since the recent upgrade to Maverik every time I boot this error message appear on the top of the screen: "modprobe: Fatal: Could not load /lib/modules/2.6.35-22-generic/modules.dep: no such file or directory" fter that plymouth starts without any graphics and the first visible object is the login interface (GDM)
View 1 RepliesTonight I installed ubuntu 10.10 (32 bit) on an external usb harddrive with a dvd I burned and I used my older desktop. I disconnected all internal and external drives first so everything had to be put on the usb drive I selected (only option available). I used the option to load extra software, use the entire hard drive, and let the software do it's thing. I basically had no options where to put things and it didn't have much choice.
When I boot the usb drive on my laptop (win 7 64 bit) by telling the bios to boot to it first... I get an error: modprobe: FATAL Could not load /lib/modules 2.6.35-22 generic modules No such file or directory. This message appears twice and then it does boot into ubuntu and seems to work fine. I'm new to this OS so that is an uneducated guess but the things I have done seem to be working. So exactly what is this error referring too? Is there a way to fix the problem or do I just ignore it.
I have server 10.04 running, and I modified my fstab file to automatically mount an NTFS partition on startup, but after a reboot, I see that I clearly did something wrong, as now it will not boot. The output is:
[Code]....
init: ureadahead-other main process (923) terminated with status 4 If this is an error with my changes to the fstab file, is there any way I can access is to change it? No matter what i do I can't get it to boot.
Tried updating today from Ubuntu 10.04 to 10.10. Seemed to go ok, but on reboot I got the message
Error Modprobe FATAL Could not load /lib/modules/ 2.6.35-21-generic/modules.dep no such file or module
I've just install qemu-kvm from [URL]
I run modprobe kvm and modprobe kvm-intel to load the modules, but the second command won't work.
It gives the following error -
Code:
root@mika:/home/mika# modprobe kvm-intel
FATAL: Error inserting kvm_intel (/lib/modules/2.6.33.4/kernel/arch/x86/kvm/kvm-intel.ko): Operation not supported
I took some pictures tonight and plugged in my flash card reader (via usb) as always. Only this time, the device isn't assigned a proper location (like "sdc3").
A little research later and I *think* I need the module "usb-storage", which I can't get to load. It's been a *long* time since I had to mess with modules and I'd like some fresh eyes on what the problem might be.
This is my lsmod output:
Code:
I also ran modprobe with -n -v:
Code:
I have run depmod -a and tried the modprobe again...
Code:
If I drill down to the /lib/modules/<kernel -r>/drivers/usb/storage/ where the .ko file is and say:
Code:
So.... since I haven't changed anything that I can think of since the last time I took pictures...what happened? How do I fix this?
I recently got a eSata docking station for hard drives and after deciding to make those volumes encrypted LVM's, I created my first logical volume. After setting it up in yast2 and rebooting I received a prompt for the lvm password, gave it and received:
Mar 17 13:38:21 blkdragon kernel: [ 1105.172687] padlock: VIA PadLock not detected.
Mar 17 13:38:21 blkdragon kernel: [ 1105.313056] alg: No test for stdrng (krng)
Mar 17 13:38:21 blkdragon kernel: [ 1105.323189] alg: No test for stdrng (ansi_cprng)
Mar 17 13:38:22 blkdragon kernel: [ 1105.416892] padlock: VIA PadLock Hash Engine not detected.
Mar 17 13:38:22 blkdragon modprobe: FATAL: Error inserting padlock_sha (/lib/modules/2.6.31.14-0.6-desktop/kernel/drivers/crypto/padlock-sha.ko): No such device
Boot resumed and I looked for the reason for this, the padlock-sha.ko module does exist in the appropiate place and the volume was mounted in spite of the error message. Lvmdump seems to indicate that the volume is, in fact, encrypted. My thoughts at the moment are that the volume was encrypted by aes, so the padlock-sha.ko was not necessary to mount the volume. Backtracking the message log the same error happened during the creation of the volume before rebooting. The kernel version gives it away but it's a 11.2 machine.
(Opensuse 11.4, nvidia, core2) PROBLEM: cpu goes into C3 powersaving state even on full load (even when disabled from bios) (acpi=off prevents this). opensuse 11.4 kernel ignores boot option processor.max_cstate=2 (option has no effect). cpufreq util should be able to change governor policy to performance, however acpi-cpufreq driver doesn't load: modprobe acpi-cpufreq -> FATAL: error inserting acpi_cpufreq (/lib.../acpi-cpufreq.ko): No such device
View 7 Replies View RelatedI am trying to install a program called airfart and when I run make after cd'ing to the appropriate file i get this
Code:
g++ -g `pkg-config gtk+-2.0 --cflags` -o src/main.o -c src/main.cpp
Package gtk+-2.0 was not found in the pkg-config search path.
Perhaps you should add the directory containing `gtk+-2.0.pc'
[code]....
I am trying to upgrade my NAS with anew toolchain, gcc-4.5.2. The NAS have been "hacked" fonz_plug, that contain a gcc version 4.1.3 with uClibc. I have download all needed tar files and done the following.My goal is to upgrade the gcc to 4.5.2 and replace the ucLibc on the system with a GNU libc.
# Pass one
#
# binutils
./configure --prefix=/ffp --libdir=/ffp/lib --includedir=/ffp/include --with-gmp=/ffp --with-mpfr=/ffp
But when I try to compile the gcc with
../configure --prefix=/ffp --libdir=/ffp/lib --includedir=/ffp/include --enable-__cxa_atexit --with-float=soft --enable-languages=c,c++ --with-build-sysroot=/ffp --with-build-time-tools=/ffp/bin --with-system-zlib --enable-threads=posix --disable-bootstrap
[Code]...
I'm using Slackware 13.37 x64 (upgraded to slackware-current) and I have trouble compiling mysql workbench 5.2.34.
The error is:
Code:
scintilla-marshal.c:2:25: fatal error: glib-object.h: No such file or directory
But I have that glib-object.h file:
Code:
$ locate glib-object.h
/usr/include/glib-2.0/glib-object.h
This is when I try to compile version 5.2.27:
Code:
./PlatGTK.cxx:13:21: fatal error: gdk/gdk.h: No such file or directory
Code:
$ locate gdk.h
/usr/include/gtk-1.2/gdk/gdk.h
/usr/include/gtk-2.0/gdk/gdk.h
Im sure that this issue is pretty old and you get some results from forums when you google it, but I cant seem to find the solution : When I boot my system ( its duel boot , win7 / Slackware 13.1 ) the message : L 99 99 99 pops up. I know this has to do with the MBR, When I looked online this is what people were told to do:
[Code]///
whenever i am trying to compile a c++ program i am getting the following error sample.cpp:1: fatal error: iostream.h: No such file or directory compilation terminated
View 1 Replies View RelatedI'm trying to build a program called Obpager, but I'm getting an error saying I don't have xlib.h. From what I understand, that file is included in libx11-dev, which I have installed. Any idea?
Code:
dagoss@MAGIC-PORT:~/Downloads/obpager-1.8$ make
Compiling src/main.cc
In file included from src/main.cc:33:0:
[code]....
I have updated to ubuntu 10.10, but when I try to compile chromium on ubuntu, I get this error:
Code:
In file included from /usr/include/gtk-2.0/gdk/gdkcairo.h:28,
from /usr/include/gtk-2.0/gdk/gdk.h:33,
from app/active_window_watcher_x.cc:6:
/usr/include/gtk-2.0/gdk/gdkpixbuf.h:37: fatal error: gdk-pixbuf/gdk-pixbuf.h: No such file or directory
What I don't understand is why gtk-2.0/gdk/gdkpixbuf.h complains that gdkpixbuf/gdk-pixbuf.h is not found. And how can I fix it?
Here is what i do: make clean make makefiles CCARGS='-DEF_CONFIG_DIR="/opt/product/postfix-2.6.5/etc"
-DEF_COMMAND_DIR="/opt/product/postfix-2.6.5"
-DEF_DAEMON_DIR="/opt/product/postfix-2.6.5/libexec"
-DEF_MAILQ_PATH="/opt/product/postfix-2.6.5/bin/mailq"
-DEF_DATA_DIR="/opt/product/postfix-2.6.5/lib"
-DEF_NEWALIAS_DIR="/opt/product/postfix-2.6.5/bin/newaliases"
[Code]...
make install then i got this error: postfix: fatal: chdir(/usr/libexec/postfix): No such file or directory make: *** [install] Error 1 I don't understand why it's checking the usr/libexec folder for the daemons although I've set the folder to /opt/product/postfix-2.6.5/libexec in the makefile. Here is also the cat of my makedefs.out:
[Code]....
i'm using Centos 5.3 (2.6.27.10-grsec-xxxx-grs-ipv4-64 x86_64 kernel) and i got a problem with installing apf/configuring iptables. It seems that my kernel doesn't support Loadeble Kernel Modules. I'm receiving following message when catting /proc/modules: Quote: cat: /proc/modules: No such file or directory /sbin/modprobe -l FATAL: Could not load /lib/modules/2.6.27.10-grsec-xxxx-grs-ipv4-64/modules.dep: No such file or directory
View 4 Replies View RelatedMy USB stick is this one: [URL] I can't get it to scan my frequencies. PC finds the stick (lsusb):
Code:
Bus 002 Device 005: ID 15a4:9016 Afatech Technologies, Inc. AF9015 DVB-T USB2.0 stick When I plug it in, dmesg shows this:
Code:
[ 5680.696043] usb 2-2: new high speed USB device using ehci_hcd and address 7
[ 5680.834917] usb 2-2: configuration #1 chosen from 1 choice
[ 5680.849872] af9015: tuner id:179 not supported, please report!
[ 5680.852951] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 10 -> 7
[code]....
But if the directory is created, then after the same command I have
Code:
scanning /usr/share/dvb/dvb-t/lv-Riga
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
main:2273: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 19 No such device
I found on the internet a firmware for my USB HDTV DVB-T stick named "dvb-usb-af9015.fw" and copied it into /lib/firmware/ but I have not seen any difference with that.
i have ubuntu karmic 9.10 and when i try to update anything or install anything the a very similar error occurs."(Reading database . . . 55%dpkg: unrecoverable fatal error , aborting: files list file for package `com.palm.net.precoddr.fcoaster' contains empty filenameit repeats this message 3 times then gives up i believe.
View 9 Replies View RelatedThis box is running 10.04 server, it's been running perfectly for almost 6 weeks. It's only function in life is running MailArchiva which is an ediscovery package, runs very well. Anyhow, yesterday the boss tells me he wants to do something else so the last thing I did was an apt-get update and an apt-get upgrade, no errors were observed, I seem to remember like 8 updates were available, this is what I've normally done in the past to keep it current. The last thing I did after that was shutdown -r now.
This morning I can't get into the box, I reconnected a monitor to it and this is the error I'm getting when it stops after about 9 lines into the boot process;
modprobe: FATAL: Error inserting padlock_sha (/lib/modules/2.6.32-24-server/kernel/drivers/crypto/padlock-sha.ko): No such device.
This is a mystery to me, the system is not encrypted. The only stuff that is belongs to MailArchiva. Anyhow someone evidently made off with my install cd so I am downloading another to see if I can repair this but I have no idea what broke.
After boot, Fedora 14 gives the following message, on my HP Pavilion dv2701tx laptop.
Starting udev: udevd-work[454]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/power/level} for writing: No such file or directory
I suspect it has something to do with my Authentec AES2501 fingerprint reader. I need it to work for my project, but it's not working, even though it works fine in the Windows 7 installed on my system.
I have presently a (working) boot dedicated partition, where grub stuff resides, but I want to change it to a common "/boot" folder in the root partition (in a different hdd). For some reason I can't do it. The first thing I did was to copy all the things that are in the boot partition to a boot folder on the root partition. After that, I tried: grub-install /dev/hdc1 (which is odd but it's where the root partition actually is)
When I did it from the linux I have installed on my hdd, it actually did something, I don't remember all the output (except that there was something about it not being able to access hda, which is oddly the dvdrom), but it didn't work. From a live CD, the same command (grub-install /dev/hdc1) is answered with: Could not find device for /boot: Not found or not a block device. From grub's own prompt, the things are more or less the same. First of all, it does not find stage1, even though I did copy the content from the boot partition to a boot folder in the root partition.
I tried to proceed, anyway, with root (hd1,0) and setup (hd1,0) (which is /dev/hdc1, according with the "geometry" info given by grub). "Root" is accepted, but "setup" is answered with: Checking if "/boot/grub/stage1" exists... no Checking if "/grub/stage1" exists... no Error 2: Bad file or directory type But the files are there. I can't "cat" the menu.lst from grub though, unlike with the actual working boot partition. The same error message. From the terminal, however, it's all there. I tried with /dev/hdc1 both mounted and unmounted, the same message. So, basically I have two questions, I guess:
1 - can I really do this sort of thing running a linux installed on a hdd, rather than a live cd, or is the live cd preferable for some reason?
2 - what am I missing?
(A note that may worth making is that I'm using the soon-to-be deprecated grub version, 0.9 or something, not grub2. I think it shouldn't be a problem since I've installed the system with the old version to begin with, but that may be irrelevant, I don't really know)
Okay, so on occasion when I boot into ubuntu I get this error
[mount: mounting /dev /root/dev failed: no such file or directory]
[mount: mounting /dev /root/sys failed: no such file or directory]
[mount: mounting /dev /root/proc failed: no such file or directory]
[code]...
I get the error when I open any of the kernel versions or any recovery mode. Ubuntu 10.10 Desktop is the only OS installed on the computer, which is a Lenovo S10-3. I can eventually get it to go away, sometimes by repeatedly unplugging it and plugging it back in, and sometimes I will boot into GParted, do nothing, then restart and it will work.I have found some solutions online, but all of them involve the error happening as a result of dual booting with Windows.I have made no major system changes recently, so I can't see anything like that being the problem.
This morning when attempting to upgrade (aptitude update; followed by aptitude safe-upgrade) my system I started receiving the following error:
Preconfiguring packages ...
(Reading database ... dpkg: unrecoverable fatal error, aborting:
unable to open files list file for package `apache2-doc': Stale NFS file handle
E: Sub-process /usr/bin/dpkg returned an error code (2)
A package failed to install. Trying to recover:
It doesn't seem to matter what repository I use or what particular package that I attempt to upgrade (all or just a single package). (In particular, apache2-doc is not even a package being upgraded, although it is installed on the system.) I have rebooted, run apt-get clean, run apt-get check, etc. to no avail. I am running a standard Debian (5.0.2/Lenny) desktop PC and am not running any NFS processes, client or server.
Recently I have downloaded TBB and I want to run a program using its libraries. But I encountered the following error: Linker: fatal error LNK1104: cannot open file 'tbb_debug.lib'
View 1 Replies View RelatedI want set up VPN on my VPS but when i try to turn on tun/tap i see:
:/lib/modules# modprobe tun
FATAL: Could not load /lib/modules/2.6.18-194.17.1.el5.028stab070.7PAE/modules.dep: No such file or directory
os : debian 5
(folder lib/modules is empty)
I have been following this tutorial [URL]. When I get to the end of the installation and try to install GRUB to the /boot partition I have set up it throws a fatal error at me. No explanation other than it can't write to the specified location. I double checked all the partition settings which were the same as the tutorial then skipped the GRUB installation and finished. The only thing I can think of that might be wrong is that the 250MB partition size specified for /boot in the tutorial is too small.
View 2 Replies View Relatedafter I installed graphical ATI drivers for my Ubuntu distribution version 10.10 running on a Acer laptop, it told me to restart and since then I cannot boot GNOME. Whenever I start the laptop, I just get a command prompt with username and password. I can browse through my files using changedir and other commands. After logging in I typed 'startx' and it gave me alot of errors:
Quote:
Fatal server error: AddScreen/ScreenInit failed for driver 0
(WW) fglrx: No matching Device section for instance (BusID PCI : 0@0 : 20 : 4) found
(EE) fglrx: No matching Device section for instance (BusID PCI : 0@0 : 20 : 4) found
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
[code]....
So I really regret downloading these drivers, is there any way to roll back to the old Ubuntu supported video drivers?
I have this old box that I used at school that I wanted to re-purpose and use. So i decided to that I wanted to run xp, ubuntu studio and slackware so I can learn about linux and do some other things with xp. I think I got through the installatiosa all fine and dandy, and I installed grub for my boot loader, I can boot into studio and xp, but I cant get into slackware. the grub boot menu is sorta funky too, it shows a generic and recovery mode for studio which is fine, and then another option for xp, some memory test boot option, but then for slackware it shows "Slackware Linux (Slackware 13.1.0) (on /dev/sda4) four times in a row. If I select any of them they all end up with some error; the third SW [slackware] option down the list of the repeated 4 allows me to sign into root, but when I type "startx" i get :
(EE) intel(0): No kernel modesetting driver detected
(EE) Screen(s) found, but none have a usable configuration
Fatal server error: no screens found
but thats with a lot of other text above that. if you need any more details, please dont hesitate to request for them. I'm going to take some time and cool down. I'm trying to get these three OSes running from one HD. I've partitioned the 80 gig drive as follows
Primary 40 G NTSF for XP
Primary 2G Linux Swap
Primary 16G Slackware
Primary 18 U Studio
Primary
I upgraded postfix to 2.8 today after the security bulletin from the list.
now I get the following error:
'postfix/local[2442]: fatal: unable to determine open file limit'
I can receive/send mail, it just wont let me deliver locally
uname output: 2.6.37-1-686 #1 SMP Tue Feb 15 18:21:50 UTC 2011 i686 GNU/Linux