Ubuntu :: 10.10 Kernel Not Recognizing Firewire 1394 Chipset?
Feb 7, 2011
I want to enable Firewire for my audio interface. I'm using ubuntu 10.10 (64 bit version).
lspci returns that I have a Texas instruments chipset. But when I search the kernal log file with grep, there are no references to this. I've searched for 1394, found nothing. I've read the whole thing and found references to Firewire_core, but looking online, this appears to be something else? I may be wrong, but my device is not recognised anywhere, as far as I can tell.
I have checked in Synaptic that I have the 1394 libraries installed, I do. And checked their dependencies are present.
I know that the device and the mobo are fine, as windows identifies the device with no trouble.
Can anyone tell me, what universe and multiverse means in relation to Synaptic packages, and how to enable these settings?
Also, should I expect my Firewire device to appear in the Places menu when it is recognised? It hasn't as yet, and I don't seem to be able to select for use as an audio interface in Ardour, the linux studio-recording program.
Maybe I've missed it completely, but I think the key problem is thers no reference to 1394 in my Kernel log.
lspci returns
03:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
and the firewire_core stuff in the kernel.log
Feb 7 17:16:36 johnny-ubuntu kernel: [ 1.355772] firewire_ohci 0000:03:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[Code]....
View 1 Replies
ADVERTISEMENT
Nov 5, 2009
I am relatively new to CentOS. I attempted to install 5.3 with firewire several weeks ago and abandoned the install because it was taking too long to figure out the problems. I've had to revisit this and am having troubles with it. I was told that CentOS 5 has firewire 1394 support. When I did the typical install, it didn't physically (manually) install the video1394 and raw1394 modules. At boot up, my computer says that video1394 and raw1394 are "Module(s) not found". If I do <lsmod> I get (*snippet of o/p),
Module Size Used by
lockd 63081 0
sunrpc 145405 2 lockd
dm_mirror 24393 0
dm_multipath 24909 0
scsi_dh 11713 1 dm_multipath
[Code]...
I have found several other posts on the web that indicate I have to get the latest source files, but I do not know which one is the correct one or where to find it. Can anyone ponit me in the right direction? Is there anything else that I need to do?
View 3 Replies
View Related
May 25, 2010
I have a Maxtor external storage HDD with firewire (1394) interface.
When I connected it with my computer, which is running an up-to-date Debian squeeze, it was recognized as "/dev/sda1" and replaced the existing partition on the computer.
View 2 Replies
View Related
Mar 28, 2010
I've a PowerMac G4 MDD that has OS X Leopard on it. I have repartitioned it to accommodate an Ubuntu install. However, I have no Disk Drive in the G4, it was broken so I removed it. Now I have an iBook G4 I have tried using an ubuntu cd on to install to the said PMac in TDM, but of course after reading the Ubuntu kernel doesn't support install to firewire by default. Can someone help me by compiling a Cd image I can use to accomplish this or tell me how without the use of another linux box?
View 2 Replies
View Related
Dec 8, 2010
I have a server for virtualization (Xen) and when I do a free -m it does not show all the memory (which should be 64GB), it shows 32GB (a considerable difference, isnt it?).
My hardware is a Dell R410 server:
Dual Xeon 5530
64GB DDR3
4x SAS 500GB in RAID 10
I tried to compile Xen 4.0.1 but I can't solve a compile error that it gives me (if you want to take a look: [URL]) that is the end of the compilation including the error. But, I installed Xen from yum directly after reformating the HD and it works fine now.
My kernel version: 2.6.18-194.26.1.el5xen x86_64
CentOS 5.5 64 bit
[root@server1 xen-4.0.1]# cat /proc/meminfo
MemTotal: 33554432 kB
[code]....
View 7 Replies
View Related
Aug 25, 2010
I'm running Squeeze and I've been running into the r8169 hang problem (see [url]for example). A temporary (until the driver foibles in the kernel are resolved) solution that seems to be working for many people is passing the boot option "pcie_aspm=off" to the kernel.
Apparently, either I don't understand grub2 at all or my kernel doesn't like me very much. I put the option in grub.cfg like so:
However, it appears that the kernel, for whatever reason, is either not being given this boot option or it's not interpreting it correctly. When I run lspci -vv I get this for my r8169 ethernet card:
The relevant section is LnkCtl: ASPM L0s L1 Enabled; indicating that ASPM is still on.
View 8 Replies
View Related
Jul 13, 2009
My graphics card (00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03))
used to work fine, but yesterday I opened glest and it crashed my computer within 5 seconds. No picture was ever displayed. I downloaded another 3D game called Nogravity (Glest being my only one, I wanted something else to test) and it crashed after a few minutes of play and I had to restart. After all the crashes kerneloops came up with a report.
Here is the most recent one:
Code:
I did recently notice that I have no direct 3D rendering, it comes up with something like: No (LIBGL_ALWAYS_INDIRECT SET)
I do not know whether I used to have it, but I do know that 3D apps used to run perfectly well. (In fact the stability of 3D apps was what converted me from Ubuntu where they crashed every 5 minutes)
I ran glxgears for 5 seconds and it gave me 420 FPS.
View 3 Replies
View Related
Dec 13, 2010
which vanilla kernel version provide support for QM57 chipset?
View 1 Replies
View Related
Feb 7, 2009
I have an intel 5300 wireless chipset which is not supported in kernel 2.6.25. I am currently using opensuse 11.0, I downgraded from 11.1 since I faced so many other problems. can I setup my wireless driver under kernel 2.6.25? if so, how could i do this?
View 7 Replies
View Related
Feb 28, 2010
I had my Canon DV camcorder working well with Kino for capture in Fedora 11. I upgraded to F12 recently and tried to capture some video tonight. It does not seem to even recognize my camera.My card: 02:08.0 FireWire (IEEE 1394): Agere Systems FW322/323 (rev 04)My kernel: 2.6.31.12-174.2.22.fc12.i686.PAEI read somewhere about installing ieee1394 kernel modules from ATRPMs and rebuilding the kernel but
View 1 Replies
View Related
Oct 6, 2010
I have a Pinnacle IEEE 1394 card which according to Yast/Hardware Information seems to be installed and recognised correctly.
Trying to use Kino to download from a Camcorder via IEEE 1394 nothing happens and looking at Kino Preferences IEEE 1394 tab it tells me:
"The IEEE Subsystem is not responding. The raw 1394 module must be loaded, and you must have read and write access to /dev/raw1394."
I do not have an entry /dev/raw1394 on my system. Files libraw1394 and libraw1394-8 were installed by default(SUSE 11.3 64bit), and I have since installed any others offered which were libraw1394-8-32bit, libraw1394-devel, libraw1394-devel-32bit but to no avail.
View 7 Replies
View Related
Dec 9, 2009
I recently added an external hard drive through a IEEE 1394 interface. I'm finding that during large file transfers the system slows to a crawl. It's still running: routing for example seems fine. But running applications are pretty much unusable: Apache is unusably slow, SSH login is very slow, etc. Currently I'm using the IEEE 1394 drivers from Axel's ATRpms but I'm pretty sure I saw this with the default kernel IEEE 1394 drivers too.
View 4 Replies
View Related
Apr 6, 2011
where do I find the driver for 1394 net adapter in a compac athelon 3300 desktop (2005 vintage). I am helping a friend and she does not have the disc.
View 3 Replies
View Related
Aug 10, 2009
I would like to install Fedora 11 on an ASUS P5L-VM 1394 motherboard with a 3 GHz Pentium 4 CPU. This is an LGA775 socket mobo with a Intel 945G chipset. Two SATA hard drives are plugged into SATA ports. An IDE DVD drive is plugged into the IDE/ATA port. Using the 32 bit Fedora 11 installation disk, I have seen two cases:
1) No hard drive recognized. When i get to the disk configuration screen, there are no options to choose from.
2) By monkeying around with the BIOS settings or switching the SATA ports the disks are connected to, I can get an alternative mode in which no drivers are found for the DVD drive either.
Currently, a version of Ubuntu is installed. UPDATE: The board was purchased in a P3-PH4C barebones, which for unknown reasons requires a different BIOS issue than the regular P5L-VM 1394. Updating to the most recent BIOS does not resolve the problem. One the installation procedure fails to recognize the hard drives, going into a shell and examining the boot up log shows that the kernel recognized both hard drives. So it's down to why the installation procedure is not recognizing them.
View 1 Replies
View Related
Dec 12, 2010
When I boot it takes about 5 seconds for the firewire device (fw0) to load. I don't use firewire and I would like to disable it to help improve my boot time. My BIOS doesn't have an option to turn it off. Is there a way I can turn it off in Ubuntu?
View 2 Replies
View Related
Jul 26, 2010
I have successfully installed ubuntu on a seagate goflex hd and can get it to boot with using a usb cable and refit on my mac. But I cannot get it to boot with a firewire cable and I have not seen any instructions on how to do this with an intel imac, only a ppc.
The mac does recognize the external hard drive when I hold the option key when I turn on the mac, but I get a "no bootable device found" error once I select it...same thing happens with refit and firewire cable. Any ideas on how to get this to work? I am ok with running it via usb cable, but would like the firewire option.
View 2 Replies
View Related
Oct 1, 2010
I'm thinking of getting a forensic bridge to help with fixing machines and I was wondering if the support was good for Firewire and if so do they show up in /dev like hda and sda do so I can keep using my normal set of tools.
View 2 Replies
View Related
Nov 10, 2010
I have updated my computer to Kubuntu 10.10 (which has the new firewire stack enabled by default) and now my firewire application is giving permission related problems. I try to read CSR_CHANNELS_AVAILABLE_HI (defined in libraw1394 which is used by the application) to see which isochronous channels are available to use:
[Code]......
With the old stack (raw1394) there are not problems and it runs fine and I get the octlet back containing the information about the free channels. But with the new stack (firewire_core and friends) I get a 'permission denied' (errno = 1) error. I do have permission to read/write /dev/fw* and I even tried running the application as root without any luck. If I read the config rom of a node (located at CSR_CONFIG_ROM) there are no permission problems and I am able to get the information/ What am I doing wrong? Did something change with the new stack (even though libraw1394 should be compatible with both stacks)? Is it a bug?
View 3 Replies
View Related
Apr 8, 2011
I want to capture DV-video through IEE1394 (FireWire) with Kino and Ubuntu 10.10. Seems I can't capture... When I plug in the camera there is no hot plug message (if there should be one? I've read it should...). The DV-out on the camera is enabled There is no option to enable/disable the port in my BIOS.
Some information:
Code:
a~# lspci | grep 1394
07:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
Hope there are some command to check?
View 1 Replies
View Related
Aug 1, 2011
I bought a USB to firewire cable to use with a DV camera, but I don't know what to do now. Do I need to enable firewire drivers, or is there something else I should do? I know I should read the manual.
View 9 Replies
View Related
Jun 11, 2011
I just installed a new clean copy of Ubuntu 11.04 onto a Dell XPS M1710 laptop. I believe it has a generic Texas Instruments Firewire controller. Plugging in a standard Firewire disk does nothing. If I boot with the device and run �dmesg|grep firewire�, I get:
Code:
[ 1.327138] firewire_ohci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.388103] firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
[ 1.888144] firewire_core: created device fw0: GUID 354fc0001a369961, S400
[code]...
How can I install the necessary modules to make this work?
View 1 Replies
View Related
Apr 21, 2010
I have several laptops that all have firewire ports. Here is what I want to do. connect two laptops together using firewire across the table don't care about any existing network connection either laptop might have in progress use firewire for an interconnecting ad-hoc, static network link establish file and folder sharing between the two laptops (NFS makes a lot of sense but there are other options) Here is a likely scenario.
Two folks meet at some hotspot with a lot of data to share and exchange. Each is likely already on the net through the hotspot. Connecting firewire point-to-point gets an ad-hoc net and subnet that is independent of whatever might be happening with the hotspot. When this ad-hoc net comes up, udev or deviceKit (or whatever) rules enable the automatic sharing.
View 2 Replies
View Related
Apr 14, 2011
I'm currently pursuing a CCNA certification. I need to use a so called "Eagle Server" to do my lab exercises. I have the Linux Live CD (FEDORA CORE 3 KERNEL 2.6.12) and I have installed it on a laptop that I have (TOSHIBA EQUIUM M50-164, PSM57E). This laptop had Windows XP installed, so I created a 4GB FAT partition and booted with the Live CD.I need the CD in the tray every time I want to run Linux. Without the CD, it boots to Windows XP. Also, according to Eagle Server documentation, any modification to the server is available even after reboot. Well, that is not happening to me. Does someone have a clue why the server doesn't save the modifications? Is it because I need the Live CD to boot, even after I have installed on a FAT partition?
Eagle server supports only 1 network interface card, eth0. When I first run the server it showed me that the hardware mapped to eth0 was my wireless adapter. There is no option to disable it in my BIOS, so I just removed the hardware myself. After rebooting it show eth1394 on eth0. I presume that is the FireWire Adapter.What can I do so that eth0 is mapped to my LAN adapter (Marvell Yukon 88E8036 PCI-E Fast Ethernet)?Is there a way do disable FireWire?Please remember that due to 1st problem above, any changes to the server are not available after reboot So the main problem is that I can't ping from Eagle Server to the router and vice-versa
View 3 Replies
View Related
Feb 27, 2010
I just purchased a firewire cable but I have no clue how to use it. I'm trying to connect my desktop and laptop via the firewire.
View 3 Replies
View Related
Aug 21, 2010
I'm not sure if I have a hardware or OS problem. Firewire on my old G3 iMac has stopped working. Previously I've used a scanner and an external hard drive (Iomega eGo) without problems while running Lucid. Now neither works with the iMac, though they both work when connected to a PC. Both the PC and the iMac are running the latest versions of Lucid.
I can't tell when the problem began since I don't use the scanner or hard drive that often. I did try booting using the live 10.04 CD for PowerPC and had no joy with either device.The LCD on the hard drive lights when connected to the firewire port so power is coming through. The scanner has its own power supply.Checking with lsmod I see that both the modules ieee1394 and ohci1394 are loaded.I suspect it's a problem with the hardware. Does any one have an idea how I can go about verifying that? I'd hate to bin an old faithful without first checking everything out.
View 4 Replies
View Related
Oct 19, 2010
I have a Panasonic DVCPRO HD camera with a Firewire output. I'd like to take the video footage off of the camera and put it into my Ubuntu (Studio, 10.04) machine. Unfortunately, neither my Ubuntu machine nor the camera seem to recognize a connection with each other.
I've only used this camera like this with Mac OSX, in which I press a button a couple folders pop up with everything in them which I can then digitize in Final Cut Pro. I'd prefer being able to use my Ubuntu setup with Open Source Software to view and edit this footage.
how to get ubuntu and this camera to talk to each other and play nice?
View 3 Replies
View Related
Oct 24, 2010
I just finished installing Lucid Lynx on an iMac7,1. So far, everything looks good, except for the fact that I am unable to access my external firewire drive. I know that outside of the Mac world, firewire isn't seen very often, but I was under the impression that it was supported. It doesn't show up in the /mnt directory of my new system, or my desktop. Then again, I am new to Ubuntu, and the filesystem looks a bit different from Mac and Debian, the two other *nix filesystems that I am the most familiar with. It shows up fine in Snow Leopard.
View 5 Replies
View Related
Jan 18, 2011
I search at FFado.org for this soundcard and it says that it's fully supported, but I can't get it to work.
View 8 Replies
View Related
Jan 22, 2011
I'm trying to view the output of a dv firewire capture device (advc-100) fullscreen through vlc. I've read of people being able to do this but a detailed explanation of how eludes me.
I'm running Ubuntu 10.10 and VLC 1.1.4
The error message I'm given after trying to open through 'media>open capture device>play' is;
Quote:
Your input can't be opened: VLC is unable to open the MRL 'v4l2:///dev/ffc1/'. Check the log for details.
(and I can't find the log)
I'm not even sure if I've got the device name right so I ran lspci from the command line which gave the following output (and I still can't work out what it is);
Quote:
[ 0.008410] ... event mask: 000000000003ffff
[ 0.014418] ACPI: Core revision 20100428
[ 0.020016] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.020023] ftrace: allocating 21756 entries in 43 pages
[Code].....
View 1 Replies
View Related
May 7, 2011
Is there a terminal command or application to browse attached firewire devices in the likes of lspci and lsusb? I'd like to view elementary device information such as the ID, manufacturer, and the like.
View 1 Replies
View Related
