So I have looked everywhere, I see the ssh script in /etc/init.d everything seems to check out with chkconfig (shows 3 and 5). But for some reason my SSHD server doesn't start on boot till I run either rcsshd start or /etc/init.d/ssh start.
View 7 Replies
have search the web for answer and there are some suggestion. tried those suggestion but was not successful.appreciate if any one can help to resolve this? I'm running fedora 11 and using the NXserver for remote access
View 7 Replies View RelatedRunning 11.4 x64, I've tried everything I can think of (which is not saying a lot) but I can't get sshd started on boot. Running /etc/init.d/sshd starts the service manually with no problem but I really need it started on boot.
I can't find anything different when comparing this instance with other similar instances where sshd does start but this instance is an update from 11.3 where sshd was not enabled and the others are all clean installs where sshd was enabled during installation, if that makes any difference.
I'm testing upgrading from 11.1 to 11.3 and running into a major roadblock. When I try to ssh to the server after upgrading, I am unable to use password or pubkey auth to connect via ssh with my ldap user due to sshd segfault. I can however connect via pubkey to a local account on the system. Both auth methods work (for local users) when I disable UsePAM in sshd_config, but auth via ldap is required. My configuration works fine on fully patched installs of both 11.1 and 11.3, but not a fully patched 11.1 upgraded to 11.3. I've been at this for a while now trying various things but don't seem to be making much progress..
/var/log/messages:
Code:
Oct 6 20:33:15 susetest kernel: [ 1829.251921] sshd[3602]: segfault at 7f4bb0521240 ip 00007f4bb0509354 sp 00007fffdf212850 error 7 in libcrypto.so.1.0.0[7f4bb0449000+188000]/usr/sbin/sshd -ddd:
Code:
debug2: load_server_config: filename /etc/ssh/sshd_config
debug2: load_server_config: done config len = 431
debug2: parse_server_config: config /etc/ssh/sshd_config len 431
[code]....
I have installed "open-SUSE 11.4" on a "500GB Free Agent External Hard Drive". I didn't have any problem in booting since last week that I booted it from my laptop. Also I did it before several times from then when I try to boot it e.g. from an "Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz" PC the time between loading INITRD and starting boot sequence messages lasts nearly 30 minutes!(i didn't actually measure it but it take a long time in the same order). after starting boot sequence which is showed on monitor everything looks normal. e.g copy of files would be done by speeds between 2MB/s to 30 MB/s depending on the targets.I used to use the external hard derive to boot from different laptops and PC's from start but I didn't have such a problem anytime.
View 1 Replies View RelatedI set up opensuse 11.4. I updated nvidia 6600 drivers from vendor. Everything is good until automatic kernel update. When I start the system, opensuse is not open with this lines.
/etc/rc.status: line 1: /bin/ash : no such file or directory
bash: ./etc/sysconfig/chron : cannot execute binary file
X_MOUSE_CURSOR : Undefined variable
[code]....
I have an 1TB hard drive, half of it for Windows XP SP3, another half for OpenSUSE 11.4. After installing OpenSUSE, it didn't take me much time to notice that there was something wrong with KDE: sometimes it loaded quite fast, as expected, but most of the time I'd have to wait around 1 minute in that loading screen. Then I updated the kernel, as well as KDE itself, but that didn't solve the problem.
After that I tried to start the system using Enlightnment, and it was lightning fast compared to KDE, however, I didn't quite like its interface, and for some reason GNOME refused to start. All that was too frustrating to me, so I gave up and have been using Windows for the last few weeks. Got sick of it now and here I am on OpenSUSE again. Oh, it feels sooo much better! BUT, I'm still with the same problem.
My specs are as follow:
Motherboard: Gigabyte MA78GM-S2H (with updated BIOS, version F11)
Processor: AMD Phenom X3 8450
Memory: 2GB
Videocard: Nvidia Geforce 8500GT (using NVIDIA proprietary drivers)
OpenSUSE 11.4
KDE 4.6.0
Did I forget anything important?
Ps.: I didn't have these problems with Mandriva 2010.2, which, if I'm correct, used the same KDE version.
I wonder how could I start my ruby on rails mongrel_cluster at the start of my openSUSE 11.0 Server and I don't have a GUI. So the shell solution would be good.
View 1 Replies View RelatedI need to start VirtualBox on my server at boot time as "virtual" user, not root.
* What is the command line to do so? Virtual box command is "VBoxManage startvm xxx" but for "virtual" user?
* I think of setting this line in /etc/init.d/boot.local, but I wonder if this is not too early in the boot process?
of course I need all this to be done on non-interactive way, automatically (from the command line, I do it easily), including passwds
I have just done a fresh network install on SUSE on a new HP Proliant ML115 server. The install seemed to go OK, but on rebooting after the install I get a shell logon/prompt -- no GUI. Have tried reinstalling with the same result. If I try to run startkde I get a message that says "$DISPLAY is not set or cannot connect to the X server."
How do I resolve this?
i am getting this complaint when i try to automate the loading of a script taken from an ubuntu person:
/etc/init.d/automount: line 23: /lib/init/vars.sh: No such file or directory. I can't seem to find the equivalent in opensuse
I am using SUSE 11.2. And I am really baffled with a strange NFS problem.I have set up the fstab on the client and exports on the server correctly, because if I manually run # /etc/init.d/nfs startStarting NFS client services: sm-notify doneI can see and use the NFS partition perfectly, there is no problem at all.But nfs cannot successfully start at boot. In yast, I have enabled nfs in "System Services (Runlevel)" at runlevel 3 and 5. So it should run automatically, but I always get the following error message:
/var/log/message:
Apr 10 20:07:56 hubble kernel: [ 33.654768] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[code]....
I have just installed OPENSUSE 11.3 from a CD to a computer running WIN XP. The installation completed and I got to a desktop. I then shut down. When I restarted the computer with the installation CD removed from the drive, I got the message "missing operating system". I ran the installation again, and have left it running. As near as I can tell, the WIN Partition is still intact, but I'm afraid to shut it down for fear I once again will not be able to access either system.
View 4 Replies View RelatedI am completely fed up trying to do it. I had no problems with 11.0. It refuses to start up during boot like tor. I added tor to the kde start menu and it works just fine after boot. Privoxy refuses to start up during boot. I have to go into SU mode in terminal, then it works. I need to be able to start Privoxy the same way. I tried everything from chown / chmod commands, and it made no difference. I have it set for 777, and my name along with root. I also added the group privoxy to my user ID. I need the computer to disregard that it is a root program.
View 2 Replies View RelatedMy laptop is a Core 2 Centrino and i installed OpenSUSE 11.3 i586 on it recently. I tried to install the graphic card's driver using this instruction:ATI Installer HOWTO for openSUSE usersafter installation was done, i restarted the system but during the boot, where the openSUSE appears, the screen went black and nothing happened afterward untill i turned of the system manually.i tried again and same result, so i logged in with failsafe and un-installed those packages, now the system boots successfully, but it boots to the terminal instead of the desktop. i might have removed the X server package or something important.now that i have access to terminal and i can log in, i thought i can do something with it and solve it this way rather than re-installing the whole OS.he graphic card is :ATI Mobility Radeon HD 4570, if anyone knows how to the driver for this card, please let me know how to.
View 9 Replies View RelatedMy laptop is a Core 2 Centrino and i installed OpenSUSE 11.3 i586 on it recently. I tried to install the graphic card's driver using this instruction: ATI Installer HOWTO for openSUSE users after installation was done, i restarted the system but during the boot, where the openSUSE appears, the screen went black and nothing happened afterward untill i turned of the system manually. i tried again and same result, so i logged in with failsafe and un-installed those packages, now the system boots successfully, but it boots to the terminal instead of the desktop. i might have removed the X server package or something important. now that i have access to terminal and i can log in, i thought i can do something with it and solve it this way rather than re-installing the whole OS.the graphic card is :
ATI Mobility Radeon HD 4570, if anyone knows how to the driver for this card, please let me know how to.
I installed dansguardian & squid on 11.2 and things seem to run fine. Squid auto starts but dansguardian does not. I have checked Yast2's runlevel services option and dansguardian is enabled to 'Yes'. But when i check with 'service dansguardian status' it reports 'unused'.If i start dansguardian by hand, things work perfectly fine.I am in a desperate situation since there are 4 other computers which are dependent on this setup to work correctly
View 2 Replies View Relatedi have a script in /home/rpcaldeira/server.sh to start my source dedicated server. But i would like to start this on boot time. get this to start on boot time? I'm running openSuse 11.2 in Text Mode.
View 2 Replies View RelatedMy PC will not boot.I have tried to repair on the start up screen and by YaST with on success. sometimes it says device.map is wrong.
View 1 Replies View RelatedUpdated two SSH packages today and now SSHd wont start. Worked fine an hour ago, and I'm still logged onto the server via pre-existing SSH sessions, but now I obviously cannot start new ones.
Code:
paine@pandora:~$ sudo /etc/init.d/ssh start
* /dev/null is not a character device!
paine@pandora:~$
In centos 5.3 i am unable to start sshd service shows error starting sshd :/etc/init.d/sshd:line102"7182 illegal instruction $sshd$ option
Same error while starting the httpd service.
Does it make sense to run sshd confined/protected by apparmor? I get tons of attack/hack attempts on my ssh port daily, I created a white list on my firewall to specify the IP addresses that can ssh into my network. I was also thinking of activating the sshd profile in apparmor for some added protection?
View 5 Replies View RelatedI have an openSUSE 11.1 and I noticed that after installing a couple of things on it the sshd is not starting anymore on reboot. how can I debug this problem. Is there a log file so that I can see what was the problem? If I want to use ssh I have to start it from yast every time the computer restarts.
View 7 Replies View RelatedI know there's a bunch of ways to start a program on boot, but I'm wondering if there's pluses/minuses to the ways and what they are.My req's:1. I want it to be started as the user I log in as (NOT root)
View 4 Replies View RelatedI do this every time.
Code:
ifup dsl0
How can i set this to start at boot time?
i have compiled/installed Apache from source code ...however i don�t now how to start it at system start up as a daemon to run at level 3the server is usually started by the apachectl scriptwhich understand start stop restarti don't want to use suse distribution of Apachecan i just copy apachectl to /etc/init.d and make a link to it at /etc/init.d/rc3.d
View 4 Replies View RelatedI made a brief foray into IceWM g which I used tradition ifup" instead of KNetworkManager. I switched back to KDE and even though I have re-enabled "user controlled with network manager" KNetworkManager still doesn't run at KDE login. The connection's fine and I can start it up myself and it works.What is the best way to set it back to run at login so I'm automatically connected to the network?
View 9 Replies View RelatedMy eth0 is not up everytime at boot up. I will need to <service network restart> to get it up.
I have used yast's /etc/sysconfig editor to set /etc/sysconfig/network/config -> MANDATORY_DEVICES to eth0
And I have also added <alias eth0 e1000e> to /etc/modprobe.conf.local
And also set eth0 device to activate device at boot time using Network Card Setup.
But eth0 is still not starting up at boot time. What should I do to get it up at boot time?
I'm using openSUSE 10.3. And no, I'm am unable to move to 11.2
I have just visited this page here, Updating openSUSE - openSUSE I have been trying to update my OpenSuSE system for a week now and I have absolutely no idea what causes this problem. The update would start but would stop right in the middle and refuse to install some pulseaudio(...) package... It would indicate that network is down while I am sure it is up.
I am behind a proxy and I have again and again made sure that the proxy settings are correct and alright. Since it downloads some of the packages in the start I believe my connection and settings are OK. Maybe the SuSE server is down, but not for a whole week, I don't think so. I would also like to mention that I have only tried updating through YaST GUI and I am, as of yet, unaware of any console or command-line methods of updating.
I really would like to update my system because I happen to be paranoid in matters of computer security. (Just kidding) But since I cannot install any updates it should mean I might have problem installing new software. So my digital life is literally crippled because of this problem.
I looked into the handbook,googled for it,but found no working solution to this "problem". Everytime I use Opensuse I must su and then type dhclient,how can I make sure my connection will be up as soon as I log in?
View 7 Replies View Related
