I am using KVM and created four guest Operating systems on it.The server host is Ubuntu 10.04.I am using 4 websites in a reverse proxy environment.One of our website is running on CentOS VM.Right now there is no traffic on the website static HTML pages.I do not have any clue as why it was taking longer time to be accessed.
View 2 RepliesWhen i open one of the web browsers i use and try to load a web site it's taking to long to respond and sometimes it doesnt load the website at all. I have tried with firefox,epiphany,opera with all the same results. I am sure that this is not a problem with my internet connection because i don't have these problems with windows.Also the network manager connection settings are correct
I also tried choosing the old kernel(2.6.32.24) to boot from but no success.The problem is the same as if i am using the 2.6.32.25 kernel. The strange thing is that i can download packages from synaptic with full speed. Last think.I have recently downloaded the recommended updates from the update manager but i don't remember what are the things that where updated.
I am using KVM and created four guest Operating systems on it. The server host is Ubuntu 10.04.I am using 4 websites in a reverse proxy environment. One of our website is running on CentOS VM. Right now there is no traffic on the website static HTML pages. I do not have any clue as why it was taking longer time to be accessed.
View 17 Replies View Relatedin ubuntu 10.04 After logging in t All I had was the wallpaper & my widgets for around a minute, and then the usual upper and lower panels appeared.. didnt had this problem in 9.10
View 4 Replies View RelatedI am running Centos 5.3. I ran no updates, performed no installs, nor changed any configuration immediately prior to this issue. My problem is this: when I run the command startx (default runlevel 3), it is a long time (5-10 minutes) before Gnome startx, and once it does start applications will not run. Also, when I try to use sudo (from any environment, even ssh), it is a long time (5-10) before the command is executed.
I cannot say for sure, but it seems like this is an intermittent problem. Sometimes X takes a long time to start, but once it starts it will launch programs. Sometimes X takes a long time to launch, but once it starts it will only launch certain programs. Though presently X always takes a long time to start, and I cannot successfully launch any programs.
A while back a had a similar problem to this (x taking long time to start, sudo taking long time to execute) and it ended up being a DNS problem. Unfortunately, I cannot remember exactly what it was and I stupidly did not document it. Maybe this is also DNS related, I don't know.
I don't know what log files to look at for problems with X, Gnome, and sudo taking a long time to start.
I am backing up data from a remote server onto a local ntfs partition. It seems that the rm -rf and cp -a commands are taking a long time to complete in what should be short, incremental backups.Has anyone had similar problems when backing up to an ntfs partitionHere is my rsnapshot.conf:
Code:
#################################################
# rsnapshot.conf - rsnapshot configuration file #
[code]....
while installation of debian 5 from small cd ... does configuring apt take a lot of time!!! installing debian for the first time.
View 1 Replies View RelatedI have just made a clean install of Ubuntu 9.10 and after installing all updates, GDM is taking a long time (about one minute) to come up after a clean boot, resulting in a regular console prompt.
If I issue "sudo service gdm start" it does come up promptly.
What can I do? Where can I see startup logs to try and identify any problems?
I compressed a directory containing many image files. The directory amounted to 5.3gig. Compressed with TAR using .tgz the compression took a couple minutes at most and compressed down to 4.3 gig. Compressed using .bz2 the compression took about 90 minutes and compressed down to 4.2 gig. Hardly worth the extra time. Do these numbers look normal to you?
View 1 Replies View RelatedI don't know if it is just me but it seems like Ubuntu takes a long time to start up programs. For example, it takes me 10 seconds to start up "Ubuntu software center". My computer is a relatively fast one. It has 4 gb of ram and an intel core duo processor. I didn't install that many programs. Does anyone know what might be the source of the problem and how to fix it?
View 6 Replies View RelatedQuote:
#!/bin/ksh
DBcounttry_finalnofunc()
{
[code]....
I purchased a special collection boxed Superman set for my 10 year old daughter in May for her birthday and recently some second hand Zumba DVD's. My daughter is quite hard on DVD's. So I have as asked her to wait whilst I have them copied.
I will be using the Zumba regularly and know they will suffer so want use copies and save the originals.
I have done some reading and I think I have everything installed correctly.
I tried K9copy, but it immediately closed. I then tried K3b and noticed I needed 99GB of space. (I wonder if that is why K9copy closed?) The only thing I have that big is my backup external drive.
So I connected it up. I only had about 44 GB of space on it. I ticked for half the tracks which needed less space. So now there was enough space. I then clicked on rip DVD. It has been doing it continuously for 2 nights and is up to 24%.
So at this rate it will take a week to copy half a DVD to my drive and then I have to burn it to a DVD. This can't be right, can it?
I am running OpenSuse 11.3
It takes an exceptionally long time for basic graphic actions to occur like switching tabs in Firefox, redrawing windows that have been (un)maximized/minimized, and switching between windows. My video card is not a bad one, a GeForce 9500 GT and Windows handles it just fine. I'm using the current NVIDIA drivers 265.35. It seems like if I can't get some better response time I'll be using Windows much more.
View 3 Replies View RelatedRunning first upgrade after installing 9.10.
Currently on item "Configuring linux-image-2.6.31-20-generic" and the progress bar/terminal readout has not changed for an hour or so I'd say.
Don't want to cause issues by killing it halfway through, especially as it presents an opportunity to learn something!
I've setup vsftpd correctly and it's running fine with local users (in the same LAN). However, when remote users wanna login to the server, it takes more than 1 minute to get in. Users do can login from remote. It just took too long. (It prompted for the username and password very fast.) Since the server is behind a router, I did configure the port forwarding for TCP 20-21. The centos version is 5.3. The vsftpd is v2.0.5.
View 6 Replies View Relatedi have installed ubuntu ultimate edition 10.04 in my toshiba c650 recently,however it is taking too long before it startup. 2 when i log off the cursor still remain untill all power have been discharged. what could be the problem
View 5 Replies View RelatedI have been using Karmic as a tool to extract important data from Windows Operating Systems where say viruses have necessitated a complete reinstall. I run the Karmic install disk and use the 'try before installing'option. It works well and I am able to 'rescue' anything I want by saving to a USB drive.Problem is that Karmic does take a relatively long time to load on a 'slow' PC.Does anyone have any suggestions on a 'slimmed down' Ubuntu that could be used in the same way which will load up quickly ?In most circumstances all I want to do is mount the C Drive of the stuffed PC and copy files to an external USB drive.
View 5 Replies View RelatedI'm running Ubuntu 9.10 and Windows XP on my system. After installing Ubuntu, it boots normally about once, and then the next time I try to boot, I have to wait a few minutes with it saying "GRUB Loading." I have read other threads about this that say that it is clearly a GRUB2 problem, and something about Windows overwriting something with the MBR; although I haven't booted into windows once in the process of installing Ubuntu (multiple times) or afterward. GRUB version 1.97~beta4.
View 10 Replies View RelatedI am using following software on my web server:
RedHat 2.6.18-92.1.10.el5
Apache/2.2.3
Coldfusion 8
My webserver accesses a backend mySQL server using CentOS5
The last week, I have been getting a "page Load Error" on my web server whilst others told me they are getting a "broken link" error when they try to access my web site. It has been working fine for the last 12 months until last week.
ADSL, modem and router okay according to service provider (verizon)
I can ping my IP address and my domain name.
# netstat -tap
shows http and https both processes running.
# service httpd restart
no issues
I shut down firewall and tried again, but got the same "page load error".
Im running drupal on my webserver and, this morning all of the sudden I went to edit a node and now I cant load the website in my browser at all. I can ping the machine and SSH into it fine, but it will not load the website in chrome or IE, I have no idea whats going on here.
Edit: I did a 'service httpd restart', it took 3mins to restart, is this normal? After I did that it loaded once, not even all of the page, now its doing the same thing again.
Edit2: Now it seems to be working fine again...
Now I use mutt to manage the mail list.
But when I start to mutt, it takes a long time (about 1~2 minutes) to
load all the mail list, about 20 thousands mail.
I don't know why it takes such a long time.
I'm hoping someone knows about this one... I'm running the latest CentOS 5.4 with kernel 2.6.18-164.15.1.el5 (x86_64).When I boot the machine, it gets to the udev starting bit, hangs for like 5 minutes, then prints a message "Failed, will continue in the background." Then it boots OK after that.I tried booting again with the kernel option (from grub) "udevdebug", and what I saw when it tried again was a million messages saying it was waiting for "/sbin/pam_console_apply" to return, but I guess it wasn't returning... ;) Again, after 5 minutes, it gave up and finished booting.Now, this host is an LDAP client.
I figured that may have something to do with it as it is likely that pam_console_apply tries to make an LDAP lookup, which is wrong, because networking hasn't even started yet. If I disable LDAP (by removing ldap lookups in nsswitch.conf), I get no pam_console_apply errors from udev and it boots quickly. But that's a bummer, I need LDAP on this box, and I don't want my boot time to be 7-8 minutes. ;)Presumably before, when LDAP was enabled and it waited 5 minutes and then notified me that it will "continue in the background", that it was eventually successful after networking started. LDAP otherwise works fine on this box, just like all the other servers we have.This is new behavior, I've not seen it with CentOS 5.3 and below. Has anyone seen this? Any hints on what I can do to avoid it? It seems like a pam bug or something, but I don't know for sure.
LDAP Server => CentOS 5.5 Configured according to this link [url]
LDAP Client => Fedora 14 Configured according to this link [url]
Now after I reboot the Fedora14 during startup, it takes very very long time to start up the mdmonitor service.
After that when I log on using a local account in the Fedora14 machine, it takes painfully long time to log on. And it does not identify the domain user.
I can able to log on to the ldap server through ssh from the Fedora machine.
I issued the command 'getent passwd' which does not fetch the domain users either. I am completely lost now.
I switched to Fedora from Ubuntu about a month ago, and I've been very happy so far. But today I started the upgrade to Fedora 15, and something isn't right. I used the preupgrade method, and the package download took a respectable 30-40 minutes, then I was prompted to reboot my machine. I did so, about 4 hours ago. It took about 2 hours to get to the point where it says it's installing the packages, and 2 hours to get to where it is as I write this, at 116 completed packages out of 1634.
I'm pretty sure this isn't normal for ANY distribution. The machine itself is about 6 months old, so I'm pretty sure it's not a hardware issue. I'm considering interrupting the upgrade and doing a clean install, but I was wondering, is there anything I can do before resorting to the clean install option?
I just want to find out if anybody else is having a similar issue before I start trying to disable services one by one. When I boot in to F15, everything runs fine up to were it starts loading the CUPS module then it hangs for about 2 to 3 minutes, the next thing to load is Samba shares. So it could be either of these or it could have nothing to do with them. Just to add that I made 100% sure that all my samba shares mount fine and are online and have no shares mounting in my fstab file.
View 2 Replies View RelatedI tried to update fedora 15 and it took too long , even the cleaing of packages took too long At the end of the update got the status cleaning up packages that took even longer than the whole update.
View 3 Replies View RelatedThe find command is taking too long on my machine to complete. When I use time command, I find that sys time and user time are too small as compared to real time. Is my find process not getting scheduled properly?
I interrupted the neverending find command and got the following statistics:
Real time : 5min
Sys time : 1.1 sec
User time : 3 sec
I was running
find / -name ls 2>/dev/null
I have about 200k data entries in xml file. I wrote php script (using php-xml) to read xml file and insert into mysql. At first it went really quickly inserting, then after a while after inserting 100k entries, it slowed right down, just like it would not even doing anything. I have CentOs with 512M on VirtualBox running as server.
View 3 Replies View RelatedWe have a server that needs to be hi availablility.
The problem is, sometimes our internet winks out for a few minutes.
We decided that we wanted to get two seperate lines to our server, and so they would be two different ip addresses.
What out there would allow us to serve apache on www.mywebsite.com on more than one ip, and, if we can, do load balancing?
I am following this howto to install Apache, MySQL, and PHP5:
[URL]
I have just installed Apache and I am pointing my browser to:
http://192.168.0.100
but I am getting the error message that the server is taking too long to respond.