Fedora Networking :: Broadcom BCM4310 - No Wifi After Fresh Install
Jun 27, 2009
I have had a search around, any cannot find any thing I can make sense of as to how I go about getting the above card to work with Fedora 11. Just done a fresh install (need Linux for some development) but have no wifi. My chipset is this Broadcom BCM4310. There seems to be a whole load of options, and I don't know which works and which don't:
kmod-wl
broadcom-wl
ndiswrapper
I can sit with an Ethernet cable to install/update as necessary, but really could do with wireless.
View 3 Replies
ADVERTISEMENT
Jun 15, 2011
i am using broadcom wireless (4312) on my laptop with FC15 and configured it using [URL]. initially it ran great without any problem (for a week). but from yesterday, every 15 minutes or so, my wifi started getting disconnected, showing the wireless login screen . I can reconnect only by rebooting or restarting network manager service.
View 6 Replies
View Related
Sep 10, 2010
I am succesfully installed a Dell wireless card with Broadcom 4328 shipset using ndiswrapper and rpm sources on Fedora 12 2.6.32.14-127.fc12.i686.PAE. Now I am using original Win drivers but the wifi conection is very slow and unstable.
The wifi card runs perfectly on win 7.
This is the lspci -vvnn outpput
03:00.0 Network controller [0280]: Broadcom Corporation BCM4328 802.11a/b/g/n [14e4:4328] (rev 03)
Subsystem: Dell Wireless 1500 Draft 802.11n WLAN Mini-card [1028:000a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
[Code].....
View 7 Replies
View Related
May 12, 2011
get WIFI working on my Dell D600 with Ubuntu 11.04 freshly installed. I some limited sucched following the this post t=1621331 this got the card working but it was very very slow over 70% packet loss to the WIFIrouter. 1. Machine details Dell Latitude D6002 Wireless Broadband and Chip setlspci -nn | grep Broadcom - 02:03.0 Network controller [0280]: Broadcom Corporation BCM4309 802.11a/b/g [14e4:4324] (rev 02)3. Check interfaces
eth0 Link encap:Ethernet HWaddr 00:0b:db:e0:1c:5b
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[code]...
View 5 Replies
View Related
Apr 20, 2010
Using karmic on acer aspire 5332.Wifi was working from fresh install but would drop out often and sometimes freeze laptop resulting in hard reset.Installed Ndiswrapper to try wireless drivers unfortunately i can't get them to work. How can i revert back to original ubuntu drivers?
View 1 Replies
View Related
Dec 23, 2009
I just did a fresh install of 11.2 on my Thinkpad (previously running 11.1) and am having trouble with getting wifi to work properly. My wireless will not connect reliably. Sometimes it connects after reboot but then drops and will not reconnect. Below in line 4 of the status query you can see that it says DHCP4 client NOT running.
ifstatus wlan0 wlan0 device: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) DHCP4 client NOT running wlan0 is up 5: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 00:13:02:4e:66:38 brd ff:ff:ff:ff:ff:ff
Configured IPv4 routes for interface wlan0:
default 192.168.1.1 - -
[Code]...
View 9 Replies
View Related
Sep 1, 2011
I just got done with a fresh install of 11.04. So far I like the new update and face lift. The only thing I do not like is that I can not use my laptops WiFi I have a Compaq Presario V5101US. Below info is from doing lspci command in the terminal...
Code:
Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
View 9 Replies
View Related
Jun 27, 2011
Im using natty in lenovo b460. After installation was not able to connect to wifi. Ethernet is working alright. So searched for additional drivers and installed the Broadcom 43xx drivers. After restart the network applet says the wireless is disabled by hardware switch, even after it is switched on/off several times.
Lenovo B460
kernel:2.6.38-8-generic 32-bit
Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
ubuntu 11.04
[Code]...
View 1 Replies
View Related
Jun 19, 2011
i have a broadcom BCM4311 802.11b/g WLAN [14e4:4311] (rev 01) wireless adapter on a dell 1501 run by ubuntu 10.10.this particular model and revision is suppose to be absolutely supported by linux and indeed it did work perfectly before the user ran a upgrade from ubuntu 10.10 to 11.04.subsequently i have reinstalled 10.10. as i recall when i installed ubuntu 10.10 the first time i simply ran the System>Admin>Additional Driver installation tool to make the wireless work. i cannot recall if i ran the b43 or the sta driver but i have tried both this time and had no luck.
i am aware that the broadcom adapters are notoriously troublesome and i have tried the two workarounds here URL... as well as their third alternate workaround with no success.
View 3 Replies
View Related
Sep 1, 2011
I just got done with a fresh install of 11.04So far I like the new update and face lift. The only thing I do not like is that I can not use my laptops WiFi I have a Compaq Presario V5101USBelow info is from doing lspci command in the terminal.Code:Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
View 2 Replies
View Related
Mar 9, 2011
I have an emachines D620 laptop running Ubuntu 10.10 with a Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01). I havent done anything with it and cant seem to get it to work. I know this because when I had visto on it the card worked, but know it says that its firmware is not enabled and ive tried installing the drivers using the Additional Drivers under Administration. I would like it to be working so I can use my laptop's internet.
View 5 Replies
View Related
Aug 9, 2011
How to install and use the Broadcom 802.11 Linux STA driver (broadcom-wl) I orginally had wireless but reinstalled Fedora 15 and have been trying for days to get it working with no success
lspci
00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge (rev 02)
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller (rev 02)
[code]....
how to use Fedora - how I fluked it the first time - but havent had any luck since reinstall
View 8 Replies
View Related
Mar 3, 2011
I have a HP Pavilion dv6-2155dx Entertainment Notebook with Broadcom Wireless Lan Driver.
I didn't want to bother anyone with this, but I just could't find a solution. I was happy using Ubuntu 10.04 LTS Desktop Edition, because the wifi was working fine, but I messed everything up dealing with networking in terminal.
So formated and now I have Ubuntu 10.10 Netbook Edition, but that didn't solved my problem at all, because my wifi driver still unfunctional.
Before anything, I tried commands like "dbus restart" and "network restart".
So after reading that I can install by getting ndisgtk and the .inf file, I downloaded the right driver from HP Support's page of my notebook. Extracted the package with Wine (got some error because I wasn't running Win7, of course, but that doesn't matter.).
I did this: [url]
And this is my final result:[url]
Technical informations:
Quote:
View 1 Replies
View Related
Jun 16, 2011
I just installed 9.10 and I can't detect any wireless networks. Is the card compatible with 9.10? Do I need to install any drivers? If the card isn't compatible with 9.10 is it compatible with later versions of Ubuntu? Marking this as somewhat urgent as I need to get internet access for some coursework soon, and also because my parents will kill me if they find out I've done anything unusual with the laptop because it's new and they think anything non -MS is a virus.
View 9 Replies
View Related
Jan 13, 2011
My kernal version is 2.6.35.6-45.fc14.i686 (2.6.35). I have installed fedora 14. I dont have a wired network connection , so as mentioned in one the threads [URL]... i downloaded the RPM fusion of the driver and followed the steps. This is the first time m installing linux ,i have no idea if my kernel is kmod version. But when tried installing any of those codes provided it gave an err saying NOTHING TO DO. But my network manager doesn't show the wlan. It still says driver firmware missing. When checked the loaded kernel it did have ssb and b4. I did blacklist them. But reappears everytime i check and wl is not loaded.CAN anyone please help me know wat I should do?
View 5 Replies
View Related
Feb 16, 2010
I go into the settings and select "manual" and put in my IP, gateway, mask, and DNS. It never lets me use the "apply" button.
View 3 Replies
View Related
Jan 18, 2010
just installed it with a duel boot with windows, installed it using a live boot cd that i burned. seems like everything is good except i have no wifi i tried to do an update and possibly get the fix and i get an error when trying to install the updates..looks like i have more issues than i thought.. did i mess up by installing from the live cd?
View 14 Replies
View Related
May 31, 2011
I have an HP 5101 mini notebook. It used to run quite happily under Fedora 14 after running yum kmod-wl-PAE .
Fedora 15 seems to not have any simplistic solutions. I am confused by rebuidling the kernel and would like a simpler solution if possible.
Here is the lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
[Code].....
View 4 Replies
View Related
Jun 20, 2011
I have having trouble getting my broadcom wifi card working, it is a BCM43225 802.11b/g/n. I did mange to get it to work but after reseting Fedora 15 would not boot. How to get the WiFi card working that would be awesome.
View 2 Replies
View Related
Feb 23, 2010
Can't get my WiFi to work on my HP. My WiFi chip is bcm4303 (rev. 2) this is a new thread from http://ubuntuforums.org/showthread.php?t=1400427&page=4 ) So, I reinstalled Ubuntu (fresh install) Activated the Broadcom b43leagacy Wireless driver. When rebooting, the WiFi LED on the On/Off switch blinks.
[Code]...
View 9 Replies
View Related
Nov 7, 2010
I still try update my broadcom drivers, because when I try use airodump-ng i receive error.
This error:
Interface Chipset Driver
eth1 Unknown wl (monitor mode enabled)[code]....
I dont know why receive this error WARNING: modpost: missing MODULE_LICENSE() in /home/mobile/Desktop/wdriver/wl.o
see include/linux/module.h for more information
View 4 Replies
View Related
Dec 13, 2010
I installed Ubuntu 10.10 amd64 online today. I was using 10.04 32-bit before, and the network drivers were easy to find and install. Ubuntu did the job for me and they worked flawlessly. It was a relief I didn't need to search around.
Even though 10.10 (64bit) found the drivers for me, both ethernet and wireless, they do not seem to be working alright. I installed both, made a restart. I found that the WiFi light on my laptop stays on, even if the wireless network is turned off using either the key combination (Fn+F2), or manually turning it off.
Issues with the ethernet? I am right now using ethernet but it does not care to detect the connection. Empathy won't connect automatically as a result- says no network connection. But here I am, posting this. Evidently, there is a connection, right?
Issues with the wireless? The WiFi light stays on all the time, and it isn't able to get hang of the connection I have at home. It just won't show any wireless connections available. When I tried to connect by giving it the SSID and the encryption type and password, it didn't work. Just kept asking for the password again and again (I have checked with the router- the password is correct).
View 2 Replies
View Related
Dec 24, 2010
ok basically i have a new dell inspiron n5010 with a broadcom 4313 wifi card. it doesnt work with ubuntu studio 10.10. I have the drivers all installed and it works on ethernet with the broadcom STA proprietry driver. if i disable this driver the eth doesnt work. but the driver shows its working (screenshot-1).
There is no pop up or anything in the task bar for detected wifi. i open the network settings and it shows up with a wifi option but i have to go into properties and manually type in what i have "the_den_meribel". which didn't work. (screenshot-2).
i have tried the other driver broadcom-sta-common and that doesnt make it work either. screenshot-3. i did try to install the "lp-pphhy" or whatever it is (seacrh for firmware-b43 in synaptic).
i have a list of results from what i have typed into the terminal: dell inspiron n5010
Code:
sam@drytopubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
[Code]....
View 8 Replies
View Related
Jan 8, 2011
I just put 10.10 on my D830 and I love it except for a delay when I'm using the internet. When I click on a link while surfing the web it takes about 13 seconds before it responds. After that it works just fine.
My Windows 7 PC and my Macbook Pro don't do that so I'm guessing it has something to do with Ubuntu.
View 5 Replies
View Related
Jun 14, 2011
I just installed the 64-bit Kubuntu 11.04 and i've been having some issues getting the wifi to work. At first I went to additional drivers and activated the STA driver and restarted. After restarting when I went into the network manager and any option for wireless was disabled.
[Code]....
View 1 Replies
View Related
Sep 1, 2009
I chose to change my operating system from Microsoft Xp to Linux and finally chose Fedora to be my new OS.
After Fedora installation I got a problem that I cannot connect to my wireless network I used to using Xp, I think that my wireless card is not installed on Fedora because when I checked in the network configuration I found that the only installed adapter is the Ethernet Realtek for the wired connection.
My OS is Fedora 11.
The CPU Model name is : Intel (R) Core (TM) 2 Duo CPU T8300 @2.40 GHz, so I think that my architecture is x86_64.
My Network controller is : Broadcom Corporation BCM4312 802.11b/g
View 14 Replies
View Related
Jun 12, 2009
Just tried new Fedora 11 yesterday, did a fresh install with ext3 /boot and ext4 file system, booting looks great, but wireless doesn't work. I have tried using broadcom-wl, dnmouse script, dnmouse broadcom f11 rpm, fwcutter but not ndiswrapper
Code:
# rpm -qa | grep broadcom
broadcom-wl-5.10.79.10-2.fc11.noarch
Code:
# lspci -nn
02:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)
Code:
# lspci -vvv | grep 4312
02:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
Subsystem: Hewlett-Packard Company BCM4312 802.11b/g Wireless LAN Controller
ifconfig only shows eth0, lo and pan0 interfaces, and got nothing from iwconfig...
Code:
# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
pan0 no wireless extensions.
Even tried to blacklist b43 after installing broadcom-wl driver, but no luck. Broadcom-wl works fine with Fedora 10 on my laptop, is it possibly because of the new ext4 file system? Should I try ndiswrapper or install Fedora 10 again and do a preupgrade? I also use fedora at work.
View 14 Replies
View Related
May 4, 2015
I recently finished a mini-itx machine and everything was working great with a fresh Jessie install. I put in a PCIe wifi card and now the computer won't boot. The power LED is on, the PSU fan is spinning, but I get no display output at all and I don't know how far into the boot process the thing even got. I removed the card and the machine boots fine again.
I only have one PCIe slot so it is my only option, I don't have another PCIe card to try, nor do I have another machine to test the wifi card in. The card is brand new, for what it's worth.
WiFi card: [URL] ....
motherboard: [URL] .....
View 1 Replies
View Related
Aug 14, 2009
I'm trying to get the Broadcom BCM4312 Wifi working on my HP 2133 MiniNote.I have tried:
(from here http://linuxwireless.org/en/users/Drivers/b43 )
$iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[code].....
View 8 Replies
View Related
Mar 28, 2011
i am using fedora 14 in my lenovo z560 laptop. It contains broadcom wifi card. The configuration is.Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g LP-PHY [14e4:4727] (rev 01) Subsystem: Broadcom Corporation Device [14e4:0510] I want to inject monitor mode in my laptop to run kismet . But i can't. I installed broadcom-wl driver in my laptop but i think its not compatible to run monitor mode..
when i run kismet it show me error that :------ try some other open source kernel driver And the other is :- kismet find only binary value eth1 port. It isn't detecting wlan0 port
View 10 Replies
View Related
