I have a Centos 5.4 server, I would like to know how to start NFS automtically when the server boots up so that I won't have to manually start the service after the server boots up. where and how do I accomplish this?
View 3 Replies
i use ubuntu 10.10 installed in wubi on my girlfriend's machine.in order to connect to the internet i had to install a dialer script and then i need to type in terminal: sudo cable-start and then password BUT i wish this to happen automatically when booting the machine.i am sure that it is possible, but have no clue how to do it.
View 3 Replies View RelatedOk, so I have installed apache 22, mysql5.0 and proftpd1.3. When I reboot my server, the above applications do not start up automatically, and I have been trying to figure out how with out much success. know that I need to make some changes inside the init.d directory on my CentOS Server.I am running CentOS 5.4 x86_64 build.I really am not sure how to accomplish the task or where to start.
View 4 Replies View RelatedI am still pretty green when it comes to centos and linux in general. I have installed rpm and source packages before with little trouble by following the guides available on the support site and wiki for centos.I am running centos 5.4 on a virtual server.I followed the guide for installing vpopmail at URL...mailSince this is a VPS server I cannot install gnome and is why I opted for vpopmail + qmail.
The first issue I have is: I don't know how to tell qmail to start up automatically because after the install of qmail from source as the guide told me to, it did not place a startup files in the /etc/init.d, and I can't find any useful documentation on how to trouble shoot that.I try to use "chkconfig qmail on" and "chkconfig --level 345 qmail on" but both give me the error "error reading information on service qmail: No such file or directory"The version of qmail I am using is the latest 1.0.3, and the version of vpopmail is 5.5.
Vpopmail seems to be working just fine, as is the mysqlauth mod. I check the vpopmail database in mysql, and all the values I used for the domain and user show up there.The settings also show in the qmail configuration directory files for the domain.My first clue as to something being wrong was that when I send an email to the address I setup, I get nothing delivered on the server, but I also do not get any bounce backs or errors to tell me the details of what went wrong.At first I figured it was my firewall, so I disabled iptables.That did not fix it.I also tried disabling SElinux. That also made no difference.
how to setup shoutcast to automatically start when i start my server?
i have installed it on /root/shoutcast ; configuration file /root/shoutcast/shoutcast_config
I installed apache 2.2 with centos 5.5. When I typed service httpd stop, apache stopped. Then in a minute, it automatic start again. I don't use crontab, and I tried 'chkconfig httpd off', but it still automatic start. I used 'ps -ef' to look process, I saw, httpd have PPID is 1, and then I find PID 1 have PPID 0.
View 1 Replies View Relatedhave search the web for answer and there are some suggestion. tried those suggestion but was not successful.appreciate if any one can help to resolve this? I'm running fedora 11 and using the NXserver for remote access
View 7 Replies View RelatedWhen I go to 'Places' on my panel, my windows drives are listed. I can click on one, it then asks me for password, then it puts a hard drive icon on my desktop. This is excellent.They are listed as '200 GB Filesystem' etc.My only problem, is how to make these icons stay after I shut down. I don't want to do this every time I boot up.
View 4 Replies View RelatedMy son dropped my laptop and broke the screen so I decided to use it as a project.
1 I managed to install kubuntu on it unfortunately it was the 64bit version not the 34bit one. The problem I'm having is that the external monitor only works after kubuntu boots up so I can not view the set-up boot options. What I want to do is put win 7 on it as I have a mate that needs a computer and he is pretty computer illiterate.
2:It will boot into G-parted and I have made a ntfs partition for the win 7 OS to go into. I have another duel boot desktop so followed what I did with that.The problem is that as I cannot see the initial start up screen and can get it to boot from the win7 boot disc that I have(this is a working cd I have used before) Is there a way I can get Kubuntu to automatically go into boot from cd on start up etc?
I am using SUSE 11.2. And I am really baffled with a strange NFS problem.I have set up the fstab on the client and exports on the server correctly, because if I manually run # /etc/init.d/nfs startStarting NFS client services: sm-notify doneI can see and use the NFS partition perfectly, there is no problem at all.But nfs cannot successfully start at boot. In yast, I have enabled nfs in "System Services (Runlevel)" at runlevel 3 and 5. So it should run automatically, but I always get the following error message:
/var/log/message:
Apr 10 20:07:56 hubble kernel: [ 33.654768] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[code]....
I have a 32-bit openSUSE 11.4 (2.6.37.6-0.5-default) installation with a
WNBA3100v2 wireless USB card and a 100Base-TX NIC running on a Dell 4700c:
Code:
BCM4401-B0 100Base-TX (Not connected)
MAC : YY:YY:YY:YY:YY:YY
BusID : 0000:04:07.0
Device Name: eth0
[Code].....
I'm wondering how I start it automatically when I boot up the ubuntu 10.04? especially, when I created the user "postgres", I set a password to it. every time I issued "su - postgres" command, I need to give it a password.
View 2 Replies View RelatedI have configured heartbeat+DRBD on a SLES10 SP3 cluster and that's working fine except when both nodes are down and I turn on only one node. When this happens, the heartbeat don't starts automatically (the service status says it's unused, so the services, IP address and partition don't start automatically too).
I can turn on the heartbeat manually (service heartbeat start) and get the services, ip address and partition initialized too, but I'd like to make it starts automatically because it's possible to have one node broken and the person that will turn on the other node can forget to manually starts the service.
-When the heartbeat is unused on the first node and I turn on the second node, the heartbeat on the first node starts automatically and everything is fine.
-The command "chkconfig heartbeat on" was executed.
I installed dansguardian & squid on 11.2 and things seem to run fine. Squid auto starts but dansguardian does not. I have checked Yast2's runlevel services option and dansguardian is enabled to 'Yes'. But when i check with 'service dansguardian status' it reports 'unused'.If i start dansguardian by hand, things work perfectly fine.I am in a desperate situation since there are 4 other computers which are dependent on this setup to work correctly
View 2 Replies View RelatedI have Windows 7 and Fedora 14 both on my laptop in dual boot configuration. When my computer starts up it shows a screen that says press any button to select another operating system to start, then I can make Windows 7 start. But after 2 seconds, if I DON'T press any button then Fedora starts automatically. How can I change this so Windows starts automatically when I don't press any button?
View 4 Replies View RelatedI have static eth1 defined. When I boot or restart, the networking will not start automatically - i must do it from terminal by ifup eth1.
Where can I put this command to have it autostart?
I just did a distribution upgrade on my laptop from 9.1 to 10.04, and it went fine for the most part except this issue. After it boots up, I don't see any window titles/scrollbars/borders and on clicking the icon for "Show desktop" on the bottom left, I see the following error message:
"Your window manager does not support the show desktop button, or you are not running a window manager."
After googling a bit, I realized that gnome-wm is not starting automatically and so I have to manually start each time to see the windows working properly. Can somebody tell me if there is a way to make sure that gnome-wm starts automatically? I know I can put it in my .bashrc but I want to do it the correct way if possible. If not, I will have to go with that workaround.
After an upgrade to 2.6.27.25-78.2.56.fc9.i686 in March, my Atheros wireless stopped working. (It had previously run without a hitch for 9 months). Anyway, I finally got around to working on it today and using the "WiFi misery" thread managed to consistently get it to start manually via these steps:ifconfig wlan0 up
iwconfig wlan0 essid netname key xxxxxxxxxxxxx
click on "activate" in network device control (gives error msg, but works)
During boot-up, I get "Invalid argument" errors for "SET MODE", "SET BIT RATE", and "SET ENCODE".Currently NetworkManager service is disabled, but when enabled doesn't seem to change any of the above.I'd like to get back to automatically coming up wireless, if possible.
Since I've updated to 9.10 my avahi-daemon sometimes won't start at boot.I've to "restart" it manually.I reinstalled it without success.Has anyone here the same problem? Or a useful solution?
View 1 Replies View RelatedWhen i start up the wireless is disabled automatically.
View 3 Replies View RelatedI just did a distribution upgrade on my laptop from 9.1 to 10.04, and it went fine for the most part except this issue. After it boots up, I don't see any window titles/scrollbars/borders and on clicking the icon for "Show desktop" on the bottom left I see the following error message: "Your window manager does not support the show desktop button, or you are not running a window manager."
After googling a bit, I realized that gnome-wm is not starting automatically and so I have to manually start each time to see the windows working properly. Can somebody tell me if there is a way to make sure that gnome-wm starts automatically? I know I can put it in my .bashrc but I want to do it the correct way if possible. If not, I will have to go with that workaround
what to do for lock automatically slackware 13 if not used for n minutes ?What can i do to start automatically the ktorrent (a bittorrent program for linux) on system starts on slackware 13 ?
View 2 Replies View RelatedI have a new HP G62-352CA with the Realtek 8191SE wireless. I am running Ubuntu 10.10 everything works fine except every time I restart the computer I have to press fn f12 to restart the wireless. Is there a way to have it default on at startup?
View 3 Replies View RelatedI have read some stuff but none seemed to work such as putting default=saved and in the window (other) section putting savedefault. hmm I know I can just specify the number after default but that breaks when a new kernel is installed. so any way to always make windows the default choice (so my wife will stop moaning
View 9 Replies View RelatedI have one server with Jboss and Tomcat installed, I have to start these servers manually everytime I do reboot the server.How I could do to start Jboss and Tomcat automatically, when I do reboot the server?
View 1 Replies View RelatedI just started setting up a linux box in the office...I have some experience with ssh commands but not setting up a linux system and stuff.The box is connected to our network but I have no clue how to make windows & osx talk with it. How can I go by doing that and also setting up an apache server to be able to connect through network. Right now I have apache/linux/mysql running it works when i go to localhost, but I would also like to let all the computers in office to access it. I would guess that will deal with virtual host which I know how to setup. I just need to setup an IP.
View 19 Replies View RelatedIm trying to run synergy on startup. This works fine on the client, but it wont start automatically on the server. I put this line in an entry in startup applications:
[code]...
but still no dice.
Server has been moved to a different locations and so the IP has been changed now the hostname is changed to something other that what it was before.
Could it be the rDNS that is causing this?
Note: this is not a DHCP connection.
I use Opensuse 11 with fvwm. How can I get conky start automatically when I start fvwm?
I setup the conky under fvwm session for my Opensuse 11 but it won't start automatically. I am wondering how to write some kind of scripts to force it to start automatically and with a delay about 10 seconds after fvwm starts.
Can anyone tell me what command can be used so that the Linux Centos Server starts mysqld, httpd and ftpd services at boot time automatically?
View 2 Replies View Related
