I have done an initial CentOS install. I've now found out that the driver that I want to install (nVidia for GPU support) will not support the Xen feature that I installed. I'd like to avoid having to re-install completely. Is there a way to remove the Xen support that is documented somewhere?
View 2 RepliesI try to set up a 5 nodes cluster and a shared Coraid Storage with conga but it fails with "Shared Storage Support" checked.The message is:'A problem occurred when installing packages: Packages of set "Clustered Storage" are not present in available repository' and it is shown under every node on the next sceen after I submit.The pc where conga runs is on the same subnet (192.168.xxx.xxx) and it has the same /etc/hosts of the other nodes.In that pc runs a proxy too and the nodes go out through it (that pc has 2 NICs)Every node (2.6.18-128.1.14.el5-xen-x86_64) is patched whith the last yum update (this morning) the same is for the pc (2.6.18-128.1.14.el5).Every node has 4 NICs , 2 NICc towards the storage the others in bonding towards the WAN.Every node is exactly alike, they have been installed with the ks.cfg generated from the first node and they all have the support for Clustering, Virtualization, and Clustered Storage.
View 1 Replies View Relatedwhen I installed network sharing I accidentally installed file sharing for Windows networks to. How can I remove windows networks file sharing and keep only ubuntu's own network file sharing?We have wireless network and only Ubuntu machines connected to it
View 2 Replies View RelatedI'm setting up a raid 5 on several hard disks with a layer of lvm on top for good measure.I know the recent kernels support growing software raid, but since centos runs 2.6.18, I wanted to make sure it'll work. Does the centos kernel support growing raid devices?
View 1 Replies View RelatedI have been using SLES 10 SP1 so far with about 6TB Raid system without problems.I have upgraded the OS to CentOS 5.3 i386 and I have noticed the kernel can not recognize raid system larger than 2TB.Is there any parameters that I have to set ? or the i386 distribution simply does not support larger raid, so I have to use x86_64 version, instead?
View 1 Replies View RelatedI am running a CentOS 5.5 system which does NOT support VT Technology, so I am unable to use Xen HV. I am very happy with OpenVZ other than the fact that it doesn't support Windows, only Linux.I'd like to have VMWare Server 2.x installed, but it appears that OpenVZ changes the Kernel to, in my case, 2.6.18-194.3.1.el5.028stab069.6. The default kernel on my system is 2.6.18-194.3.1.el5.i386.If I change grub to load 2.6.18-194.3.1.el5.i386, VMWare will work but OpenVZ will not. If I change grub to load 2.6.18-194.3.1.el5.028stab069.6, OpenVZ will work, but VMWare will not.If I try to run /usr/bin/vmware-config.pl while in the 2.6.18-194.3.1.el5.028stab069.6 kernel, I get an error of:
None of the pre-built vmmon modules for VMware Server is suitable for your running kernel. Do you want this program to try to build the vmmon module for your system (you need to have a C compiler installed on your system)?Using compiler "/usr/bin/gcc". Use environment variable CC to override.
What is the location of the directory of C header files that match your running kernel?[/usr/ src/ linux/ include]I'm so lost as what to do now..is there anyway I can compile both of the kernels together somehow?
The bad news comes that active support for Mint6 is set to end Apr. 30. The worse news is I don't know what to do about it. Complicating this is that I have about 5 drive partitions and duplicate Mint6 operating systems because of password problems and just partitioning the drive and rebooting the OS instead of trying to fix the issue. I hear good things about Mint8, but my 80 Gig drive is getting pretty thin on partitions. I know there must be a way to safely remove the partitions and duplicate operating systems. I just don't know how to do it.
View 6 Replies View RelatedWill Redhat support CentOS under any circumstances? I have heard at my employer that if you setup you system with CentOS and then on down the line you find you need RHEL support that you can purchase a license from Redhat and they will support your CentOS installation.Is that an official policy at Redhat? Unofficial? Or completely untrue?
View 2 Replies View RelatedI tried to installed Centos5.4 version on Dell PC intel corei3 inspiron580s and succeeded but found some issues following below
1 Hardware issue for LAN driver ( Broadcomlink(TM)gigabit ethernet)
2 Display Driver not support and also missing Xorg.config file (i.e ., My Screen Starts from center of screen )
3. What is minimum configuration for centos 5.4 ?
my server is sun x4450.Memory is 64G RAMinstall CentOS 5.3 64bit.free -m only dispaly 32G RAM,but BIOS can display 64G RAM.how to setup support 64G RAM?
View 1 Replies View RelatedDoes this mean kmod-xfs is no longer needed in centos 5.4 x64?
View 2 Replies View RelatedI am a nebie to CentOS and I noticed that I don't have much fonts installed and display looks 10 year old. How others who use CentOS as a desktop manage with their fonts?
I noticed a link: [URL] and it mentions that Fedora and Redhat don't have support for True Type Byte Code Interpreters. Is it true? If so how do we enable it.
What is the long term support plan for CentOS 5.2 (or indeed 5.3)? We are interested in changing our machines away from Scientific Linux 4.5, because support is ending for that OS within 12 months. So we need to make sure that a new OS choice is going to have support for a number of years.
View 3 Replies View RelatedA site -- to -- site vpn need NAT-T . But I don't know whether the Centos_5.2 support that function default, or I have to patch it by myself.If I should patch it all by myself, How to do it ? VPN suite: OPENSWAN KERNEL version : 2.6.18-92.1.22.el5 i686
View 1 Replies View RelatedAny official or 3rd party yum repo that supports gnugk (GateKeeper for VoIP)? I am trying to install gnugk in a centos 5 environment.
View 2 Replies View RelatedThis is a fresh install of CentOS 5.3 x86_64 with the following packages installed (using yum) as I have always done and has always worked in the past: httpd mysqld php php-mysql php-gd
However any pages requiring mysql fail and the following shows up in the httpd/error_log:
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/dbase.so' - /usr/lib/php/modules/dbase.so: cannot open shared object file: No such file or directory in Unknown on line 0
[Code].....
I need to recompile PHP with imap support.
Serwer info:
CentOS 5.3 64-bit (Final)
Apache: 2.2.11
PHP Version: 5.2.9
Quote:yum install php-imap
I've successfully compiled and installed PHP to run with nginx. But I could not use some jpeg functions from GD library. I've checked for libjpeg-devel and gd-devel and found that they had been installed, libjpeg.so is located at /usr/lib This is my configure command:
./configure --with-config-file-path=/etc/php --with-config-file-scan-dir=/etc/php/conf.d --disable-pdo --with-openssl --with-pcre-regex --without-sqlite3 --with-zlib --enable-bcmath --with-bz2 --enable-calendar --with-curl --with-curlwrappers --enable-exif --with-gd --with-jpeg-dir=/usr/lib --with-png-dir=/usr/lib --with-freetype-dir=/usr/lib --enable-gd-native-ttf --enable-gd-jis-conv --with-gettext --with-mhash --enable-intl --enable-mbstring --with-mcrypt --with-mysql --with-mysql-sock --enable-soap --enable-sockets --with-xsl --enable-zip
phpinfo() shows that gd is enabled with GIF and PNG supports but without JPEG.
is there commerical paid support for centos i know fedora is supported by redhat
View 2 Replies View RelatedI have read in the release notes that there is no SuSe Linux (SLES 10) support in Cent OS 5.x KVM or even for that matter in Xen.
Does that mean SUSE will not run at all or will there be nobody to support me? A complete YOYO scenario!
Does anyone have experience with running SuSe on CentOS KVM?
So as the title says, I am looking for your experiences in this issue, because CentOs and RHEL are very, VERY similar, it is basically the same, so I was wondering, if I can get official support from Autodesk if I'll use their software on CentOs instead on RHEL.
View 2 Replies View RelatedI have a dvr card that is a Softlogic 6x10 line of MPEG-4 codec card that uses mpeg 4. This is the driver that they recommend that I use but it is for ubuntu. Is there a Centos 5.5 equivalent? [URL]. This is the card: [URL].
This is what appears in lspci:
PHP Code:
03:06.0 Multimedia video controller: Unknown device 9413:6010
I found this on the net: [URL] and installed
PHP Code:
kmod-video4linux-PAE-0.0-7.20100410.2.el5.elrepo.i686.rpmkernel-ml-PAE-2.6.37-0.3.el5.elrepo.i686.rpm
I get this error when I run a modprobe budget_av:
PHP Code:
modprobe budget_avWARNING: Error inserting videobuf_dma_sg
(/lib/modules/2.6.18-194.32.1.el5PAE/weak-updates/video4linux/videobuf-dma-sg.ko):
Unknown symbol in module, or unknown parameter (see dmesg)WARNING:
Error inserting v4l1_compat (/lib/modules/2.6.18-194.32.1.el5PAE/weak-updates/video4linux/v4l1-compat.ko):
Unknown symbol in module, or unknown parameter (see dmesg)WARNING:
Error inserting videodev (/lib/modules/2.6.18-194.32.1.el5PAE/weak-updates/video4linux/videodev.ko):
Unknown symbol in module, or unknown parameter (see dmesg)WARNING:
Error inserting saa7146_vv (/lib/modules/2.6.18-194.32.1.el5PAE/weak-updates/video4linux/saa7146_vv.ko):
Unknown symbol in module, or unknown parameter (see dmesg)FATAL:
Error inserting budget_av (/lib/modules/2.6.18-194.32.1.el5PAE/weak-updates/video4linux/budget-av.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
I have to deploy Linux server(apache, php , Mysql) for production environment. whether I should go for RHEL5 or CENTOS5 and why.... Also if RHEL5 then Can use RHEL5 without license if I dont want support from Red Hat.
View 6 Replies View RelatedI upgraded my OS from 5.2 to 5.3 through the system built-in updater. Then I found that I lost correct SCIM support for some applications. I was able to type Chinese and Japanese into aMSN and Skype when it was CentOS 5.2. But I can no longer do that now. Typing into some other applications still works. These applications include sylpheed, firefox, and open office....
View 3 Replies View RelatedHow to enable multiple language support in centos?
understand that we need to install scim (smart common input method)
but if I install and choose only one language, what should I do after installation
from http://www.centos.org/docs/4/4.5/rhel-ig-x8664-multi-en-4/s1-langsupport.html
I guess right now after i install scim, I'll still not able to view other language (Asian Language) web sites
I need to find a way to upgrade OpenSSH support to something more than the patched 4.3p2 which comes included in CentOS 5.3. Specifically I want to be able to use the Chroot functionality which was added in OpenSSH 4.8.
# The following directives force ben_files to become chrooted
# and only have sftp available. No other chroot setup is required.
Match user ben_files
[code]....
We have CentOS 5.3 and are using sendmail for outbound emails. We are trying to switch over to authsmtp service. Authsmtp requires sendmail built with SASL suport.
How do I find out if my sendmail has been built with SASL support? If it is not, is it easy to build it with SASL support?
Does CentOS 5.4 support Intel Q45 graphics chip? If it does not support, How do I install the driver manually?
View 1 Replies View RelatedI have CentOS 5.4 on AMD x64 and 64 bit Firefox 3.0.15
[root@aluva ~]# uname -a
Linux aluva.tarikida.com 2.6.18-164.6.1.el5 #1 SMP Tue Nov 3 16:12:36 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.0.15) Gecko/2009102918 CentOS/3.0.15-3.el5.centos Firefox/3.0.15
Even though I downloaded and installed Adobe Flash plugin, Flash pages are not displayed on the screen. I am seeing only blank area when going to [URL]
Package flash-plugin-10.0.32.18-release.i386 already installed and latest version
Package nspluginwrapper-0.9.91.5-22.el5.i386 already installed and latest version
Package nspluginwrapper-0.9.91.5-22.el5.x86_64 already installed and latest version
[code]...
I'm trying to have QuickTime playback support in Firefox. I did find some "compile from code" packages and some rpms but they apparently have quite a bit of dependencies, at least one of them had quite a lot! Since figuring out dependencies is one of YUM's main attractions I gave it a go with:
[root@localhost yum.repos.d]# yum search quicktime
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* addons: www.ontime1405.com
[Code].....