I have having trouble getting my broadcom wifi card working, it is a BCM43225 802.11b/g/n. I did mange to get it to work but after reseting Fedora 15 would not boot. How to get the WiFi card working that would be awesome.
View 2 RepliesMy laptop is the one mentioned in the title. And it's completely offline at the moment.
Code:
$iwconfig
lo no wireless extensions.
Seem to have some troublesome chips.
Code:
$ lspci
03:00.0 Ethernet controller: Atheros Communications AR8151 v1.0 Gigabit Ethernet (rev c0)
05:00.0 Network controller: Broadcom Corporation BCM43225 802.11b/g/n (rev 01)
code....
although in my case they should be for the 2.6.33.3-85.fc13.x86_64 kernel.
And I've been searching that repo for ages now, and I can't seem to find anything with kmod-wl or broadcom in there. I'm well aware that this is most likely because of my own ignorance as to the build up of said repo.
Wireless Card
07:00.0 Network controller: Broadcom Corporation BCM43225 802.11b/g/n (rev 01)
If you haven't added any repositories to your system you will need to do so before using zypper to install the required packages below. (instruction on how to do this under heading add repositories below)
Short Fix (This fix works if you haven't already installed b43-fwcutter firmware, and the b43, ssb kernel drivers are not load.)
zypper remove b43-fwcutter
zypper in broadcom-wl broadcom-wl-kmp-desktop
modprobe wl
reboot (and wifi worked after I activated it using FN F3 to turn it on)
Long fix if required
code....
List of Repo's I have added
1. main (contrib)
2. Mozilla
3. Packman
4. Wine
5. Kde Extra's
Packman and Main (contrib) are the most likely sources of the required files.
Once you have added these you should be good to install the required files.
One final note, I had to use an external usb wifi card to connect to the internet to add the repo's and download the required software. Lan card support coming in 2.6.38 kernel (it is suppose to add a driver for our lan card).
just installed it with a duel boot with windows, installed it using a live boot cd that i burned. seems like everything is good except i have no wifi i tried to do an update and possibly get the fix and i get an error when trying to install the updates..looks like i have more issues than i thought.. did i mess up by installing from the live cd?
View 14 Replies View RelatedI have an HP 5101 mini notebook. It used to run quite happily under Fedora 14 after running yum kmod-wl-PAE .
Fedora 15 seems to not have any simplistic solutions. I am confused by rebuidling the kernel and would like a simpler solution if possible.
Here is the lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
[Code].....
i am using broadcom wireless (4312) on my laptop with FC15 and configured it using [URL]. initially it ran great without any problem (for a week). but from yesterday, every 15 minutes or so, my wifi started getting disconnected, showing the wireless login screen . I can reconnect only by rebooting or restarting network manager service.
View 6 Replies View Relatedget WIFI working on my Dell D600 with Ubuntu 11.04 freshly installed. I some limited sucched following the this post t=1621331 this got the card working but it was very very slow over 70% packet loss to the WIFIrouter. 1. Machine details Dell Latitude D6002 Wireless Broadband and Chip setlspci -nn | grep Broadcom - 02:03.0 Network controller [0280]: Broadcom Corporation BCM4309 802.11a/b/g [14e4:4324] (rev 02)3. Check interfaces
eth0 Link encap:Ethernet HWaddr 00:0b:db:e0:1c:5b
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[code]...
I have had a search around, any cannot find any thing I can make sense of as to how I go about getting the above card to work with Fedora 11. Just done a fresh install (need Linux for some development) but have no wifi. My chipset is this Broadcom BCM4310. There seems to be a whole load of options, and I don't know which works and which don't:
kmod-wl
broadcom-wl
ndiswrapper
I can sit with an Ethernet cable to install/update as necessary, but really could do with wireless.
I am succesfully installed a Dell wireless card with Broadcom 4328 shipset using ndiswrapper and rpm sources on Fedora 12 2.6.32.14-127.fc12.i686.PAE. Now I am using original Win drivers but the wifi conection is very slow and unstable.
The wifi card runs perfectly on win 7.
This is the lspci -vvnn outpput
03:00.0 Network controller [0280]: Broadcom Corporation BCM4328 802.11a/b/g/n [14e4:4328] (rev 03)
Subsystem: Dell Wireless 1500 Draft 802.11n WLAN Mini-card [1028:000a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
[Code].....
I'm trying to get the Broadcom BCM4312 Wifi working on my HP 2133 MiniNote.I have tried:
(from here http://linuxwireless.org/en/users/Drivers/b43 )
$iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[code].....
i am using fedora 14 in my lenovo z560 laptop. It contains broadcom wifi card. The configuration is.Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g LP-PHY [14e4:4727] (rev 01) Subsystem: Broadcom Corporation Device [14e4:0510] I want to inject monitor mode in my laptop to run kismet . But i can't. I installed broadcom-wl driver in my laptop but i think its not compatible to run monitor mode..
when i run kismet it show me error that :------ try some other open source kernel driver And the other is :- kismet find only binary value eth1 port. It isn't detecting wlan0 port
I am drowning in Broadcom over here. Fedora 15 with Broadcom 4313 wireless inop. I believe that I have made every attempt to get this Broadcom 4313 off and flying that is posted on this, and many other, forums. I had the wireless working on this laptop yesterday when I made an error with a NVIDIA driver that caused me to be unable to boot. I updated/reinstalled the kernel and the fun began. Here is where things are at. note the broadcom version fc13? No idea why that would be 13.
[Code]...
i'm having some difficulties will my wireless on my friends hp dv4. It has a bcm4312 card and so far i've downloaded the kernel headers and the devel pakages, aswell as the broadcom hybrid driver. After i've un tar'd the file i type in make and it come up with
KBUILD_NOPEDANTIC=1 make -C /lib/modules/`uname -r`/build M=`pwd`
make: *** /lib/modules/2.6.34.7-61.fc13.i686.PAE/build: No such file or directory. Stop.
make: *** [all] Error 2
but as for my knowledge of linux i'm at my limit, if it wasn't for Archive Manager i probably wouldn't have been able to untar the file
Ubuntu seems to think my device is disabled. The switch is on and the blue light next to the switch is also on. I read up on this on other threads, but the solution involved using the cd. I had to install from windows using the iso and alcohol 120 because my cddrive is totally dead.
View 3 Replies View RelatedI'm sure you've seen this question before -- I tried searching but I can't find a clear answer. All I need is to get my wifi up and running in Ubuntu 10.04. I'm currently double-booted with XP on a Dell Latitude E5400 laptop. I'm in Windows right now. I can't post my lpsci readout because I can't access the internet from Ubuntu -- no access to wired connection.
I worked on this problem for a long time last night and fixed it somehow by installing a driver program -- it had "cutter" in the name. Today, however, I try to log in and Ubuntu won't connect to an open wifi point. Boot #1 it recognized it but wouldn't connect. Boot #2 it wouldn't recognize it at all (said "wireless is disabled" even though it wasn't. Boot #3 it would recognize the wifi point but wouldn't connect.) I can mantain a constant connection to this wifi in Windows XP and also on my Android phone.
I just want someone to please tell me how to get my wifi working reliably. I'm excited to switch over to Ubuntu, all I need is for the wifi to work. My wifi card is a Broadcom 43xx (4312?). Something like that.
I've been reading up on how to get the Broadcom BCM4312 802.11b/g on my Dell Inspiron 1525 to work with OpenSUSE and I've tried everything, I've even re-installed the OS 3 times as I seemed to keep screwing something up. I've tried doing what it says in this thread
Install Broadcom Drivers from Packman
I thought I'd installed the write drivers with this code:
Code:
zypper in broadcom-wl broadcom-wl-kmp-default
Been all over the net looking for some helpful solution to geting the wifi connection working.tried several and no go...ethernet connection is fine. does anyone have a sure fire way to get this running...quite a noob with ubuntu and have managed to find the "additional drivers" with both the B43 and the STA and tried to activate them but didnt help.was into "synapticP manager" and did the search for the B43-fwcutter etc and that didnt help...was into the "terminal" with a command to download updated drivers etc...cant recall the command right now..but that didnt work.when i go into the network connections... for wired I have "auto etho" and under wireless there is nothing. HP Mini 210-1000 Ubuntu 10.10. I have puppy linux on a pen drive and it is able to find and activate both ethernet and wireless odd that ubuntu is having all this grief
View 11 Replies View RelatedA friend gave me an HP Mini 110 that I can actually use in some situations. I installed Debian 8 with LXDE. It runs well except for the expected lack of driver for the Broadcom 4312 wireless chip. I installed wl using the method shown at [URL] ....
It works fine except that it takes very long to set up WiFi at boot (1 min 30 sec or more every boot--this is a rather frail Atom processor) and the WiFi reception seems poor (65% from an excellent router at 25 feet).
I'm thinking of getting a Panda 300Mbps Wireless N USB Adapter (reportedly using the Ralink RT5372 chipset) and removing the Broadcom driver. I have 2 questions:
1. Could I expect the Panda not to slow my boot time so much? I'm not knowledgeable enough to tell whether there is stable kernel support of this device, although the manufacturer says repeatedly that it works with most Linux distributions.
2. To remove wl is Code: Select allmodprobe -r wl the correct approach?
I have just joined the Debian community, for the past 2 years I have been using Linux Mint (ubuntu), I am now using Linux Mint Debian 64. I have a Lenovo A700 ideacentre with a Broadcom 4313 WiFi card. I manage to get the card working, now I have a new problem. If I suspend the machine the WiFi will not connect on resume. Is there a simple command I can use to getting the connection restarted, or better yet a work around so it will restart on its own?
View 14 Replies View RelatedI've installed new drivers and when I go to connect the MAC address shows up on the router but only for a few seconds and then disappears and I can't access wifi. I've even attempted opening up the router and still can't connect.
View 2 Replies View RelatedI am having a problem while connecting to a D-Link Access Point with Multiple ESSID. It keeps saying activating but in the end nothing. I am using KnetworkManager & there is no Encryption on the Access Point.I am able to get connected with another machine using windows.Here is my hardware info:
0c:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
Subsystem: Dell Wireless 1397 WLAN Mini-Card [1028:000c]
Kernel driver in use: b43-pci-bridge
& the logs:
Feb 3 15:44:00 Shiraz-Suse kernel: [ 316.188245] wlan0: authenticate with f0:7d:68:17:e5:a4 (try 1)
Feb 3 15:44:00 Shiraz-Suse kernel: [ 316.191262] wlan0: authenticated
Feb 3 15:44:00 Shiraz-Suse kernel: [ 316.191501] wlan0: associate with f0:7d:68:17:e5:a4 (try 1)
Feb 3 15:44:00 Shiraz-Suse kernel: [ 316.194008] wlan0: RX AssocResp from f0:7d:68:17:e5:a4 (capab=0x421 status=0 aid=1)
[Code]...
I just bought a Lenovo B560, everything working except the Broadcom 4727 wireless (only in terminal it works)
View 4 Replies View RelatedIm using natty in lenovo b460. After installation was not able to connect to wifi. Ethernet is working alright. So searched for additional drivers and installed the Broadcom 43xx drivers. After restart the network applet says the wireless is disabled by hardware switch, even after it is switched on/off several times.
Lenovo B460
kernel:2.6.38-8-generic 32-bit
Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
ubuntu 11.04
[Code]...
i have a broadcom BCM4311 802.11b/g WLAN [14e4:4311] (rev 01) wireless adapter on a dell 1501 run by ubuntu 10.10.this particular model and revision is suppose to be absolutely supported by linux and indeed it did work perfectly before the user ran a upgrade from ubuntu 10.10 to 11.04.subsequently i have reinstalled 10.10. as i recall when i installed ubuntu 10.10 the first time i simply ran the System>Admin>Additional Driver installation tool to make the wireless work. i cannot recall if i ran the b43 or the sta driver but i have tried both this time and had no luck.
i am aware that the broadcom adapters are notoriously troublesome and i have tried the two workarounds here URL... as well as their third alternate workaround with no success.
i'm having a lot of trouble getting my wifi to work on my dell inspiron e1405 laptop. I looked through the forums and tried a few solutions to no avail
View 9 Replies View RelatedI'm installing Squeeze on on a Dell Latitude D830 laptop with a Broadcom BCM4328 wireless network card, and I'm stuck on getting wireless internet to work. I have the 2.6.32-trunk-686-bigmem kernel. I run KDE and I have knetworkmanager installed to sort the network connections out. Unfortunately, knetworkmanager cannot find any wireless networks for eth2 (the wireless adapter). There is a wireless network, as other equipment can still connect to it.
I've installed the broadcom-sta drivers according to http://wiki.debian.org/wl. When I run iwconfig, I receive the following output: eth2 IEEEE 802.11abgn ESSID:"" Mode:Managed Frequency: 2.412 GHz Access Point: Not-Associated Bit Rate: 14 Mb/s Tx-Power:off Retry min limit: 7 RTS thr:off Fragment thr:off Power ManagementMode: All packages received Link Quality=5/5 Signal level=0 dBm Noise Level=0 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 missed beacon:0
[Code]...
I am having a problem with the driver, I do lspci | grep -i net and this is my driver: Broadcom Corporation BCM4321 802.11a/b/g/n...I have tried this: URL.. (I have debian squeeze) and it created a eth1 interface.I do ip link set eth1 up and after that I do : iwlist scan and it works, but when for example I try iw dev eth1 scan it doesn't work it says nl80211 not found.And when I try to run hostapd (which is my final goal) it also says nl80211 not found.
View 1 Replies View RelatedWifi works on 11.3 with installed the broadcom-wi & broadcom-wl-kmp-desktop,but this trick doesn't work on this new 11.4.
View 9 Replies View RelatedI just got my new ubuntu 9.10 os desktop version installed into my lenovo laptop but then my WiFi is not working. Previously I had a broadcom driver which currently is not functioning with the ubuntu 9.10.
View 2 Replies View RelatedI've been using Ubuntu for a few years now and in general am very pleased with it; it's Achilles Heel is however WiFi.My daughter has an older HP laptop with built in Broadcom wifi, Lucid did not recognise this, neither did it recognise a Netgear PCI card or a Netgear USB adapter.Network manager showes wifi greyed out.lspci -vnn shows BCM4303 802.11b [14E4:4301] (rev 02)lshw shows *-network:1 UNCLAIMED and shows product as BCM4303 802.11b wireless LAN controller.Wifi is the most popular connection method for the average user, until it is made simpler to resolve problems a lot of potential Linux users
View 3 Replies View Related