i try update new kernel and got this error when i try to actived tun/tap
Quote:
-bash-3.2# modprobe tun
FATAL: Could not load /lib/modules/2.6.18-164.15.1.el5.028stab068.9PAE/modules.dep: No such
[code]....
I want set up VPN on my VPS but when i try to turn on tun/tap i see:
:/lib/modules# modprobe tun
FATAL: Could not load /lib/modules/2.6.18-194.17.1.el5.028stab070.7PAE/modules.dep: No such file or directory
os : debian 5
(folder lib/modules is empty)
Tonight I installed ubuntu 10.10 (32 bit) on an external usb harddrive with a dvd I burned and I used my older desktop. I disconnected all internal and external drives first so everything had to be put on the usb drive I selected (only option available). I used the option to load extra software, use the entire hard drive, and let the software do it's thing. I basically had no options where to put things and it didn't have much choice.
When I boot the usb drive on my laptop (win 7 64 bit) by telling the bios to boot to it first... I get an error: modprobe: FATAL Could not load /lib/modules 2.6.35-22 generic modules No such file or directory. This message appears twice and then it does boot into ubuntu and seems to work fine. I'm new to this OS so that is an uneducated guess but the things I have done seem to be working. So exactly what is this error referring too? Is there a way to fix the problem or do I just ignore it.
I recently started having this odd behaviour while using and loading cpufrequtils on boot, I don't know if it is happening to someone else.During boot I'm getting( when /etc/init.d/cpufrequtils invokes /etc/init.d/loadcpufreq to load the proper module):
Loading cpufreq kernel modules...FATAL: Error inserting speedstep_centrino (/lib/modules/3.0.0-1-amd64/kernel/drivers/cpufreq/speedstep-centrino.ko): No such device
FATAL: Error inserting pcc_cpufreq (/lib/modules/3.0.0-1-amd64/kernel/drivers/cpufreq/pcc-cpufreq.ko): No such device
[code]....
I'm trying to install the nvidia drivers but it is not working.
lspci | grep VGA
02:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX - nForce GPU] (rev a3)
My xorg.conf looks like this:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
[code]...
And after that my X is not working. And when i try sudo modprobe nvidia I get this:
FATAL: Error inserting nvidia (/lib/modules/2.6.26-2-686/nvidia/nvidia.ko): No such device
How do I get modules in the Kernel to load automatically at boottime? I''m specifically trying to get i810fb to load during the boot process. In Ubuntu, I just had to edit a file and update my initramfs. How do I do this in Fedora?
View 5 Replies View RelatedYet another problem I have. Suse is taking a while to learn but I swear I'm getting there. Can pritty much do everything by CLI now. I'm trying to run VMware Workstation 6.5 on OpenSuse 11.2, Gnome. I had it running fine but then needed to do a system re-install and upon installation this time I get a error saying it's is Unable To Build Kernel Module and reffers me to a error log. The error log says:
Code:
Mar 14 22:07:51.420: app| Log for VMware Workstation pid=6136 version=6.5.0 build=build-118166 option=Release
[code]....
My problem is that my debian in hard drive 1 wont load, gives me a fatal error.
This is my computer:
Hard drive 1 (1TB): broken debian 333gb, windows7 666GB (approximately)
Hard drive 2 (250GB): debian (working fine, im using it now).
Details: I tried to install some webcam software thing and I think somehow i deleted some system files... ...So now when I start my computer, grub loads and i choose Debian on hard drive 1,i click it but when it goes through the list of things, it says
FATAL ERROR /lib/modules/2.6.32-5-amd64/kernel/fs/fuse/fuse.ko: No such file or directory
And it just goes to a blank screen with a blinking cursor.
Now that's not all. I did something else wrong... I ran Gparted from a usb stick to create an extra partition on hard drive 1 because i was trying to install another linux on it or something so I can access my computer.
But, when I tried to shrink it and create an extra partition on the disk of about 150gb, it was taking so long and i read that it may take about 40 hours, so i turned it off after a few hours. So, I may have created more problems than my original problem.... I can still boot into Windows 7 though.
So now i have:
Hard drive 1 (1TB): broken debian about 120gb, windows7 666gb (approximately), free partition
Hard drive 2 (250GB): debian (working fine, im using it now).
Also, of interest: When I look at the folders of the messed up debian, there is nothing in the /lib/modules/2.6.32-5-amd64/kernel folder. Empty.
So basically. my problem is that I get the fatal error, and then maybe i create some extra problem by stopping the partitioning when it wasnt done. so please help me try to fix the fatal error first
trying to install the wi-fi drivers for RaLink rt3090. How can I reset the kernel modules to default so I can try again?
View 3 Replies View RelatedAfter a hiatus I found my machine to be down, but upon turning it on I get significant errors and dropped into emergency mode (see below). This machine wasn't very up-to-date to begin with, so I'm having difficulty determining the order in which to proceed. A couple naive checks and updates on my part are not working. The file system appears to be intact enough to "cd" around and "ls" to see that my files are all (seemingly) there. But the kernel modules aren't loading which is, you know, a problem.
The state I find it in is that it will begin booting to Linux 3.2 (which I know is no longer supported in testing, see below where I tried to update to 3.16), but fails quickly and puts me into emergency mode
Loading, please wait...
megasas: INIT adapter done
systemd[1]: Failed to insert module 'autofs4'
systemd[1]: Failed to open /dev/autofs: No such file or directory
systemd[1]: Failed to initialize automounter: No such file or directory
systemd[1]: Failed to set up automount Arbitrary Executable File Formats File System Automount Point.
...Then several drives show up as clean....
Running "journalctl -xb" shows that it can't mount the module even though it's there on the disk:
... systemd-modules-load[259]: could not open moddep file '/lib/modules/3.2.0-4-amd64/modules.dep.bin'
... systemd-modules-load[259]: Failed to lookup alias 'firewire-sbp2': Function not implemented
... systemd-modules-load[259]: could not open modeep file '/lib/modules/3.2.0-4-amd64/modules.dep.bin'
... systemd-modules-load[259]: Failed to lookup alias 'loop': Function not implemented
And yet, if I 'ls' that modules.dep.bin file, it's right where it's supposed to be, for the appropriate architecture and everything.
After that (in the journalctl output), it shows several things start up, but systemd-modules-load.service fails:
.. systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
.. systemd[1]: systemd-modules-load.service: Failed to start Load Kernel Modules
...and lots of things fail from systemd-udevd: failed to execute '/lib/udev/socket:@/org/freedesktop/hal/udev_ev_event': No such file directory.
"uname -a" shows
Linux <my hostname> 3.2.0-4-amd64 #1 SMP Debian 3.2.32-1 x86_64 GNU/Linux
I tried updating via apt to the Linux 3.16.0 kernel, but grub wasn't finding it in a way that effects the boot process, and no appropriate "vmlinuz-" file appears with the others on the boot partition. So, I tried switching to grub2 but the update-grub command produces many errors.... For now, grub2 still (attempts to) load the old kernel (3.2) with the same results as I was getting with the old grub-legacy.
Regarding the module-loading features, running "lsmod" shows about 30 lines:
Module
ext3
mbcache
jbd
dm_mod
usbhid
hid
[Code] ....
...I'm at the limit of what I know to check and/or try.
I updated alsa to the latest 1.0.22, however now the alsa modules refuse to load! When I do
Code:
rcalsasound restart
I get:
Starting sound driver: hda-intelWARNING: Error inserting snd_timer (/lib/modules/2.6.31.5-0.1-desktop/updates/alsa/acore/snd-timer.ko): Invalid module format
WARNING: Error inserting snd_pcm (/lib/modules/2.6.31.5-0.1-desktop/updates/alsa/acore/snd-pcm.ko): Invalid module format
[code]....
My audio codec is IDT 92HD81B1C5 and the problem is I can't get the mic to work properly with the stock alsa.
I've been playing with some intel server board and they provide a type of fakeraid which is called Embedded Server Raid Technology 2. Since Intel officially support RHEL and SLES on their servers, they provide drivers/modules for this fake raid (which supports raid 0, 1, 5 and 10). I have installed RHEL before on these severs and redhat's installer has the ability to load additional modules (via a boot command linux dd).
While intel doesn't provide the modules for other operating systems, they provide a library where people can build their own module for their kernel. I managed to build this module called 'megasr' (for now I've built it for kernel 2.6.32-24-generic which is my testbed at the moment but I would eventually build it for box i386 and amd64 for both server and desktop versions) and load it on a system which is installed on a single drive.
We are able to load it successfully and see the raid 5 as a single volume and access it (partition, format and copy data to it) and all its functions (work in degraded mode, rebuild, etc) work fine but my main goal is to actually install such volume as my main boot volume (similar to how its possible with RHEL or SLES). Is this possible? Load additional modules during the installation that will be present after the installation is finished?
My apache and wordpress were running fine till this morning. I ran updates via webmin,though I wasn't sure what those updates were for.
Then when I tried to access mysite.com, index.php downloads instead of opening.
I tried some troubleshooting and followed a form where it was advised to enable mod php5, so I did a2enmod php5 and tried to restart apache. Since I get this error Cannot load /usr/lib/apache2/modules/libphp5.so into server.
Code...
The problem is to get sound out of my PC. I've executed alsaconf few times and every time it generates following errors to /var/log/messages code...
Tried to get my VDR working again, but the dvb modules refuse to load code...
View 7 Replies View RelatedI have this kind of error:
Code: Select allr@prime:~$ systemctl status systemd-modules-load.service
● systemd-modules-load.service - Load Kernel Modules
Loaded: loaded (/lib/systemd/system/systemd-modules-load.service; static)
Active: failed (Result: exit-code) since Чтв 2015-08-20 08:07:38 EEST; 13min ago
Docs: man:systemd-modules-load.service(8)
man:modules-load.d(5)
Process: 150 ExecStart=/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)
[Code] .....
I was using v 8.10. It came to its end of life and I felt compelled to upgrade. I upgraded to v 9.04. All seemed well, but then I discovered that I had no sound. As a test, I booted up with the v 9.04 CD, using it as a live CD. I had sound, so it seems as though it should be possible for me to have sound from my upgraded v 9.04 too, provided I can make the necessary changes to it.
When using the live CD and opening the volume control, I get as the listed device "HDA ATI SB (Alsa mixer)". That doesn't appear when I open the volume control using my upgraded v 9.04. Instead, it says "Playback: Null Output (PulseAudio mixer)". Also, when I check for loaded modules when using the live CD, I get many with snd in their name, but nary a one when using the upgraded 9.04.
Is there some simple way for me to load the same modules in the upgraded 9.04 as are loaded by the live CD? I tried to figure out the answer to this by reading other threads, but was simply overwhelmed by the volume of material and often wasn't sure to which version of Ubuntu it applied.
I was wondering how can I determine among the modules loaded at boot which of them are really necessary and which are not, in order to reduce the boot process time and have a more "elegant" system start.
I know this theme is a little bit of complicated because it depends of the user's point of view and demand a high knowledge of which things are happening in your system but I need somewhere to start improving the performance of my debian system.
When I plug in my camera via usb I see this error
Code:
load-modules.sh: 'usb:v22B8p2B44d0001dcFFdscFFdp00icFFiscFFipFF' is not a valid module or alias name
This is happening on multiple machines. My udev version is 153. I don't think this is a permissioning issue because I've tried playing around with the udev rules/
How do I configure my machine to load specific modules at startup.
View 1 Replies View RelatedI use RedHat Linux 5. I install the latest Apache Httpd, 2.2.3. As I start the Httpd I got followings:
Code:
Starting httpd: httpd: Syntax error on line 210 of /etc/httpd/conf/httpd.conf: Syntax error on line 1 of /etc/httpd/conf.d/www.pb-versicherung.de-test.conf: Cannot load /etc/httpd
[code]...
While attempting to install CentOS 5.4 x86_64 from DVD (downloaded torrent), I encountered a fatal error that aborted the install and dumped a bunch of log files. I attempted this a couple of times resulting in the same error. I tested my hardware via CentOS 5.4 x86_64 live cd without exception. Here is my install configuration:
1)Booted to DVD
2)Skipped media test
3)English (English)
4)U.S. English
[Code]....
we have done a minimall install of centOS. We don't use software RAID, and after doing a "lsmod" we see a lot of modules loaded we dont need.
So I tried to remove the DMRAID because we don't need it. I'have added the dm_mirror, and dm_raid45 to both /etc/modprobe.d/blacklist:
blacklist dm_raid45
blacklist dm_message
blacklist dm_log
blacklist dm_log
blacklist dm_mod
[Code]...
I have a dedicated server. It doesn't have any GUI (gnome or something like that), so i need to use terminal, which is hard for a non-advanced user. So i have a few questions:I'm hosting a CS server and a few other servers later on. But right now only CS server. With it i need to start another perl window, which updates the stats to the website and database.So how can i start both server, that program and maybe use the console at the same time?Another question is: when i quit the server, it automatically restarts. How can i just kill the process? I don't want to restart my server every time i want to shut down the CS one.
About perl: how can i install per modules and how can i know the translations of perl modules from windows to linux names?And is there any firewalls by default clean installation, which might 27500 port and any connections trough 3306 to the database on my web server? If no, how come, that my program is unable to connect to my website database?Will my own email server take a lot of resources? Which only i would use and wouldn't receive much mail? And are there any guides how can i do that?Will a web server, which wouldn't take much visitors each day take a lot of resources?
After update to 5.3 and reboot I got this error. googling for it I found that it is a known bug in kernel REHL 5.3 and there is also a patch for it [URL]. I am very new to linux, so how to apply, or just wait for a new kernel?
View 4 Replies View RelatedI'm newbie with Centos. I have got a server with Centos 5.2 and I need to use PHP 5 >= 5.1.0 function as timezone_open. So that, I follow this guide to update php. Now, I have got PHP 5.1.6 (cli) (built: Mar 31 2010 02:44:37). I create a simple test.php: Quote:<?php $var = timezone_open('UTC');print_r($var);?>
View 3 Replies View Relatedso I was trying to do sheduled updates on server, which is doing xen virtualization
doing kernel update (to 2.6.18-164.el5xen) i got the following error:
Running Transaction
Installing : kernel-xen [1/1]
grubby fatal error: unable to find a suitable template
and of course new kernel doesn't appears in grub.conf and don't know what is cause of this problem last kernel i was updateting in August and as i remember everything went just fine:
current kernel:
2.6.18-128.4.1.el5xen #1 SMP Tue Aug 4 21:33:24 EDT 2009 i686 i686 i386 GNU/Linux
#cat /boot/grub/grub.conf
# grub.conf generated by anaconda
[code]....
also could it be because running kernel is removed?also could it be because of LABEL entry, not /dev/... ( as i found out it was such bug, some years time ago)
CentOS 5.4
/etc/init.d/dovecot start
Starting Dovecot Imap: Fatal: Protocol pop3 given more than once
I have a situation where there are no logs in /var/log/messages and this has happened the second time during two weeks.
Snapshot of the screen was taken when this happened and the server was restarted. Since it's a time sensitive matter.
Snapshot:[url]
I keep getting things like code...
but i already do
yum groupinstall "Development Tools"
yum install kernel-devel
commands.
I just reinstall my centos, and in the previous installation I used the virtual box without problems. that is giving wrong this time?
(i had tried the .run installer and the rpm installer but all lead the same.)