CentOS 5 :: Can Ping Webserver But Can't Load Website
Jul 29, 2010
Im running drupal on my webserver and, this morning all of the sudden I went to edit a node and now I cant load the website in my browser at all. I can ping the machine and SSH into it fine, but it will not load the website in chrome or IE, I have no idea whats going on here.
Edit: I did a 'service httpd restart', it took 3mins to restart, is this normal? After I did that it loaded once, not even all of the page, now its doing the same thing again.
I have 4 centos5 apache webservers all on the same network, recently, 2 of the webservers have stopped being able to ping or browse one particular website where feeds are obtained from this site. I have checked and firewall and selinux settings are disabled. The two webservers are able to ping and browse other sites. Dns settings are the same for all 4 servers. traceroute for working and not working webservers are the same.
I am trying to install a router on my CentOS 5 box, while i have properly configured IP address, Subnet, Default GW and DNS, I am at the point of trying to set up the Proxy. I have added a line: "proxy=http:ip_address:8080/" to the file of "/etc/yum.conf" The Proxy server here does not require any username nor password however I still cannot ping any website, while I tried to ping 74.125.45.100 (google.com) it returns the following message:
I am using KVM and created four guest Operating systems on it.The server host is Ubuntu 10.04.I am using 4 websites in a reverse proxy environment.One of our website is running on CentOS VM.Right now there is no traffic on the website static HTML pages.I do not have any clue as why it was taking longer time to be accessed.
I've actually gotten a webserver (hardy heron, server edition) working before and had a Joomla site up I could find on the net. But I did a fresh install of Lucid Lynx (desktop edition, that I added some packages to to use as a server). Between the router (wrong ip address?), port forwarding (set right?), my domain nameservers (godaddy) and the DynDNS service I use (for dynamic ip) I must have a wrong setting because, my joomla website shows up at localhost, but not 'out there' so to speak. I would like to get this site out there and working soon, as it's one I'm just doing free for a Community Garden.
When i open one of the web browsers i use and try to load a web site it's taking to long to respond and sometimes it doesnt load the website at all. I have tried with firefox,epiphany,opera with all the same results. I am sure that this is not a problem with my internet connection because i don't have these problems with windows.Also the network manager connection settings are correct
I also tried choosing the old kernel(2.6.32.24) to boot from but no success.The problem is the same as if i am using the 2.6.32.25 kernel. The strange thing is that i can download packages from synaptic with full speed. Last think.I have recently downloaded the recommended updates from the update manager but i don't remember what are the things that where updated.
My webserver accesses a backend mySQL server using CentOS5
The last week, I have been getting a "page Load Error" on my web server whilst others told me they are getting a "broken link" error when they try to access my web site. It has been working fine for the last 12 months until last week.
ADSL, modem and router okay according to service provider (verizon)
I can ping my IP address and my domain name.
# netstat -tap
shows http and https both processes running.
# service httpd restart no issues
I shut down firewall and tried again, but got the same "page load error".
I upgraded webserver to new ubuntu server 10.04 (x86-64). After upgrade the increased load from 0,3 to 1,4. On webserver running phpbb, which generating slow quieres, which not before upgrade to lucid. HW conf: Intel Core i7, 8GB ram, WD Raptor 10k rpm. Week17 upgrade to new version.
When I try to ping with the terminal to check a website's availability, it always just keeps going on and on and on... How do I get it to stop after a set amount of pings? Is there some type of command?
i can ping to 192.168.10.104 but can't access it graphically.i am using firefox.. distro is ubuntu.. i do //192.168.10.104:9345..but it takes no response.can u help me.. i am using direct connection..
I am using an virtual machine. where I need to ping from one machine to another. earlier I was able to ping. But after going to google.com once, I cannot ping back to this machine.
But if I gave ping -I eth1 <IP> then I can ping.
I cannot install any package, so tell me solution which includes not installing any package.
Ok let's say I have Apache Webservers on 2 different machines within my network, I have http://outterABC.com setup at dyndns.org to point to my modem at home, and my router forwards Port 80 to the ServerA Machine (i.e. 192.168.0.3). I can access my webpage I setup for the Server A Machine.
But what I want to try and do is somehow access my ServerB machine's website that is on my same network. I tried something like this http://ServerB.outterABC.com and the apache page came up with something like the page wasn't available. I want to access the content of the ServerB website, but because I have only one router, i can only forward Port 80 site traffic to my ServerA machine's website. I'm sure it's a different syntax I should use but i'm just not sure what I should enter to bring up the apache root web page for the Server B website via http://outterABC.com
I tried setting up DNS A records on ServerA, but I don't think it will work with what i'm trying to do above.
Ever since switching to openSUSE 11.1, I have been having problems with certain websites (using the version of Firefox that came with openSUSE 11.1). Some website's CSS code won't load until repeated reloads - for example, wachovia.com. I'll visit the website and it will be all distorted because the stylesheets did not load, and I will have to refresh a number of times before it becomes usable. Other website's images won't load until multiple refreshes, like facebook.
Is this an openSUSE issue? An openSUSE interaction with Firefox issue? I've never had this problem on XP or Ubuntu.
For some time now it's not loading properly, just get a big blue screen with a title bar. This is using 10.04 64bit with Firefox 3.6.15.I think it's since I upgraded to 10.04.
I am looking for advice on a what I am sure is a very basic procedure but I have never had to set this up before and am not sure where to start.
I am running 2 CentOS5.3 boxes. I have one webserver connected to the internet and behind a firewall. I would like to set up the 2nd server (database) behind the webserver and completely inaccessible from the internet. Ideally so it can only be accessed by first ssh'ing onto the webserver and then ssh'ing from there onto the database. The webserver connecting locally to database.
From what I have seen it looks like I need to set this up using NAT but I have never done this and do not know what is involved. Can someone point me in the right direction and optimally outline the steps I need to take to hook this up? Do I need to worry about any specific hardware configuration as well?
I am having problems with website load speeds. I have fendora 15 and windows loaded on my machine. When I am in windows the internet connection is fine but when I am in fedora everything is slow. I am connecting wirelessly to a netgear router using a D-Link DWA-552 XtremeN Desktop Adapter
I have not installed anything for the wireless card.
I have tested my speeds from here [url] and I know that I am getting around 7000kb down.
I have gone into firefox to about:config and set network.dns.disableIPv6 to true... but everything is slow.
I have a dedicated server running Centos 5.2. I have a Wordpress MU site that's setup over apache 2, mysql 5, php5, and I use phpmyadmin as well. I'm able to read the database as my website appears perfectly fine, however, I can not write to it. What exactly do I need to install on my Centos sever to allow my site to interface with the database? I've used shared servers and VPS's with no problems but this just won't work. The support team seems clueless and I'm ready to ask them to reinstall my entire OS and everything else again.
I use VPS because when i was on share hosting. My website was hacked by hacker. Now i'm using VPS. I want to ask how to update webserver application such as Mysql, phpMyAdmin, lighttpd I use centOS 5 i386 and i use Kloxo Panel. I was already installed Mybb.
I previously installed centos using DHCP. Now I purchased a domain name and want to set it up as a webserver. if I choose the static ip address based on the existing DNS server given to me by the domain company, it will ask for the subnet mask, default gateway and i do not have them.
I am trying to configure a BIND DNS server to handle three websites on my home network, (my site, my sons site and our test site). Since my ISP uses dynamic DNS, we are using DNS2GO to redirect our traffic, 9EACH SERVER HAS IT'S OWN VERSION OF dns2go running).My problem is that I can't figure out how to configure BIND since I don't have a static IP to enter into the named.conf or reslov.conf configuration files.
Im trying to make a webserver at home. I have a static IP Address of my ISP (o2) I have built a server ( 2.8 p4HT, 2GB Ram, 500GB HDD) Just to test... But, i dont know what to do in the IP Address settings for the IPv4 ( I think thats what it is) Do i put my static IP address in my ISP gave me, or the local IP of the server ( Wich is 192.168.1.72) Im realy confused. Ive tried everything i can think of, Reinstalled the os about 40 times up to now...
I had no problem installing Ziproxy, as its in the main packages But how to use it? I mean, so far I could find out, to start it, I musst run:ziproxy --daemon ([URL]) My /etc/ziproxy/ziproxy.conf is full of stuff I've found on internet:
[Code]....
But when I run it, and set the Firefox port to:9900 it fails to load any website. The goal is to compress to the maximum the images, and other stuff that uses too much bandwich (like Opera Turbo). I really dont care if a picture is full of pixels, or not. I do not want to use Opera, just to enjoy a fast Internet. I will not install Midori, Iron, Chrome, eLink or Arora. I want to continue with my usual Firefox and opera. The advantage is that in Firefox, I have NoScript, and other several improvements/extensions, which I cant enjoy in Opera.
I think the fault is, to include four different parameters (Address,Port,NextProxy,NextPort) that are probably for the same thing. Also had thought that perhaps there is some way to apply the proxy system-wide, not only in the Firefox settings. Maybe by editing the configuration of Networkmanager?
I have setup a Linux Centos with apache server on it in a home network. Everything works fine. When I access the webserver I put in the address bar the IP address of the server which is 192.168.0.150 and when hit enter, it prompts the page where I have to put login information. The login information is set to: username: admin@localhost.local password: *************
It takes long time for authentication go through and load the page eventhough I am accessing the site in a same home local area network with fast ethernet connection. How can I change the localhost.local to something else like maybe [URL] instead and if I have to change settings in other files as well?
I am using KVM and created four guest Operating systems on it. The server host is Ubuntu 10.04.I am using 4 websites in a reverse proxy environment. One of our website is running on CentOS VM. Right now there is no traffic on the website static HTML pages. I do not have any clue as why it was taking longer time to be accessed.
Can't find any step by step info about moving web site from one server to another. I have to move website from open BSD to CentOS. Maybe somebody can help me with this. All I did is : copied www directory to new server, installed apache, installed php, installed mysql, copied mysql datadase to new server.But website still not loading.
how to turn my computer on and browse the web. I want to host my website form my computer, only problem i don't now how to do it. It will take some time for me to understand this Os. (For now) My question is Can i use xampp linux to host my website using the security of centos. i now how to use xampp but i don't now how to use centos.? try reading around but i connot event find the yum program use to install softwares.
