Fedora Installation :: System Does Not Connects Automatically When Start's To Eth0 - Changed Host's Name
Mar 26, 2009
now my system does not connects automatically when fedora start's to eth0 i have to connect it manually by pull down menu in the beginning hostnname was dbe272b22.dslam-172-17-161-245-0532-474.dsl.cantv.net i do not remember if the last part ".cantv.net" was there.... i changed hostname "dbe272b22.dslam-172-17-161-245-0532-474.dsl" maybe ending with ".cantv.net" with system-config-network for hostname "edicta" i modified /etc/hosts by hand twice, now do not remember what i did exacly but here you can see /etc/hosts
[Code]....
View 2 Replies
ADVERTISEMENT
Jun 21, 2010
One of our client was complaining that their server was down and mysql and apache services were down. The server is Ubuntu 8.04. When we checked, the permissions of /etc/init.d/mysql and /etc/init.d/apache2 were changed to 644 from 755. How could this be possible?I need your valuable suggestions on how can i monitor whether any malicious intrusions or scripts are running.
View 2 Replies
View Related
Oct 5, 2009
I just recently installed Fedora 11 and I notice that the network connection will not connect automatically. Basically I am trying to get to a point where it automatically connects without anyone logged in. (I hope that makes sense) Right now I have to log in as a user in order to get eth1 to connect and get an IP.
View 8 Replies
View Related
Dec 17, 2010
I installed Debian Squeeze on my system two days ago, using a wired connection to internet (which worked fine). After that, I had to install the non-free wireless package in order to scan wireless networks. It now works fine, and I can connect and get to internet. But with wired connection, i connect via eth0 and none of my applications work. And they're not in offline mode.Also, i already went here: URL,,, and I checked if that was my case. I tryed what they say several times in some different ways, but I still can't connect. Even more, if I change something like they say, I get "unmanaged device" and I can't even connect to the internet. And the wired connection works, I'm using it right now on my ubuntu 10.10.
If you want more information, I just tried to ping sites like google.com or ......com using network preferences and it does work, it gets 100% of the packages back around 50ms later, so the internet appears to work. Also, when I connect via wireless, everything works perfectly.
View 12 Replies
View Related
Nov 29, 2010
I'm running Slackware-13.1 on my laptop. Connection to my network is via wlan0, a cable in most cases not pluged in.When starting the system the first attempt to configure the network is via eth0, which ends with dhcpcd timing out since there is no cable pluged in. Afterwards wlan0 is set up properly.
I have installed ifplugd, which is a daemon who connects to ethernet only if a cable is connected. With Gentoo this works out of the box. With Slackware ifplugd is started after rc.inet1 (probably). So the the system still tries to connect via ethernet before connecting to the wireless network.
I have also installed wicd.How can I manage that wlan0 is prefered over eth0?I noticed that neither wicd nor ifplugd belong to the default full installation of Slackware and therefore assume, there must be a solution which meets my requirements without even one of both programs.The laptop is only used at home. Wireless connection is normaly used. I need eth0 only in a case of emergency.
View 2 Replies
View Related
Feb 20, 2009
I have a problem with running Apache web server. I think my problem is either I can not get httpd to load automatically or it's being blocked from external unless I'm logged in, don't know which. Or, I'm completely off base. Either way, being logged in solves the problem. Now I just need to fix it. This is a brand new server running latest apache and fedora 10 (all fully patched). Loaded from source to all default (non RPM directories - apache is /usr/local/apache2/... )
I modified the existing /etc/init.d/httpd script and had it point to the /usr/local/apache2 areas.I even did a chkconfig --add httpd and show it is on for run levels 2345.The problem is that when I reboot the server httpd does not load because I can not access the website.However, the minute I login to the server as a user (non-root) it automatically loads httpd and the website works.Then, when I logout, everything is inaccessible again. I even tried to put the commands in the /etc/rc.local script (or wherever it is).Same thing happens.I know this is a simple fix. Just don't know what it is. Is it related to SElinux? However, wouldn't SElinux create access problems regardless of being logged in or not? Once I'm logged in, everything automatically fixes itself (either it's a service load or a rights filter fix).
Remember, everything works perfectly as long as I'm logged in to the server (even as a non-root user). Just the act of logging in makes the web server accessible from to the rest of the world. However, when I logout, the web server is inaccessible.
View 5 Replies
View Related
Oct 31, 2010
1st, i managed to make a VPN connection to my server and after a reboot i get this:I've tried everything that google gives me with "ubuntu vpn service failed to start pptp" search terms.2nd, I've got a DSL connection (PPPoE) to the internet. When i connect it, eth0 looses it's ipv4 ip (I've disabled ipv6). How can I keep it?
View 1 Replies
View Related
Sep 18, 2010
I've been running an Ubuntu VM (10.04 LTS) on my Win7 (Home Premium 64bit) desktop successfully for several months now using VMPlayer (v3.1.1). My problem began when I booted up the VM today - my wife decided to reboot the PC without gracefully closing down my applications when Windows told her that she needed to reboot to complete security updates.
When I booted up the VM, the Ubuntu desktop went right back to the exact same state that it was in before the host reboot - the same programs were open, I didn't need to log in, etc. However... I now have no networking. The network icon (NetworkManager Applet 0. shows the red exclamation point. If I click on Auto eth0, it attempts to connect for a bit, and then says "offline".
My VMware Player settings for this VM are configured for bridged networking, and the "network adapter" icon shows online. If I go into the VMWare Player settings and change the networking to NAT, and then click on Auto eth0 again, the networking comes online. However, I don't want NAT - I want this Ubuntu client exposed to my network with it's own IP address.
At this point, I'm really not sure if the problem is within Ubuntu or within VMWare Player, or something on my Win7 host. I have zero skill at troubleshooting within Ubuntu - still fairly new to the linux scene. My Windows firewall is turned off. DHCP is enabled on my network, and the router is available.
Any ideas on how I might further troubleshoot this problem?
View 1 Replies
View Related
Mar 31, 2011
I work from home writing web content, and need the use of an article spinner tool called "The Best spinner". It is an .exe file and I installed it in my Mint Debian edition machine using wine, and everything is fine except for one thing. The app opens out, connects to the net, and then closes automatically. In fact if I check on the internet activity, I can see the app downloading the latest version, but the problem is that always it closes within a few seconds leaving me no other choice other than to log into a windows machine to work on it.
I uninstalled and reinstalled the app a couple of times but it does not seem to have helped. It requires the .net packages in winetricks, and I read that wine does not support net very well, yet the app is installed and even connects to the net. I don't understand the underlying process of how windows apps work in wine. Any work around considering that I never log into windows for anything other than using this app, a workaround means that windows is gone forever from my life.
View 2 Replies
View Related
Mar 5, 2010
I have configured a VPN connection to a remote router which connects ok. I can ping the remote router IP, but cannot ping any other IP on their network.I have put this down to needing a route added. I can manually type # route add -net 192.168.1.0 netmask 255.255. 255.0 dev ppp0 and all works like I want it to, but I really need this to be automatic everytime the connection starts.I have tried following URL... but cant get it to work. The file is called /etc/ppp/ip-up.d/routing and has execution priviledges (755) so ive hit a dead end.
View 3 Replies
View Related
Aug 17, 2009
I have installed Oracle 11g on 5.3. Now, I am trying to START and STOP oracle automatically on system startup and shutdown. I am following this link To have this effect, I have created /etc/init.d/dbora
Code:
#!/bin/sh
# chkconfig: 345 99 10
ORA_HOME=/oracle/app/oracle/product/11.1.0/db_1
[code]....
View 4 Replies
View Related
Jul 9, 2010
I can't start eth0 and have read thru many of the threads on this and can't figure it out. What does this message mean?
Code:
[jeff@chladni ~]$ ifup eth0
Active connection state: activating
Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/13
[Code]....
View 1 Replies
View Related
Jan 6, 2011
my eth0 connection is not automatically connected when fedora starts. I checked " activate device when windows starts" in network configuration. still it is not auto connecting and after connection the network icon is not changing to connected status although it is connected.
View 4 Replies
View Related
Dec 4, 2009
I wanted to change screen resolution manually from xorg.conf and apparently a missed it up and my fedora core stucks and wont start, how can i start fedora in command line (so that i can remove xorg.conf), i tryed ctrl+alt+f1, ctrl+alt+backspace and still cant start in command prompt.
View 10 Replies
View Related
Mar 29, 2010
I just finished installing Fedora 12 on a rack mount server. I was modifying the /etc/sysconfig/network-scripts/ifcfg-eth0 file to use a static IP address, but now nothing works. The device does not boot on start up or anything.Currently, ifcfg-eth0 looks like:
Quote:
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=none[code].....
The eth0 device does not start on boot; the server does not get the IP address, is not reachable over the network, and will not connect to the internet....
View 2 Replies
View Related
Feb 15, 2010
make Dovecot automatically archive the servers copy of the email if/when a client connects to it using POP? I am trying to achieve the the same thing as Gmail's feature.
View 1 Replies
View Related
Aug 28, 2009
i heared that in fedora 11 with new kernel version comes ext4 as default file system. when i was upgrading fedora 9 --> 10, i just changed repos in /etc/yum.repos.d. now the question, if i upgrade my system, will my file system got changed, and if it does, will my data got damaged?
View 4 Replies
View Related
May 30, 2011
All of a sudden my production system changed to read only. Ran fsck and it ran for about 5-10min before it crapped out. Now when rebooting, getting an ext3-fs error, attached is an image. The system is on an ESX environment.
View 1 Replies
View Related
Sep 11, 2009
Can you guys help me diagnose what the problem is? SSH doesnt' start automatically.
View 1 Replies
View Related
Aug 11, 2009
I have Centos 5.3 on my home computer. When I was logging-in to the terminal it was like ( myname@34myhome.local$ ) now when I log-in to the terminal I get (myname@dhpdpc64$ ) I have not changed anything. It seems like my domain name has changed. Why the domain name changes automatically?
View 5 Replies
View Related
Jan 25, 2010
what to do for lock automatically slackware 13 if not used for n minutes ?What can i do to start automatically the ktorrent (a bittorrent program for linux) on system starts on slackware 13 ?
View 2 Replies
View Related
Jan 24, 2010
After my update to 9.10 I had not notice that CUPS, Samba, lighttpd (and maybe other serives that I've not missed until now) don't start up during system start no longer. After all, things look quite normal in the directory /etc/rc3.d, which has the appropriate links S20samba, S20lighttpd and S50cups, all of them working when I use them directly. But wait! Ubuntu uses updstart now, does it? I have yet to understand what that means to the classic startup scripts in /etc/init.d.
View 9 Replies
View Related
Jul 10, 2011
Can I do it? I followed the installation by using apt-get install piwigo.
View 2 Replies
View Related
Aug 21, 2010
I have a configuration of:
Intel Pentium Dual Core 2.40 Ghz cpu
Intel DG31PR desktop board
2 GB adata DDR2 (800 BUS) ram
NVIDIA Ge-Force 8400 GS NX84GS series PCI express
It's the first time I was installing a linux. First I collected an extra hdd for the installation. I used the entire drive for ubuntu 9.10 installation. It installed without any problem except the special features were turned off. It was said that the special features and animations would start only if their is a sufficient graphics processor. I picked up a solution and from the hardware drivers option, installed the nvidia graphics card. Problem started when i restarted my pc. The resolution automatically changed into 800 X 600 px. I changed it to 1280X1024 (which is highest for my monitor). But when I restarted again, it again became 800X600 px. And it becomes like this everytime I restart.
View 9 Replies
View Related
Dec 6, 2009
have search the web for answer and there are some suggestion. tried those suggestion but was not successful.appreciate if any one can help to resolve this? I'm running fedora 11 and using the NXserver for remote access
View 7 Replies
View Related
Jan 31, 2011
I just installed a fresh copy of Fedora 14. When I am browsing the internet it seems like it takes forever to look up the host. In firefox I went and disabled the IPv6 option and it seemed to fix the issue, but Chrome is still having the problem. Is there a way to change this setting in Chrome?
Also I have installed conky but I can't figure out how to get it to start automatically when I log on? Can someone point me to the file I need to edit to make it work?
View 5 Replies
View Related
Aug 1, 2011
sudo still works, but every time I run it, it says it's unable to resolve the host. I tried to change stuff in visudo, but there wasn't anything about the host as far as I could tell.
View 9 Replies
View Related
Apr 26, 2009
how i can start to host my own personal website on my own server that i just created.I was wondering if there were tips you can give me or a site you can recommend me to where i can get lessons on how to host my own site on my own server using fedora 10.
View 2 Replies
View Related
Mar 24, 2011
I have a server with two NICs. I tried to bond their network interfaces together, but it bombed out and didn't work, despite the fact I copied the example 100% except for my own numbers for addresses, etc. I decided to go back to a single NIC and let the other unused for now, since I need to get this server running. uh. yesterday.
[Code]...
When I boot up, often times eth0 isn't listed in ifconfig. I'll see eth1, which is just an unused interface at the moment, but eth0 is no where to be found. If I restart the network service, bam. I'm good. Why is it not auto coming up?
View 4 Replies
View Related
Jul 26, 2010
I can't open my terminal anymore. I changed a preference under the Title and Command tab in the preferences of the GNOME terminal. I put a custom command instead of the normal shell, but after I closed I realized that under the "When Command Exits" menu, I chose "Close Terminal". This means that the terminal closes automatically as soon as the command is done. After I open, it finishes the command and closes. I was wondering whether there is some way to change the terminal preferences from somewhere else or reinstall the terminal, and I obviously can't use terminal commands.
View 6 Replies
View Related
