have search the web for answer and there are some suggestion. tried those suggestion but was not successful.appreciate if any one can help to resolve this? I'm running fedora 11 and using the NXserver for remote access
View 7 Replies
So I have looked everywhere, I see the ssh script in /etc/init.d everything seems to check out with chkconfig (shows 3 and 5). But for some reason my SSHD server doesn't start on boot till I run either rcsshd start or /etc/init.d/ssh start.
View 7 Replies View RelatedI have Windows 7 and Fedora 14 both on my laptop in dual boot configuration. When my computer starts up it shows a screen that says press any button to select another operating system to start, then I can make Windows 7 start. But after 2 seconds, if I DON'T press any button then Fedora starts automatically. How can I change this so Windows starts automatically when I don't press any button?
View 4 Replies View RelatedWhen I go to 'Places' on my panel, my windows drives are listed. I can click on one, it then asks me for password, then it puts a hard drive icon on my desktop. This is excellent.They are listed as '200 GB Filesystem' etc.My only problem, is how to make these icons stay after I shut down. I don't want to do this every time I boot up.
View 4 Replies View RelatedMy son dropped my laptop and broke the screen so I decided to use it as a project.
1 I managed to install kubuntu on it unfortunately it was the 64bit version not the 34bit one. The problem I'm having is that the external monitor only works after kubuntu boots up so I can not view the set-up boot options. What I want to do is put win 7 on it as I have a mate that needs a computer and he is pretty computer illiterate.
2:It will boot into G-parted and I have made a ntfs partition for the win 7 OS to go into. I have another duel boot desktop so followed what I did with that.The problem is that as I cannot see the initial start up screen and can get it to boot from the win7 boot disc that I have(this is a working cd I have used before) Is there a way I can get Kubuntu to automatically go into boot from cd on start up etc?
I have a Centos 5.4 server, I would like to know how to start NFS automtically when the server boots up so that I won't have to manually start the service after the server boots up. where and how do I accomplish this?
View 3 Replies View RelatedI am using SUSE 11.2. And I am really baffled with a strange NFS problem.I have set up the fstab on the client and exports on the server correctly, because if I manually run # /etc/init.d/nfs startStarting NFS client services: sm-notify doneI can see and use the NFS partition perfectly, there is no problem at all.But nfs cannot successfully start at boot. In yast, I have enabled nfs in "System Services (Runlevel)" at runlevel 3 and 5. So it should run automatically, but I always get the following error message:
/var/log/message:
Apr 10 20:07:56 hubble kernel: [ 33.654768] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[code]....
I have a 32-bit openSUSE 11.4 (2.6.37.6-0.5-default) installation with a
WNBA3100v2 wireless USB card and a 100Base-TX NIC running on a Dell 4700c:
Code:
BCM4401-B0 100Base-TX (Not connected)
MAC : YY:YY:YY:YY:YY:YY
BusID : 0000:04:07.0
Device Name: eth0
[Code].....
I'm wondering how I start it automatically when I boot up the ubuntu 10.04? especially, when I created the user "postgres", I set a password to it. every time I issued "su - postgres" command, I need to give it a password.
View 2 Replies View RelatedI have configured heartbeat+DRBD on a SLES10 SP3 cluster and that's working fine except when both nodes are down and I turn on only one node. When this happens, the heartbeat don't starts automatically (the service status says it's unused, so the services, IP address and partition don't start automatically too).
I can turn on the heartbeat manually (service heartbeat start) and get the services, ip address and partition initialized too, but I'd like to make it starts automatically because it's possible to have one node broken and the person that will turn on the other node can forget to manually starts the service.
-When the heartbeat is unused on the first node and I turn on the second node, the heartbeat on the first node starts automatically and everything is fine.
-The command "chkconfig heartbeat on" was executed.
I installed dansguardian & squid on 11.2 and things seem to run fine. Squid auto starts but dansguardian does not. I have checked Yast2's runlevel services option and dansguardian is enabled to 'Yes'. But when i check with 'service dansguardian status' it reports 'unused'.If i start dansguardian by hand, things work perfectly fine.I am in a desperate situation since there are 4 other computers which are dependent on this setup to work correctly
View 2 Replies View Relatedi use ubuntu 10.10 installed in wubi on my girlfriend's machine.in order to connect to the internet i had to install a dialer script and then i need to type in terminal: sudo cable-start and then password BUT i wish this to happen automatically when booting the machine.i am sure that it is possible, but have no clue how to do it.
View 3 Replies View RelatedI just did a distribution upgrade on my laptop from 9.1 to 10.04, and it went fine for the most part except this issue. After it boots up, I don't see any window titles/scrollbars/borders and on clicking the icon for "Show desktop" on the bottom left, I see the following error message:
"Your window manager does not support the show desktop button, or you are not running a window manager."
After googling a bit, I realized that gnome-wm is not starting automatically and so I have to manually start each time to see the windows working properly. Can somebody tell me if there is a way to make sure that gnome-wm starts automatically? I know I can put it in my .bashrc but I want to do it the correct way if possible. If not, I will have to go with that workaround.
Updated two SSH packages today and now SSHd wont start. Worked fine an hour ago, and I'm still logged onto the server via pre-existing SSH sessions, but now I obviously cannot start new ones.
Code:
paine@pandora:~$ sudo /etc/init.d/ssh start
* /dev/null is not a character device!
paine@pandora:~$
Can you guys help me diagnose what the problem is? SSH doesnt' start automatically.
View 1 Replies View RelatedI just did a distribution upgrade on my laptop from 9.1 to 10.04, and it went fine for the most part except this issue. After it boots up, I don't see any window titles/scrollbars/borders and on clicking the icon for "Show desktop" on the bottom left I see the following error message: "Your window manager does not support the show desktop button, or you are not running a window manager."
After googling a bit, I realized that gnome-wm is not starting automatically and so I have to manually start each time to see the windows working properly. Can somebody tell me if there is a way to make sure that gnome-wm starts automatically? I know I can put it in my .bashrc but I want to do it the correct way if possible. If not, I will have to go with that workaround
what to do for lock automatically slackware 13 if not used for n minutes ?What can i do to start automatically the ktorrent (a bittorrent program for linux) on system starts on slackware 13 ?
View 2 Replies View RelatedIn centos 5.3 i am unable to start sshd service shows error starting sshd :/etc/init.d/sshd:line102"7182 illegal instruction $sshd$ option
Same error while starting the httpd service.
I just installed a fresh copy of Fedora 14. When I am browsing the internet it seems like it takes forever to look up the host. In firefox I went and disabled the IPv6 option and it seemed to fix the issue, but Chrome is still having the problem. Is there a way to change this setting in Chrome?
Also I have installed conky but I can't figure out how to get it to start automatically when I log on? Can someone point me to the file I need to edit to make it work?
After an upgrade to 2.6.27.25-78.2.56.fc9.i686 in March, my Atheros wireless stopped working. (It had previously run without a hitch for 9 months). Anyway, I finally got around to working on it today and using the "WiFi misery" thread managed to consistently get it to start manually via these steps:ifconfig wlan0 up
iwconfig wlan0 essid netname key xxxxxxxxxxxxx
click on "activate" in network device control (gives error msg, but works)
During boot-up, I get "Invalid argument" errors for "SET MODE", "SET BIT RATE", and "SET ENCODE".Currently NetworkManager service is disabled, but when enabled doesn't seem to change any of the above.I'd like to get back to automatically coming up wireless, if possible.
I have a problem with running Apache web server. I think my problem is either I can not get httpd to load automatically or it's being blocked from external unless I'm logged in, don't know which. Or, I'm completely off base. Either way, being logged in solves the problem. Now I just need to fix it. This is a brand new server running latest apache and fedora 10 (all fully patched). Loaded from source to all default (non RPM directories - apache is /usr/local/apache2/... )
I modified the existing /etc/init.d/httpd script and had it point to the /usr/local/apache2 areas.I even did a chkconfig --add httpd and show it is on for run levels 2345.The problem is that when I reboot the server httpd does not load because I can not access the website.However, the minute I login to the server as a user (non-root) it automatically loads httpd and the website works.Then, when I logout, everything is inaccessible again. I even tried to put the commands in the /etc/rc.local script (or wherever it is).Same thing happens.I know this is a simple fix. Just don't know what it is. Is it related to SElinux? However, wouldn't SElinux create access problems regardless of being logged in or not? Once I'm logged in, everything automatically fixes itself (either it's a service load or a rights filter fix).
Remember, everything works perfectly as long as I'm logged in to the server (even as a non-root user). Just the act of logging in makes the web server accessible from to the rest of the world. However, when I logout, the web server is inaccessible.
now my system does not connects automatically when fedora start's to eth0 i have to connect it manually by pull down menu in the beginning hostnname was dbe272b22.dslam-172-17-161-245-0532-474.dsl.cantv.net i do not remember if the last part ".cantv.net" was there.... i changed hostname "dbe272b22.dslam-172-17-161-245-0532-474.dsl" maybe ending with ".cantv.net" with system-config-network for hostname "edicta" i modified /etc/hosts by hand twice, now do not remember what i did exacly but here you can see /etc/hosts
[Code]....
Im trying to run synergy on startup. This works fine on the client, but it wont start automatically on the server. I put this line in an entry in startup applications:
[code]...
but still no dice.
I use Opensuse 11 with fvwm. How can I get conky start automatically when I start fvwm?
I setup the conky under fvwm session for my Opensuse 11 but it won't start automatically. I am wondering how to write some kind of scripts to force it to start automatically and with a delay about 10 seconds after fvwm starts.
Running 11.4 x64, I've tried everything I can think of (which is not saying a lot) but I can't get sshd started on boot. Running /etc/init.d/sshd starts the service manually with no problem but I really need it started on boot.
I can't find anything different when comparing this instance with other similar instances where sshd does start but this instance is an update from 11.3 where sshd was not enabled and the others are all clean installs where sshd was enabled during installation, if that makes any difference.
I am having trouble getting grub to automatically boot into ubuntu server. When I turn on my server the grub menu shows up and shows me the choices. They all work fine except that grub wont automatically select one. This wouldn't be too much of a problem but this is a headless server and I can't boot into ubuntu without a keyboard. I tried looking through the grub 2 documentation but nothing seemed to work when I edited the conf file.
View 1 Replies View RelatedI have a big LCD screen.I make it 90 degrees retated to play games .But I want to know :if I can get rotation in boot up? I'm using Fedora 12 in KDE. My screen display driver is Intel . I think can write something into /etc/X11/xorg.conf to make it,or write into KDE's init script /usr/bin/startkde ( if there is a command like"rotate 90",then I can write it here).
View 3 Replies View RelatedMy pc has two operating system, XP and Fedora 14 I was setted PC to Auto turn on with BIOS, after turning on, system was booting in fedora automatically after 10 seconds.
But, After i upgrade to fedora 15 via terminal(Preupgrade), that auto booting has disabled. I should Press Enter to boot into Fedora 15. It should be have auto booting into feodra 15 like when i was fedora 14.
One question: should F13 mount all attached USB devices after boot automatically? I guess it should. However, what I've experienced is that after boot and login, my USB modem + flash memory is not mounted. I need to manually unplug it and plug it again, and then it's mounted
View 1 Replies View RelatedIs it possible to save a workspace so that it automatically opens every time you boot Fedora?
I like having Pidgin, Evolution, VLC, and Transmission open in the 4th workspace all the time. Sorry if this has been asked, I searched and found nothing, and this is the first Linux OS I've ever used!
