I keep getting things like code...
but i already do
yum groupinstall "Development Tools"
yum install kernel-devel
commands.
I just reinstall my centos, and in the previous installation I used the virtual box without problems. that is giving wrong this time?
(i had tried the .run installer and the rpm installer but all lead the same.)
what is happening on my Centos virtual server (ps I'm having a great time re-learning Linux after a large gap and usually try and find out myself but this has me confused) First thing I did was install Tomcat and try and change the port to 80 using iptables -nat and it complained a kernel module was missing. Instead setup Apache to redirect requests so that's now working I then tried to install CSF firewall and the validation perl script returned fatal errors so I assumed OK my virtual server Kernel is restricted and used denyhosts instead which is working great
Here's the confusion.. I later retried the csftest script and it now works including all the iptables and nat stuff that fataled before. I've not rebooted or changed anything except run denyhosts and the postgres daemon + ended a few daemons that I didn't need (eg pickup,tlsmgr,courier,postfix,qmgr,saslauthd) Running lsmod returns nothing and /proc/modules is zero bytes so I'm not able to tell what is loaded? I'm tempted to try and get Tomcat redirecting via iptables and see what happens but if it works I don't like that something seems to have changed.. before I ran it direct as root now I'm SU into root from another login
I am trying to setup Slacware 13.1 x86_64 to a encrypted partition. I used the README_CRYPT.TXT howto : [URL] At the step when I create an initrd.gz I get this error: Quote: ERROR: No /lib/modules/2.6.33.4-smp kernel modules tree found for kernel "2.6.33.4-smp"
I tried to look into the directory and there was only modules under 2.6.44.3. So I tried to change the command into: Quote: mkinitrd -c -k 2.6.33.4 -m ext3 -f ext3 -r cryptroot -C /dev/sda2
This command was successful, but I don't know if this is alright. I made the changes in lilo.conf, add initrd = initrd.gz. This is all on unencrypted /boot partition. The boot=/dev/sda1 I also set for the unencrypted boot partition. When I boot the system I get a kernel panic:
[Code]....
I was trying to install VirtualBox through the YaST > Software Management but it is not working, someone in the forum told me that I have to download the OSE version and do it manual way. Finally I am able to start up VB but not able to use the network connection. Thus I am trying to do this:
/etc/init.d/vboxdrv setup. I get this error:
[code]...
When I type dmesg, it shows me a bunch of info which I don't know what should look for. When I type modprobe vboxnetflt, I get the error: FATAL: Error inserting vboxnetflt (/lib/modules/2.6.37.1-1.2-default/updates/vboxnetflt.ko): Invalid module format. what should I do in order to get my VB to be able to connect to the internet?
I just installed a fresh CentOS 5.2 32bit system. I used "The Perfect Server" server document from Howtoforge and went through those steps and then added Webmin administration console. I then tried to install VMware Workstation 6.5 onto the system. I downloaded the latest VMware bundle, ran it and everything went fine. I then try to run vmware and I get the following messages
C header files matching your running kernel were not found
Before youcan run VMware Workstation, several modules must be compiled and loaded into the running kernel
Kernel Headers 2.6.18-92.1.22.el5.centos.plusPAE
Kernel headers for version 2.6.18-92.1.22.el5.centos.plusPAE were not found. If you installed them in non-default path you can..
I am trying to install Centos5.6 on an older machine which has a 3com NIC. how I can get the kernel modules for this nic, or do I have to compile a new kernel with this enabled?
View 19 Replies View Relatedhow to make virtual machine using xen kernel and nfs.
View 1 Replies View Relatedi want to make my centos5 a virtual SAN (storage).
View 1 Replies View RelatedI installed the Centos 5.5 with XEN and put 03 virtual machines (Centos 5.5 too). I did this correctly, but I have a problem. In the virtual machine, I need update the kernel. I used "yum update kernel" and this is downloaded correctly and the menu.lst file is updated too, but the kernel not ran. I ran "grub-install /dev/sda" or "grub-install /dev/xvda" and received a error return. I read the device.map file and i ran "grub-install /dev/sde" and received a error return too.
The errors:
[root@vm01 ~]# grub-install /dev/sda
/dev/sda: Not found or not a block device.
[root@vm01 ~]# grub-install /dev/sde
/dev/sda1 does not have any corresponding BIOS drive.
[root@vm01 ~]# grub-install /dev/xvda
/dev/xvda: Not found or not a block device.
I need to modify fs/open.c and fs/read_write.c to make my modifications. I cannot find any options in 'make menuconfig' to make these files modules rather than compiled elements. I'm thinking these cannot be modules because the file system won't work without open.c and read_write.c. Is this correct - I cannot compile fs/open.c and fs/read_write.c as modules, only as compiled elements? Or, is there some way for a module to overwrite these routines when the module is installed and re-enable the routines when the module is removed?
View 3 Replies View RelatedI installed openSUSE 11.2 on virtualbox. My host is windows 7. I tried to install the guest additions, but i get an error saying
Code:
Building VirtualBox Guest Additions Kernel Modules...Failed
(Your system does not seem to be set up to build kernel modules)
How should i go about to let my system build kernel modules?
how can i make 1000fps stable kernel
View 2 Replies View RelatedIn linux kernel compilation steps what is difference in the functionality of 'make' and 'make modules' with respect to file system
View 3 Replies View RelatedI have just compiled a new kernel. When I boot into this new kernel and do an lsmod it is only running two modules. The only thing I changed in the configuration file was to compile ext4 file system into the kernel. My computer is an HP Pavilion dv4. The two modules are lirc_ene0100 and lirc_dev. I am running Ubuntu 10.04. The new kernel is 2.6.32.15+drm33.5. The kernel seems to work fine but I need to know why and how it can only be running two modules.
View 1 Replies View RelatedAfter reading all the forum entries and tutorials I could find, which all make it sound very easy to do, however I type the command 'make' in the folder where I have the "rtl8192su_linux_2.4_2.6.0003.1019.2009.tar.gz " unzipped and get the following output:
make[1]: Entering directory `/lib/modules/2.6.35.6-45.fc14.i686/build'
make[1]: *** No rule to make target `modules'. Stop.
make[1]: Leaving directory `/lib/modules/2.6.35.6-45.fc14.i686/build'
[code]....
I am getting this following error when I do compilation..Please let me know what is missing
ubuntu@ubuntu-desktop:/home/swamy/ttviewer/uvcvideo-2.6.32$ make
make -C /lib/modules/2.6.31-203-gee1fdae/build SUBDIRS=/home/swamy/ttviewer/uvcvideo-2.6.32 modules
make[1]: Entering directory `/usr/src/linux'
[code]....
I'm trying to install VMWare server on my Kubuntu box and it's telling me there are 3 "kernel modules" that it needs me to remove (apparently they were installed previously and VMWare isn't liking that).How do I remove them? Never messed with the kernel modules before.
View 4 Replies View RelatedI recently updated the kernel from SLES 11 to SLES 11 SP1 .However my kernel modules are not getting loaded and they throw an error such as shown below:"Errornserting mii : Unknown symbol in module, or unknown parameter (see dmesg)"
View 8 Replies View RelatedI am writing a kernel module which need to do something at some interval. Now this problem can be solved by using a user process, which will send signal to the kernel and the kernel would do accordingly. But it would be nice, i could do it within the kernel module itself. Is there any way to use SIGNALs inside the kernel module?
View 3 Replies View RelatedI am trying to write kernel modules. And am running Ubuntu 10.04 x64. I have downloaded both kernel source and headers. Unpacked kernel source and made a /usr/src/linux symbolic link pointing to the src. Here is the output of running make:
Code:
make -C /lib/modules/2.6.32-22-generic/build M= modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.32-22-generic'
CHK include/linux/version.h
CHK include/linux/utsrelease.h
[code]....
I am taking both the module and the Makefile from Linux Kernel Module Programming Guide book. I don't know what am missing.
i'm trying to install driver for some PCI device but i have problems with it - when i run it it gives me an error
Code: Select allmake: Entering directory `/lib/modules/2.6.32-5-686/build'
make: *** No rule to make target `modules'. Stop.
make: Leaving directory `/lib/modules/2.6.32-5-686/build'
i've tried to find solution in internets but have no success usually they say that problem is that ppl forget to download kernel-headers and kernel-sources or unpack kernel-sources or make symlink usr/src/linux but i've done it all and the result is the same.i think the root of problem is that `/lib/modules/ 2.6.32-5-686/build' folder is empty but there have to be this RULE, so what i have to do to have it there? my system is Debian 6.0.10 Squeeze, Kernel 2.6.32-5-686.
How do I get modules in the Kernel to load automatically at boottime? I''m specifically trying to get i810fb to load during the boot process. In Ubuntu, I just had to edit a file and update my initramfs. How do I do this in Fedora?
View 5 Replies View RelatedThe new kernel upgrade on Fedora 14 will not boot. lib/modules do not exist is the message. Grub was adjusted to match the old kernel, and the new kernel when booting says lib/modules do not exist. The old kernel has twice as many modules as the new kernel in lib/modules. How do I get the new modules to install so I can boot with the new kernel then? Should I reinstall the new kernel?
View 2 Replies View RelatedI am having some issues compiling kernel modules against the pre-built OpenSUSE kernel. Whenever I compile a module and try to load it, I get something like:
Code:
insmod fs/smbfs/smbfs.ko
insmod: error inserting 'fs/smbfs/smbfs.ko': -1 Invalid module format
It doesn't actually matter what the module is, they all do the same thing. I have tried the above mentioned smbfs, I've also tried:vmware kernel module
[Code]...
I have an x86 pc and installed lucid these are the details of my distribution version:
I am trying to build a kernel module i am getting the following error:
How to build kernel modules
I am attempting to compile the linux-2.6.35.13 kernel from kernel.org to use with an installation of Fedora 14 (2.6.35.11-83.fc14.x86_64). I've done this before with different kernel versions for older versions of Fedora, but I've encountered a new problem this time. Whenever I get to the "make install" step, I get the following:Quote:
sh /home/user/testing/source/linux-2.6.35.13/arch/x86/boot/install.sh 2.6.35.13 arch/x86/boot/bzImage
System.map "/boot"
[code]...
It has been years since I have need to compile the kernel or its modules. Here goes: I recently upgraded to ubuntu 10.10 and needed the kernel source and its modules source. The relevant directories are in a mess. Several diff versions, broken links, the works. Is there a nice easy way, to remove all of the sources, there, and err "install" the ones for my latest kernel, in the correct places. Then I might have a chance at getting the two modules I need complied! Nvidia being one for the geforce 4 mx420 nv17
View 4 Replies View RelatedI'm having a problem getting firewire modules to load. Basically, I need firewire_core and firewire_ohci so I can use dvgrab. I tried the following:
Code:
[root@x:/]# modprobe firewire_core
[root@x:/]# modprobe firewire_ohci
But the modules aren't showing with lsmod:
[Code]...
I only have basic experience recompiling a Linux kernel, and I have a question about adding dynamic modules.In case I want to add a brand new module, do I need to recompile the kernel to include a reference to that new module, or is simply compiling a kernel with generic support of dynamic modules all it takes to add whatever modules I need later on, without recompiling the kernel and rebooting the host?
View 2 Replies View RelatedI need to debug "ls". I downloaded coreutils and compiled them in debug mode."ls" uses readdir() kernel API to fetch files/directories from a file system. readdir() fetch data from any file system (suppose FAT or ext3).I have debug version of FAT/ext3 and installed, I also have debug version of coreutils (ls) as well.Now I want to debug from "ls" to "FAT/ext3 readdir()".How to do that?
View 6 Replies View Related