CentOS 5 :: VMWare Unable To Find Kernel Header Modules
Mar 7, 2009
I just installed a fresh CentOS 5.2 32bit system. I used "The Perfect Server" server document from Howtoforge and went through those steps and then added Webmin administration console. I then tried to install VMware Workstation 6.5 onto the system. I downloaded the latest VMware bundle, ran it and everything went fine. I then try to run vmware and I get the following messages
C header files matching your running kernel were not found
Before youcan run VMware Workstation, several modules must be compiled and loaded into the running kernel
Kernel Headers 2.6.18-92.1.22.el5.centos.plusPAE
Kernel headers for version 2.6.18-92.1.22.el5.centos.plusPAE were not found. If you installed them in non-default path you can..
View 6 Replies
ADVERTISEMENT
Jul 28, 2009
I am running a vmware on a 64 bit fedora 9. I have already installed kernel header, but the vmware could not find the kernel header, and ask to input the kernel header path. I added /usr/include to the vmware, it complained not a right kernel header.
View 1 Replies
View Related
Sep 21, 2010
im running suse 11.3_x64 clean install along side with Win7 Pro _x64 had a big fight installing Vbox 3.2.8 PUEL edition but i need to test some VMWare products like 'VMWare vShpere (ESXi 4..0.1 - which i couldn't install in a vm in Vbox) ' before putting it in production enviroment in some of my clients. version: VMware-Workstation-Full-7.0.0-203739.x86_64 The installation of vmware was quite simple with no errors. the problem kicks in after the first reboot when i try to run it. before installing vmware i installed the following:
[Code]..
When i try to run vmware workstation the 1st error kicks in: Before you can run vmware, several modules must be compiled and loaded into the running kernel:
[Code]...
View 9 Replies
View Related
Mar 23, 2011
I was trying to install VirtualBox through the YaST > Software Management but it is not working, someone in the forum told me that I have to download the OSE version and do it manual way. Finally I am able to start up VB but not able to use the network connection. Thus I am trying to do this:
/etc/init.d/vboxdrv setup. I get this error:
[code]...
When I type dmesg, it shows me a bunch of info which I don't know what should look for. When I type modprobe vboxnetflt, I get the error: FATAL: Error inserting vboxnetflt (/lib/modules/2.6.37.1-1.2-default/updates/vboxnetflt.ko): Invalid module format. what should I do in order to get my VB to be able to connect to the internet?
View 5 Replies
View Related
Jun 11, 2010
I am using ubuntu 9.10 and the vmware player 3 was working fine. But after the kernel headers updated to 2.6.31-22 the vmware player shows the pop up and says it cannot find the kernel headers. But actually, the linux-headers-2.6.31-22-generic are installed. I tried to re-install the vmware player but with no sucess. Is there any way to correct this error.
View 2 Replies
View Related
Mar 31, 2011
I'm running BackTrack4r2 which is based on Intrepid. I'm pulling my hair out over this problem. As I try to install VMWare Server 2.0 I'm getting stuck at a question the installer poses: Where are the kernel header files located? It would make sense that they're in /usr/src/linux-2.6.35.8 but when I put that it just says there's no subfolder "linux" as expected and to try again. If I use the default location that VMWare says (/lib/modules/2.6.35.8/build/include) I get an error:
[code]...
View 4 Replies
View Related
Aug 4, 2011
System. fedora 15, fully updated Kernel 2.6.40-4.fc15.X86_64
64 bit. Gnome 3
The other day I installed VMware Player on the system when the Kernel was 2.6.38.8-32.fc15.x86_64. On running VMware player after installing the kernel-headers and gcc files the program ran fine (I did not try to install the VMware Tools). I also have not loaded the guess OS as yet.
toady I did and update in which the kernel was updated. I checked to ensure the Kernel-headers were also updated for the latest kernel.
After rebooting the machine the running kernel was then 2.6.40-4.fc15.x86_64. I then tried to start VMware Player. It indicated because the kernel was changed it needed to install new kernel modules, OK, It open the module screen and then crashed.
The log says it can not compile Vmmon which is the first module. it does not go any further.
Tried to installed a new copy of VMware Player over the old one but this only resulted in the same error messages.
Any ideas on how to fix this.
View 13 Replies
View Related
Aug 4, 2011
Since new kernel 3.0 update I cannot rebuild vmware modules
Quote:
sudo vmware-modconfig --console --install-all Unable to initialize kernel module configuration
how to do that. Where do I insert the "CONFIG_LOCALVERSION" line.
Quote:
Same here. This seems to be due to the kernel version being "3.0" instead of "3.0.0". Recompiling the Kernel (and all modules based on it, e.g. nvidia) with
CONFIG_LOCALVERSION=".0-ARCH" allows me to compile the modules and run VMware.
View 4 Replies
View Related
Mar 16, 2010
Yet another problem I have. Suse is taking a while to learn but I swear I'm getting there. Can pritty much do everything by CLI now. I'm trying to run VMware Workstation 6.5 on OpenSuse 11.2, Gnome. I had it running fine but then needed to do a system re-install and upon installation this time I get a error saying it's is Unable To Build Kernel Module and reffers me to a error log. The error log says:
Code:
Mar 14 22:07:51.420: app| Log for VMware Workstation pid=6136 version=6.5.0 build=build-118166 option=Release
[code]....
View 1 Replies
View Related
Nov 25, 2010
I have installed VMware (VMware-Player-3.0.1-227600.x86_64.bundle) on my laptop. When I open Vmware from Applications/System Tools/VMware Player.I get a window that says: VMware Kernel Module Updater Before you can run VMware, several modules must be compiled and loaded into the running kernel.When I click on install and after putting in my passwd.a window comes up with a list:
Compiling:
Virtual Machine Monitor
Virtual Network Device
VMware Blocking Filesystem
Virtual Machine Communication Interface
VMCI Sockets
But it just try the first one and show an error (window) that says.unable to build kernel module see log file /tmp/vmware-root/setup-9572.log for details.I cannot even go into the folder vmware-root because it says I do not have permissions even though am an administrator.
View 9 Replies
View Related
Jun 6, 2011
I want to install debian on vmware workstation 7.1.4 but there's a problem! when I try to install vmware tools or open-vm, it can't complete compile modules of vmware. It is a big problem... It seem problem of kernel version after 2.6.37... But I can't find solution. logs.... Before you can compile modules, you need to have the following installed...
[Code].....
View 2 Replies
View Related
May 31, 2011
I have been asked to write a program to extract the width and height values from .gif, .jpg and .png files. For .gif I was able to find the values in the header records, but it is not so straight forward for the other two formats.
Does anyone know if there is a Linux utility that will do this for me?
View 3 Replies
View Related
Jul 22, 2010
I am trying to setup Slacware 13.1 x86_64 to a encrypted partition. I used the README_CRYPT.TXT howto : [URL] At the step when I create an initrd.gz I get this error: Quote: ERROR: No /lib/modules/2.6.33.4-smp kernel modules tree found for kernel "2.6.33.4-smp"
I tried to look into the directory and there was only modules under 2.6.44.3. So I tried to change the command into: Quote: mkinitrd -c -k 2.6.33.4 -m ext3 -f ext3 -r cryptroot -C /dev/sda2
This command was successful, but I don't know if this is alright. I made the changes in lilo.conf, add initrd = initrd.gz. This is all on unencrypted /boot partition. The boot=/dev/sda1 I also set for the unencrypted boot partition. When I boot the system I get a kernel panic:
[Code]....
View 5 Replies
View Related
Aug 3, 2010
Used to work perfectly. I attempted to install VPN client, result is can't connect to anything. Networks are seen by network manager, nothing happens when click connect. Results below:
Wireless LAN present in Hardware information. Atheros AR242x 802.11abg Wireless PCI Express Adapter (wlan0)
Kernel Driver: ath5k
168c:001c
/var/log/boot.msg
[code]....
Advice is to use output of dmesg command to find problem, but as above I don't get any results for this in terminal.
attempt to ping external site
linux-cfi6:~ # ping -c 66.70.73.150
Usage: ping [-LRUbdfnqrvVaA] [-c count] [-i interval] [-w deadline]
[code]....
View 1 Replies
View Related
May 28, 2009
I keep getting things like code...
but i already do
yum groupinstall "Development Tools"
yum install kernel-devel
commands.
I just reinstall my centos, and in the previous installation I used the virtual box without problems. that is giving wrong this time?
(i had tried the .run installer and the rpm installer but all lead the same.)
View 5 Replies
View Related
Apr 26, 2011
After compiling the linux kernel VMware is unable to compile it's modules.
I installed the kernel source to code...
C header files matching your running kernel where not found
Any ideas how to solve?
View 6 Replies
View Related
Apr 25, 2011
I am trying to install Centos5.6 on an older machine which has a 3com NIC. how I can get the kernel modules for this nic, or do I have to compile a new kernel with this enabled?
View 19 Replies
View Related
Jan 11, 2011
I have installed Arch Linux quite a few weeks ago; but I'm still trying my best to install the nividia display driver for my graphics card (nVidia Geforce 2 MX 400). Not only in Arch but have tried installing on other distros and still failed. I have read up all the documentations and I still find it hard to do this task. When I used the terminal and executed the NVIDIA-Linux-x86-94.43.01-pkg1.run file without any window manager running, I get this problem:
ERROR: Unable to determine the version of the kernel sources located in '/lib/modules/2.6.35-ARCH/build'. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat Linux systems, for example, be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. If you know the correct kernel source files are installed, you may specify the kernel source path with the '--kernel-source-path' command line option.
ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at nvidia.com.
Now I'm using Arch Linux Kernel 2.6.35 and I have got the source. But where am I suppose to put it now? I do not want to change the kernel. I just want the nVidia installer to identify that there is a kernel source so that it can install. I have searched up a lot on websites and ended up with no proper guide.
This is a very old driver. So since now I have the nVidia driver installation package and also the kernel source,
View 9 Replies
View Related
Jun 15, 2011
I have, for days, been trying to get a Fedora 15 server to send audio output to the system monitor, an ASUS VH242H, via HDMI. The video portion works perfectly, allowing me to appreciate GNOME 3 for the first time. Sound, on the other hand, is non-existent.
From many, many threads on this problem, I have at least been able to provide some info which might help resolve this. Unfortunately, I have now read too much and followed too many suggestions to be able to find my way through the morass. So, once again, I built a completely new system to ensure a clean start.
Note also that to simplify things, I disabled the on-board audio in BIOS so only Nvidia has any sound output capability. Initially, 'alsamixer -V all' identifies the card and the chip as being PulseAudio. That would change if I used the <F6> option but I have not done so to keep things 'clean' at this point. The 'Master' is full on (100<>100), so muting is not a problem. Next, I searched for the device from the output of /proc/asound/card0 which would match the monitor.
The one device associated with the monitor_name is eld#3.0:
monitor_present 1
eld_valid 1
monitor_name ASUS VH242H
[code]...
Both the kernel driver and the kernel modules are not what I think I should have. The kernel driver should be HDA NVidia for starters, no? Running modprobe -l and looking for nvidia returns:
'kernel/drivers /video/nvidia/nvidiafb.ko'and 'extra/nvidia/nvidia.ko' But I have not attempted anything beyond this point because I am just too confused as to what needs to be done and who or what manages these values effectively.
View 5 Replies
View Related
Nov 6, 2010
I have an i5 Thinkpad running Windows 7 64-bit. VT is enabled in the BIOS. I have installed vmware server v 2.0.2 but am unable to install Centos 5.5 x86_64 as a guest OS. The steps that I followed are as follows:1. Created a new VM, specifying RHEL 5 64-bit as the intended guest OS (per vmware documentation - Centos is not available as a selection2. Downloaded all 8 iso files for Centos v5.5 64-bit3. Modified the CD/DVD drive to 'connect at power' and use an iso with the path pointing to the x86_64 iso 1 of 8When I power up the VM, the console window displays 'ISOLINUX 3.11 2005-09-02 Copyright (C) 1994-2005 H. Peter Anvin' and nothing else. The installation splash screen never appears. As a test, I downloaded the first of 7 iso files for the 32-bit version of Centos 5.5 and pointed the CD/DVD drive to that iso. In that case, the installation starts as expected. I would really like to get the 64-bit version installed and running.
View 3 Replies
View Related
Mar 29, 2010
I have a Centos 4.8 linuxbox running in VMWare ESXi 4 and the kernel is 2.6.9-89.0.11.ELsmp. Recently, this linuxbox is quite unstable, it has kernel panic once a week... But we didn't have any configuration changes on it. And I have attached the kernel panic console screen and lsmod for the server.[URL]...
View 2 Replies
View Related
Nov 9, 2010
I have a fresh installation of Fedora14_x64 and after that I have updated the OS also.
Then I have installed VMware-Player-3.1.2-301548.x86_64.
All the installation procedure has completed successfully without any error.
But when I am going to run VMWare It is throwing some error.
I am attaching all the needed screenshot and log file also.
View 7 Replies
View Related
Aug 7, 2010
I'm unable to boot the LFS-6.6 which i've built on a vmware workstation 6.5. i had no trouble in installing all the packages and have managed to run all the test suites successfully w.r.t stable LFS-6.6. while booting i get 'kernel panic' and it says unknown device /dev/sda1 and unknow block (0,0). i've only one primary partition without any swap partition. i've a label assigned to /dev/sda1 and have included it in my fstab file. device.map shows 2 entries:
One for the floppy and the other for my harddisk which is- hd0 /dev/sda. this is for the 2nd time i'm stuck at a point after perfectly installing all the stuff as mentioned in the LFS-6.6 book. i've also noticed on this website the many users have similar type of issue. it would be great if somebody could help me.
note: while configuring the linux, i've inbuilt everything required for my system, including support for ramfs and other required filesystems, scsi driver etc.
My host machine is on a intel core 2 duo processor. my virtual scsi hard disk is 3 GB in size and is a ext3 fs. scsi is configured with LSI Logic which is recommended by vmware while adding an hard-disk.
View 14 Replies
View Related
Dec 28, 2009
I've installed Fedora 12 (KDE version) on VMware workstation running under Windows 7.
I've been able to configure the VMware tools fine up until this point:
Code:
What is the location of the directory of C header files that match your running kernel? After some searching online I deduced I should install all of the latest updates and kernel-devel.
I then nuked the previous VMware tools install and started over with it again, but alas, no directory I try works (i.e. /usr/src/kernels/, /usr/src/kernels/2.6.31.5-127.fc12.i686/ and so forth).
View 8 Replies
View Related
Feb 1, 2010
I have an Intel i7 with CentOS x64 installed, with the intention of using it as the host O/S with VMWare Workstation to run a number of virtual machines. I had this all working until the kernel was updated to 2.6.18-164.11.1.el5, Now I can no longer start any VMs. I have tried reinstalling CentOS, updating it first, then installing VMWare Workstation - no different. I have tried running as root - no different.
Is anyone else aware of this problem? Does anyone else run VMWare on CentOS x64?
View 19 Replies
View Related
Jul 4, 2010
2.6.18-194.8.1.el5xen is the reported kernel that I'm running while the headers that are installed are listed as 2.6.18-194.8.1.el5-i686. I assume these are the same, or at least close enough that it shouldn't matter.
However, when I run vmware-config-tools.pl to configure it it says it cannot find the kernel headers. I've tried pointing it to /usr/src/2.6.18-194.8.1.el5-i686/ and /usr/src/2.6.18-194.8.1.el5-i686/include (not sure which of the two I'm supposed to do as online instructions contradict one another) it says that is invalid and there seems to be no way to force it since it just complains without letting me use it anyway. What can I do? Running centos 5 btw on vmware workstation 7.
View 4 Replies
View Related
Apr 26, 2009
I can install VMware Server 2.0.1 on CentOS 5.3 (32-bit and 64-bit) perfectly. However, I can't access Server's web interface by going to port 8222 on the machine's IP address. When CentOS 5.3 (32 or 64-bit) is loading, I am greeted with this message "VM communication interface socket family: vsock: no version for "VMCIDatagram_Send" found: kernel tainted." I assume this is the reason why I can't access my Server through a web browser. How do I correct this? Is there a package I need to install on CentOS prior to installation of Server 2.0.1?
It's strange, because I can install 2.0.1 on Ubuntu Server 8.10 with absolutely no problem and access its web interface. So I think this might be a CentOS-specific issue I've uncovered.
View 7 Replies
View Related
Jun 22, 2010
i have lot of google search and make lot of suggestion found in google but without any solving for the problem. try to install vmware workstation any verion on my vps which have openvz and kernel 2.6.18-164.15.1.el5.028stab068.9-x86_64 when try to install for exampil vmware workstation 5.5.3 found this problem
root@server [~]# vmware-config.pl
Making sure services for VMware Workstation are stopped.
Stopping VMware services:
Virtual machine monitor [ OK ]
Configuring fallback GTK+ 2.4 libraries.
In which directory do you want to install the mime type icons?
[/usr/share/icons]
[Code]...
View 4 Replies
View Related
Aug 1, 2011
I installed VMWare WorkStation 7.x.x . When It started that I have taken "Kernel Header" error and It want to enter path of Kernel. I tried many commands ;
yum -y gcc kernel header
uname -r
2.6.18-238.19.1.el5xen
rpm -qa kernel-devel
kernel-devel-2.6.18-238.19.1.el5
Actually, It uses same kernel but VMWare is not working. I searched about Kernel Headers error when run VMWare on Internet. But I couldn't solve my problem.
View 4 Replies
View Related
May 5, 2010
I recently started to use Ubuntu in VWware player on my windows-XP. I installed ubuntu 10.04 few days ago, It was working fine.
Yesterday, I compile a new kernel, kernel 2.6.33 in my vmware ubuntu 10.04. Everything went well till I did reboot. before reboot I use the command "update-grub" to make it compatible to the new kernel. BUT... after rebooting, I have a problem in loading a grub correctly. it gives me following message " [2.149136 ]kernel panic - not syncing: VFS: unable to mount root fs on unknown-block(0,0)" and I can not proceed further. I have my all data on it. I also tried to boot it from live CD but unfortunately, I can't mount the hard disk on it in order to get those data from my old Ubuntu set up.
View 4 Replies
View Related
