I'm testing a support ticketing system (osTicket), and am trying to set up the server so it can send and receive messages using an external email account so it will, you know, work.When you try to add an email account, it spits out the error "IMAP doesn't exist. PHP must be compiled with IMAP enabled." in the web interface.So apparently IMAP isn't enabled in PHP. And apparently I have to recompile PHP to add that particular function. Um... how i do that? i not so good with computer
I tried to run some virtual machine using Virtual Machine Manager but the guest OS (windows server 2003) was not able to "see" the rest of my network. I believe VMM did some NAT-ing (192.168.122.x subnet) so i'm not able to "see" my network. I tried various network setting in VMM but couldnt get it to pull my network IP (192.168.1.x subnet).So i installed VirtualBox as a work around because i know VB work when i tried it on my windows machine. I ran into some issue getting VB to run, i think it was that i need to compile the kernel to "optimize" it for VB. I am fairly new to linux so that the impression that i get when i research for the fix to get VB working. In some of the forum post people suggest few things and it seem to me like it to compile the kernel. After a few hours of working i finally got it to compile but the computer crashed during compilation.
I am guess what happened is that i was trying to optimize the kernel for VB but the version of kernel i was using (2.6.18-164.6.1.el5xen) is already optimized for xen (VMM) so it crashed. I am looking to restore or recompile the 2.6.18-164.6.1.el5xen kernel. I am not sure if this is the right thing to do to fix it. With my limited knowledge of linux that all i can think of.
I have recompiled MONO 2.4 RPM's from the OpenSuSE buildservice. I need it for Monodevelop and some .NET stuff So i need to recompile the package gtk-sharp2 LANG=C rpmbuild --rebuild /home/darko/Desktop/gtk-sharp2-2.10.0-6.el5.centos.src.rpm
I'm looking for a method to sync my calendars on my IMAP server with both my Thunderbird/Lightning any my Blackberry. I found "IMAP Calendar Proxy" here recently, but it has been inactive for 5 years. I've seen people suggesting the use of services like Plaxo and such, but I don't like the idea of a third party messing with my calendars and contacts. Also, I've had to remove several viruses from computers with Plaxo, and I'm not sure if it in itself is a virus or not..... It certainly is a thorn in my side as is. This is for my personal IMAP server, so I'd prefer a free solution even if it is more difficult to install than a paid version. I mainly need it to just sync my calendar to my Blackberry and Thunderbird and couldn't care less about the contacts.
I've been Googling for things for quite some time now, and haven't really found anything that says that it will work with Blackberry and Thunderbird. They really only give a sense of maybe with nothing really defined. I can put on an Ubuntu server to sync everything? I don't want to leave my computer on all the time, and RIM has yet to come out with something decent to sync Blackberries and Thunderbird properly as far as I know.
how to install Courier IMAP server and they all say the same thing, but they keep giving me problems.URL... is a link to the page I'm working on.I created the user, edited sudoers manually since I can't effectivly use visudo in the terminal since I don't know how to save. I also made sure that I restarted after I edited it in order to make sure it took effect. I used su compileuser and just logging in as compileuser and opening a terminal. After I made the user and edited that file, I created the directory mentioned and ran the command to create .rpmmacros. After that I got to work on wgetting the files and installing them and what not. The first one compiled and installed and so did the last one. The command "rpmbuild -ta courier-imap4.6.0.tar bz2" would not go though properly. This one I need to run as a non-root user and I've tried using every way possible to be as distant from root as possible, but it still gives me this at the end.
The server I'm running is virtually stock CentOS - it's running on a xen virtual host, started as CentOS 5.1 (32 bit) when that was fresh, it's at 5.5 now and updated nightly. All packages except postgresql and php are from CentOS and EPEL.
I'm running dovecot on it, and for long time, squirrelmail connecting via localhost was good enough. All external ports were firewalled by the CentOS firewall (just 25,80,443,custom ssh are currently open).
Now I need to allow an external imap client to connect.
I have generated ssl key and configured the dovecot configuration and it should be good to go, but gosh dangit, I can't remember how to open the port in the configuration.
I did it before when I set up ssh to run on a non standard port after I got sick of constant brute force attack on port 22, but I can't recall what I did and the various tutorials I find online all tell how to do it with the GUI tool, but I don't have any GUI stuff installed.
Is I'm pretty sure what I used to open up my custom > 1024 ssh port, but I can't remember how I used it to open that port and it doesn't seem intuitive. Also, do I need to use 993? I'd almost rather use something custom above 1024, as long as thunderbird supports it (don't care about any other mail client)
Finally, my smtp server is postfix and port 25 is already open (but not an open relay, I check it about every 3 months). For requests to send mail from a client, I would really like some authentication of some type - as in only relays for IP addresses that have recently successfully logged in the secure imap port.
Small server running 5.3 - stock postfix configured to use Maildir. Dovecot configured but both pop and imap ports blocked by firewall. Access to mail is via Squirrelmail via https. Configured to virus scan via ClamAV. Works just fine. Now I want to add procmail filtering. So I create these two files - ~/.forward and ~/.procmailrc in my user home dir: "|exec /usr/bin/procmail -f- || exit 75 #mpeters"
I am administrating a server with CentOS installed. It came with qmail and courier-imap preinstalled, and Plesk.I need to manually add email accounts outside of Plesk, because my 1-domain Plesk license only allows the creation of one email address (yes, it sucks).
When I say add email account I mean creating a new email address, have email for that address be stored in its maildir, and have a corresponding imap (and hipefully also pop3) account that will be able to read that mail. All this with virtual domains.I've already found out how to create the new email addresses for qmail, so that email for the new email address is being delivered correctly. Now I need to create the imap/pop3 accounts for courier.
For the qmail part, I create a folder in in /var/qmail/mailnames/virtualdomain.org/username and a maildir called Maildir inside it. This is how the first mail address was created by Plesk and i'd like to maintain the same structure. As I've said, the qmail part is already working, I need to get the courier-imap part to work. Ideally, it should accept login with both short (i.e. myuser) and long (i.e. firstname.lastname@example.org) user names.
Currently the only authentication module that is enabled in courier-imap is authpsa, which is Plesk's authentication module.in order to add more authentication modules, do I just need to add them to the authentication module list in /etc/courierimap/imapd, or do I need to reinstall courier-imap with support for such authentication modules? I thought I would only need to add them to the list, but I've noticed that the /usr/lib/courier-imap/authlib/ folder only contains a binary called "authpsa". Does that mean that other authentication modules are not even installed? If so, can I install them without reinstalling courier?
The second question is, what would be the most recommended authentication module that would make it easiest to create new email addresses/accounts from the command line? I need to be able to write a shell scripts capable of creating a new email address with all that is needed, and I'd like to keep this script as simple as possible, so for example I'd avoid mysql-based authentication as it sounds rather complicated. And the last question is, if I do need to reinstall courier-imap, how can I install a package without recompiling it? Will my one existing mailbox keep working?
Having my Diploma Final Project on setting up a virtual mail server within Local Area Network (LAN) only. I had follow this how-to [URL] and complete up to squirrealmail web mail. I added two new user to try on sending and receiving mail. It works. I run CentOS on VMplayer. I using my laptop to do all the stuff, the laptop default OS is windows 7, I install VM player on it and run CentOS inside the VM Player.
I want to do testing on Windows 7 side by installing Thunderbird email client program, I want to connect to mail server with SMTP, IMAP/POP3 using the email service. I have problem while setting up user account on Thunderbird, Thunderbird seems like cannot detect my CentOS mail server. How? Do I have to do any other configuration on CentOS? Any DNS? Port number for IMAP, POP3 or SMTP?
Sometimes during bootup I get the following error:Starting Dovecot Imap: Fatal: listen(995) failed: Address already in useI tried to figure out what I could with the command lsof -i :995 and this was my output:COMMAND PID USER FD TYPE DEVICE SIZE NODE NAMErpc.mount 2936 root 7u IPv4 9201 TCP *:pop3s (LISTEN)When the system boots without the dovecot error the output of losof -i :995 is as follows:
COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME dovecot 3079 root 8u IPv6 9419 TCP *:pop3s (LISTEN) pop3-logi 3157 dovecot 1u IPv6 9419 TCP *:pop3s (LISTEN)
I try to set up a 5 nodes cluster and a shared Coraid Storage with conga but it fails with "Shared Storage Support" checked.The message is:'A problem occurred when installing packages: Packages of set "Clustered Storage" are not present in available repository' and it is shown under every node on the next sceen after I submit.The pc where conga runs is on the same subnet (192.168.xxx.xxx) and it has the same /etc/hosts of the other nodes.In that pc runs a proxy too and the nodes go out through it (that pc has 2 NICs)Every node (2.6.18-128.1.14.el5-xen-x86_64) is patched whith the last yum update (this morning) the same is for the pc (2.6.18-128.1.14.el5).Every node has 4 NICs , 2 NICc towards the storage the others in bonding towards the WAN.Every node is exactly alike, they have been installed with the ks.cfg generated from the first node and they all have the support for Clustering, Virtualization, and Clustered Storage.
I'm setting up a raid 5 on several hard disks with a layer of lvm on top for good measure.I know the recent kernels support growing software raid, but since centos runs 2.6.18, I wanted to make sure it'll work. Does the centos kernel support growing raid devices?
I have been using SLES 10 SP1 so far with about 6TB Raid system without problems.I have upgraded the OS to CentOS 5.3 i386 and I have noticed the kernel can not recognize raid system larger than 2TB.Is there any parameters that I have to set ? or the i386 distribution simply does not support larger raid, so I have to use x86_64 version, instead?
I am running a CentOS 5.5 system which does NOT support VT Technology, so I am unable to use Xen HV. I am very happy with OpenVZ other than the fact that it doesn't support Windows, only Linux.I'd like to have VMWare Server 2.x installed, but it appears that OpenVZ changes the Kernel to, in my case, 2.6.18-194.3.1.el5.028stab069.6. The default kernel on my system is 2.6.18-194.3.1.el5.i386.If I change grub to load 2.6.18-194.3.1.el5.i386, VMWare will work but OpenVZ will not. If I change grub to load 2.6.18-194.3.1.el5.028stab069.6, OpenVZ will work, but VMWare will not.If I try to run /usr/bin/vmware-config.pl while in the 2.6.18-194.3.1.el5.028stab069.6 kernel, I get an error of:
None of the pre-built vmmon modules for VMware Server is suitable for your running kernel. Do you want this program to try to build the vmmon module for your system (you need to have a C compiler installed on your system)?Using compiler "/usr/bin/gcc". Use environment variable CC to override.
What is the location of the directory of C header files that match your running kernel?[/usr/ src/ linux/ include]I'm so lost as what to do now..is there anyway I can compile both of the kernels together somehow?
Will Redhat support CentOS under any circumstances? I have heard at my employer that if you setup you system with CentOS and then on down the line you find you need RHEL support that you can purchase a license from Redhat and they will support your CentOS installation.Is that an official policy at Redhat? Unofficial? Or completely untrue?
I have done an initial CentOS install. I've now found out that the driver that I want to install (nVidia for GPU support) will not support the Xen feature that I installed. I'd like to avoid having to re-install completely. Is there a way to remove the Xen support that is documented somewhere?
I have a asus M51 Se that not work with 4GB of memory ram, due to a bug of bios. Only work with one slot of 2GB. I find this link https://bugs.launchpad.net/ubuntu/+s...ux/+bug/316079 that help to solve my problem. But for that I have to change a file.
My question is I need to recompile the kernel that I have? if yes, how can i make that without installing other kernel.