CentOS 5 Networking :: Intel(R) PRO / Wireless 2200 / 2915 Driver Doesn't Work
May 31, 2009
Wireless networking doesn't seem to work. When I try to create a new network interface with system-config-network, my wireless card doesn't show up. The following comes from dmesg:
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
[Code]...
I saw a post about this elsewhere and downloaded some firmware drives from [URL] and installed then. But, I'm really out of my league when it comes to this kind of stuff.
View 2 Replies
ADVERTISEMENT
Jun 1, 2009
[URL]
Quote:toracat wrote:Quote:Reason for custom build is the need to disable ieee80211 and ipw2200 pre-built module in kernel. Trying to get wireless working, and I want to use the later versions of these modules in the hope to get wireless working.
View 4 Replies
View Related
Aug 2, 2009
My intel pro wireless 2200 NIC doesn't work anymore. Yesterday it did, but not today (I didn't do anything special, so that it could go wrong).What is ucode and -62? Any ideas? I already checked the forums and found that ipw doesn't work when ndiswrapper is loaded. Well, I don't have it loaded. What happend?
View 8 Replies
View Related
Jun 12, 2011
I just changed over from Ubuntu to Debian Squeeze and now my WiFi doesn't work. My computer is a Toshiba Satellite and the wireless card is Intel 2200bg. I think that's the name of it. That's the driver, anyway. My router is using WPA2, and using iwlist scan, I can see the network just fine. When I try to connect, though, it starts to connect for a while, says it's validating authentication, then says it fails. I've triple-checked my password and it's right.
View 9 Replies
View Related
Oct 23, 2010
No wireless networking. The ethernet works fine, and the wireless interface itself works well in Windows 7 (dual boot). Tried: Ndiswrapper, notoriously quirky, does not seem to work with the XP driver (the oldest driver available for the RTL8191SE). The linux driver offered on the manufacturer's website lacks any installation instructions. I have no clue how to install a linux driver. SUSE seems to have two network managers that are constantly complaining about control: Network Manager and Yast. Neither are great and I am left missing my Ubuntu.
However, my audio only seems to work on SUSE. I have tried almost every distro on this machine. Ubuntu lacked sound and wireless, Fedora played startup sounds, but would not play an mp3 or wav file (fiddling with the mixer did not help). And Fedora also lacked wireless support. PCLinuxOS, my favorite, lacked sound and wireless. Tried some oldies too. ELE, DSL, Puppy, Ubuntu Netbook remix, Vector, Browserpuppy, Crunchbang, Cruncheee (just for experimental sakes) and probably others I am not remembering. So far, installing a free linux distro has cost me 14 dvd-R's and countless hours of installing, reformatting and reinstalling. Part of me really wanted crunchbang to work, as I love the minimalism and blacked-out theme.
I need wireless network access. The wireless light remains red in Linux and pressing the key does nothing to start the device. In Windows 7 it always lights white and works perfectly. Why hasn't SUSE adopted a gui for ndiswrapper? Other distros have it. Why is my brand new laptop, which is by no means abnormal in make or configuration, not 100% supported natively by any Linux distro? I just updated to the new kernel yesterday. So I should be running the most modern operating system available. Yet good-ol Windows 7 is my only fully functional environment.
View 6 Replies
View Related
Dec 20, 2010
I am a linux newbie, I spent more than 3 days trying to set up the drivers for my Intersil Prism 2 Wi-Fi adapter on CentOS 5.5. While trying to Make the driver source I receive errors of missing libraries. Is the hostap driver included in the Centos Kernel? I tried with insmod hostap but it didn't work..? Is there a kernel patch with the hostap drivers? I will be glad if someone can give me ideas or directions for setting up the driver properly.
View 1 Replies
View Related
Jun 22, 2011
I've been with Ubuntu since about 10.10 and a little before, but did a trial. I just installed 11.04 tonight, and my wireless driver is having an issue. I installed it, and reset my computer to complete the installation, but it still doesn't pick up anything wireless, just Ethernet.
View 4 Replies
View Related
Aug 21, 2010
I can't get my card Intel Wireless 5300 AGN to work. I'm running Slackware 13.1 and it's a full, fresh install.I get to show up with lspci -v:Network controller: Intel Corporation PRO/Wireless 5300 AGN [Shiloh] Network Connection...But it will not show up with 'ifconfig' which will only list the local loopback (yes we have have a eth problem as well but one thing at a time).
View 5 Replies
View Related
Oct 8, 2010
trying to connect wireless on wlan0 intel pro wireless 4965 AG or AGN
View 1 Replies
View Related
Dec 15, 2009
I'm using this card on a Toshiba Tecra M3 laptop. Firmware is installed. iwconfig shows the following:
Code:
eth1 radio off ESSID:off/any
Mode:Managed Channel:0 Access Point: Not-Associated
[code]...
View 2 Replies
View Related
Jun 4, 2010
Intel 5100 wireless card doesn't connect on 10.04?
View 1 Replies
View Related
Aug 29, 2010
I'm very new to Debian (and Linux in general), and am currently taking a Linux course at college... I'm trying to get Debian running on my MacBook Pro (late 2009 model) and it's been complicated but I've got the operating system installed on it... I'm just having a few problems, the biggest right now of which is my wireless card, which doesn't work. So, I found instructions on the Debian Wiki for getting the driver for it, but it's not compiled already and I have little knowledge of manually installing stuff through Linux...
View 2 Replies
View Related
May 6, 2010
I upgraded to OpenSuse 11.2 and just about the only thing that doesn't work is my wireless internet. From my research, I should be using the iwl4965 or iwlwifi driver; however my system seems to be running iwlagn. I have no idea how to switch it as neither of the correct drivers can be found in my yast, and I've failed to find any information about this on the Intel® Wireless WiFi Link drivers for Linux* website.
View 9 Replies
View Related
Feb 20, 2010
I have Centos5.4 loaded on a late 2008 MACBOOK Pro and would like to get wireless working. I've attempted to download the broadcom driver and create a driver module with no luck.
Using these instructions....
[url]
When I make the WLAN driver, I get this:
View 2 Replies
View Related
Jun 7, 2011
I just installed Fedora 15 yesterday and can't get wi-fi to work. When I click 'on' on the Wireless label, it goes back to 'off' immediately. When I open the Network Settings menu and disable Airplane mode, the Wireless connection goes on and then off immediately. I took a look at /var/log/messages and it shows this:
[Code].....
View 5 Replies
View Related
Jan 20, 2011
CentOS 5.5 -=[slimg00dy@localhost: /mnt/signature-drive-320/Downloads/iplist/fedora]=- $ cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.14rc3 (Wed Mar 14 07:25:50 2007 UTC).
View 5 Replies
View Related
Jun 3, 2010
I have a Dell Dimension 2200 with an Intel Celeron 1.3 Ghz processor. Will OpenSuse 11.2 work on this system?
View 3 Replies
View Related
Mar 12, 2009
working to sort out the damn wireless for too long. Mine in cent05 5.2 . network manager is on and I can see the icon on tray. It list all the wireless connections too, but just won't connect. WPA encry is disabled. further details below:
# lspci | grep Wireless 0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
# ethtool -i eth1
driver: ipw3945
version: 1.2.1dm
firmware-version: 14.2 1:0 ()
bus-info: 0000:0c:00.0
[Code]...
View 5 Replies
View Related
May 19, 2011
Recently I have installed Fedora 14 on my other laptop. It's a dual boot with Windows 7. Everything worked perfectly fine, networking included, until my friend didn't accidently turned off the wireless by pressing a wireless button on the laptop. Since then the wireless on Fedora doesn't work. It does on Windows thought. I've tried restarting the laptop few times, but the wireless still doesn't want to work again.
View 2 Replies
View Related
Feb 3, 2010
I have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
[code]...
View 1 Replies
View Related
Dec 4, 2010
i'd like to extend that ma intel wifi link 5100 is not detected no more after perform upgrade package( upgrade the kernel too ). when im using command 'lshw -C network' , there is appear to be detected, but not on command 'iwconfig' or even 'ifconfig' it just show nothin. also network-manager no longer show that ma wireless is work properly anymore.
the old kernel : 2.6.25-22 ( my wireless detected and usable )
the new kernel : 2.6.25-23 ( my wireless detected and unusable )
View 4 Replies
View Related
May 16, 2010
i upgrade a machine running centos 5.4 to 5.5 this morning. After the update the X start i saw the pointer and a black backgroud only the desktop doesn't appear.The machine is a barebone with this configuration
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)[code]....
and i solved the black screen problem changing the driver for i810
Section "Device"
Identifier "Videocard0"
Driver "i810"
EndSection
View 2 Replies
View Related
Jul 6, 2009
Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05) is not working on centos5.3
# uname -r
2.6.18-128.1.16.el5
# lspci | grep Wireless
0b:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
[Code]....
View 3 Replies
View Related
Jun 27, 2009
This will be a little long (having read Phil's 'how to ask questions' FAQ). I'm trying to get OpenVPN working between my CentOS server and some Windoze laptops running XP. There seems to be plenty of sample
config files available, but to date, none of them have worked for me. Pulling out my trusty Wireshark, I've found some clues,
BACKGROUND:
My local subnet (NAT'ed by my gateway router) is 192.168.52.x. My router has been configured with a conduit (port-forward) for port 1194 (the standard OpenVPN port), which points towards my CentOS server.The CentOS server is .52.112, and the supplicant is .52.110. I have tried the lient both inside and outside my local subnet, with no difference in events or outcomes.
[Code]...
View 2 Replies
View Related
Feb 7, 2009
I have an intel 5300 wireless chipset which is not supported in kernel 2.6.25. I am currently using opensuse 11.0, I downgraded from 11.1 since I faced so many other problems. can I setup my wireless driver under kernel 2.6.25? if so, how could i do this?
View 7 Replies
View Related
Nov 2, 2009
I got myself a shiny M305 Logitech mouse for my laptop. It comes with a littlee USB wireless dongle. When I plug in the dongle, DMESG shows me that the system notices the dongle:
usb 5-1: USB disconnect, address 6
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
usb 5-1: new low speed USB device using uhci_hcd and address 7
usb 5-1: configuration #1 chosen from 1 choice
input: Logitech USB Receiver as /class/input/input15
[Code]...
View 4 Replies
View Related
Aug 4, 2011
I recently reinstalled Fedora 15 on my laptop and have been unable to get the wireless driver to work as it has before. I successfully installed the akmod-wl package from rpmfusion, built the akmod successfully, and rebooted with no success.
View 1 Replies
View Related
Apr 17, 2011
I used to be able to connect to the wireless but recently Ubuntu has gone waywards on me.How do I find out what wireless hardware I have? How do I get the right driver for it?Currently I can identify the wireless but cannot connect. Connecting with Ethernet works.
View 4 Replies
View Related
Nov 15, 2010
I'm running Ubuntu 10.04 on my laptop. Up until about a week ago, my wireless worked fine, but now it rarely connects. Sometimes the connection indicator shows that I am connected, but when I click on it it doesn't show any active networks. Even when I use a wired connection it doesn't always work.
View 3 Replies
View Related
Dec 31, 2009
I've a Centos 5.1 server on S5000vsa Intel board with 6 bay HD in raid 1 mode (2 HD), and working fine until I've decide to make a yum update. Today the Centos is 5.4 but seems necesssary to upgrade the megasr driver for the raid function (i.e. , is not possible to contact the raid firmware trought Web Console 2). I've download the last megasr driver from Intel and I follow the instruction to upgrade the driver with s.o. installed, but when I start the server and choose via grub the new img boot file, the display show :
megasr.ko invalid module format -1 and stop. The linux version is the same in the machine (uname -a) and from the driver (2.6.18-164.9.1.el5). Another question : in Intel instruction spoken about megasr.o , but on img file I found a megasr.ko . I think instructions referre to old linux 2.4
View 3 Replies
View Related
