CentOS 5 Hardware :: Mobidata Edge Modem Is Compatible?
Dec 16, 2009
I'm using Mobidata Usb Modem in other Linux (Ubuntu9.10). its model is: MBD-100EU is it compatible in CentOS5.4. i can't run the "lsusb" because i'm still in the Live CD mood!!! But the Hardware Service detect it as Mobidata modem. "dmesg | grep usb" shows the detection but dont attached any of the /dev also i can't run the "modprobe" command due to Live CD mood!!! Where (in the web) may i find the supported USB list for CentOS5.4 .
View 19 Replies
ADVERTISEMENT
May 18, 2010
I use Opensuse 11.2 & Edge/Gprs Modem to connect Internet.I configured /etc/wvdial.conf & /etc/resolv.conf. Now I can connect Internet using this command "wvdial MYNET" in terminal.Now I want to share my internet using Lan card & Netgear Router. If i connect my PC with Router using wire & change option ON BOOT find this device in ifup then it'll show in ifconfig command.
My Router IP : 192.168.0.1 & It gives my PC an IP automatically : 192.168.0.2
I can ping my router.. even I can browse Router Admin page in browser. No problem there.But now If i want to connect my net using wvdial command... net connected... but no data passing!!! If i disable Lan card in ifup then Edge/Gprs net connection again OK!
View 9 Replies
View Related
Feb 22, 2010
I brought my netbook so I could continue to keep up with my homework, which amounts to a lot of typing and editing some TIF files.
Problem: Windows 7 isn't compatible with the router/modem I have access to, so I have no internet access in the apartment we've rented. I know that it works, because I'm using the apartment owner's ancient anemic desktop. Can't do homework on this though.
Problem 2: I have Windows 7 Starter, so I can't use compatibility mode, so I can't use Wubi.
Problem 3: I don't have an optical drive and have just a 512mb flash drive which may not work, so I'm not sure how to fix this.
Problem 4: I don't have a Windows 7 backup disc; never received one.
Problem 5: My dad works with copyright and intellectual property so he'd notice if I pirated Windows and would be extremely not okay with it.
I could probably buy a bigger flash drive if I really had to, hopefully they're not too expensive. I am most comfortqble with Ubuntu but I will use whatever will run the Gimp (or some TIF editor) and Firefox. I cannot afford to get 3 weeks behind on my homework.I've only been off the plane for a few hours and am trying to get used to the French keyboard, so I apologize for any typos that slipped through.
View 9 Replies
View Related
Jun 15, 2010
I was wondering if there was Linux compatible software for Virgin Mobile's USB modem. Officially it's only compatible with Xp, Vista, and Mac OS X.
View 9 Replies
View Related
May 20, 2010
I have a Centos 5.4 server running kernel 2.6.18-164.11.1.el5PAE. It has an internal modem, and I need to be able to issue AT commands from a script to the modem. I need to simply dial a number and hang up. The relevant piece of my script is:
[Code]...
With an external modem, this works no problem. With an INTERNAL modem, the call never goes out. I fired up minicom to make sure the modem was working correctly, and if I issue those AT commands from within minicom, everything works great.
While minicom was running, I noticed a peculiar fact: WHILE minicom is running, the script works from the command line, and I can see all the AT commands and OK's in minicom, (minicom acts as a monitor). When I exit minicom, the script stops working. It appears minicom is creating a bridge between the com port and the modem itself. So, what is minicom doing that I'm unaware of?
The server's sole function is to run asterisk as a voicemail server (avaya wanted well into 6 figure territory to implement this....). This script is to dial an avaya FAC to turn the voicemail message lights on and off on the end users' phones.
View 4 Replies
View Related
Feb 10, 2010
I am trying to get a understanding of how to install a RAID 1 on a Dell Power Edge server.
HARDWARE:
2 - 16gig SCSI dives
1 - 36gig SCSI drive
I have read through some documentation found online and at centos.org but still having problems.
get this accomplished keeping in mind this is my first go at using RAID system.
View 4 Replies
View Related
Oct 25, 2010
I just want to ask if samba3x (which is samba 3.3.8 specifically ) compatible with samba 5.2 (Final) ???. cause I plan to upgrade my samba which is currently samba 3.0.33 PDC w/ LDAP back-end. Is it safe to download samba3x from CentOS 5.5 and install it in 5.2. and additionally I notice that samba3x require some LIBS packages such as libtalloc, libsmclient, libtdb which is not in 5.2.
View 3 Replies
View Related
Jan 19, 2010
We are wavering between a CentOS 5.4 installation (64-bit) and a CentOS 4.x installation (32-bit). Our software is happier with a 32-bit installation, but I wonder if our 64-bit box will have a problem. Can you tell by looking at the data below?
[Code]...
View 4 Replies
View Related
Dec 25, 2010
Looking for some of the known compatible graphics card with Centos? A list of 20 - 30 cards would be nice. Ofcourse i'll need them to be new enough to find easily in any store.
View 6 Replies
View Related
May 28, 2009
I have mounted a server with 4 hdd sata raid 5 with adapter LSI Megaraid SAS/SATA 8204ELP but centos dont detects raid. Can you recommend me a adapter 100% compatible with centos 5 with these requirements:
View 2 Replies
View Related
Dec 11, 2010
I have a small AMD Geode LX 800 (500 MHz) based Nettop that I would like to use at home as home server managing printers, a central data storage, and some other things. Only I can't install CentOS 5.5 due to an Anaconda exception at the very end of the initial setup process, right before it's supposed to start copying the files.Is it true that CentOS/RHEL requires an i686 compatible processor? As far as I know the Geode LX is only i586 and Redhat's system requirements only list x86 as necessary.
View 9 Replies
View Related
Feb 10, 2011
Pl can anyone guide me to connect centos 5.5 using ethernet port to ADSL Broadband modem which is configured in PPPoe mode?
View 19 Replies
View Related
Oct 30, 2010
would like to connect my ZTE AC1710 usb modem to my computer. I use an Acer Aspire 5610Z.
View 1 Replies
View Related
Jan 12, 2009
I have a Dell Inspiron B130 with a Broadcom PCI wireless card installed. I'm tired of doing the ndiswrapper shuffle every time I change OS's (about every 6 months), and am considering just yanking the Broadcom and replacing it with something that will work with Centos out of the box. Preferably it should also work well with Windows, as I may have to revert to XP in the future. Does anybody have any recommendations? Yes, I should look at the HCL, and yes, I plan to, but yes, I would like feedback from you, the expert users. I'm not sure how I will destroy the Broadcom card after I remove it; I'm thinking something involving a propane torch and/or a sledgehammer. I may post pictures.
View 4 Replies
View Related
Feb 25, 2009
I have a CentOS box set up as a small home server right now. It is running a Apache Server. A SVN server and is going be a file server for all my friends. The problem is that it I need to add more SATA ports. RAID is not a big deal to me so the card can be a simple add in card. I am limited to PCI because the board does not have any pci expres slots. I am also interested in what hard drives that card would work with. I am hoping to keep them to 500 Gigs min. The motherboard has two built in SATA prots but I don't use them have had bad luck with them in the past
System:
AMD Athlon 64 3400+ cpu
MSI K8N Neo Series motherboard
3 IDE Hard Drives
1 CD Drive
CentOS 5
View 2 Replies
View Related
Aug 26, 2009
Does anyone know where I can find RHEL compatible rpms for Bind 9.7 and DHCPD 4.1?
View 1 Replies
View Related
Nov 3, 2009
Using my 3G to the net on centos 5.2 ?
View 1 Replies
View Related
Sep 16, 2009
I'm running Centos 5.3 with an analog modem attached to /dev/ttyS0. I'm making an script to run a ppp link, and I need to know if the modem is already in use or not. Where should I look for a lock file and what is the name it's supposed to have?
View 1 Replies
View Related
Jan 25, 2011
i m using an adsl modem router for connecting into the internet while my operating system is windows 7,but i want to learn open source platforms like UNIX and Linux. so for this reason i install a Linux distro which is centos5. how i can configure my modem router with centos. modem router model is Billion BIPAC 5210s.i search internet for its drivers and the only thing which i found modem driver for windows platforms and nothing esle want to know that for installing this modem with my centos i need to download its drivers or not
View 14 Replies
View Related
May 11, 2009
I installed Cent OS 5 in my computer system. I use GPRS modem for browsing the net. I use my cell phone as a modem. The problem is that when I connect the phone modem to the system the computer gets turn off. And it does not start again until I disconnect the usb cable of the phone.how to use a GPRS modem in Cent OS 5?
View 2 Replies
View Related
Jan 1, 2011
This is my first post on forums.i am using centos 5.5 on my pc. i want to use internet on my using my cellphone as modem.internet is running successfuly on my handset.i have got a usb cable to connect it with pc.details are given below:-
1.cellphone= samsung c3200(gprs,edge,3g supporting)
2.connection method= usb cable
3.os= centos 5.5
View 5 Replies
View Related
Jan 20, 2009
on my server (fax server)with Cento O.S 5.2 final kernel 2.6.18-92.el5 the external serial modem 56k us robotic is not recognized.Kudzu not notes the modem.PS .On the same server ,same modem ,same serial but with Centos 4.5 ,this as regular detect.
View 9 Replies
View Related
May 26, 2009
While communicating with cpanel , they said they don't support on any NAT router based network. To host website with cpanel internet should be connected directly with modem (no router) I have a dell poweredge server and recently brought PCI modem. I have 8 IP static addresses from my ISP. cpanel as they said that they don't support networking.
View 3 Replies
View Related
Jul 30, 2010
I am trying to connect my Asus EEEPC to an option icon 431 usb modem.
I have successfully installed the HSO driver however am unable to connect through network manager. I have successfully connected through Rhel Beta 2, Fedora 13 and Ubuntu 9+, however, desperrately want to be able to use centos 5..5
Here's some info up front code...
View 17 Replies
View Related
Aug 23, 2010
I was trying to install bluez 4.69 for my bluetooth phone modem in my centos 5.5 and it says it needs glib 2.14 or above and then I downloaded glib 2.14 but no luck and tried glib 2.15 but same error.(My internet connection is through phone only so I cant use yum install so Im using another system running on windows and copying it to centos system)
View 1 Replies
View Related
Oct 29, 2009
i'm currently having trouble installing my D-Link DU-562M USB Modem in Centos 5.3. That is, my modem is not detected. When i issue the command ls /dev/tty*, i can't see any node pertaining to /dev/ttyUSB0 or more.. what should i do to make my modem work?
View 17 Replies
View Related
Mar 28, 2011
I test the HAUWEI E1552 with SMSTOOLS3and i try to command and testing as following
# lsusb
Bus 003 Device 003: ID 12d1:1446 Huawei Technologies Co., Ltd.
Bus 003 Device 001: ID 0000:0000
[code]....
View 1 Replies
View Related
Nov 30, 2009
Due to PCI limitations on our server, we are trying to connect a Trandnet TDM=C400 ADSL modem via USB but are not having any luck, as the modem appears not to be recognised.
View 8 Replies
View Related
May 16, 2010
I�m trying to configure Centos-server 5.5 to work with Hylafax software and a modem card that as an Ambient MD3200 chip. Lspci detects the card:
[Code]..
View 1 Replies
View Related
Jun 10, 2010
with installing Modem Huawei E170. my modem can not connected and suddenly remove from my PC. i am using Ubuntu LTS 10.04.
View 1 Replies
View Related
