I want set up VPN on my VPS but when i try to turn on tun/tap i see:
:/lib/modules# modprobe tun
FATAL: Could not load /lib/modules/2.6.18-194.17.1.el5.028stab070.7PAE/modules.dep: No such file or directory
os : debian 5
(folder lib/modules is empty)
Tonight I installed ubuntu 10.10 (32 bit) on an external usb harddrive with a dvd I burned and I used my older desktop. I disconnected all internal and external drives first so everything had to be put on the usb drive I selected (only option available). I used the option to load extra software, use the entire hard drive, and let the software do it's thing. I basically had no options where to put things and it didn't have much choice.
When I boot the usb drive on my laptop (win 7 64 bit) by telling the bios to boot to it first... I get an error: modprobe: FATAL Could not load /lib/modules 2.6.35-22 generic modules No such file or directory. This message appears twice and then it does boot into ubuntu and seems to work fine. I'm new to this OS so that is an uneducated guess but the things I have done seem to be working. So exactly what is this error referring too? Is there a way to fix the problem or do I just ignore it.
i try update new kernel and got this error when i try to actived tun/tap
Quote:
-bash-3.2# modprobe tun
FATAL: Could not load /lib/modules/2.6.18-164.15.1.el5.028stab068.9PAE/modules.dep: No such
[code]....
When trying to install my WiFi card's driver on Ubuntu 9.1, I run the make command and get the following error:make: *** /lib/modules/2.6.31-20-generic/build: No such file or directory
View 1 Replies View RelatedI've been trying to load my pcmcia network card driver "xirc2ps_cs" at startup with no success. I have added "modprobe xirc2ps_cs" to the rc.modules file but it doesn't load at startup. Curiously, though, if I execute rc.modules AFTER the machine has booted it will load the modules just fine. Just not during the boot up process. Thinking that hotstart might have been causing problems I've disabled hotstart (chmod -x) temporarilly to remove it from the picture, but there was no change.
View 5 Replies View RelatedI'm attempting to install a WLAN card driver from source, as that's all that's available.I'm getting:
make: *** /lib/modules/2.6.31.5-0.1-desktop/build: No such file or directory
Build appears to be a link pointing to "/usr/src/linux-2.6.31.5-0.1-obj/x86_64/desktop"."linux-2.6.31.5-0.1-obj" doesn't exist.
I then went agead to download ethernet realtek ethernet gigabyte card driver for my version of linux. I untar the file and i got the directory r8168-x.x.xxx.xx, a README file so i read the README file and it asked me to run ./autorun.sh which i did but i got the following error:
Check old driver and unload it.
Build the module and install
make: *** /lib/modules/2.6.32-71.el6.x86_64/build: No such file or directory. Stop.
[code]....
I've downloaded a linux driver for my wireless card (Realtek 8191SE), and whenever I try to make it it gives me the following error:make: *** /lib/modules/2.6.31.5-0.1-desktop/build: No such file or directory. Stop.
make: *** [all] Error 2I have installed make, pattern devel_basis devel_C_C++, kernel-source, linux-kernel-headers, gcc43, etc.I also tried linking them:# ln -s /usr/src/kernel-headers-2.6.31.5-0.1-desktop /lib/modules/2.6.31.5-0.1-desktop/buildln: creating symbolic link `./build': File existslinux-ynct:/lib/modules # ls2.6.31.14-0.1-debug 2.6.31.14-0.1-desktop 2.6.31.5-0.1-desktop2.6.31.14-0.1-default 2.6.31.14-0.1-xen
I am trying to install an application. But when I do a make it gives me this error . I tried to resolve it by installing kernel-sorce, kernel-devel packages But still cant seem to get rid of the error.
View 3 Replies View Relatedi'm using Centos 5.3 (2.6.27.10-grsec-xxxx-grs-ipv4-64 x86_64 kernel) and i got a problem with installing apf/configuring iptables. It seems that my kernel doesn't support Loadeble Kernel Modules. I'm receiving following message when catting /proc/modules: Quote: cat: /proc/modules: No such file or directory /sbin/modprobe -l FATAL: Could not load /lib/modules/2.6.27.10-grsec-xxxx-grs-ipv4-64/modules.dep: No such file or directory
View 4 Replies View RelatedHow do I configure my machine to load specific modules at startup.
View 1 Replies View RelatedHow do I get modules in the Kernel to load automatically at boottime? I''m specifically trying to get i810fb to load during the boot process. In Ubuntu, I just had to edit a file and update my initramfs. How do I do this in Fedora?
View 5 Replies View RelatedYet another problem I have. Suse is taking a while to learn but I swear I'm getting there. Can pritty much do everything by CLI now. I'm trying to run VMware Workstation 6.5 on OpenSuse 11.2, Gnome. I had it running fine but then needed to do a system re-install and upon installation this time I get a error saying it's is Unable To Build Kernel Module and reffers me to a error log. The error log says:
Code:
Mar 14 22:07:51.420: app| Log for VMware Workstation pid=6136 version=6.5.0 build=build-118166 option=Release
[code]....
trying to install the wi-fi drivers for RaLink rt3090. How can I reset the kernel modules to default so I can try again?
View 3 Replies View RelatedAfter a hiatus I found my machine to be down, but upon turning it on I get significant errors and dropped into emergency mode (see below). This machine wasn't very up-to-date to begin with, so I'm having difficulty determining the order in which to proceed. A couple naive checks and updates on my part are not working. The file system appears to be intact enough to "cd" around and "ls" to see that my files are all (seemingly) there. But the kernel modules aren't loading which is, you know, a problem.
The state I find it in is that it will begin booting to Linux 3.2 (which I know is no longer supported in testing, see below where I tried to update to 3.16), but fails quickly and puts me into emergency mode
Loading, please wait...
megasas: INIT adapter done
systemd[1]: Failed to insert module 'autofs4'
systemd[1]: Failed to open /dev/autofs: No such file or directory
systemd[1]: Failed to initialize automounter: No such file or directory
systemd[1]: Failed to set up automount Arbitrary Executable File Formats File System Automount Point.
...Then several drives show up as clean....
Running "journalctl -xb" shows that it can't mount the module even though it's there on the disk:
... systemd-modules-load[259]: could not open moddep file '/lib/modules/3.2.0-4-amd64/modules.dep.bin'
... systemd-modules-load[259]: Failed to lookup alias 'firewire-sbp2': Function not implemented
... systemd-modules-load[259]: could not open modeep file '/lib/modules/3.2.0-4-amd64/modules.dep.bin'
... systemd-modules-load[259]: Failed to lookup alias 'loop': Function not implemented
And yet, if I 'ls' that modules.dep.bin file, it's right where it's supposed to be, for the appropriate architecture and everything.
After that (in the journalctl output), it shows several things start up, but systemd-modules-load.service fails:
.. systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
.. systemd[1]: systemd-modules-load.service: Failed to start Load Kernel Modules
...and lots of things fail from systemd-udevd: failed to execute '/lib/udev/socket:@/org/freedesktop/hal/udev_ev_event': No such file directory.
"uname -a" shows
Linux <my hostname> 3.2.0-4-amd64 #1 SMP Debian 3.2.32-1 x86_64 GNU/Linux
I tried updating via apt to the Linux 3.16.0 kernel, but grub wasn't finding it in a way that effects the boot process, and no appropriate "vmlinuz-" file appears with the others on the boot partition. So, I tried switching to grub2 but the update-grub command produces many errors.... For now, grub2 still (attempts to) load the old kernel (3.2) with the same results as I was getting with the old grub-legacy.
Regarding the module-loading features, running "lsmod" shows about 30 lines:
Module
ext3
mbcache
jbd
dm_mod
usbhid
hid
[Code] ....
...I'm at the limit of what I know to check and/or try.
I updated alsa to the latest 1.0.22, however now the alsa modules refuse to load! When I do
Code:
rcalsasound restart
I get:
Starting sound driver: hda-intelWARNING: Error inserting snd_timer (/lib/modules/2.6.31.5-0.1-desktop/updates/alsa/acore/snd-timer.ko): Invalid module format
WARNING: Error inserting snd_pcm (/lib/modules/2.6.31.5-0.1-desktop/updates/alsa/acore/snd-pcm.ko): Invalid module format
[code]....
My audio codec is IDT 92HD81B1C5 and the problem is I can't get the mic to work properly with the stock alsa.
I've been playing with some intel server board and they provide a type of fakeraid which is called Embedded Server Raid Technology 2. Since Intel officially support RHEL and SLES on their servers, they provide drivers/modules for this fake raid (which supports raid 0, 1, 5 and 10). I have installed RHEL before on these severs and redhat's installer has the ability to load additional modules (via a boot command linux dd).
While intel doesn't provide the modules for other operating systems, they provide a library where people can build their own module for their kernel. I managed to build this module called 'megasr' (for now I've built it for kernel 2.6.32-24-generic which is my testbed at the moment but I would eventually build it for box i386 and amd64 for both server and desktop versions) and load it on a system which is installed on a single drive.
We are able to load it successfully and see the raid 5 as a single volume and access it (partition, format and copy data to it) and all its functions (work in degraded mode, rebuild, etc) work fine but my main goal is to actually install such volume as my main boot volume (similar to how its possible with RHEL or SLES). Is this possible? Load additional modules during the installation that will be present after the installation is finished?
My apache and wordpress were running fine till this morning. I ran updates via webmin,though I wasn't sure what those updates were for.
Then when I tried to access mysite.com, index.php downloads instead of opening.
I tried some troubleshooting and followed a form where it was advised to enable mod php5, so I did a2enmod php5 and tried to restart apache. Since I get this error Cannot load /usr/lib/apache2/modules/libphp5.so into server.
Code...
The problem is to get sound out of my PC. I've executed alsaconf few times and every time it generates following errors to /var/log/messages code...
Tried to get my VDR working again, but the dvb modules refuse to load code...
View 7 Replies View RelatedI recently started having this odd behaviour while using and loading cpufrequtils on boot, I don't know if it is happening to someone else.During boot I'm getting( when /etc/init.d/cpufrequtils invokes /etc/init.d/loadcpufreq to load the proper module):
Loading cpufreq kernel modules...FATAL: Error inserting speedstep_centrino (/lib/modules/3.0.0-1-amd64/kernel/drivers/cpufreq/speedstep-centrino.ko): No such device
FATAL: Error inserting pcc_cpufreq (/lib/modules/3.0.0-1-amd64/kernel/drivers/cpufreq/pcc-cpufreq.ko): No such device
[code]....
I have this kind of error:
Code: Select allr@prime:~$ systemctl status systemd-modules-load.service
● systemd-modules-load.service - Load Kernel Modules
Loaded: loaded (/lib/systemd/system/systemd-modules-load.service; static)
Active: failed (Result: exit-code) since Чтв 2015-08-20 08:07:38 EEST; 13min ago
Docs: man:systemd-modules-load.service(8)
man:modules-load.d(5)
Process: 150 ExecStart=/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)
[Code] .....
I was using v 8.10. It came to its end of life and I felt compelled to upgrade. I upgraded to v 9.04. All seemed well, but then I discovered that I had no sound. As a test, I booted up with the v 9.04 CD, using it as a live CD. I had sound, so it seems as though it should be possible for me to have sound from my upgraded v 9.04 too, provided I can make the necessary changes to it.
When using the live CD and opening the volume control, I get as the listed device "HDA ATI SB (Alsa mixer)". That doesn't appear when I open the volume control using my upgraded v 9.04. Instead, it says "Playback: Null Output (PulseAudio mixer)". Also, when I check for loaded modules when using the live CD, I get many with snd in their name, but nary a one when using the upgraded 9.04.
Is there some simple way for me to load the same modules in the upgraded 9.04 as are loaded by the live CD? I tried to figure out the answer to this by reading other threads, but was simply overwhelmed by the volume of material and often wasn't sure to which version of Ubuntu it applied.
I was wondering how can I determine among the modules loaded at boot which of them are really necessary and which are not, in order to reduce the boot process time and have a more "elegant" system start.
I know this theme is a little bit of complicated because it depends of the user's point of view and demand a high knowledge of which things are happening in your system but I need somewhere to start improving the performance of my debian system.
When I plug in my camera via usb I see this error
Code:
load-modules.sh: 'usb:v22B8p2B44d0001dcFFdscFFdp00icFFiscFFipFF' is not a valid module or alias name
This is happening on multiple machines. My udev version is 153. I don't think this is a permissioning issue because I've tried playing around with the udev rules/
I am trying to setup Slacware 13.1 x86_64 to a encrypted partition. I used the README_CRYPT.TXT howto : [URL] At the step when I create an initrd.gz I get this error: Quote: ERROR: No /lib/modules/2.6.33.4-smp kernel modules tree found for kernel "2.6.33.4-smp"
I tried to look into the directory and there was only modules under 2.6.44.3. So I tried to change the command into: Quote: mkinitrd -c -k 2.6.33.4 -m ext3 -f ext3 -r cryptroot -C /dev/sda2
This command was successful, but I don't know if this is alright. I made the changes in lilo.conf, add initrd = initrd.gz. This is all on unencrypted /boot partition. The boot=/dev/sda1 I also set for the unencrypted boot partition. When I boot the system I get a kernel panic:
[Code]....
I was trying to install VirtualBox through the YaST > Software Management but it is not working, someone in the forum told me that I have to download the OSE version and do it manual way. Finally I am able to start up VB but not able to use the network connection. Thus I am trying to do this:
/etc/init.d/vboxdrv setup. I get this error:
[code]...
When I type dmesg, it shows me a bunch of info which I don't know what should look for. When I type modprobe vboxnetflt, I get the error: FATAL: Error inserting vboxnetflt (/lib/modules/2.6.37.1-1.2-default/updates/vboxnetflt.ko): Invalid module format. what should I do in order to get my VB to be able to connect to the internet?
Is there a way to refresh the current configuration used by modprobe with an updated modules.conf file at the command line for Red Hat Linux 9.0?
View 1 Replies View RelatedSometimes I have problems with modules not loaded properly /etc/rc.d/rc.modules, is it recommended to add codes to load modules in other scripts in /etc/rc.d/.
View 1 Replies View RelatedI'm trying to install the nvidia drivers but it is not working.
lspci | grep VGA
02:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX - nForce GPU] (rev a3)
My xorg.conf looks like this:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
[code]...
And after that my X is not working. And when i try sudo modprobe nvidia I get this:
FATAL: Error inserting nvidia (/lib/modules/2.6.26-2-686/nvidia/nvidia.ko): No such device