I have a big LCD screen.I make it 90 degrees retated to play games .But I want to know :if I can get rotation in boot up? I'm using Fedora 12 in KDE. My screen display driver is Intel . I think can write something into /etc/X11/xorg.conf to make it,or write into KDE's init script /usr/bin/startkde ( if there is a command like"rotate 90",then I can write it here).
View 3 RepliesI'd like to have Firefox startup automatically in full screen after logging into gui mode.
I figured out log in automatically after searching this forum but cant figure out how to get apps to start up automatically.
I just replaced my older monitor with a slightly newer, much nicer Dell 1905FP. I need to have it rotated, but I have no clue how to rotate it. I have seen several xorg.conf modifications that are supposed to work for some of the nvidia drivers, but nothing for the generic radeon driver. The radio buttons in SaX2 are grayed out as well. How do I set up X11 to rotate my display? Preferably without installing the other ATi driver, as I have tried before to switch to that one, and have been unsucessfull.
View 5 Replies View RelatedI have a slight problem with setting of a stylus in my Tecra m7. It works fine when screen is in default position, but when I rotate the screen to vertical (left/CCW) touchpad and stylus input does not change so when I move it up it it goes right ^^'
xinput goes like this:
Code:
I already tried few .sh's from this forum archives but it didn't seem to work. I disabled driver for graphic card, because recommended version showed only violet screen when starting system and older version does not support rotation. I use Ubuntu 10.10 with Gnome.
I have an HP Pavilion tx2000 tablet, wich is working perfectly in Ubuntu 10.04. The touch and the stylus works out of box, and i'm using the script that Favux has posted to rotate my screen and i've installed the wacomrotate daemon, wich is working too. Now, I've two questions: How to calibrate it? The stylus is ok, but the touch isn't calibrated. In Karmic, I was using wacomcpl and xsetwacom, but neither of them detect my tablet now (in 9.10, Hal was used to detect the tablet, now it's xserver-xorg-input-wacom).
[code]...
It's possible to set up the automatic screen rotation, like in Windows (the screen rotates automaticaly in tablet position)?
Recently installed ubuntu on my gateway m275 tablet alongside windows xp tablet. Everything, including the stylus/pen without any poking around. However, I'm having trouble getting the screen orientation to rotate.
If I go to system-preferences-monitors, the only option for rotation is "normal".
Here is my xorg.conf:
Code:
I just installed ubuntu 10.04.02 on to my tablet, aside from the dreaded intel video problem. Install went ok, but I'm finding now. That when I rotate the screen, the touch screen isn't adjusting to match. I'm not really ubuntu savvy.
View 6 Replies View RelatedCould i install ubuntu and whenever i boot my pc up, is it possible to boot up automatically into windows without any OS choosing screen appearing; and instead only boot into ubuntu when i have the livecd in my drive and boot from it?Im the only one who knows about Ubuntu in my family and most would be quite confused if they didnt find thereselves booting into windows as they normally would. So to get around this and to have Ubuntu at the same time, i want to only be able to access ubuntu by putting in the live cd and booting it from that. Or is it possible for information that i download etc. to be stored onto the livecd itself?
View 9 Replies View RelatedI am running a dual monitor setup, and prefer to have my secondary monitor rotated 90 degrees. I am able to do this in Gnome using preferences, and am wondering how to accomplish the same in XFCE.
View 6 Replies View RelatedI have configured /etc/syslog.conf for writing user level log messages, and it is working fine.
The line which i entered is: user.* /home/shekhar/obj/myjob.log
But the log file keeps increasing. I would like to rotate the log file when it reaches 100Kb.
How do i do that in red hat linux ?
I have fedora 10 and I rotated my display upside down using Display settings (I don't know if it is the same thing as system-config-display, I had an icon called Display settings on my panel). It didn't work, my screen became black and now I can't change it back. Can I somehow change it back using terminal only? There's no rotation set in my xorg.conf file, I tried to set different rotation in xorg.conf, but it had no effect.
View 2 Replies View RelatedFedora 12 64-bit
Asus mobo M4A78-E
Samsung 2494HM display
The captioned display support 90 deg rotation. Which software do I need to install?
Tried editing /etc/X11/xorg.conf as;
I am having trouble getting grub to automatically boot into ubuntu server. When I turn on my server the grub menu shows up and shows me the choices. They all work fine except that grub wont automatically select one. This wouldn't be too much of a problem but this is a headless server and I can't boot into ubuntu without a keyboard. I tried looking through the grub 2 documentation but nothing seemed to work when I edited the conf file.
View 1 Replies View Relatedhave search the web for answer and there are some suggestion. tried those suggestion but was not successful.appreciate if any one can help to resolve this? I'm running fedora 11 and using the NXserver for remote access
View 7 Replies View RelatedMy pc has two operating system, XP and Fedora 14 I was setted PC to Auto turn on with BIOS, after turning on, system was booting in fedora automatically after 10 seconds.
But, After i upgrade to fedora 15 via terminal(Preupgrade), that auto booting has disabled. I should Press Enter to boot into Fedora 15. It should be have auto booting into feodra 15 like when i was fedora 14.
One question: should F13 mount all attached USB devices after boot automatically? I guess it should. However, what I've experienced is that after boot and login, my USB modem + flash memory is not mounted. I need to manually unplug it and plug it again, and then it's mounted
View 1 Replies View RelatedIs it possible to save a workspace so that it automatically opens every time you boot Fedora?
I like having Pidgin, Evolution, VLC, and Transmission open in the 4th workspace all the time. Sorry if this has been asked, I searched and found nothing, and this is the first Linux OS I've ever used!
I have Windows 7 and Fedora 14 both on my laptop in dual boot configuration. When my computer starts up it shows a screen that says press any button to select another operating system to start, then I can make Windows 7 start. But after 2 seconds, if I DON'T press any button then Fedora starts automatically. How can I change this so Windows starts automatically when I don't press any button?
View 4 Replies View Relatedbuilding an install cd or dvd media that will automatically install the Linux software on a client pc. There is no network connectivity so the client can only be loaded with Linux from CD or DVD media. The crux of the matter is that I can not automatically install the Linux software on client WITHOUT typing linux ks=cdrom:/ks.cfg at the boot prompt.
I want to avoid any user prompts and just have the software install with the RPMS that I need for this client pc at the boot prompt. Actually, when the boot prompt commences, I would like the software install to start with no user intervention. I've tried several different methods in isolinux.cfg, but the OS always wants boot prompt for the cdrom. Can the boot prompt information be read automatically from the isolinux.cfg with out user intervention? I'm looking for the same behavior as a LIVE CD that kicks off with no boot prompts after a few seconds. Here's a copy of my isolinux.cfg
default linux
prompt 1
timeout 600
display boot.msg
F1 boot.msg
F2 options.msg
F3 general.msg
F4 param.msg
[Code]....
My software RAID setup is as follows.
/dev/md0 (made from sda1 and sdb1) RAID1 /boot partition
/dev/md1 (made from sda2, sdb2, and sdc2) RAID5 / partition
Earlier on I had some trouble with my sda drive, it dropped itself from both arrays, screwing up the mirroring of my two raid partitions participating in the /boot partition. I eventually got everything sorted out and back in sync. (I also have grub installed to MBR on both sda and sdb). Things are working fine regarding that, but since then I've had this issue:
During boot up, I'll get an error message that it could not mount my /boot partition (when fstab is set to either /dev/md0 or the UUID). It claims c9ab814c-47ea-492d-a3be-1eaa88d53477 does not exist!
My fstab:
Code:
[mark@mark-box ~]$ cat /etc/fstab
#
# /etc/fstab
# Created by anaconda on Wed Jan 20 16:34:41 2010
[code]....
As far as I know, it isn't neccessary for /boot to be mounted always, correct? Although, as I understand, I need to have it mounted whenever making kernel changes correct?
I have a Linux program which can write information to stdout and stderr.
I have a shell script which redirects that output to a file in /var/log. (Via >> and 2>&1.)
Is there a way to make that log file rotate? (max size, then switch to a different file, keep only a limited number of files)
I've seen a few answers which talk about the logrotate program, which sounds good, but they also seem to be focused on programs which are generating log files internally and handle HUP signals. Is there a way to make this work with a basic output redirection script?
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies View RelatedWhen i boot the fedora image from a dvd i'm not being taken to the fedora live system screen, instead i see a bunch a words on a black screen (looks like DOS)...am i having compatibility issues or what? ive tried 32bit, 64bit versions as well as different desktops. does anyone have any ideas? my laptop is brand new: toshiba e205 running windows 7 ultimate..
View 2 Replies View Relatedthis morning i cannot boot the pc, it stops always on the screen with the logo of fedora in the middle. I think that the reason are maybe the last updates of yesterdayhow can i solve it
View 8 Replies View RelatedI choose a rotating background for the desktop (astronomical pictures). How can I stop this rotation and decide to keep a specific picture instead of letting the system rotate the background every few seconds?
View 6 Replies View RelatedAfter the last upgrades I've noticed that when booting up Fedora 12 the blue screen with the ball that fills up and then turns into the Fedora logo has magically changed into the old boot up of the growing line at the bottom of the page the fianlly says Fedora 12 in the lower right hand corner. What's with that? What would make it change? Also when shutting down it says in times roman font "Shutting Down." What caused the change?
View 1 Replies View RelatedI'm connecting via ssh to an Ubuntu server that has a physical display attached.I'd like the physical display of the server to remain locked while I'm connected remotely.Is this possible? How? Also, is there a way to automatically unlock the screen for the VNC session, which is made from localhost via an ssh tunnel?
View 1 Replies View RelatedI have up graded to natty 11.04 and am trying to get magick rotation 1.4 working on my hp tx2000 model 2130ea.I have spent a lot of time reading the forums and trying stuff including breaking natty a few times and had ton do a reinstall. Anyway I am not to sure what I am doing wrong missing a script or something I have tried a few different ways to try and rotate screen at the moment I have magick rotation installed and the only thing I can do with it is turn on/off touch and if I move the courser over the green arrow icon a drop down box appears saying its loading. I did turn on the bug report and this is what it says I attached the log.
View 7 Replies View RelatedI can't seem to get my ldap.log file to rotate on Ubuntu 9.10. I've added to the logrotate.conf file the following..
/var/log/ldap.log {
missingok
monthly
create 0660 root utmp
rotate 1 }
I have also tried putting the path to the file /etc/logrotate.d/rsyslog. Restarted services and still no logrotation for the ldap.log..
I installed Ubuntu with a partition that was too small for any practical use, so I installed it again, thinking it would simply overwrite the other one as Windows would do. Obviously not. Now I have two Ubunto installations, neither of which work. I get a White Screen after the Ubuntu thing that shows its progress. If I try to boot from the CD, the Ubuntu thing works again, then I get a completely garbled screen which is totally unreadable and unuseable. I should also mention that I originally installed with a 19" square flatscreen from HP, but have upgraded to an Acer H233H. Since I have no clue what to do whatsover Ubuntu is just taking up space. I'd like to be able to use it, and I'd like to be able to get rid of one or other of the installations.
View 9 Replies View Related