I use VPS because when i was on share hosting. My website was hacked by hacker. Now i'm using VPS. I want to ask how to update webserver application such as Mysql, phpMyAdmin, lighttpd I use centOS 5 i386 and i use Kloxo Panel. I was already installed Mybb.
View 1 RepliesOk let's say I have Apache Webservers on 2 different machines within my network, I have http://outterABC.com setup at dyndns.org to point to my modem at home, and my router forwards Port 80 to the ServerA Machine (i.e. 192.168.0.3). I can access my webpage I setup for the Server A Machine.
But what I want to try and do is somehow access my ServerB machine's website that is on my same network. I tried something like this http://ServerB.outterABC.com and the apache page came up with something like the page wasn't available. I want to access the content of the ServerB website, but because I have only one router, i can only forward Port 80 site traffic to my ServerA machine's website. I'm sure it's a different syntax I should use but i'm just not sure what I should enter to bring up the apache root web page for the Server B website via http://outterABC.com
I tried setting up DNS A records on ServerA, but I don't think it will work with what i'm trying to do above.
Im trying to make a webserver at home. I have a static IP Address of my ISP (o2) I have built a server ( 2.8 p4HT, 2GB Ram, 500GB HDD) Just to test... But, i dont know what to do in the IP Address settings for the IPv4 ( I think thats what it is) Do i put my static IP address in my ISP gave me, or the local IP of the server ( Wich is 192.168.1.72) Im realy confused. Ive tried everything i can think of, Reinstalled the os about 40 times up to now...
View 1 Replies View RelatedI have 4 centos5 apache webservers all on the same network, recently, 2 of the webservers have stopped being able to ping or browse one particular website where feeds are obtained from this site. I have checked and firewall and selinux settings are disabled. The two webservers are able to ping and browse other sites. Dns settings are the same for all 4 servers. traceroute for working and not working webservers are the same.
View 1 Replies View RelatedI am using centos 5.3 , and also using webserver in local network
Here is all configuration
1, server
eth0 , 222.80.1.90 this is live ip
eth1 10.0.0.1
2, webserver
eth0 10.0.0.2
I want set iptables on server 1 , to acces webserver from other city ,
How to configure iptables
My installation is Fedora 11 with Apache 2.2.15, PHP 5.2.13, mysql 5.1.47 an joomla 1.0.13.When I upgrade to Fedora 13 with preupgrade all seem to be ok, but when I open my website the main site is showing. I can see all the menu but when I open an article there is no text. I log on to joomla and edit the contents and I can see all text. Can anyone give a tip of how to solve this?
View 7 Replies View RelatedIt's always update my local file from web server,which is not my want it.I have beem overwrited by web server many times.It's made me so mad.Is there any way to just only update webserver from local and keep my local files original?
View 1 Replies View RelatedI have to upgrade MySQL 5.0.77-3 to 5.1 for a webaplication.
If I write in Putty "# yam update" , it wont found a newer version of MySQL. how can I update my MySQL Version?
I have written simple application in cpp which listens on port 8080. But when I start the application and check the port it is listening on (using netstat -nap), I can see that the application is listening on port which is > 30000.
This port number keeps on changing if I re-run the application.Please let us know if I have to do any kind of a seeting so that application starts listening on 8080 port.I am using CentOS 5.5 (I tried same on CentOs 5.2)
I am looking for advice on a what I am sure is a very basic procedure but I have never had to set this up before and am not sure where to start.
I am running 2 CentOS5.3 boxes. I have one webserver connected to the internet and behind a firewall. I would like to set up the 2nd server (database) behind the webserver and completely inaccessible from the internet. Ideally so it can only be accessed by first ssh'ing onto the webserver and then ssh'ing from there onto the database. The webserver connecting locally to database.
From what I have seen it looks like I need to set this up using NAT but I have never done this and do not know what is involved. Can someone point me in the right direction and optimally outline the steps I need to take to hook this up? Do I need to worry about any specific hardware configuration as well?
I have added apache application into redhat cluster. If the apache process failed, it will cause the service group fail over. I want to disable the application monitoring. I search throung Internet and it depends on the apache init script. If I change /etc/init.d/httpd status always return 0(success). THe service group will not fail over even apache failed.
However, I want to remain the application monitoring but stop failover. If the application like apache failed, I want Redhat cluster to try restart the application like 3 or 4 times. If restart failed, it will not failover.
What would be the best way to determine memory consumed by each application running on the server?
View 7 Replies View RelatedI have a dedicated server running Centos 5.2. I have a Wordpress MU site that's setup over apache 2, mysql 5, php5, and I use phpmyadmin as well. I'm able to read the database as my website appears perfectly fine, however, I can not write to it. What exactly do I need to install on my Centos sever to allow my site to interface with the database? I've used shared servers and VPS's with no problems but this just won't work. The support team seems clueless and I'm ready to ask them to reinstall my entire OS and everything else again.
View 2 Replies View RelatedIm running drupal on my webserver and, this morning all of the sudden I went to edit a node and now I cant load the website in my browser at all. I can ping the machine and SSH into it fine, but it will not load the website in chrome or IE, I have no idea whats going on here.
Edit: I did a 'service httpd restart', it took 3mins to restart, is this normal? After I did that it loaded once, not even all of the page, now its doing the same thing again.
Edit2: Now it seems to be working fine again...
I previously installed centos using DHCP. Now I purchased a domain name and want to set it up as a webserver. if I choose the static ip address based on the existing DNS server given to me by the domain company, it will ask for the subnet mask, default gateway and i do not have them.
View 6 Replies View RelatedI am trying to configure a BIND DNS server to handle three websites on my home network, (my site, my sons site and our test site). Since my ISP uses dynamic DNS, we are using DNS2GO to redirect our traffic, 9EACH SERVER HAS IT'S OWN VERSION OF dns2go running).My problem is that I can't figure out how to configure BIND since I don't have a static IP to enter into the named.conf or reslov.conf configuration files.
View 7 Replies View RelatedI have setup a Linux Centos with apache server on it in a home network. Everything works fine. When I access the webserver I put in the address bar the IP address of the server which is 192.168.0.150 and when hit enter, it prompts the page where I have to put login information. The login information is set to: username: admin@localhost.local password: *************
It takes long time for authentication go through and load the page eventhough I am accessing the site in a same home local area network with fast ethernet connection. How can I change the localhost.local to something else like maybe [URL] instead and if I have to change settings in other files as well?
I have centos 5.3 workin on mini itx atom 330. i have some problem with the network when i use Samba. when i move big files the network goes down. i wanna to install the new kernel on my centos to try to fix the network problem with the new drivers includes on the new kernel.
View 2 Replies View RelatedWhich distro is the best for a webserver? and are there any specifics I should keep in mind choosing one?
View 1 Replies View RelatedIs there a way to run CentOS 5.2 update system using the shell, avoiding the GUI (I want to do it remotely using SSH?
View 1 Replies View RelatedI have one desktop machine with fedora 11 installed and a Laptop with both linux and Windows Xp. I use the laptop as my client machine.
I want to set up both a dns and web servers on the same machine for testing and practise purposes.
how to do it bcoz I can set up the webserver but I can't browse the website on the Fedora machine when I use my laptop. I have learnt that I should set up a Dns server.
What's the best way to move over 500 sites from a webserver with apache and mysql on the same server.. to a new server?
View 1 Replies View RelatedI am using squid3 on ubuntu server 10.10, publish my webserver running on other machine on ubuntu10.10 desktop. My server is configured for squid3 transparent proxy which is running successfully.
Now I need to publish my other machine which is running with apache2 webserver.The local IP is 192.168.1.5, I need to assign a public IP as 61.8.153.212 provided by ISP.
use my webserver machine outside the LAN using internet, through ubuntu server 10.10 squid3.
I have Centos 5.3 on our server When I log-in in webmin I have a message "Warning - Your system is actually running CentOS Linux version 5.3." In the next line I have a button "Update Detected Operating System" My question is Do I need to click the link and update Detected operating system? If I do, is it going to change any configuration on our server?
View 2 Replies View RelatedI have tried updating my boxes to 4.9 Final issuing the command:
'yum update'
Code:
# CentOS-Base.repo
#
# This file uses a new mirrorlist system developed by the CentOS Team.
[Code]....
im using the guide found here [URL] . and it told me to add the lines
Quote:
[c5-testing]
name=CentOS-5 Testing
baseurl=http://dev.centos.org/centos/$releasever/testing/$basearch/
enabled=1
gpgcheck=1
gpgkey=http://dev.centos.org/centos/RPM-GPG-KEY-CentOS-testing
includepkgs=php*
The server I'm running runs Debian Etch, Squid and Shorewall. Every 24 hours the server gets a new internet IP so I need to use dyndns to keep the dns pointing to the correct PC.
I have a webserver that is running behind the debian server and am having trouble with it. When I enter the web address, it gets a timeout.
I have a dedicated server which I run on him only one website which has about 11k-15k unique visitors per day.
The httpd processes stuck it almost everyday and I can't understand why... I fix it via "killall -9 httpd" and then "service httpd start". code...
I am interested in setting up a webserver on a PC I have laying around...more for the experience and knowledge of learning it from scratch. I have used dedicated servers before with webhosting, but did not do the installations of apache and other items. The server we had purchased had CentOS installed.
My question is, can I use this desktop I have to simply install the CentOS DVD torrent off their website, and start from there, with installing apache, and all the other items associated with a server environment to test/play around, or is there a difference and something I am missing with my plan to do this?
The end result will be having my desktop setup as a "server" I can ssh into and screw around with just to learn more about it.Sorry for the basic question. (i posted this here instead of the "newbie" section, since i figured it would get moved here)
I have a Ubuntu server (10.10) setup with apache and is being port NAT'ted via firewall from outside to the webserver.I am able to access the webserver from inside LAN but not from outside. NATs are working fine because I can see the traffic come through on tcpdump but the webserver will not respond to the request from outside ip address.Here are the tcpdumps.
10:11:58.939005 IP 12.xxx.xxx.6.10146 > 172.16.2.100.80: Flags [S], seq 3098920688, win 65535, options [mss 1380,nop,nop,nop,nop], length 0
10:12:01.898852 IP 12.xxx.xxx.6.10146 > 172.16.2.100.80: Flags [S], seq 3098920688,
[code]....