Ubuntu Multimedia :: Just Installed - Sound Doesn't Work - Intel ICH6?
Jul 21, 2011I just installed ubuntu, and it seems the sound doesn't work with my sound card, it is part of the Intel ICH6 family. I don't get any output at all.
View 1 RepliesI just installed ubuntu, and it seems the sound doesn't work with my sound card, it is part of the Intel ICH6 family. I don't get any output at all.
View 1 RepliesI have recently moved to 9:10 and I found some problems with the sound card Intel. Reading some posts I managed to partially solve the problem and now I hear the music perfectly but only from the headphones: but I need to "unflug" external amplifier in gnome-alsa-mixer each time I reboot otherwise I not even feel the headphones
lspci:
00:1 e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04)
aplay-l
[Code]...
I have a Gigabyte mainbord with an Intel IHC9 sound chip. When I configure it via YAST the test-sound plays fine, and when I issue:
sudo speaker-test -Dplug:front -c2 -l5 -twav
some friendly voice starts speaking as well.
But:
speaker-test -Dplug:front -c2 -l5 -twav
doesn't bring about anything sound-like.
My settings are stored at:
[URL]
My Xv doesn't work in Karmic. When I use Jaunty it works well. How can I turn it on
Code:
xvinfo
X-Video Extension version 2.2
[code]...
I have made a custom kernel a few weeks ago, and just today the sound on everything isn't working. Upgraded alsa to 1.0.24 to try to fix and nothing... What do I need to do?
View 2 Replies View RelatedBasically what the title says.I have an ASUS P7P55 WS SUPERCOMPUTER motherboard with the latest BIOS.
View 2 Replies View RelatedI am trying to use JACK for some audio applications, but I have had no success until now I'am using Ubuntu 10.04 on my Dell Inspiron 6400. Kernel 2.6.32-33.
The following is the QjackCtl log:
p, li { white-space: pre-wrap; } 14:38:48.196 Steckfeld deaktiviert.
14:38:48.377 Statistik zurckgesetzt.
[code]....
When I installed my 64 bit system of Ubuntu 10.04 the sound worked very well and I were very happy. The problem started however when I installed Skype which uses pulseaudio. As soon as I start skype (or any other application that uses pulse, HoN for example) the applications sound output or input does not work at all. If I have pulseaudio started in some way, applications that I suppose do not use it like spotify or flash player stops to produce sounds. And when I type "pulseaudio" in the terminal it gives me this:
[Code]...
I'm running xubuntu 10.04 and I've installed media codecs as per the " Comprehensive Multimedia & Video Howto " thread. I also have faac, libfaac0, faad, and libfaad2 installed. But when viewing some videos or trying to transcode to anything with the aac codec I get the "no AAC" error.How can I fix this?
View 2 Replies View RelatedI just installed 10.04 but sound doesn't work.
$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03)
[Code]....
I have these Creative Inspire M4500 4.1 surround sound speakers.I got them to work succesfully on my older computer by installing the ALSAmixer. and then unmuting the channels. However on my new computer even after installing ALSAmixer, i cannot seem to be able to get playback from my rear two speakers. I tried the community ubuntu documentation and ALSA's own guide(which seemed too complicated for me.)
View 9 Replies View Relatedive just installed dosbox, my favorite dos emulator. in windows, i usually used to play doom and both sound and video worked flawlessly. when i tried running doom in dosbox in ubuntu, the game ran perfectly, but the problem is with the sound. the soundblaster sound effects stutter and are not even working at times. the soundblaster based music doesnt even work! i either blame pulse-audio or the defaut config settings.
View 1 Replies View Relatedi just reported a bug to launchpad (#511562. i'm not sure if this bug is in flashplugin-installer or pulseaudio.when i use firefox or chrome for watching a flash video from videos for example, all works good. i then transfer the sound to a remote sink using sound preferences > output > internal audio analog stereo on myuser@otherhost. after this is done, the flash video halts. this is also true if i restart firefox and start a new video, already having transferred the sound. sometimes you can see the video taking huge skips forward. for example, on a 3 minute music video, i see 3-4 different frames from different places in the video. the sound is ok though! 100% reproducible and if i transfer the sound back to local speakers the video resumes and plays perfectly.
View 1 Replies View RelatedI have made a pretty sizable mistake. I was trying to figure out why my game was having sound issues when I was told to update my sound drivers. After a bit of searching, I came across this website. I downloaded and ran the script in the first link. Minor problem: I was using PulseAudio, not ALSA. Needless to say, the script didn't work. After the machine rebooted, I had no sound at all. I was planning on switching to ALSA anyway, so I found this thread and ran the following commands:
[Code]....
I have been experiencing this peculiar issue with Ubuntu 9.10. Whenever the system boots, the audio doesn't work but when I do a 'sudo alsa force-reload', the volume icon gets muted and on unmuting it the audio works. This is the information regarding the audio device I get on doing lspci
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
I'm trying to use a webtv subscribtion on ubuntu kermic, however it seems that that vlc dosnt support wmap yet, so i'm not getting any sounds on it. Does anyone have a clue on how to get this fixed, or if its even possible to get it fixed? I've tried searching guides for it without anyluck. And when i'm trying to set it to use gmplayer or totem it dosn't work either, mplayer and totem dosnt get either picture or sound.
View 5 Replies View RelatedI borked my perfectly good 11.2 install, while replacing a failing hard drive. I reinstalled, and now my sound doesn't work - or not quite. I get the left front channel, nothing else. Battle Duel crashes due to sound errors - or I probably wouldn't care.
[Code]....
Since I was change my mainboard and sound chip of course kmix doesn't work, I can change the volume but it doesn't effect on output volume it look like kmix have 3 level, Mute, Low and high.
View 9 Replies View RelatedI was just using the mic and watched it stop working suddenly. I was in the middle of a skype test call when the graphical mixer level died down to zero in the middle of the call. When the test call was played back, the first part sounded fine then the sound got lower until it became inaudible. Since then I can't get any sound from my mic in skype.
Also, the audio input level graphically shown in Sound Preferences shows no fluctuations in sound as it used to before. The input device is enabled. I tried using Sound Recorder to record some sound clips and that worked fine. So the mic is working but Sound Preferences and Skype seem to have the mic level really low. I'm not sure what else to think considering it was working perfectly a few minutes ago. I've tried restarting, but that didn't fix it either.
trying to get everything set up in Debian lenny on my new Toshiba staellite L500. I have successfully installed the wireless drivers and graphics card and have them both up and running. But I'm having trouble with the sound card. Specifically, it appears to be installed but I cant get any sound or any devices related to sound (speakers, volume control, alsamixer) to work at all.
this is my kernel:
uname -r
2.6.26-2-686
and this is the result of lspci:
00:00.0 Host bridge: Intel Corporation Device 0044 (rev 02)
00:01.0 PCI bridge: Intel Corporation Device 0045 (rev 02)
00:16.0 Communication controller: Intel Corporation Ibex Peak HECI Controller (rev 06)
[code]...
In ubuntu 10.04 my X-fi Fatal1ty Titanium sound card worked for my speakers but I had to use onboard sound for the mic. When I installed 10.10 the sound card no longer works at all so I have to run the speakers through the onboard sound.
The second problem I have is that Skype will not pick up my microphone all other programs seem to be able to record from the microphone just fine but skype does not. Ive tried selecting all the different input device options from the skype settings but none of them seem to work.
EDIT: Sound doesn't work at all in wine.
EDIT2: The X-fi card no longer shows up in the sound control panel.
trying to get ALSA running on a mainboard with onboard Intel soundchip using the snd-hda-intel driver. aplay detects no devices and amixer says: "Mixer attach default error: No such file or directory". Tried everything from the ALSA troubleshooting manual but no success... why is the card not recognized?Here is the output of a debug script I found. Up to now I just did "configure;make;make install" with alsa-utils, alsa-lib and alsa-driver...
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.59
!!################################
[code]....
My intel pro wireless 2200 NIC doesn't work anymore. Yesterday it did, but not today (I didn't do anything special, so that it could go wrong).What is ucode and -62? Any ideas? I already checked the forums and found that ipw doesn't work when ndiswrapper is loaded. Well, I don't have it loaded. What happend?
View 8 Replies View Relatedchanged my computer to PC with intel motherboard and Pentium IV the problems with wifi started. OS (Linux and Windows) see the device, connects with netwoks, but it is impossible to surf the net or even ping my gate (over 90% packets lost). I have tested it with Debian Leny, Ubuntu 7.1 and 9.04, OpenSuSE 11 and Windows XP, I have tried several drivers, changing slot.
View 2 Replies View RelatedI just got Ubuntu 10.04 installed and I seem to be having a problem as many others with the sound. because a laptop with no sound tends to be a wee bit boring
Code:
I just got installed ubuntu 10.04 in my HP laptop. But there is no sound in my speaker??
View 1 Replies View RelatedI have a strange problem with my audio on Linux. Some months ago I bought a new laptop (an Asus M51Vseries (M/B version M51Vr)), and now I want to install Linux on it. However, there are some problems. When I first booted up my newly installed Linux distro, Debian Lenny (kernel 2.6.26-1-686), I had sound when I tried to play movies, mp3s, etc. However, after next boot, the sound had disappeared. Nothing came out of the speakers even though everything had worked before. Nothing had changed in the mixers as far as I can tell, either. So I googled a lot and came about pages telling me I should edit /etc/modprobe.d/alsa-base and passing on a model option. Unfortunately it didn't work. I then put off the project a while, and yesterday I tried installing Linux again. Magically, sound worked again, and after rebooting, it had gone. I am at my wit's end.
When I think about it, I find it strange that sound that HAD worked, should stop working, and then start working again by passing a model=... (I tried several) in alsa-base.According to alsamixer (and yes, all channels are at the highest volume level, NOT muted), the chip is a Realtek ALC663. The Alsa version is 1.0.16.I hope you are able to help me. I really want to get rid of Windows, but I won't accept not having sound.
I am running Ubuntu 10.04 with an Intel 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller, and no sound output. I have both pulseaudio and ALSA installed. I have already checked with
Code:
alsamixer
that my sound isnt muted and aplay -l outputs this
Code:
xxxx@xxxx-ubuntu:~$ aplay -l
[Code]...
My laptop's internal microphone doesn't work. I ran alsa-info.sh to collect data about my configuration.
Code:
Since the full info dump was a little bit too big to post here, I put the file in its entirety on Pastebin. I also noticed that KMix doesn't display any inputs/outputs...
Wireless networking doesn't seem to work. When I try to create a new network interface with system-config-network, my wireless card doesn't show up. The following comes from dmesg:
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
[Code]...
I saw a post about this elsewhere and downloaded some firmware drives from [URL] and installed then. But, I'm really out of my league when it comes to this kind of stuff.