OpenSUSE Network :: Sshd Not Starting On Boot?
May 21, 2011
Running 11.4 x64, I've tried everything I can think of (which is not saying a lot) but I can't get sshd started on boot. Running /etc/init.d/sshd starts the service manually with no problem but I really need it started on boot.
I can't find anything different when comparing this instance with other similar instances where sshd does start but this instance is an update from 11.3 where sshd was not enabled and the others are all clean installs where sshd was enabled during installation, if that makes any difference.
View 9 Replies
ADVERTISEMENT
Oct 6, 2010
I have an openSUSE 11.1 and I noticed that after installing a couple of things on it the sshd is not starting anymore on reboot. how can I debug this problem. Is there a log file so that I can see what was the problem? If I want to use ssh I have to start it from yast every time the computer restarts.
View 7 Replies
View Related
Mar 30, 2011
So I have looked everywhere, I see the ssh script in /etc/init.d everything seems to check out with chkconfig (shows 3 and 5). But for some reason my SSHD server doesn't start on boot till I run either rcsshd start or /etc/init.d/ssh start.
View 7 Replies
View Related
Dec 10, 2010
I'm running Ubuntu 10.10. I recently installed the open ssh server so that can sftp stuff. However, I do not want the server to always be on, only when I manually start So, I did an 'update-rc.d -f ssh remove'and now I don't see any startup scripts in the rcx.d directories any more.However, when I do a 'ps ax', there is always a '/usr/sbin/sshd' process running. I try to kill it but it keeps restarting under a different process ID.How do I disable sshd?
View 3 Replies
View Related
Sep 14, 2009
Recently after upgrading my kernel (via /repositories/Base:/Kernel/standard) I have had issues with the network not starting properly on bootup. The kernel is 100% SUSE-patched and behaves perfectly outside of that one issue. To get the network to "start" (DHCP issued, eth0 brought up) I have to 'rcnetwork start' in a shell. I've checked to make sure my config is right in both ifcfg-eth0 and 'config' for /etc/sysconfig/network, but nothing affects the outcome.
How do I get the boot scripts to bring up eth0 and issue a DHCP on startup?
Here's the output of 'rcnetwork start -o debug fake':
Code:
View 6 Replies
View Related
Jul 10, 2011
I would like to stop network manager from starting up on boot. I have tried moving
Code:
/etc/init.d/network-manager stop
to rc.local and it did nothing but boot me into the CLI
I have also tried to put
Code:
sudo service network-manager stop and that did nothing also.
After I get network manager to stop on boot up. How do I make it so it will not auto connect to networks? My computer keeps on joining a different network on boot up. And I don't like this as some times I go to my banks website and I am on there network with out realizing it (because of the auto connect) Is there a way to stop this also?
View 6 Replies
View Related
Jan 18, 2010
I just noticed the following error after booting my system.
Code:
I cannot find any reference on this on the forum or else on the internet. Is this a major problem or just a notification that can be ingnored.
View 4 Replies
View Related
Jan 5, 2011
Apache is set to start on runlevel 2, 3 and 5, just like MySQL. For some obscure reason this always fails. I tried resetting the runlevels, but this did not help and I always have to start apache manually after reboot.
How can I analyze this problem? In the Apache logs I don't find the cause. Is there an other log I can check?
View 9 Replies
View Related
May 23, 2010
I have Onboard Realtek ethernet card (eth0) it worked fine but suddenly it stopped working when i see in yast it shows hwinfo not found. when i use hwinfo --netcard it gives realtek card name thats all. I went to yast >lan> edit> hardware and tried to add r8169 module but it was not accepting. previously created ifcfg-eth0 file is available but its not getting up.when i say ifup eth0 it say interface not found. the same messg is also available in /var/log/boot.msg.
View 4 Replies
View Related
Jul 27, 2010
Running openSuse 11.2-64 on a DualCore / 2Gb machine.I have 3 nfs shares described in my /etc/fstabAll three were mounted at boot time when I was connecting to the network through the wired interface (eth0).I need to use the wireless interface, and even if that interface is up and running well (I use ifup), the nfs client doesn't start... if just after boot I do a mount -a or simply a nfs start, everything comes up and runs well.This machine will not be used by myself, and the users cannot just jump into a command line and type nfs start or even mount -a (they would need su privileges...)I have disabled the eth0, killed the eth0 config (with yast) edited /etc/sysconfig/nfs and setted the NFS_START_SERVICE to yes to force the gssd and idmapd to always start even if there was no nfs entry in fstab, but nothing changed.
View 7 Replies
View Related
May 23, 2011
kde knetworkmanager is not starting on startup.i am starting this manually every time on login to connect to network..how to make it start automatically?
View 9 Replies
View Related
Jul 17, 2010
I have written a simple perl program to add a command to iptables. Here is my code :
Code:
#! /usr/bin/perl
print "Content-type: text/html
";
system("iptables -A FORWARD -s 192.168.0.2 -j DROP");
I put this file in cgi-bin folder of Apache server. Here is my problem : when I run this file with shell as root user it makes change to iptables, but when I use my browser to run this file, it doesn't make any change. I'm sure this is because Apache doesn't have permission to manipulate iptables. How can I start Apache as a user with root privileges ?
View 8 Replies
View Related
Feb 19, 2010
is it possible to specify differnt settings for ssh depending on where somone is logging in from basically i want PasswordAuthentication yes when someone is logging in from 192.168.*.* but set to no when logging in from anywhere else
View 1 Replies
View Related
Sep 15, 2009
When I boot I get this error:
Starting CRON daemondone
Starting smartd done
Starting VirtualBox kernel moduledone
[code]....
View 1 Replies
View Related
Jul 2, 2010
New Intel x64 system installed with Opensuse 11.1 (like the KDE 3.5 option) and has been running well until today. Booting stops at "starting jexec services". Even while booting under "failsafe" system halts at "starting jexec services". Unable to boot to command prompt to attempt repair. Ran "repair" option from install disc with no good results. Still will not boot past jexec services.
View 2 Replies
View Related
Jul 8, 2011
My ISP offers the service of native IPv6. So my ADSL router provides me with a local and global IPv6 address. However after a reboot it takes minutes to finally see the global address when using "ifconfog eth0". During that time I can't do a ping6 to an external server, which seems logical. So I waited several minutes, but no global address. After that I started a KDE session, went back to the console(<Ctrl>+<Alt>+F1) and now the global address was there. Is this normal behavior or should I file bug report?
View 6 Replies
View Related
Dec 6, 2009
have search the web for answer and there are some suggestion. tried those suggestion but was not successful.appreciate if any one can help to resolve this? I'm running fedora 11 and using the NXserver for remote access
View 7 Replies
View Related
Jul 11, 2011
I have installed ZendServer CE on my distro and I have tried to create a startup file in this way:I create the file httpd in the folder /etc/init.d
I run chmod 775 httpd
I execute chkconfig --add httpd on
But this is the message returned from system:
insserv: warning: script 'K01httpd' missing LSB tags and overrides
View 1 Replies
View Related
Jun 30, 2011
Does it make sense to run sshd confined/protected by apparmor? I get tons of attack/hack attempts on my ssh port daily, I created a white list on my firewall to specify the IP addresses that can ssh into my network. I was also thinking of activating the sshd profile in apparmor for some added protection?
View 5 Replies
View Related
Oct 6, 2010
I'm testing upgrading from 11.1 to 11.3 and running into a major roadblock. When I try to ssh to the server after upgrading, I am unable to use password or pubkey auth to connect via ssh with my ldap user due to sshd segfault. I can however connect via pubkey to a local account on the system. Both auth methods work (for local users) when I disable UsePAM in sshd_config, but auth via ldap is required. My configuration works fine on fully patched installs of both 11.1 and 11.3, but not a fully patched 11.1 upgraded to 11.3. I've been at this for a while now trying various things but don't seem to be making much progress..
/var/log/messages:
Code:
Oct 6 20:33:15 susetest kernel: [ 1829.251921] sshd[3602]: segfault at 7f4bb0521240 ip 00007f4bb0509354 sp 00007fffdf212850 error 7 in libcrypto.so.1.0.0[7f4bb0449000+188000]/usr/sbin/sshd -ddd:
Code:
debug2: load_server_config: filename /etc/ssh/sshd_config
debug2: load_server_config: done config len = 431
debug2: parse_server_config: config /etc/ssh/sshd_config len 431
[code]....
View 3 Replies
View Related
Jul 27, 2011
This is a thread I've moved over from the install forum and is hopefully more focused. Sorry if I have violated some protocol. Problem I have a new machine build configured to dual-boot Windows 7 and OPENSUSE 11.4. Network performance in Windows is very good but network performance in OPENSUSE is very poor.
[Code]...
View 4 Replies
View Related
May 12, 2011
I have an opensuse 11.3 install which I want to set up as a network boot server to install Solaris 10 on a Sun Ultra 10 client. According to what I've read, this requires rarpd and tftpd which I've set up on opensuse, but also bootparamd which I can't find for 11.3. It seems it was last included with opensuse 9.2. Does anyone know if it's available, if I could use the suse 9.2 version, or any alternative?
View 3 Replies
View Related
Sep 14, 2010
I have an OpenSuSE 11.1 in vmWare ESX and every other boot I can't access any running network services (ssh, webmin, qmail, mysql, ...) from outside. I just need to login, reboot and voila - network services are working.I gradually updated to 11.2 and 11.3 by following the wiki with success but this problem remained. So I reverted to snapshot of 11.1 and now I would like to identify and solve the problem here first.I also looked at /var/log/messages /var/log/boot.msg /var/log/lastlog but can't find anything usefull. I will now compare those files from the working and non-working boot but meanwhile someone already has an idea or experience what could be wrong?
View 3 Replies
View Related
Jul 18, 2011
I installed OS11.4 on my old laptop, Compaq Armada E500., 512MB RAM, ATI Rage Mobility. During installation I chose "minimal server" and added some development packages, lxde and a little more. I chose to start in runlevel 3 which is full networking without X. Still, when computer is booted it tries to start Xorg which doesn't work because of some problem w driver. The start-up seems to stop there, it never loads completely - seems most things in runlevel 3 are not started (see below) I can manually login on laptop and fix it - but never permanently, same thing again after reboot.
I have checked /etc/inittab & yast - both states default runlevel is 3. I have checked services to be started both directly, browsing directory /etc/rc.d/rc3.d/, and with YaST, it is very clear X should not load during boot. But, as said, it does.. I don't really care about the driver problem right now, I can fix that later when I have more time. So how do I stop X from getting started automatically?
More info, if needed: The installation also stopped with message on tty1 "Starting YaST2" and tty8 showing errors with graphics driver (mach64). The system seemed to be installed though, so I simply rebooted (issuing "reboot" from tty2).
[Code]....
I'm not completely sure where it stops, network is configured but keyboard is wrong and mysql & everything after is not started, so somewhere between S02network and S06kbd. I'm going to use it as a server for testing purposes so no X is actually needed - however I do want to have X & lxde installed just in case, my Internet connection at home is terribly slow so I need most things I might need in the future installed today.
View 1 Replies
View Related
Oct 9, 2009
No matter if it is safe mode or regular the computer stops booting at Starting smartd I installed wine and samaba files (through Yast) before I restarted the computer and I was looking in FSTAB to get my HD's working. I didn't make any changes to FSTAB (I didn't even save the file).
View 1 Replies
View Related
May 13, 2011
I have to keep doing "dhclient eth0" every time I boot up. What should be in charge of doing this automatically at boot, and how do i fix it?
View 3 Replies
View Related
Dec 3, 2010
I'm not really sure what the problem is here, but sshd does seem to start on system boot. tty1 does list "OpenBSD Secure Shell server" at least. Also, # service --status-all; indicates that sshd is running, but if I try and actually ssh into my box, I get a "Connection refused" response.
I am, however able to restart the service manually and everything magically works again. Odd...?
View 1 Replies
View Related
Oct 5, 2010
I am facing a problem with my AT91SAM9260 customized board. Board is almost same as the evaluation kit.
I could download the binaries ( Bootstrap-v1.16, u-boot-1.3.4, linux kernel 2.6.20) successfully to the DATAFLASH/NANDFlash in my board by using atmel SAM-BA tool with usb/serialport/jlink.
Here I describe the problem.
When I power up the board, boot strap is not jumping to U-boot location, in the normal boot sequence and board stuck with bootstrap.
But when I disconnect/connect the JTAG USB cable ( provided with SAM-BA ICE) , it's jumping to u-boot location and booting the board properly. I'm getting the same error in NAND FLASH also.
I have tried one more test case.I copied bootstrap binary at the flash location, [location which is specified for u-boot binary] instead of U-boot.bin (location: 0x8400 in dataflash), I got continous bootstrap debug messages in my console. [ So can I conclude SDRAM doesn't have any problem? ]
Bootstrap code or U-boot code ?
View 4 Replies
View Related
Mar 25, 2010
recently i did a reinstall of debian lenny with gnome. My laptop has the broadcom wireless chip, and went and got the squeeze broadcom-sta deb packages and installed them, following the debian wiki. Everything seems to be running. iwconfig shows lo, eth0 both with no wireless connections and eth2 that seems to be running.My issue seems to be with the wireless configuration with network-manager. I have used this in the past and like it well enough and didn't have any issues with it. But for some reason, it is not working with this installation. It doesn't show up as a panel addition and when i try to command line call it up (nm-applet), the terminal just sits there doing nothing. I try to call it up as root, no dice - gives me the gtk-warning cannot open display issue that a xhost +localhost doesn't fix. Reinstalling network-manager and associated packages didn't work. So, fine, i tried the network monitor applet. I cannot select eth2, but by typing that into the connection name, i get a signal strength % - another indicator to me that the wireless chip is working - and then i'll click on the configure button, i get the root password prompt and nothing at all. I am currently seeing about setting the network up command line style, but the 'ol command line is not a strong point for me and everything i read sets things up differently. Other gui applications that require root privileges like synaptic work fine.
View 2 Replies
View Related
Sep 18, 2010
I have set up another arch Box... so far so good... enabled my wireless...In fact, I am typing from it right now...But when i boot, network start takes a while...I would like it to be faster...
Here's my rc.conf :
Code:
View 4 Replies
View Related