I previously installed centos using DHCP. Now I purchased a domain name and want to set it up as a webserver. if I choose the static ip address based on the existing DNS server given to me by the domain company, it will ask for the subnet mask, default gateway and i do not have them.
View 6 Repliesi am planning to setup a Web server on AWS Cloud Platform.The requisites are
ubuntu karmic 9.10
Java - 1.6.0_20
Tomcat - 6.0.29
Apache - 2.2.14
Mysql - 5.1.41-3ubuntu12.6
Since i am not much familiar with Ubuntu,Shall i go for apt-get install or download source and compile each application.
I have setup Ubuntu servers as LAMP machines but that's pretty much it.
I need to work on an existing CentOS server that I will see for the first time tomorrow. I am told that, as of right now, it is "just serving the internet." The goal is to set it up to be a primary domain controller by which I mean:
1) A user should be able to login to the server from any of the workstations and then see their server stored documents
2) The clients will be a mixed bag of Linux, Windows and Mac machines
I could use a push in the right direction as to what I need to do to get this all setup. I know how to setup users and home folders (I use webmin typically and I understand that there is a version for CentOS) but clearly there is more that I need to do. I am really curious as to how I would map the necessary drives on the client machines upon login and have the users have automatic access to their data regardless of the client machine they log in to.
I bought an SSL certificate that I am using for my whole website and would like to use that for postfix as well. I created my own as a test and it worked fine, but I want to use the one I bought because that is trusted, more secure, and the user doesn't get an untrusted popup every time they check their mail through outlook.
The problem is that I don't have a defined "key". I have two files, they are two certificate files. One is the website certificate and the other is a bundle certificate. I tried setting bundle as the key and the actual website cert as the certificate but that did not work. Can I do this? Is their a different type of cert I need to buy for this? What do I need to make "smtpd_tls_key_file" and "smtpd_tls_cert_file"?
My two files are, "sf_bundle.crt", and "website.com.crt".
i have installed SUSE 11 recently and have set the domain name and netmask using YaST settings after installation.But, the domain name is empty after rebooting. I have verified this using domainname command from terminal. But, in Network settings it is there.I think the system is not picking up the domain name from YaST settings.
View 2 Replies View Relatedhow to create an entire server from scratch using a minimal install. I know Ubuntu Server 10.04.1 comes with packages that can be included during install but for the sake of learning I only installed SSH access.
I was able to get Apache2, MySQL, PHP5 installed and running fine. What I'm trying to do next is setup DNS so I can point fragdata.com to my Ubuntu server and have other people see my test site.
I have registered the nameserver ns1.fragdata.com with my IP and updated DNS in my registrar. I followed the tutorial but "dig fragdata.com" gives me the following:
Code:
root@linux-server:/home/syvil# dig fragdata.com
; <<>> DiG 9.7.0-P1 <<>> fragdata.com
;; global options: +cmd
;; Got answer:
[Code]....
I have setup a Linux Centos with apache server on it in a home network. Everything works fine. When I access the webserver I put in the address bar the IP address of the server which is 192.168.0.150 and when hit enter, it prompts the page where I have to put login information. The login information is set to: username: admin@localhost.local password: *************
It takes long time for authentication go through and load the page eventhough I am accessing the site in a same home local area network with fast ethernet connection. How can I change the localhost.local to something else like maybe [URL] instead and if I have to change settings in other files as well?
I am interested in setting up a webserver on a PC I have laying around...more for the experience and knowledge of learning it from scratch. I have used dedicated servers before with webhosting, but did not do the installations of apache and other items. The server we had purchased had CentOS installed.
My question is, can I use this desktop I have to simply install the CentOS DVD torrent off their website, and start from there, with installing apache, and all the other items associated with a server environment to test/play around, or is there a difference and something I am missing with my plan to do this?
The end result will be having my desktop setup as a "server" I can ssh into and screw around with just to learn more about it.Sorry for the basic question. (i posted this here instead of the "newbie" section, since i figured it would get moved here)
I am having trouble setting up name based virtual hosting on my Linux Webserver. I have two websites: I need the lowcostchemicals site to use a SSL certificate which I have already created and added to a folder [URL] The lowcostchemicals site needs to go into the folder:[URL] The [URL] site needs to go into the folder [URL] I have tried to set up the virtual hosts but all of the sites go to the root folder: var/www/html/
View 1 Replies View RelatedSet up my own web server hosted at home that I can use a genealogy program such as GRAMPS or PHPGedView with so that family members and I can store, view and upload information online viewable only to other family members.I have a old Dell server from work to use as a server (I know specs are helpful but don't have them at the moment.)I know that there are web hosting sites that this can be accomplished with easier and cheap but I mostly want to use this as an opportunity to learn.I am extremely new to Linux but the love the power it offers as well as it's philosophy.So far I've installed Ubuntu 10.04 Server on the machine.
I installed Apache, MySql, PHP and various other things with it.I got all the way through but have some errors with ISPconfig set up and some when I reboot.My main question at this point is, is this the best approach for what I want to do? And then once it's set up where do I go to learn how to use my system.
I am setting up a web server and SElinux keeps stopping httpd/appache and making it fail. Everything works fine when SElinux is set to permisive, so I know it is SElinux causing the problem. I have all the apache/httpd items allowed in the SElinux bool and even added the line the troubleshooter told me to add but the problem still persists. Here is what SElinux puts out:
[Code].....
several times and it does nothing. I have all the permissions set to Apache as owner and group and allow execution on all the files.
Ok let's say I have Apache Webservers on 2 different machines within my network, I have http://outterABC.com setup at dyndns.org to point to my modem at home, and my router forwards Port 80 to the ServerA Machine (i.e. 192.168.0.3). I can access my webpage I setup for the Server A Machine.
But what I want to try and do is somehow access my ServerB machine's website that is on my same network. I tried something like this http://ServerB.outterABC.com and the apache page came up with something like the page wasn't available. I want to access the content of the ServerB website, but because I have only one router, i can only forward Port 80 site traffic to my ServerA machine's website. I'm sure it's a different syntax I should use but i'm just not sure what I should enter to bring up the apache root web page for the Server B website via http://outterABC.com
I tried setting up DNS A records on ServerA, but I don't think it will work with what i'm trying to do above.
I'm running CentOS 5.4 with sendmail. My computer hostname is bob.domain.com. Whenever I would nc -v 127.0.0.1 25 into sendmail I would get bob.domain.com on the banner. Whenever I send out email the emails would be user@bob.domain.com. I wanted the email to show up as user@domain.com. So in the etc/mail/sendmail.cf file I changed the line
Code:
Dj$w.hostname.com
to this
Code:
Djhostname.com
Now when I enter sendmail I see domain.com in the banner so I know the change took place. However, when I send email using
Code:
mail -s "test" xxx@xxx.com
then email still goes out as user@bob.domain.com. What other changes do I need to make?
I have a question for installing centos with domain and ip address.I want to install centos 5.3 at my server which is installed redhat 9.My question is how to sonfigure domain and ip.
View 4 Replies View RelatedI already setup my samba, openLDAP as well as smb-tools but when I try to registered my winXP client into Linux Domain,there was an error "a device attached to the system is not functioning" but browsing of user folder is possible, by typing in run command \server1 then provide a username and password.I can also transfer some documents on that folder, only registering from linux domain is my problem...
View 1 Replies View RelatedI am looking for advice on a what I am sure is a very basic procedure but I have never had to set this up before and am not sure where to start.
I am running 2 CentOS5.3 boxes. I have one webserver connected to the internet and behind a firewall. I would like to set up the 2nd server (database) behind the webserver and completely inaccessible from the internet. Ideally so it can only be accessed by first ssh'ing onto the webserver and then ssh'ing from there onto the database. The webserver connecting locally to database.
From what I have seen it looks like I need to set this up using NAT but I have never done this and do not know what is involved. Can someone point me in the right direction and optimally outline the steps I need to take to hook this up? Do I need to worry about any specific hardware configuration as well?
I have a red hat system that I currently have two websites hosted on. Im trying to set up a third domainname but every time I touch the files (httpd.conf, hosts, ddclient.conf, VirtualHosts,etc) it resolves to the primary domain name. The third domain keeps pulling up my first domain instead of resolving to its domain name. Any Ideas? I go through DynDns with custom domains. The first two have been working for years, but whenever I try to set up the third one exactly like the other two using the thirds info, it will not resolve to that third domain?????
View 1 Replies View RelatedI have a dedicated server running Centos 5.2. I have a Wordpress MU site that's setup over apache 2, mysql 5, php5, and I use phpmyadmin as well. I'm able to read the database as my website appears perfectly fine, however, I can not write to it. What exactly do I need to install on my Centos sever to allow my site to interface with the database? I've used shared servers and VPS's with no problems but this just won't work. The support team seems clueless and I'm ready to ask them to reinstall my entire OS and everything else again.
View 2 Replies View RelatedIm running drupal on my webserver and, this morning all of the sudden I went to edit a node and now I cant load the website in my browser at all. I can ping the machine and SSH into it fine, but it will not load the website in chrome or IE, I have no idea whats going on here.
Edit: I did a 'service httpd restart', it took 3mins to restart, is this normal? After I did that it loaded once, not even all of the page, now its doing the same thing again.
Edit2: Now it seems to be working fine again...
I use VPS because when i was on share hosting. My website was hacked by hacker. Now i'm using VPS. I want to ask how to update webserver application such as Mysql, phpMyAdmin, lighttpd I use centOS 5 i386 and i use Kloxo Panel. I was already installed Mybb.
View 1 Replies View RelatedI have a server running ubuntu 8.04 with apache2. What I'd like to know is how to go about setting up a domain name? I've looked at a heap of hosting sites, but they son't seem to allow you to specify your own IP address that you already have. Also, I'm not sure about what, if any kind of DNS software I would then have to run on my server. At this stage I'm only doing preliminary research about it I guess.
View 2 Replies View RelatedI have created a mail server using citadel that seems to be working nicely. My only problem is the only way to access the server is to go to 71.114.220.3:2000 (it's running on port 2000). I would like to be able to access the server by going to mail.annarrankings.comI'm using godaddy for my dns and set an A record as host=mail, points to =@Then set the mx server to priority=10, host=mail.annarrankings.com, points to = @
View 1 Replies View Relatedi have a question, it ought to be a simple task for most but im as noob as they get. In ubuntu 11.04 desktop, how do i change the hostname as well as setting the new domain name?. Temporarily its easy with hostname and domainname in terminal, but i want it to become persistant. Lets say i want the machine name to become computer01 and domain to become homenet.lan. Then i would change the /etc/hostname to contain computer01 only. But what i cant figure is how the new /etc/hosts is supposed to look, the old one is:
127.0.0.1 localhost
127.0.1.1 current_computer_name
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
But how is the new /etc/hosts supposed to look if hostname is to be computer01 and domainname homenet.lan?,
I am trying to configure a BIND DNS server to handle three websites on my home network, (my site, my sons site and our test site). Since my ISP uses dynamic DNS, we are using DNS2GO to redirect our traffic, 9EACH SERVER HAS IT'S OWN VERSION OF dns2go running).My problem is that I can't figure out how to configure BIND since I don't have a static IP to enter into the named.conf or reslov.conf configuration files.
View 7 Replies View RelatedIm trying to make a webserver at home. I have a static IP Address of my ISP (o2) I have built a server ( 2.8 p4HT, 2GB Ram, 500GB HDD) Just to test... But, i dont know what to do in the IP Address settings for the IPv4 ( I think thats what it is) Do i put my static IP address in my ISP gave me, or the local IP of the server ( Wich is 192.168.1.72) Im realy confused. Ive tried everything i can think of, Reinstalled the os about 40 times up to now...
View 1 Replies View RelatedI have 4 centos5 apache webservers all on the same network, recently, 2 of the webservers have stopped being able to ping or browse one particular website where feeds are obtained from this site. I have checked and firewall and selinux settings are disabled. The two webservers are able to ping and browse other sites. Dns settings are the same for all 4 servers. traceroute for working and not working webservers are the same.
View 1 Replies View RelatedI am using centos 5.3 , and also using webserver in local network
Here is all configuration
1, server
eth0 , 222.80.1.90 this is live ip
eth1 10.0.0.1
2, webserver
eth0 10.0.0.2
I want set iptables on server 1 , to acces webserver from other city ,
How to configure iptables
I want to give Administrator privileges to Root user in Linux Domain Controller
View 12 Replies View RelatedIm an IT manager for a small company with a small ammount of users. We already use linux for our data server and I would like to implement a domain controller. All of our user machines are WIndows XP pro.
Ive been reading up on using OpenLDAP as an alternative to active directory.
What I want is just a simple active directory like server, with a GUI if possible.
What do I need to look at and how would I go about setting this up? Im fairly proficient with Ubuntu already, I just need to be pointed in the right direction.
Is it even possible to have my windows users be able to log in to their machines using an ubuntu domain controller?
I want to host 5 websites on my new virtual server so I have created 2 nameservers that point to my virtual server's IP addresses as a glue record. What confuses me is when I create a new domain on my server it gives the new domain it's own nameservers (ns1.thenewdomain.co.uk etc) do I need to change these records so they use the nameservers I created earlier? If I do? Which particular records should I change? I'm running a Unix virtual server with a Plesk control panel.
View 2 Replies View Related