CentOS 5 :: Running A CentOS 5.5 System Which Does NOT Support VT Technology
Jun 3, 2010
I am running a CentOS 5.5 system which does NOT support VT Technology, so I am unable to use Xen HV. I am very happy with OpenVZ other than the fact that it doesn't support Windows, only Linux.I'd like to have VMWare Server 2.x installed, but it appears that OpenVZ changes the Kernel to, in my case, 2.6.18-194.3.1.el5.028stab069.6. The default kernel on my system is 2.6.18-194.3.1.el5.i386.If I change grub to load 2.6.18-194.3.1.el5.i386, VMWare will work but OpenVZ will not. If I change grub to load 2.6.18-194.3.1.el5.028stab069.6, OpenVZ will work, but VMWare will not.If I try to run /usr/bin/vmware-config.pl while in the 2.6.18-194.3.1.el5.028stab069.6 kernel, I get an error of:
None of the pre-built vmmon modules for VMware Server is suitable for your running kernel. Do you want this program to try to build the vmmon module for your system (you need to have a C compiler installed on your system)?Using compiler "/usr/bin/gcc". Use environment variable CC to override.
What is the location of the directory of C header files that match your running kernel?[/usr/ src/ linux/ include]I'm so lost as what to do now..is there anyway I can compile both of the kernels together somehow?
View 2 Replies
ADVERTISEMENT
Jul 31, 2009
I have Centos 5.3 on our server When I log-in in webmin I have a message "Warning - Your system is actually running CentOS Linux version 5.3." In the next line I have a button "Update Detected Operating System" My question is Do I need to click the link and update Detected operating system? If I do, is it going to change any configuration on our server?
View 2 Replies
View Related
Jun 24, 2009
I try to set up a 5 nodes cluster and a shared Coraid Storage with conga but it fails with "Shared Storage Support" checked.The message is:'A problem occurred when installing packages: Packages of set "Clustered Storage" are not present in available repository' and it is shown under every node on the next sceen after I submit.The pc where conga runs is on the same subnet (192.168.xxx.xxx) and it has the same /etc/hosts of the other nodes.In that pc runs a proxy too and the nodes go out through it (that pc has 2 NICs)Every node (2.6.18-128.1.14.el5-xen-x86_64) is patched whith the last yum update (this morning) the same is for the pc (2.6.18-128.1.14.el5).Every node has 4 NICs , 2 NICc towards the storage the others in bonding towards the WAN.Every node is exactly alike, they have been installed with the ks.cfg generated from the first node and they all have the support for Clustering, Virtualization, and Clustered Storage.
View 1 Replies
View Related
Oct 16, 2010
I'm setting up a raid 5 on several hard disks with a layer of lvm on top for good measure.I know the recent kernels support growing software raid, but since centos runs 2.6.18, I wanted to make sure it'll work. Does the centos kernel support growing raid devices?
View 1 Replies
View Related
May 20, 2009
I have been using SLES 10 SP1 so far with about 6TB Raid system without problems.I have upgraded the OS to CentOS 5.3 i386 and I have noticed the kernel can not recognize raid system larger than 2TB.Is there any parameters that I have to set ? or the i386 distribution simply does not support larger raid, so I have to use x86_64 version, instead?
View 1 Replies
View Related
Nov 9, 2009
I'm installing CentOS for the first time to run mythtv on (I previously used Fedora, but the new version cycle was too quick). As part of the instructions I'm using, I am told to run system-config-boot (to ensure that centosplus kernel is loaded on boot). The problem is, I cant find this option in my installation of CentOS. Another option I have is to manually edit the grub.conf file, but I'm not sure exactly how I should edit it.
View 2 Replies
View Related
Jun 9, 2011
is it possible to create a live cd or a cd/dvd installer from a running system.
View 2 Replies
View Related
Oct 16, 2009
Will Redhat support CentOS under any circumstances? I have heard at my employer that if you setup you system with CentOS and then on down the line you find you need RHEL support that you can purchase a license from Redhat and they will support your CentOS installation.Is that an official policy at Redhat? Unofficial? Or completely untrue?
View 2 Replies
View Related
Oct 30, 2009
I've got two USB webcams I'm trying to get running with CentOS 5.4 x86_64. I've downloaded and installed the gspca driver from http://mxhaard.free.fr/spca5xx.html. Running lsusb yields:
Bus 002 Device 003: ID 0ac8:307b Z-Star Microelectronics Corp. USB 1.1 Webcam
Bus 002 Device 002: ID 0ac8:307b Z-Star Microelectronics Corp. USB 1.1 Webcam
View 9 Replies
View Related
Feb 18, 2010
I am trying to install CentOS 5.2, and the installation ran out of disk space after running for about 2 hours.I checked the FAQ, and it said 1.2 GB. The disk is 3 GB. The default install was selected, and I think that it checks for sufficient available disk space before installing. Still, it ran for quite a while before announcing that it was out of disk space.The Installation Guide is not very helpful, since there is a blank page where the disk space requirement is supposed to be. I just picked the default installation. A search of the forums on "not enough disk space" did not return much.
View 13 Replies
View Related
Jun 15, 2011
I tried to installed Centos5.4 version on Dell PC intel corei3 inspiron580s and succeeded but found some issues following below
1 Hardware issue for LAN driver ( Broadcomlink(TM)gigabit ethernet)
2 Display Driver not support and also missing Xorg.config file (i.e ., My Screen Starts from center of screen )
3. What is minimum configuration for centos 5.4 ?
View 2 Replies
View Related
Feb 28, 2010
i wanna ask if it's possible to install centos on hard2 while am running centos on hard1 then after installation is complete boot from the second hard drive. i dont have physical access to the server, all i can is connect to it through SSH. so is it possible to install centos on the second hard drive from CLI! then boot from it?
View 1 Replies
View Related
May 18, 2010
I have a Dell E5400 laptop running parallels with guest OS of CentOS 5.4. My problem is when I'm connected via Ethernet all connections are good. When I go wireless, CentOS is dead via network connections. Now according to Dell, I have a DELL 1397 mini card as my wireless card. Searches on the web state that the dell 1397 is another name for Broadcom 43xx wireless card. So after following any information I retrieved from the forum on trying to get the wireless connection up, I'm still having problems. Here is the latest error trying to build a driver using the hybrid_wl software from broadcom:
make -C /lib/modules/`uname -r`/build M=`pwd`
make: Entering directory `/usr/src/kernels/2.6.18-164.15.1.el5-i686'
CC [M] /usr/local/src/hybrid_wl/src/shared/linux_osl.o
CC [M] /usr/local/src/hybrid_wl/src/wl/sys/wl_linux.o
CC [M] /usr/local/src/hybrid_wl/src/wl/sys/wl_iw.o
[Code]...
View 7 Replies
View Related
Jul 6, 2010
I managed to install xdebug from pecl, using the php-pear package from Centos base.
However, when trying to install PHPUnit i get an error saying I need at least PEAR >= 1.8.x
Has anyone managed to get a later version of PEAR running on Centos please?
View 1 Replies
View Related
Feb 27, 2011
I would like to build a bootable system image on an attached hard disk on a running CentOS machine.The hard disk would be moved to a headless server, where only SSH access would be available. It seems that all the documented install methods assume that the installation runs on the taget machine. In this case, I would like to create a bootable system image of CentOS on a running host system. The new install mage would generally have a newer version of CentOS than the running host system where the image is created. Also, I would prefer
to do a text-based install.
The reason for all this is that I have network access to several remote machines. I can ask disks to be moved between machines, but I have no physical access. In order to do software testing, I would like to have several system disks with different installed CentOS versions. It would be easer if I could build the system disks on one single machine. The hardware an all machines is very nearly identical.
View 1 Replies
View Related
Sep 1, 2010
I have seen that is possible to boot from a USB stick and use a USB memory as hard drive.I have a server enable to hold 6 sata drives 3.5", But I want to use the 6 drives and make a Raid-5 setup for backups 5 -1 spare. /boot cannot be on a raid-5 level 0 or 1. But I want to have redundancy for my OS, them I can install Centos on a Raid-1 using 2 disk, which let me only 4 for the raid 5. I will run a backup I want to have a lot of space.
Using 4 disk for raid-5 2 TB I will have 6TB no spare, no spare is not a good option at least I will prefer 1 spare.Well, I was thinking, the server MoBo have USB support, if I open the box I can see the small entrances, If Centos let me installed on a USB memory drive, can I trust a USB memory stick?t night with bacula.
View 2 Replies
View Related
Mar 30, 2011
I have some trouble with my hp workstation xw4400 with an ATI FireGL 3300 and the X-Server. There was no problem with the graphical install routine and the graphical boot works fine. But when the system changes into the login-screen, then it results in a black screen and a more or less frozen system.
View 3 Replies
View Related
Mar 17, 2010
I am an old days RH release user(from 6.x) and just switching back from Debian/Ubuntu to CentOS on some servers, but I can not understand the kernel update strategy currently enabled in CentOS.There are two boxes, with almost identical installation, but recently there was an auto update of kernel on one box. This auto update also seems to issue an auto reboot on the machine, which is unacceptable on server machines.
View 2 Replies
View Related
May 1, 2010
I am trying to do a basic install of CentOS 5.4 on my embedded computer. It is a Linutop 2 system with a AMD Geode 800MHz CPU and 512Mb Ram. Have installed an IBM 40Gb 2.5" HD for OS storage. I am doing the install procedure in text mode. Everything goes as planned until I get to the package selection.
1. Booting from (i386) DVD with "linux text" parameter.
2. Skipping media check.
3. Selecting "English" install language.
4. Selecting "DK-latin1" as keyboard layout.
5. Selecting "Remove all partitions and create default layout" and selecting "no" to modifying partition layout.
6. Selecting "yes" to configure "eth0" and mark to enable "IPv4" on boot.
7. Selecting DHCP for IP configuration and Manual host name.
8. Setting time zone to "Europe/Copenhagen".
9. Setting root password to a 16 digit alphanumeric pass-phrase.
10. De-selecting "Desktop - Gnome" (no other entries selected).
When the system is checking for dependencies, an exception
Traceback (most recent call first):
File "/usr/lib/python2.4/site-packages/yum/packageSack.py", line 426, in returnNewestByName
raise PackageSackError, 'No Package Matching %s' % ui_pats
File "/tmp/treedir.22057/instimage/usr/lib/anaconda/yuminstall.py", line 1072, in getBestKernelByArch
pkgs = ayum.pkgSack.returnNewestByName(pkgname)
[Code]...
View 1 Replies
View Related
Jan 26, 2011
have all ways been hiding in the background read not say a thinglets start well i look after 2 dell poweredge 2650 with 12 gig ram installed servers has been running fine onwell i though it was time to upgrade to 5 all went fine till reboot Memory for crash kernel (0x to 0x) not within permissible range ! well what i have been reading this is the norm for now What is mean by ignore it? LoLwell so i did the system keeps boot till i get to this linesbin/mingetty: /sbin/mingetty: cannot execute binary file alot, and it shows. INIT: Id "5" respawning too fast: disabled for 5 minutes ...so maybe its a memory issue so took 8 gig out left 4 in the system now it reboot alls good with only 4 gig of ram installed so is there a way to fix it to use all the ram can i get the system boot on 4 gig and then add the 8gig later on
View 7 Replies
View Related
Jan 1, 2011
I'm actually running Centos but I don't see a Centos forum yum stanza/url for the source repository please?
View 3 Replies
View Related
Nov 16, 2009
root@vz03i106 [~]# yum groupinstall "X Window System" "GNOME Desktop Environment"
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* addons: centosk2.centos.org
[code]....
View 3 Replies
View Related
Mar 30, 2011
Is it possible to list/find/compare the program versions on a Centos system, against Redhat/Centos Errata/Security/Bug lists? Sort of looking for a way to make sure that all the packages on a system are ok, and not a security risk-- Without having to update every package. A pseudo code, in my mind is:
[Code]...
View 2 Replies
View Related
Apr 10, 2009
I tried to run system-config-kickstart when after full installed CentOS 5.3,it report error as following,does anyone face the same problem?
[root@localhost ~]# system-config-kickstart
Loaded plugins: fastestmirror, kernel-module, priorities, protectbase,
: versionlock
[code]....
View 2 Replies
View Related
Aug 6, 2010
I am a long time Unix system admin and this one has got me stumped.When I try to run the system-config-network (or any of the system-config-xxx programs) from the links on the GNOME interface, I get a message pop-up that says, "Unknown error" and no additional information. I have also opened a terminal and run it from the command line (/usr/bin/system-network-config) and I get the same "Unknown error" pop-up. I was not the one who originally configured this server, so I am not sure of the history or how it might have been broken. I can't seem to find any debugging information or even any command line parameters that might give me a clue what the complaint is. There is no error number or any other helpful hint as to the cause of the problem.
I have been manually editing the config files so the server is up and running but it is tedious to manage the server without the GUI.Has anyone seen this before? I assume it is a configuration issue, but I am not sure where to look.uname -aLinux xxxxserver 2.6.18-164.15.1.el5 #1 SMP Wed Mar 17 11:30:06 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux/etc/redhat-releaseCentOS release 5.4 (Final)
View 3 Replies
View Related
Oct 29, 2009
I just ran a "yum update" on my CentOS 5.3 system. After a reboot, I noticed /etc/redhat-release show CentOS 5.4.
I thought yum upgrade was supposed to do that?
I wanted to simply patch my CentOS 5.3 system without turning it into CentOS 5.4 ... YET.
View 1 Replies
View Related
Sep 27, 2010
I have GParted installed, running openSUSE 11.3 with GNOME. When running GParted, it always grayed out most file system actions, supporting only hfs fully. This made no sense, as I had all the required packages installed for other file system support. However, I recently figured out how to get it to work. Using the installed menu button doesn't work, running "gnomesu /usr/sbin/gparted" doesn't work; to get it to work, I have to open up a terminal, type "su -" to log in as root, and then run gparted. The menu button and gnomesu both prompt for a password, so it should be running as root, but launching it through the root terminal is the only way to actually get it to work. Is one root different from another?
View 5 Replies
View Related
Jul 1, 2009
my server is sun x4450.Memory is 64G RAMinstall CentOS 5.3 64bit.free -m only dispaly 32G RAM,but BIOS can display 64G RAM.how to setup support 64G RAM?
View 1 Replies
View Related
Oct 16, 2009
Does this mean kmod-xfs is no longer needed in centos 5.4 x64?
View 2 Replies
View Related
Nov 27, 2009
I am a nebie to CentOS and I noticed that I don't have much fonts installed and display looks 10 year old. How others who use CentOS as a desktop manage with their fonts?
I noticed a link: [URL] and it mentions that Fedora and Redhat don't have support for True Type Byte Code Interpreters. Is it true? If so how do we enable it.
View 4 Replies
View Related
