GeForce GT 440 1GB card.I have installed the nvidia swat-x/ubuntu-x driver, it works somewhat but the performance is really bad.
View 5 Replies View RelatedMy 4 yr old Dell XPS 400 has a nVidia GeForce 7300 LE card which won't run Unity as is. How do I determine without actually attempting to install 11.04 if there is an updated driver available that will allow this machine to run Unity?
View 1 Replies View RelatedI am planning on upgrading the video card in my computer, an NVidia GeForce 9500 GT video card, to something that can handle at least 1600x1200 24-bit resolution without noticeable choppiness other "slow-downs" in graphic display. The card in question does have one gigabyte of RAM, but the type of memory it utilizes is DDR2 instead of something, i.e. DDR3 and above, with greater speed. Admittedly, the system in question is used for gaming as well as work. I want to stick with the NVidia brand because it has worked well for me, but I am not sure what would be the correct line of cards to use.
View 4 Replies View RelatedI own an ASUS N61JV-X2 notebook PC that has an Intel HD IGP, nVIDIA GeForce GT 325M GPU, and nVIDIA Optimus technology. I am running OpenSUSE 11.4 64 bit with GNOME. I used to be a former Ubuntu user. I used Ubuntu 10.10 Maverick Meerkat 64 bit. In Ubuntu, it was not recommended that I install the proprietary nVIDIA binary drivers because it would cause me to log into a TTY console upon reboot.
nVIDIA states that they have no plans to support Optimus technology in Linux at any time. Would it be recommended that I install the proprietary nVIDIA binary drivers in OpenSUSE 11.4 64 bit with GNOME? Will I get the same problem as in Ubuntu? How do I do this?
I've just acquired an Lenovo ThinkPad W520, installed openSuSE 11.4 - and tried to install the Nvidia driver... but the X won't start at next reboot due to the following error: "GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors." Revision: 0x09I've tried to install drivers as described at: SDB:NVIDIA drivers - openSUSE - both with click install, and the repositorie way, I blacklisted the "nouveau" driver and "NO_KMS_IN_INITRD" is set to yes!
View 2 Replies View Related