Debian Configuration :: /sbin/ifconfig: No Such File Or Directory
Aug 2, 2010
I am using Debian Lenny as my server to host multiple databases.
Whenever, I used to add a new database, I used to add an IP address like eth0:test in the /etc/network/interfaces file.
Today when I tried to do the same, I got an error when I tried to start the interface by typing "#ifup eth0:test". I also tried to do in this way "#ifconfig eth0:test up" but both of then yielded the same error saying "/sbin/ifconfig: no such file or directory".
The path is valid and the files are also present there. There are ifup, ifdown, if and ifconfig files in the /sbin directory. I also checked the permissions which is root:root. But still I cannot find the problem.
View 9 Replies
ADVERTISEMENT
Aug 14, 2011
i recently started sockets programming. In the process i began to look for relevant network information about my computer and realized that ifconfig wasn't displaying the same information that resides in my /etc/network/interfaces file. On the interfaces file my IP address is 192.168.1.109 for interface eth0 but ifconfig displays 192.168.1.101. I was under the impression that ifconfig got its information from the interfaces file but clearly doesn't. I tried re configuring the device with ifconfig and then disabling and re enabling the device with ifdown and ifup so that the device updated its information but it didn't.
[Code]....
View 3 Replies
View Related
Feb 1, 2010
I have a problem when booting my pc.I uninstaled bootchart and since then kernel goes to panic..saying /sbin/boot:no such file or directory..I followed the Repair Installed System from my dvd but it fails at the end and it just reboots the system..Is there any way to baypass this problem without reinstalling the OS?
View 9 Replies
View Related
Jun 4, 2010
I am trying to find the ip address on my Red Hat Linux box, but there is no ipconfig file in my /sbin/ directory. I did a 'locate ipconfig' in the terminal and the only files I got were plipconfig, sipconfig.py/c/o, plipconfig.8.gz, ipconfig.h. I dont know what happened to my ipconfig file. Where I can get a new copy of it?
View 4 Replies
View Related
Aug 23, 2011
I have some errors when run the mount -all command: mount: wrong fs type, bad option, bad superblock on /dev/sdc5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Failed to open /proc/filesystems: No such file or directory
[Code]..
View 14 Replies
View Related
May 19, 2009
i'm using Centos 5.3 (2.6.27.10-grsec-xxxx-grs-ipv4-64 x86_64 kernel) and i got a problem with installing apf/configuring iptables. It seems that my kernel doesn't support Loadeble Kernel Modules. I'm receiving following message when catting /proc/modules: Quote: cat: /proc/modules: No such file or directory /sbin/modprobe -l FATAL: Could not load /lib/modules/2.6.27.10-grsec-xxxx-grs-ipv4-64/modules.dep: No such file or directory
View 4 Replies
View Related
Jul 22, 2010
I'm trying to install a BCM4328 (rev 03) 14e4:4328 (rev 03) by using this page: [URL]... But when I get to this step: Step 3: All BCM43xx - Configure NDISWrapper (and WPA Supplicant) sudo ndiswrapper -i bcmwl5.inf I keep getting:
jeffrey@jeffrey-desktop:~/bcm43xx$ sudo ndiswrapper -i bcmwl5.inf
couldn't open bcmwl5.inf: No such file or directory at /usr/sbin/ndiswrapper-1.9 line 219. What am I doing wrong?
View 1 Replies
View Related
Aug 20, 2015
I am having some troubles with my networking. I have a fresh install of Debian 4.0.4-1. My problem is: I boot up and everything is great.
Code: Select all~# ifconfig
eth0   Link encap:Ethernet HWaddr 00:1e:68:46:4b:aeÂ
    Â
   UP BROADCAST MULTICAST MTU:1500 Metric:1
   RX packets:0 errors:0 dropped:0 overruns:0 frame:0
     TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    Â
[Code] ...
I try to switch the hardware switch on and off with no avail. The only way to fix it is to reboot. But then when I ifconfig down and up I'm stuck in airplane mode again.
View 4 Replies
View Related
Aug 26, 2015
I work in a compagny and i encounter a problem with the samba trash.When i delete a file from our network directory, the file don't move to the samba trash directory. But, the server create the same samba tree like the orginal file. It's more simple with a example.This is the file i delete to my samba tree S:departementgestion_informatiqueinformatiquecommut est.txt.This is the samba tree that the server create at the moment when i delete my file : @IPcorbeilledepartementgestion_informatiqueinformatiquecommun
The problem is here : We want the file test.txt into this trash tree and it isn't.This is the Samba trash configuration :
# Samba Trash
#--------------------------------------------
# http://samba.org/samba/docs/man/Samba3-HOWTO/VFS.html
[code]....
The samba trash work for an another site of our company.
View 0 Replies
View Related
Jan 6, 2010
my squid show like this when i try create swap directory
[Code]....
View 2 Replies
View Related
Feb 26, 2016
I had directory inside www that is gone. I am not sure if I removed it my mistake somehow or there is something weird going on. How would I track down what happened to this directory?
View 2 Replies
View Related
Jun 28, 2011
I've got a problem when I try to use to load modules like when I try : modprobe tun It says : FATAL: Could not load /lib/modules/2.6.32-4-pve/modules.dep: No such file or directory I've checked in my filesystem, the directory 2.6.32-4-pve doesn't exist, instead I have 2.6.39.2.110628 So how could I make modprobe look into the right directory ?
View 4 Replies
View Related
Jan 17, 2016
Setup a DNS/DHCP/Directory server on Debian? I would like to configure the things in Debian so that can join Linux and Windows(if possible as m not sure yet) clients to the directory server. Any links to setup both Forward and Reverse lookup zone in the environment.
View 4 Replies
View Related
Apr 10, 2010
i have created a wordpress user with a symbolic link from his home (/home/wordpress) to /usr/share/wordpress but when wordpress ftps to wordpress home dir it does not follow the sym-link. is there a way to set default ftp dir for the wordpress user to /usr/share/wordpress rather than /home/wordpress?
View 6 Replies
View Related
Mar 9, 2011
I have one of my user's home directory on a seperate partition, and I was wondering if there was a way to only mount it when/if the user is logged in and unmount it if they log out.
View 1 Replies
View Related
Aug 20, 2011
I recently bought a new hard disk for my /home tree. I don't have encrypted home directories currently, but I was wondering if there is an easy way to encrypt my home directory so that it is automatically decrypted when I'm logging in (console/kdm). Basically I would like to manually do same thing as Debian installer would have done.
I'm running Squeeze.
View 2 Replies
View Related
Feb 28, 2016
I've been working on building an LTSP server for diskless booting. I have a tftp server that's booting the system. I followed the steps on [URL] .... to build the LTSP server.
I had to make one change from the guide. I have a cisco router that's acting as the DHCP, I'm not very familiar with Cisco IOS so instead of playing with that, I decided to modify the default file on the PXE.
I commented the kernel append line and added the following instead
/srv/tftp/ltsp/amd64/pxelinux.cfg/default
Code: Select allappend initrd=initrd.img-3.16.0-4-amd64 init=/sbin/init-ltsp root=/dev/nfs rw nfsroot=10.0.5.99:/opt/ltsp/amd64 ip=dhcp
I'm mounting the nfs as a rw file system for now. I'm planning to make it read only once I have it working the way I want. In addition to this, I also chroot into the LTSP root and installed lightdm + mate. As I understood what I read, this would boot the environment on the diskless system. All of this seem to work correctly.
What I need to do next is to find a way to setup the LTSP clients to log in by authenticating on the active directory. I understand that the login account used by the LTSP client has to exist on the LTSP server.
I have successfully added the LTSP server as a worksation within the windows domain and I can log into domain accounts from the LTSP server but domain credentials do not work when using an LTSP client, I can only log in if I use an account that exists on the LTSP server. I wanted to know if there is a way to accomplish AD authentication.
Do I have to build an LDAP server on the LTSP server, sync accounts with the Active Directory to be able to log in with AD credentials?
View 2 Replies
View Related
Apr 4, 2010
I am planning to build a server in future. That will be a computer with GNU. It will be a router and file server. It will get the VPN-Internet and share it with all the PCs connected to LAN. There will be Samba for file sharing. And I'm thinking that if I just share some directory on that server with Samba, it will be possible to get access to that dir from VPN. So it's not very safe to do that. Is it possible to prevent access to Samba dir from VPN connection?
View 7 Replies
View Related
Jun 29, 2010
I recently reinstalled Lenny and I am attempting to save my /home directory. I used the graphical install and when it came to the part about partitioning, I created a new /home partition "hdb1" and told the installer to ignore my old /home partition "/dev/hda9".Following the completion of the install, I logged in and changed my /etc/fstab so that /home --> my old /home partition "/dev/hda9". I then mounted the old partition to /home and rebooted the system. Now, when I go to my /home directory >> properties, I can see that the files I had are on the drive (2GB are used) --- but --- I cannot actually see the files??
View 1 Replies
View Related
Jan 18, 2011
2 of us have been googling all morning trying to find out how we can restrict ftp logins to their own home directories only but nothing we've found so far has worked. We've tweaked sshd_config so that they default to their home directory but they are able to navigate up/across/down to everything. This is a "straight-out-of-the-box" debian 5.0.5 Netinst. Just a basic system with Apache/MySql/PHP/SSH and no desktop.
View 6 Replies
View Related
Jan 22, 2011
I followed this doc for the "debian method" for building the kernel: [URL]. I installed the source in /var/tmp/src/linux-2.6-2.6.32 , configured it, and tried make-kpkg modules-image. The error I get is:
checking for current directory... /usr/src/modules/alsa-driver
checking cross compile...
checking for directory with ALSA kernel sources... ../alsa-kmirror
checking for directory with kernel top-level makefile... /var/tmp/src/linux-2.6-2.6.32
checking for directory with kernel headers... failed
make[2]: *** [configure-stamp] Error 1
make[2]: Leaving directory `/usr/src/modules/alsa-driver'
make[1]: *** [kdist_image] Error 2
make[1]: Leaving directory `/usr/src/modules/alsa-driver'
Module /usr/src/modules/alsa-driver failed.
I tried some hacks such as setting KBUILD_SRC or ln -s linux-headers-2.6.32-5-amd64/ /usr/src/linux - but these fail too.
View 2 Replies
View Related
Feb 1, 2011
I need to add another user besides the one set up during the installation procedure but I also need to limit all users to use only their own /home/user directory.
View 4 Replies
View Related
Feb 2, 2011
I followed these steps to add a client to my active directory domain, everything is working as expected except that when a username has whitespace it creates a directory in /home with whitespace and gconf fail to access his config dir in the user's home. KDE also fails to start but I don't know what's failing yet. I found that the easiest way to fix these issues is to replace whitespaces by underline in homepaths so I changed the pam_mkhomedir source to replace the whitespaces and save it using the usermod command. It should work but is not... the reason is that I can't change the user data using the usermod because domain users are not in /etc/passwd.
View 5 Replies
View Related
May 26, 2010
I have a Lenovo X60 with Intel Centrino Duo Core @ 1.83GHz 1.83GHz, and 0.99 GB of RAM. I am running a dual boot with Windows XP SP3 and the latest version of Ubuntu desktop. My problem is that after I ran the Defrag my C: drive in Windows, I can into my ubuntu.I was greeted with the following error message when i tried to boot into ubuntu {Target file system doesn't have /sbin/init}
View 2 Replies
View Related
Jun 8, 2010
I just installed amanda-backup_client-2.6.0p2-1.rhel4.i386.rpm on my Red Hat Enterprise Linux 4 system. But I don't know who to check if it successfully installed or not. When I try to run amrecover from root, I get:
-bash: /usr/sbin/amrecover: cannot execute binary file
View 4 Replies
View Related
Sep 14, 2015
I don't know if this should be a followup to my prior topic [URL] ....
Each of the pieces I've installed all have an "Alias" directive in the conf file to link the directory where they live to be present on my server. For instance, DotClear lives in /usr/share/dotclear/web/ and there is a directive
Code: Select allAlias /dotclear /usr/share/dotclear/web
that directs http://myserver/dotclear to that site.
Now, I've set up VirtualHost entries for my DotClear and Owncloud with their own hostnames.
Code: Select all<VirtualHost *:443>
  ServerName     myowndotclear.com
  ServerAlias     www.myowndotclear.com
  DocumentRoot    /usr/share/dotclear/web
[Code] ....
Something similar for Owncloud.
The problem is when I go to [URL] ...., I get to my mythweb site.
This is not so good. So, for the sites that have their own hostnames, I removed the "Alias ..." directive. Of course, now I can't get to the hosts by going to the primary site which is probably fine, but I also still get my mythweb since that doesn't have it's own virtualhost entry.
This doesn't seem like correct behavior. Is there a better place to put the "Alias ..." directive so that it only works from one site and not all of them?
I am also thinking I should just link the directories into /var/www/html, but I'm not sure that's a better solution.
View 2 Replies
View Related
Aug 17, 2015
There is this bug in the latest version of Ubuntu, which is also Jessie, which is:
Can't copy a file from SMB share to the local file system: Software caused connection abort
The problem, apparently, is that newer versions of Samba hit servers with multiple requests at the same time, and for some reason the Zyxel and Iomega boxes can't handle this. The best solution they've come up with is to modify the smb.conf file on your server to include this setting: "max mux = 1".
Here is the reference material on this bug: [URL] ....
People who develop samba have fixed it in the latest version but neither the ubuntu nor Debian have released the fixed version of nautilus, as of yet. Here, is the reference: [URL] ....
View 0 Replies
View Related
Apr 4, 2010
I am still probably of the windows mindset when it comes to security. I ran rootkit this morning and received the following error messages;
[09:43:49] /usr/sbin/unhide [ Warning ]
[09:43:49] Warning: The file '/usr/sbin/unhide' exists on the system, but it is not present in the rkhunter.dat file.
09:43:49] /usr/sbin/unhide-linux26 [ Warning ]
[code]....
View 2 Replies
View Related
Jun 16, 2011
This might be nothing but when booting a computer directly into the console (tty), and running htop, I expect the list of running processes to be very short, but it turns out I have more than 50 instances of /usr/sbin/console-kit-daemon --no-daemon running (see screenshot below). Is this normal?
View 2 Replies
View Related
Mar 3, 2011
I have a problem with the network. Worth two network cards and Ian wan. Do not take the ip. When the system boots not included until you do the command ifconfig eth0 up. The network card is connected to a router, he does not see it. Router working, tested. Network card is working well, tested on Windows. RX RT packages go, withheld support for ipv6 and packages no longer go.
View 14 Replies
View Related
