CentOS 5 :: Firewire 1394 Modules Missing?
Nov 5, 2009
I am relatively new to CentOS. I attempted to install 5.3 with firewire several weeks ago and abandoned the install because it was taking too long to figure out the problems. I've had to revisit this and am having troubles with it. I was told that CentOS 5 has firewire 1394 support. When I did the typical install, it didn't physically (manually) install the video1394 and raw1394 modules. At boot up, my computer says that video1394 and raw1394 are "Module(s) not found". If I do <lsmod> I get (*snippet of o/p),
Module Size Used by
lockd 63081 0
sunrpc 145405 2 lockd
dm_mirror 24393 0
dm_multipath 24909 0
scsi_dh 11713 1 dm_multipath
[Code]...
I have found several other posts on the web that indicate I have to get the latest source files, but I do not know which one is the correct one or where to find it. Can anyone ponit me in the right direction? Is there anything else that I need to do?
View 3 Replies
ADVERTISEMENT
Feb 7, 2011
I want to enable Firewire for my audio interface. I'm using ubuntu 10.10 (64 bit version).
lspci returns that I have a Texas instruments chipset. But when I search the kernal log file with grep, there are no references to this. I've searched for 1394, found nothing. I've read the whole thing and found references to Firewire_core, but looking online, this appears to be something else? I may be wrong, but my device is not recognised anywhere, as far as I can tell.
I have checked in Synaptic that I have the 1394 libraries installed, I do. And checked their dependencies are present.
I know that the device and the mobo are fine, as windows identifies the device with no trouble.
Can anyone tell me, what universe and multiverse means in relation to Synaptic packages, and how to enable these settings?
Also, should I expect my Firewire device to appear in the Places menu when it is recognised? It hasn't as yet, and I don't seem to be able to select for use as an audio interface in Ardour, the linux studio-recording program.
Maybe I've missed it completely, but I think the key problem is thers no reference to 1394 in my Kernel log.
lspci returns
03:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
and the firewire_core stuff in the kernel.log
Feb 7 17:16:36 johnny-ubuntu kernel: [ 1.355772] firewire_ohci 0000:03:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[Code]....
View 1 Replies
View Related
May 25, 2010
I have a Maxtor external storage HDD with firewire (1394) interface.
When I connected it with my computer, which is running an up-to-date Debian squeeze, it was recognized as "/dev/sda1" and replaced the existing partition on the computer.
View 2 Replies
View Related
Dec 9, 2009
I recently added an external hard drive through a IEEE 1394 interface. I'm finding that during large file transfers the system slows to a crawl. It's still running: routing for example seems fine. But running applications are pretty much unusable: Apache is unusably slow, SSH login is very slow, etc. Currently I'm using the IEEE 1394 drivers from Axel's ATRpms but I'm pretty sure I saw this with the default kernel IEEE 1394 drivers too.
View 4 Replies
View Related
Oct 19, 2010
I have an IMAC (I7) that is running CENTOS 5.4 on and need to be able to mount a fireire disk automatically when plugged in. We can do this manually running: fdisk -l then choosing the correct disk and mounting it
mount /dev/scd1 mnt The problem we have is that this machine needs to go in a client office on the other side of the world and we need it to be idiot proof. I need to be able to autodetect and mount the disk like you would if it was running OSX. Obviously the hardware works, just the automount or autodetect does not work.
We've already commented out the blacklist in /etc/modprobe.d/blacklist-firewire Is there some other setting I need to automount the disk. Alternatively I'll have to write an application to perform the fdisk and mount as root, which I don't particularly want to do.
View 1 Replies
View Related
Aug 27, 2010
With CentOS-5.5, centos plus enabled, my LaCie external hard drives are not recognized even though connected and powered up before booting. I am logging in as root. Previous 2.4 kernel RHEL Enterprise 3 required a special scanning script which worked with this computer. This current system will not recognize the drives as hardware. On the other hand the drives with USB 2.0 ports automount connected with USB and also are recognized in the hardware list. what diagnostics to do to find out what layers / drivers are missing.
View 9 Replies
View Related
Jan 22, 2011
i couldn't find anything on google. So here is my problem: It's Debian GNU/Linux. I installed apache2 a few weeks ago, but due to some work I couldn't go on installing further things. Today I installed php5 and mysql. Everything seemed to work fine. I loaded an existing MyBB Board and WordPress Site onto the server and imported the mysql db. I can open the sites and login. However, there are problems. I think my problems are due to the compiled modules. Some are missing. I checked several sites. They all give me this listing:
Code:
apache2 -l
Compiled in modules:
core.c
mod_access.c
[Code]...
What should I do? How can I get the missing modules? Do I have to install apache again (how? remove - install? install what?)? Step-by-step instructions would be kind, because I don't know a lot about unix systems.
View 3 Replies
View Related
Aug 13, 2011
I'm having a problem getting firewire modules to load. Basically, I need firewire_core and firewire_ohci so I can use dvgrab. I tried the following:
Code:
[root@x:/]# modprobe firewire_core
[root@x:/]# modprobe firewire_ohci
But the modules aren't showing with lsmod:
[Code]...
View 5 Replies
View Related
Feb 11, 2011
I upgraded to the latest -current just like always. I do the kernel packages last. This time, the machine failed to boot, telling me that it could not find the kernel modules. Well, rats.
I booted with a slackware dvd, passed the huge.s kernel, and booted into /dev/sda7, which is my main partition. I mounted /dev/sda7, and installed the kernel-modules-2.6.35.11 pkg. Rebooted, and got the same error?
I booted again with the dvd, mounted the partition, and navigated to /lib/modules - no 2.6.35.11 in there!
How do I get that package to install?
View 6 Replies
View Related
Jul 16, 2011
Upgraded from 13.1. Certain panel plugins seem to be gone in XFCE4.
When I try to add the Icon Box, Task List or several others to the panel, I get "Could not open 'iconbox' module".
There is an iconbox module in /usr/lib/xfce4/panel-plugins, along with some others, but they all date back to 3/29. In /usr/share/xfce4/panel-plugins, there is a mix of newer and older files.
Did the icon box go away? Do I need to nuke ~/.config/xfce4?
View 14 Replies
View Related
Sep 9, 2010
My cli php is missing modules as regular user but not as root. In particular, mysql is missing... which is how I came across this issue. I'm running Slack 12.2 w/ php 5.2.14, standard Slack packages. As a normal unprivileged user:
-> whoami ; php -v ; php -m |wc -l ; php -m |grep mysql
jerry
PHP 5.2.14 (cli) (built: Aug 25 2010 15:17:31)
Copyright (c) 1997-2010 The PHP Group
[code]....
I've tried reinstalling php and it made no difference. php.ini is not to blame. I've Google'd this to death, no luck.
View 7 Replies
View Related
Jun 7, 2010
The case is that I've got 2 harddisks. On the one windows xp(slave) - and on the other one ubuntu (master). During the boot I get these errors...
"Gave up waiting for boot device"
"Boot args(cat /proc/cmdline)"
"Missing modules (cat /proc/modules; 1s , dev)"
"/dev/disk/by-uuid/f96603ce - does not exist"
These problems occured because of this:
After using ubuntu I tried to reset my bios, because else it couldn't have found the disk with xp. And I didn't disconnect the disk with xp while resetting the bios. And now the system can't find the disk with xp any more when booting. Is there a way to finding the disk..? And I'm in doubt about IF I've resetted the bios at all. I miss a manual for PCCHIPS M851. May be it can take 20 minutes for the bios to be resetted? The shop where I bought the motherboard doesn't exist any more... and don't know the manufacturer. Could I damage the motherboard if I tried rebooting lots of times to get it work?
View 5 Replies
View Related
Jan 5, 2011
new user and have had a crash boot up and get the following: missing modules (cat/proc/madules;is/dev) Alert! /dev/disk/by-uuid/13bf007d-3bab-48et-b91a-babe68ab3223 does not exist
View 9 Replies
View Related
Jul 17, 2010
we have done a minimall install of centOS. We don't use software RAID, and after doing a "lsmod" we see a lot of modules loaded we dont need.
So I tried to remove the DMRAID because we don't need it. I'have added the dm_mirror, and dm_raid45 to both /etc/modprobe.d/blacklist:
blacklist dm_raid45
blacklist dm_message
blacklist dm_log
blacklist dm_log
blacklist dm_mod
[Code]...
View 2 Replies
View Related
Jun 20, 2010
I have a dedicated server. It doesn't have any GUI (gnome or something like that), so i need to use terminal, which is hard for a non-advanced user. So i have a few questions:I'm hosting a CS server and a few other servers later on. But right now only CS server. With it i need to start another perl window, which updates the stats to the website and database.So how can i start both server, that program and maybe use the console at the same time?Another question is: when i quit the server, it automatically restarts. How can i just kill the process? I don't want to restart my server every time i want to shut down the CS one.
About perl: how can i install per modules and how can i know the translations of perl modules from windows to linux names?And is there any firewalls by default clean installation, which might 27500 port and any connections trough 3306 to the database on my web server? If no, how come, that my program is unable to connect to my website database?Will my own email server take a lot of resources? Which only i would use and wouldn't receive much mail? And are there any guides how can i do that?Will a web server, which wouldn't take much visitors each day take a lot of resources?
View 13 Replies
View Related
Apr 14, 2009
i am trying to install a driver for my belkin wireless usb adapter but when i type make it says cannot find lib/modules/<debian version>/build so it does not configure the sources.
View 1 Replies
View Related
Aug 30, 2010
i try update new kernel and got this error when i try to actived tun/tap
Quote:
-bash-3.2# modprobe tun
FATAL: Could not load /lib/modules/2.6.18-164.15.1.el5.028stab068.9PAE/modules.dep: No such
[code]....
View 2 Replies
View Related
Mar 6, 2011
I want set up VPN on my VPS but when i try to turn on tun/tap i see:
:/lib/modules# modprobe tun
FATAL: Could not load /lib/modules/2.6.18-194.17.1.el5.028stab070.7PAE/modules.dep: No such file or directory
os : debian 5
(folder lib/modules is empty)
View 1 Replies
View Related
May 28, 2009
I keep getting things like code...
but i already do
yum groupinstall "Development Tools"
yum install kernel-devel
commands.
I just reinstall my centos, and in the previous installation I used the virtual box without problems. that is giving wrong this time?
(i had tried the .run installer and the rpm installer but all lead the same.)
View 5 Replies
View Related
Dec 27, 2009
Many Apache2 unused modules loaded. I'm going to disable some of them.But what is the command to disable the modules?
View 1 Replies
View Related
Jan 23, 2010
The problem I am having is that iptables won't load the required modules for my firewall rules.
iptables -F
iptables -P INPUT DROP
iptables -P FORWARD DROP
[code]....
View 1 Replies
View Related
Mar 2, 2011
CentOS and RHEL even though I've been using various Debian/Ubuntu Distros for quite some time. However, I always used to install perl modules via apt-get or, if that did not work, via cpan.In CentOS, I tried installing a couple of perl modules via yum but there are only a very few available. When trying to install perl modules via cpan, the install process usually fails during the make process.I'd prefer to install those modules via the distribution's package manger yum as it's easier to resolve dependencies. Are there any repositories I should add to have more perl packages available? (Where to add further repositories, I just know /etc/apt/sources.list in debian based distros)The other option still would be to install perl modules via cpan. For instance, when trying to cpan install Geo::IP, the output is as follows:
CPAN: Storable loaded ok
Going to read /root/.cpan/Metadata
Database was generated on Wed, 02 Mar 2011 02:42:03 GMT
[code]....
View 2 Replies
View Related
Apr 10, 2011
I have newly updated CentOS 5.6 server and would like to keep it "true" to CentOS, so try to avoid manually installing rpm's and CPAN modules.
I need to install perl graphing modules, Chart::Base, GD, GD::Graph, GD::Text, etc.
Have already done
Yum install gd gd-devel php-gd
View 3 Replies
View Related
Feb 28, 2010
I had my Canon DV camcorder working well with Kino for capture in Fedora 11. I upgraded to F12 recently and tried to capture some video tonight. It does not seem to even recognize my camera.My card: 02:08.0 FireWire (IEEE 1394): Agere Systems FW322/323 (rev 04)My kernel: 2.6.31.12-174.2.22.fc12.i686.PAEI read somewhere about installing ieee1394 kernel modules from ATRPMs and rebuilding the kernel but
View 1 Replies
View Related
Mar 7, 2009
I just installed a fresh CentOS 5.2 32bit system. I used "The Perfect Server" server document from Howtoforge and went through those steps and then added Webmin administration console. I then tried to install VMware Workstation 6.5 onto the system. I downloaded the latest VMware bundle, ran it and everything went fine. I then try to run vmware and I get the following messages
C header files matching your running kernel were not found
Before youcan run VMware Workstation, several modules must be compiled and loaded into the running kernel
Kernel Headers 2.6.18-92.1.22.el5.centos.plusPAE
Kernel headers for version 2.6.18-92.1.22.el5.centos.plusPAE were not found. If you installed them in non-default path you can..
View 6 Replies
View Related
Apr 26, 2010
this might not be a Centos related issue, but since I'm using Centos I guess it doesn't hurt to ask; I've used Ubuntu before and haven't encountered this. So, I've just installed Centos and Webmin and now I'm trying to configure the server. Problem is that on the Apache configuration page I don't have the option (should be there) to configure the Apache modules. I've attached a file to show where the modules option should (as before) appeared.
View 6 Replies
View Related
Apr 25, 2011
I am trying to install Centos5.6 on an older machine which has a 3com NIC. how I can get the kernel modules for this nic, or do I have to compile a new kernel with this enabled?
View 19 Replies
View Related
Jun 4, 2011
I am administrating a server with CentOS installed. It came with qmail and courier-imap preinstalled, and Plesk.I need to manually add email accounts outside of Plesk, because my 1-domain Plesk license only allows the creation of one email address (yes, it sucks).
When I say add email account I mean creating a new email address, have email for that address be stored in its maildir, and have a corresponding imap (and hipefully also pop3) account that will be able to read that mail. All this with virtual domains.I've already found out how to create the new email addresses for qmail, so that email for the new email address is being delivered correctly. Now I need to create the imap/pop3 accounts for courier.
For the qmail part, I create a folder in in /var/qmail/mailnames/virtualdomain.org/username and a maildir called Maildir inside it. This is how the first mail address was created by Plesk and i'd like to maintain the same structure. As I've said, the qmail part is already working, I need to get the courier-imap part to work. Ideally, it should accept login with both short (i.e. myuser) and long (i.e. myuser@virtualdomain.org) user names.
Currently the only authentication module that is enabled in courier-imap is authpsa, which is Plesk's authentication module.in order to add more authentication modules, do I just need to add them to the authentication module list in /etc/courierimap/imapd, or do I need to reinstall courier-imap with support for such authentication modules? I thought I would only need to add them to the list, but I've noticed that the /usr/lib/courier-imap/authlib/ folder only contains a binary called "authpsa". Does that mean that other authentication modules are not even installed? If so, can I install them without reinstalling courier?
The second question is, what would be the most recommended authentication module that would make it easiest to create new email addresses/accounts from the command line? I need to be able to write a shell scripts capable of creating a new email address with all that is needed, and I'd like to keep this script as simple as possible, so for example I'd avoid mysql-based authentication as it sounds rather complicated. And the last question is, if I do need to reinstall courier-imap, how can I install a package without recompiling it? Will my one existing mailbox keep working?
View 1 Replies
View Related
May 11, 2010
I've been trying to load my pcmcia network card driver "xirc2ps_cs" at startup with no success. I have added "modprobe xirc2ps_cs" to the rc.modules file but it doesn't load at startup. Curiously, though, if I execute rc.modules AFTER the machine has booted it will load the modules just fine. Just not during the boot up process. Thinking that hotstart might have been causing problems I've disabled hotstart (chmod -x) temporarilly to remove it from the picture, but there was no change.
View 5 Replies
View Related
Oct 6, 2010
I have a Pinnacle IEEE 1394 card which according to Yast/Hardware Information seems to be installed and recognised correctly.
Trying to use Kino to download from a Camcorder via IEEE 1394 nothing happens and looking at Kino Preferences IEEE 1394 tab it tells me:
"The IEEE Subsystem is not responding. The raw 1394 module must be loaded, and you must have read and write access to /dev/raw1394."
I do not have an entry /dev/raw1394 on my system. Files libraw1394 and libraw1394-8 were installed by default(SUSE 11.3 64bit), and I have since installed any others offered which were libraw1394-8-32bit, libraw1394-devel, libraw1394-devel-32bit but to no avail.
View 7 Replies
View Related
