I am a nebie to CentOS and I noticed that I don't have much fonts installed and display looks 10 year old. How others who use CentOS as a desktop manage with their fonts?
I noticed a link: [URL] and it mentions that Fedora and Redhat don't have support for True Type Byte Code Interpreters. Is it true? If so how do we enable it.
I'm running a Debian Wheezy system. There are a lot of characters I want to use from the U+1F*** set of characters. But when I use them or look them up in the character map, all I see is the square with the code inside. Is there some font package I can install from the repository that has better support for these characters?
E.g., when I am instant messaging my girlfriend, I like to use the HEAVY BLACK HEART character (â¤, U+2764). But there are a whole bunch of other "romantic" characters that are listed but not actually displaying for me, like the KISS MARK (U+1F48B), which I would like to use. These characters apparently show up on her system, which is an android phone.
I have myopia. I read the documents with quite large font size (13). But some of chm viewer such as: kchmviewer, gnochm, xchm, ... open the .chm files with tiny font. I must click the Zoom in, larger button 2 --> 5 times to get the sastified font. Is there any chm viewer support setting for minimum font size?
View 7 Replies View RelatedI try to set up a 5 nodes cluster and a shared Coraid Storage with conga but it fails with "Shared Storage Support" checked.The message is:'A problem occurred when installing packages: Packages of set "Clustered Storage" are not present in available repository' and it is shown under every node on the next sceen after I submit.The pc where conga runs is on the same subnet (192.168.xxx.xxx) and it has the same /etc/hosts of the other nodes.In that pc runs a proxy too and the nodes go out through it (that pc has 2 NICs)Every node (2.6.18-128.1.14.el5-xen-x86_64) is patched whith the last yum update (this morning) the same is for the pc (2.6.18-128.1.14.el5).Every node has 4 NICs , 2 NICc towards the storage the others in bonding towards the WAN.Every node is exactly alike, they have been installed with the ks.cfg generated from the first node and they all have the support for Clustering, Virtualization, and Clustered Storage.
View 1 Replies View RelatedI'm setting up a raid 5 on several hard disks with a layer of lvm on top for good measure.I know the recent kernels support growing software raid, but since centos runs 2.6.18, I wanted to make sure it'll work. Does the centos kernel support growing raid devices?
View 1 Replies View RelatedI have been using SLES 10 SP1 so far with about 6TB Raid system without problems.I have upgraded the OS to CentOS 5.3 i386 and I have noticed the kernel can not recognize raid system larger than 2TB.Is there any parameters that I have to set ? or the i386 distribution simply does not support larger raid, so I have to use x86_64 version, instead?
View 1 Replies View RelatedI am running a CentOS 5.5 system which does NOT support VT Technology, so I am unable to use Xen HV. I am very happy with OpenVZ other than the fact that it doesn't support Windows, only Linux.I'd like to have VMWare Server 2.x installed, but it appears that OpenVZ changes the Kernel to, in my case, 2.6.18-194.3.1.el5.028stab069.6. The default kernel on my system is 2.6.18-194.3.1.el5.i386.If I change grub to load 2.6.18-194.3.1.el5.i386, VMWare will work but OpenVZ will not. If I change grub to load 2.6.18-194.3.1.el5.028stab069.6, OpenVZ will work, but VMWare will not.If I try to run /usr/bin/vmware-config.pl while in the 2.6.18-194.3.1.el5.028stab069.6 kernel, I get an error of:
None of the pre-built vmmon modules for VMware Server is suitable for your running kernel. Do you want this program to try to build the vmmon module for your system (you need to have a C compiler installed on your system)?Using compiler "/usr/bin/gcc". Use environment variable CC to override.
What is the location of the directory of C header files that match your running kernel?[/usr/ src/ linux/ include]I'm so lost as what to do now..is there anyway I can compile both of the kernels together somehow?
I installed OO3.1.1. I cannot find TimesNewRoman font. Also in the system is not visible. Where can i install those fonts?
View 1 Replies View RelatedFrom inside my bash script, is there a way to increase my Xdialog default font size? If not, is there any other way to do it? I found a commercial program using Xdialog with instructions on increasing the font size, but they did not say how they did it. But, it does mean it can be done:[URL]...
View 3 Replies View RelatedWill Redhat support CentOS under any circumstances? I have heard at my employer that if you setup you system with CentOS and then on down the line you find you need RHEL support that you can purchase a license from Redhat and they will support your CentOS installation.Is that an official policy at Redhat? Unofficial? Or completely untrue?
View 2 Replies View RelatedI use CentOS and i need to set resolution or font size so that i can see more lines of logs at a time on the main console of my CentOS box.
View 3 Replies View RelatedEssentially I have found this guide, but it is for miktex, i need a guide for texlive on Debian/Ubuntu which will not pollute dpkg installed texmf.
I'm interested in converting TrueType font to be usable in (pdf)(La)TeX.
All the power google turn up just stuff f relating how to install microsoft fonts or do stuf on MikTeX.
I CANNOT USE XeLaTeX!!! I use pstricks and the font must be available in plain TeX! Otherwise my document looks inconsistent!
Most of my work happens in a terminal, so I need a clear, readable font. I've settled a while ago on Terminus [URL]..., which works wonders for me. I added XTerm*faceName : Terminus in my ~/.Xdefaults, and I do get the Terminus font. Unfortunately, a lot of Unicode glyphs are missing (mathematical symbols, greek and hebrew letters), displaying as little square blocks instead.
If I remove the faceName entry, the default configuration seems able to display most of the glyphs (including math, greek, hebrew, runic, and whatever else), but the default font is much harder to read.
A google search hints that it should be possible to use Terminus as the default font, and fallback to (an)other one(s) for missing glyphs, but provides no further explanation. I've seen documentation that recommends Bitstream Vera Sans as a fallback, but it lacks the glyphs I need too; I don't know how to identify the default font used by xterm either, I had a look at /usr/share/X11/app-defaults/XTerm, but all I can find are generic references to old pre-fontconfig font names.
Using Gentoo Linux, fontconfig and xterm are up to date, USEs trutype and unicode enabled, X.Org server 1.6.
Edit: I alternate between Ratpoison, Awesome and XMonad, without a desktop environment.
I can't change fonts in Firefox preferences (Content).
My OS is openSUSE 11.3, KDE 4.4.4. release 8.
Any type and size of font I use, nothing happens. It's still same font which I choose for the first time I've started Firefox afer installing openSUSE 11.3.
I tried to installed Centos5.4 version on Dell PC intel corei3 inspiron580s and succeeded but found some issues following below
1 Hardware issue for LAN driver ( Broadcomlink(TM)gigabit ethernet)
2 Display Driver not support and also missing Xorg.config file (i.e ., My Screen Starts from center of screen )
3. What is minimum configuration for centos 5.4 ?
my server is sun x4450.Memory is 64G RAMinstall CentOS 5.3 64bit.free -m only dispaly 32G RAM,but BIOS can display 64G RAM.how to setup support 64G RAM?
View 1 Replies View RelatedDoes this mean kmod-xfs is no longer needed in centos 5.4 x64?
View 2 Replies View RelatedI have done an initial CentOS install. I've now found out that the driver that I want to install (nVidia for GPU support) will not support the Xen feature that I installed. I'd like to avoid having to re-install completely. Is there a way to remove the Xen support that is documented somewhere?
View 2 Replies View RelatedWhat is the long term support plan for CentOS 5.2 (or indeed 5.3)? We are interested in changing our machines away from Scientific Linux 4.5, because support is ending for that OS within 12 months. So we need to make sure that a new OS choice is going to have support for a number of years.
View 3 Replies View RelatedA site -- to -- site vpn need NAT-T . But I don't know whether the Centos_5.2 support that function default, or I have to patch it by myself.If I should patch it all by myself, How to do it ? VPN suite: OPENSWAN KERNEL version : 2.6.18-92.1.22.el5 i686
View 1 Replies View RelatedAny official or 3rd party yum repo that supports gnugk (GateKeeper for VoIP)? I am trying to install gnugk in a centos 5 environment.
View 2 Replies View RelatedThis is a fresh install of CentOS 5.3 x86_64 with the following packages installed (using yum) as I have always done and has always worked in the past: httpd mysqld php php-mysql php-gd
However any pages requiring mysql fail and the following shows up in the httpd/error_log:
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/dbase.so' - /usr/lib/php/modules/dbase.so: cannot open shared object file: No such file or directory in Unknown on line 0
[Code].....
I need to recompile PHP with imap support.
Serwer info:
CentOS 5.3 64-bit (Final)
Apache: 2.2.11
PHP Version: 5.2.9
Quote:yum install php-imap
I've successfully compiled and installed PHP to run with nginx. But I could not use some jpeg functions from GD library. I've checked for libjpeg-devel and gd-devel and found that they had been installed, libjpeg.so is located at /usr/lib This is my configure command:
./configure --with-config-file-path=/etc/php --with-config-file-scan-dir=/etc/php/conf.d --disable-pdo --with-openssl --with-pcre-regex --without-sqlite3 --with-zlib --enable-bcmath --with-bz2 --enable-calendar --with-curl --with-curlwrappers --enable-exif --with-gd --with-jpeg-dir=/usr/lib --with-png-dir=/usr/lib --with-freetype-dir=/usr/lib --enable-gd-native-ttf --enable-gd-jis-conv --with-gettext --with-mhash --enable-intl --enable-mbstring --with-mcrypt --with-mysql --with-mysql-sock --enable-soap --enable-sockets --with-xsl --enable-zip
phpinfo() shows that gd is enabled with GIF and PNG supports but without JPEG.
is there commerical paid support for centos i know fedora is supported by redhat
View 2 Replies View RelatedI have read in the release notes that there is no SuSe Linux (SLES 10) support in Cent OS 5.x KVM or even for that matter in Xen.
Does that mean SUSE will not run at all or will there be nobody to support me? A complete YOYO scenario!
Does anyone have experience with running SuSe on CentOS KVM?
Actually I want to log a bug but I don't really know what package to log it against. The problem is that by default Pango is choosing the AR PL UMing CN as the font to render Japanese text when the current font doesn't have Japanese glyphs. But AR PL UMing CN is a Chinese font, so Chinese glyphs for kanji characters (e.g., 覚) are displayed. This is jarring and confusing for Japanese readers.
This situation mostly arises when you have mixed English and Japanese text. Some applications (for instance Firefox) will allow you to select a font for Asian text. Thus if the text contains only Asian characters it will use the font you select, rather than what Pango would have selected. But if it is a mix of English and Japanese, you end up with the wrong glyphs.
Other environments (like gnome-terminal, or a gedit) have difficulties as well. Since the primary interface requires mono spaced roman characters you run into difficulty selecting fonts. Most Japanese fonts only have proportional roman characters. This means that if use a nice roman font and use Japanese text (for instance file names), you end up with Chinese glyphs. What I want is a mechanism that will work across all of Gnome for selecting the font I want to use for Chinese characters. That way I can choose either Japanese or Chinese glyphs.
I realize this is low priority. It only bugs me a little, but many of my Japanese colleagues are put off from using Ubuntu because they are confused by the Chinese glyphs that pop up on my screen from time to time. As I said, I'd like to file a bug, but I'm not sure against what package...
So as the title says, I am looking for your experiences in this issue, because CentOs and RHEL are very, VERY similar, it is basically the same, so I was wondering, if I can get official support from Autodesk if I'll use their software on CentOs instead on RHEL.
View 2 Replies View RelatedI have a dvr card that is a Softlogic 6x10 line of MPEG-4 codec card that uses mpeg 4. This is the driver that they recommend that I use but it is for ubuntu. Is there a Centos 5.5 equivalent? [URL]. This is the card: [URL].
This is what appears in lspci:
PHP Code:
03:06.0 Multimedia video controller: Unknown device 9413:6010
I found this on the net: [URL] and installed
PHP Code:
kmod-video4linux-PAE-0.0-7.20100410.2.el5.elrepo.i686.rpmkernel-ml-PAE-2.6.37-0.3.el5.elrepo.i686.rpm
I get this error when I run a modprobe budget_av:
PHP Code:
modprobe budget_avWARNING: Error inserting videobuf_dma_sg
(/lib/modules/2.6.18-194.32.1.el5PAE/weak-updates/video4linux/videobuf-dma-sg.ko):
Unknown symbol in module, or unknown parameter (see dmesg)WARNING:
Error inserting v4l1_compat (/lib/modules/2.6.18-194.32.1.el5PAE/weak-updates/video4linux/v4l1-compat.ko):
Unknown symbol in module, or unknown parameter (see dmesg)WARNING:
Error inserting videodev (/lib/modules/2.6.18-194.32.1.el5PAE/weak-updates/video4linux/videodev.ko):
Unknown symbol in module, or unknown parameter (see dmesg)WARNING:
Error inserting saa7146_vv (/lib/modules/2.6.18-194.32.1.el5PAE/weak-updates/video4linux/saa7146_vv.ko):
Unknown symbol in module, or unknown parameter (see dmesg)FATAL:
Error inserting budget_av (/lib/modules/2.6.18-194.32.1.el5PAE/weak-updates/video4linux/budget-av.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
I have to deploy Linux server(apache, php , Mysql) for production environment. whether I should go for RHEL5 or CENTOS5 and why.... Also if RHEL5 then Can use RHEL5 without license if I dont want support from Red Hat.
View 6 Replies View Related