I have a problem when booting my pc.I uninstaled bootchart and since then kernel goes to panic..saying /sbin/boot:no such file or directory..I followed the Repair Installed System from my dvd but it fails at the end and it just reboots the system..Is there any way to baypass this problem without reinstalling the OS?
View 9 RepliesI'm trying to install a BCM4328 (rev 03) 14e4:4328 (rev 03) by using this page: [URL]... But when I get to this step: Step 3: All BCM43xx - Configure NDISWrapper (and WPA Supplicant) sudo ndiswrapper -i bcmwl5.inf I keep getting:
jeffrey@jeffrey-desktop:~/bcm43xx$ sudo ndiswrapper -i bcmwl5.inf
couldn't open bcmwl5.inf: No such file or directory at /usr/sbin/ndiswrapper-1.9 line 219. What am I doing wrong?
I am using Debian Lenny as my server to host multiple databases.
Whenever, I used to add a new database, I used to add an IP address like eth0:test in the /etc/network/interfaces file.
Today when I tried to do the same, I got an error when I tried to start the interface by typing "#ifup eth0:test". I also tried to do in this way "#ifconfig eth0:test up" but both of then yielded the same error saying "/sbin/ifconfig: no such file or directory".
The path is valid and the files are also present there. There are ifup, ifdown, if and ifconfig files in the /sbin directory. I also checked the permissions which is root:root. But still I cannot find the problem.
I am trying to find the ip address on my Red Hat Linux box, but there is no ipconfig file in my /sbin/ directory. I did a 'locate ipconfig' in the terminal and the only files I got were plipconfig, sipconfig.py/c/o, plipconfig.8.gz, ipconfig.h. I dont know what happened to my ipconfig file. Where I can get a new copy of it?
View 4 Replies View Relatedi'm using Centos 5.3 (2.6.27.10-grsec-xxxx-grs-ipv4-64 x86_64 kernel) and i got a problem with installing apf/configuring iptables. It seems that my kernel doesn't support Loadeble Kernel Modules. I'm receiving following message when catting /proc/modules: Quote: cat: /proc/modules: No such file or directory /sbin/modprobe -l FATAL: Could not load /lib/modules/2.6.27.10-grsec-xxxx-grs-ipv4-64/modules.dep: No such file or directory
View 4 Replies View RelatedWhy do I keep getting .gvfs (gnome virtual file system) file appearing as corrupt in /~/usr directory, I can get rid of it by unmounting, but it re-appears later on. It is causing problems as it interrupts my backups (which are automated) with an error message,ListError .gtk-bookmarks/.gvfs [Errno 13] Permission denied: '/home/jimt/.gvfs'
drwxr-xr-x 2 jimt users 4.0K Jun 22 22:00 .gstreamer-0.10
-rw-r--r-- 1 jimt users 132 Jun 24 11:50 .gtk-bookmarks
d????????? ? ? ? ? ? .gvfs
-rw------- 1 jimt users 4.3K Jun 24 11:50 .ICEauthority
drwxr-xr-x 3 jimt users 4.0K Jun 23 08:41 .icedteaplugin
I'm trying to install amarok from git but I keep getting this error:
[code]...
I thought libXext provided shape.h but I have both xorg-x11-libXext and xorg-x11-libXext-devel installed.
[code]...
In a fresh install of 11.4 I see a file named "1" (the number "One") in the / (root) directory.
Code:
vodoo@host:/> ls -l 1
-rw-r--r-- 1 root root 0 May 31 11:29 1
Who creates this file and what is it good for?
I upgrade the system from 11.1 to 11.2 seems everything work fine, no error no warning, after a reboot the consol show : mount error while loading shared libraries: libvolume_id.so.1: Cannot open shared object file: No such file or directory. when I try to repair the system the repair tool cannot find the root partion,
View 1 Replies View RelatedI downloaded a mouse theme form gnome look and installed it in the themes. But it has not appeared in the pointer themes section in custimation even though it said that it is installed correctly.When I drag the file to install it again it says something along the lines of it cannot copy a directory over a directory.Where can I find where the mouse/pointer theme is located and delete it. I have searched filesystem, google and these forums and not had any luck yet.
View 1 Replies View RelatedI have updated opensuse 11.3 via yast and after reboot I got this errorerror: file not found.error: you need to load kernel first.Press any Key to continue.
View 9 Replies View RelatedI have a Lenovo X60 with Intel Centrino Duo Core @ 1.83GHz 1.83GHz, and 0.99 GB of RAM. I am running a dual boot with Windows XP SP3 and the latest version of Ubuntu desktop. My problem is that after I ran the Defrag my C: drive in Windows, I can into my ubuntu.I was greeted with the following error message when i tried to boot into ubuntu {Target file system doesn't have /sbin/init}
View 2 Replies View RelatedI just installed amanda-backup_client-2.6.0p2-1.rhel4.i386.rpm on my Red Hat Enterprise Linux 4 system. But I don't know who to check if it successfully installed or not. When I try to run amrecover from root, I get:
-bash: /usr/sbin/amrecover: cannot execute binary file
since yesterday that my ubuntu does not boot. This message appears...Target filesystem doesnt have /sbin/init,No init found. Try passing init=bootarg. (initramfs)
I boot ubuntu-live from a usb flash drive, but i can't mount the partition where i have installed ubuntu /dev/sda6. Either run fsck command. this error appears.... Filesystem mounted or opened exclusively by another program?
Click here for solution... http://ubuntuforums.org/showpost.php...99&postcount=3So I just realized how stupid I was being trying to run these commands for a NTFS partition... so I searched and used Gparted to check sda2, and also ran
Code:
root@ubuntu:/home/ubuntu# sudo ntfsfix /dev/sda2
Mounting volume... OK
[code]....
I'm trying to use a software on OpenSuSE 11.3 (64) and am getting an error message similar to the one in the title. I did a bit of background reading on libjpeg.so.62 that the program was asking for. I noticed that I had a file called libjpeg.so.8 in my /usr/lib/ folder. I found a libjpeg.so.62 file online, downloaded it and copied to to my /usr/lib folder, but its not making any difference.
View 1 Replies View Relatedi should install a old version of Java EE, so i can write code for a old kind of webservice. Here's what happens:
Code: michael@michi:~/Downloads$ ./j2eesdk-1_4_03-linux.bin./j2eesdk-1_4_03-linux.bin: error while loading shared libraries: libstdc++-libc6.2-2.so.3: cannot open shared object file: No such file or directory I looked for the library in Synaptic, but there are only newer versions of libstdc++. I couldn't find a solution to this problem i was able to follow.
I am still probably of the windows mindset when it comes to security. I ran rootkit this morning and received the following error messages;
[09:43:49] /usr/sbin/unhide [ Warning ]
[09:43:49] Warning: The file '/usr/sbin/unhide' exists on the system, but it is not present in the rkhunter.dat file.
09:43:49] /usr/sbin/unhide-linux26 [ Warning ]
[code]....
Recently I've installed Open Suse 11.3 along with Ubuntu 9.10 on my PC ( made it a dual-boot OS ). This morning while logged in, in Open Suse 11.3, found out that there were important update for kernel in Yast. So, did the update and then required to restart the PC. In the Grub/boot menu, I chose to log-in to Open Suse 11.3, but after a while it returned with " Error 15, file not found ". Luckily I was able to log-in in Ubuntu 9.10. Assumed that Error 15 is always related to misplaced or wrong configuration of Grub in the partition, I did several searching via Google, and found this possible solution HowTo Boot into openSUSE when it won't Boot from the Grub Code on the Hard Drive . So I tried the " Broken Grub menu: boot to the menu, drop to a console and boot openSUSE direct " method. But rightly after the " find /boot/grub/menu.lst " command as instructed in the solution, it returned with ( hd0,0 ) and ( hd0,4 ). Why there are 2 bootloader in the Grub ? Which bootloader should I choose ? And for convenience, here is my " menu.lst " folder that I get via Terminal in Ubuntu 9.10 :
$ cat /boot/grub/menu.lst
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
[code]....
I want to convert the file system on my boot drive from ext4 to btrfs.
I have converted by 2nd drive, unsure of how to convert the boot drive and partitions.
I cannot boot my 9.10 system as of this morning. I see these messages:
insserv: warning: script 'dbus' missing LSB tags and overrides
insserv: warning: script 'gdm' missing LSB tags and overrides
insserv: warning: script 'K20acpi-support' missing LSB tags and overrides
insserv: warning: script 's99webmin' missing LSB tags and overrides
/sbin/insserv failed, exit code 1
I then hear 2 or 3 faint clicks and I get a blank screen, with 2 faint lines at the top. I have been searching and trying to figure this out, but to no avail.
System responds (i'm translating from Italian):
"Unable to run the command '/usr/sbin/ipblock start_gui"
I checked directory /sbin, but there is no track of this "Ipblock star_gui". I have a Suse 11.4 updated system.
Toshiba notebook is set up to triple boot win7, mepis 8.5 and os 11.3.Recent update of os11.3 left system with boot failure, "file not found".I booted mepis and used utility to reinstall grub, but no joy.
Appeared to install ok but on reboot, sda5 identified as 'mepis' not os11.3 and would not boot. Win7 & mepis boot ok.
Next, booted live Parted Magic and repaired as per another thread here, but again, no joy.NONE of the systems will boot.Rebooted mepis live cd and reinstalled grub again. Sda5 still identified as mepis and will not boot. Win7 & mepis boot ok.
Im sure that this issue is pretty old and you get some results from forums when you google it, but I cant seem to find the solution : When I boot my system ( its duel boot , win7 / Slackware 13.1 ) the message : L 99 99 99 pops up. I know this has to do with the MBR, When I looked online this is what people were told to do:
[Code]///
Let's get clear with all bin and sbin folders(from filesystem hierarchy standard):
So the question is: Why there are so many directories and what are the meanings of /usr/sbin, /usr/local/sbin and /usr/local/bin?
Many programs are distributed through archives and we have to build them from source code. Usually they have makefile so it's quite easy. This process involves creating files in usr/local/lib, usr/local/bin... usr/local/whatever without creating specific folders for a given program.
I think it's not right because if we need to remove the program we have to manually delete every of its files if the program's creator didn't take care of it.
After boot, Fedora 14 gives the following message, on my HP Pavilion dv2701tx laptop.
Starting udev: udevd-work[454]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/power/level} for writing: No such file or directory
I suspect it has something to do with my Authentec AES2501 fingerprint reader. I need it to work for my project, but it's not working, even though it works fine in the Windows 7 installed on my system.
After upgrading from 10.04 to 10.10 I have had some problems booting my Ubuntu. It all started when restarting after the upgrade, and I got the error;
Code:
mount: mounting /dev on /root/dev failed: No such file or directory
mount: mounting / sys/ on root/sys failed: No such file or directory
mount: mounting /proc on /root/proc failed: No such file or dirctory
Target filesystem doesn't have /sbin/init.
No init found. Try passing init= boot arg
BusyBox v1.13.3 (Ubuntu 1:1.13.3.1ubuntu11) built-in shell (ash)(initramfs) After searching the Internet, I found a "solution". I just had to boot with a USB stick with the Ubuntu Rescue Remix (the normal Ubuntu USB won't boot either), and i wrote;
Code:
sudo fsck /dev/sdb5
Now I could start my Ubuntu again. So whats the problem? If I turn off my computer the normal way, there is no problem, but if I log off, put it into sleep mode, if something happens and I have to turn it off with the button it goes back to the first problem, and I have to reboot it with the USB stick and fix it all over again! If I don't have the USB stick with me, I probably wont be able to use my laptop!
I have presently a (working) boot dedicated partition, where grub stuff resides, but I want to change it to a common "/boot" folder in the root partition (in a different hdd). For some reason I can't do it. The first thing I did was to copy all the things that are in the boot partition to a boot folder on the root partition. After that, I tried: grub-install /dev/hdc1 (which is odd but it's where the root partition actually is)
When I did it from the linux I have installed on my hdd, it actually did something, I don't remember all the output (except that there was something about it not being able to access hda, which is oddly the dvdrom), but it didn't work. From a live CD, the same command (grub-install /dev/hdc1) is answered with: Could not find device for /boot: Not found or not a block device. From grub's own prompt, the things are more or less the same. First of all, it does not find stage1, even though I did copy the content from the boot partition to a boot folder in the root partition.
I tried to proceed, anyway, with root (hd1,0) and setup (hd1,0) (which is /dev/hdc1, according with the "geometry" info given by grub). "Root" is accepted, but "setup" is answered with: Checking if "/boot/grub/stage1" exists... no Checking if "/grub/stage1" exists... no Error 2: Bad file or directory type But the files are there. I can't "cat" the menu.lst from grub though, unlike with the actual working boot partition. The same error message. From the terminal, however, it's all there. I tried with /dev/hdc1 both mounted and unmounted, the same message. So, basically I have two questions, I guess:
1 - can I really do this sort of thing running a linux installed on a hdd, rather than a live cd, or is the live cd preferable for some reason?
2 - what am I missing?
(A note that may worth making is that I'm using the soon-to-be deprecated grub version, 0.9 or something, not grub2. I think it shouldn't be a problem since I've installed the system with the old version to begin with, but that may be irrelevant, I don't really know)
I want to do the following.
1. have a directory full of subdirectory
2. Pick the first file from every sub and copy that to the main directory and also rename that file to the same name as the subdirectory's name
3. need to work in commandline best is a simple script.
"/sbin/ldconfig: /usr/lib/ is not a symbolic link"
zypper in <packages>
Retrieving package ..
Retrieving: ..
Installing: ..
Additional rpm output:
/sbin/ldconfig: /usr/lib/ is not a symbolic link
I get this error installing any package