I updated my laptop to 10.04 earlier today and it worked fine but it was being a bit glitchy so i rebooted my laptop and it worked fine until it showed an error saying "cannot reserve MMIO region".
View 9 RepliesThat's the message I see briefly right before I am booted into Ubuntu Meerkat. It's right after the boot menu and the boot into Ubuntu begins and the screen is still black when that message appears.
View 2 Replies View RelatedWhat's up with this log message?
shpchp 0000:00:01.0: Cannot reserve MMIO region
After grub loads I get a flashing cursor then I get this message on the screen.
This is what I found in dmesg:
shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 0 ss_did 0
shpchp 0000:00:01.0: Cannot reserve MMIO region
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
I'm running an AMD laptop With Lucid x86_64, a custom install I did off the alternate iso with onlyLXDE installed.
All my hardware works fine and this just seems like some sort of bug.
Is there anyway I can silence all kernel messages at bootup?
This is what I have in /etc/default/grub and it's not working to silence it.
GRUB_CMDLINE_LINUX_DEFAULT="loglevel=0 splash"
When i boot i get an error saying cannot reserve mmio region. It does not seen to affect anything,
View 2 Replies View RelatedBefore creating a DVD of an old movie, I tried to free up some hard disk space by burning a batch of old cartoons (Betty Boop, from the '30s.) to a data DVD, and deleting the directory after making sure the burn was good. The burn went fine, and the disc ejected correctly. (This is an important point!) I immediately re-inserted it so that I could check the contents, as I've done many times before, but it never showed up on my desktop.
(F10 with Gnome) I opened Nautilus and found two copies of the DVD listed, and both context menus listed both Mount and Eject, as though Gnome wasn't sure if it was or wasn't mounted. Checking, neither shows up in /media, /mnt or /etc/mtab. At this point, I can no longer mount it or any other disc. I've tried logging out and logging in, with no change. I'd consider a reboot, but my uptime has quite literally reached Biblical proportions and I hate to waste it if I don't have to. How to tell Fedora to let go of a DVD that isn't in the drive any longer?
I had screwed up a unsolvable Ubuntu install, so I had to reformat and reinstall. I did all that, installed my apps, but then saw and was convinced to upgrade to 10.10. It took forever, but it downloaded and installed the upgrade package. Since then, I have had a few issues that I had never had in 10.04. The other ones are in their own threads though. So, now when I either close my laptop lid or hit suspend, I can see it do some things, then either A. It goes to sleep. Or B. It just freezes.
No HDD activity, just those messages it displayed for suspending like it does when it works. I have screenshots attached of that. Also, in the default applet that provides you with the sleep option and shut-down, etc, sometimes the option Hibernate disapears. Now, I have seen how the menu is without it and like it that way. I think I need to be looking for a prefrence file for it, because I would like the option Hibernate to be removed from that menu.
1. How can I get the machine to go to sleep properly? This is mainly because I hate loosing what I am doing.
2. How do I remove the option "Hibernate" from Indicator Applet Session 0.4.6?
I installed Ubuntu 11.04 and then I installed WICD using Synaptic and then uninstalled Network Manager. WICD worked fine until I rebooted. Then I could not connect at all. Wicd displayed the wireless lans and even authenticated OK. But wicd was not able to obtain an IP address.
View 1 Replies View RelatedI have just installed Debian 5 and KDE. All works fine. I wanted to add in a 200GB IDE drive and all worked fine except when I use Konqueror to look at the drive contents it is unmounted. I can mount it o.k., but my question is:
Where do I put the mount command so that the drive mounts at startup? Do I have to set permissions as well and if so can i do this so that the drive is r/w accessible to me as a non root user? My system is just a desktop machine running Openoffice and Internet access.
I have a Z_Star webcam, which used to work perfectly well with OpenSUSE 11.3. At some time after updating to 11.4 (Tumbleweed, in fact) the device wasn't recognized any longer. Skype and Kopete both show that I have no available webcam device. The lsusb command (see below) shows the camera is there. What am I missing?
Code:
> lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code].....
In Installed Fedora and the network did not mount or establish a connection. I installed and uninstalled over the last three days, ClearOS, Ubuntu, OpenSUSE all packages installed the network with any issues. I am looking at the best solution for Kannel/Mbuni for MMSC and WAP services.I want to build our own system -Grass Roots andlearn and grow from there.I am right now recuseing the network connection(selected) from the bootdisk ISO and rebooting the system. The network connection Fail again. NetworkManger has - "This Service is Dead"I am a newbie with Linux, I have some on-hands and I am learning as I go. Lots of material to read and FAQ site, and this forum,
View 2 Replies View RelatedI am running Mandriva Linux 2010.
It works beautifully.
Now I am running into problems with some websites; they complain the Adobe Flash Player is old.
It suggested downloading.
I obliged to them and downloaded. Everything worked fine.
However, those website still complains about an old Adobe Flash Player.
I just followed the instructions and installed it. Please read the following:
I am doing an online VMware certification course as a part of my education. I can't do it because of this prroblem. It complains about an old Flash Player.
I have a whitebox server with three network adapters, two gigabit adapters using the intel 82573V chips, and an intel pro/100 adapter based on the 82562 chip. These are embedded on an MSI motherboard. None are passing traffic.I initially booted the box using a Knoppix 5.0.1 CD, and the NICs worked fine. When I installed CentOS 5.4, no joy.Interestingly, Intel recommends the e1000e driver (which I am using), but the Knoppix CD used the e1000 driver. Anyway, I pulled an updated e1000e driver from elrepo,installed it, and verified that it was in use with 'ethtool --driver eth2', and the correct driver/version was displayed.
Symptoms are no traffic passes, rx/tx packet counts in ifconfig are both 0 (no errors, either). Routing table looks fine; three routes: one for 169.x.x.x, 172.16.x.x (my subnet), and one for 0.0.0.0, all destined for eth2, and all up. When I ping 127.0.0.1, and the local adapter address, I get good replies. As soon as I ping a remote host on my subnet, I get 'Destination host unreachable'. Now, at one point, I actually got it to work. I applied a small patch from Intel to change a value in the EEPROM, rebooted as instructed, and the adapter came up and passed traffic. I did a 'yum update' to update my packages, and shortly thereafter, everything stopped working again.
I have been running FC8 on this IBM T23 with a D-Link wireless adapter. Using MadWifi this has worked fine with Network Manager disabled. But now I have nuked that installation and replaced it with FC10. Network Manager is nice, and I would like to use it. And it kind-of works. Network Manager recognizes my router and all my neighbor's routers, but I can't connect.
[Code]....
I have a new Dell XPS 9100 with 9GB ram and ATI Radeon HD 5770 1024MB GDDR5. I installed a dual boot with Windows 7 and Ubuntu 64bit. Sound worked fine withthe Windows 7, but no sound with Ubuntu. Did a reinstall with just Ubuntu 64 bit (wiping out the Windows 7). No sound.I first did:
System -> Administration->System Testing
(testing only for sound). I get:
0 [Intel ]: HDA-Intel - HDA Intel
[code]....
I'm a recently proud owner of a new Aspire AS3810T with Fedora 12 installed, when it boots up before entering the boot screen when it loads I see this error message:IOMMU: Mapping reserved region failedHow can i fix this error? It's quite frustrating
View 2 Replies View Relatedwhat i can to do?[URL]Error: Cannot retrieve repository metadata (repomd.xml) for repository: chromium. Please verify its path and try again
View 2 Replies View RelatedI installed ubuntu with the windows installer. while installing in windows, multiple error messages showed up, but installation still proceeded.it rebooted, and ubuntu finished installation.on the next reboot,when i chose ubuntu from the windows boot manager, it loaded grub.however,there was no option for booting ubuntu in grub, and you are forced to go back to the windows boot manager.
View 2 Replies View RelatedI installed Matlab in Ubuntu 10.10. I was able to get it running and I saw the initializing screen. However it showed me an error with OpenGL
"warning : could not query OpenGL"
and it freezes there. I tried many things to get over with it and it didn't work.
for some reason my first updating was interrupted and from then i cannot update. i get the following message:
rpmdb: PANIC: fatal region error detected; run recovery
error: db3 error(-30974) from dbenv->open: DB_RUNRECOVERY: Fatal error, run database recovery
error: cannot open Packages index using db3 - (-30974)
error: cannot open Packages database in /var/lib/rpm
CRITICAL:yum.main:
Error: rpmdb open failed
[root@laptop etc]# yum repolist
[Code]....
When I deleted uninstalling and installing some packages in Yast2 I got this output:
Deleting mc
Additional rpm output:
rpmdb: PANIC: Invalid argument
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30977) from dbcursor->c_put: DB_RUNRECOVERY: Fatal error, run database recovery
error: error(-30977) storing record "4.0-1" into Requireversion
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30977) from dbcursor->c_get: DB_RUNRECOVERY: Fatal error, run database recovery
error: error(-30977) setting "3.0.4-1" records from Requireversion index
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30977) from dbcursor->c_get: DB_RUNRECOVERY: Fatal error, run database recovery
error: error(-30977) setting "" records from Requireversion index
and on and on for 3 pages for every package.
I am getting an error from yum update and Kpackagekit:
[root@asus-m4n82 tylerm]# yum update
Loaded plugins: refresh-packagekit
Setting up Update Process
rpmdb: page 18816: illegal page type or format
[code]....
How do I "run recovery"? Edit: Ok so it looks like I had som bad ram in my system that caused this - I found a site that told me to do this:
rm -f /var/lib/rpm/__db*
rpm rebuilddb
yum clean all
I did this but now when I try something like yum install firefox it pulls in a ton of already installed packages.
I have some problems with CentOS 5.4 and standard kernel 2.6.32.7, which I need for realtime extensions.With the solution in this thread: [URL] I could boot the new standard kernel , There are still two error messages during the boot process:
"insmod: error inserting /lib/dm-region-hash.ko -1 fikle exists"
and a problem with ip-tables "could not restore ip-tables line 20" or so
I have a code that does 3D rendering that worked on a system running RHEL4 32-bit with an NVIDIA GeForce 260 video card. I have a new system now running RHEL5 64-bit (The shared object libraries for the code are 32-bit) with an NVIDIA GeForce 295 video card that when I execute the code I receive the following error:
BadMatch (invalid parameter attributes)
Major opcode of failed request: 143 (GLX)
Minor opcode of failed request: 5 (X_GLXMakeCurrent)
Serial number of failed request: 26
Current serial number in output stream: 26
Can anyone give me any ideas on what could be causing this error? This really isn't my area of expertise unfortunately. I'm not the author of the code. Could I be missing some libraries or something along those lines? Let me know if you need me to post up more information.
I have 10.04 installed and Update Manager has worked fine for months, until about 2 weeks ago. When I ask Update Manager to update its indexes, I get this error message returned almost immediately
"Method http has died unexpectedly!
Sub-process http returned an error code (127)
Method http has died unexpectedly!
Sub-process http returned an error code (127)
The internet connection is working fine on this machine. I have another 10.04 machine sitting right next to the problem computer, and Update Manager works fine on that machine. I verified that all settings are the same between the 2 machines in these areas
1. All Update Manager SETTINGS (including SOFTWARE SOURCES)
2. System -> Preferences -> NETWORK PROXY (which is a Direct Internet Connection)
3. System -> Preferences -> NETWORK CONNECTION
It appears to me that the connection to Ubuntu repositories is failing but I can't find anything different between the 2 machines.
Title : AGK(Auto Gordian Knot)
Auto Gordian Knot]
*****************
input file=C:*MEAD*AAMOV4.avi
external file=C:*MEAD*AAMOV4.srt
output file=C:MEADAAMOV4_agk.av
[Code]....
The "AAMOV4.avi" file and the "AAMOV4.srt" file worked fine in "MEDIA PLAYER".
looking for linux (ubuntu) software for converting region 1 dvd to region 2
View 14 Replies View Relatedi installed the new beta 10.04 and it seemed right after the install and update that both nvidia hardware drivers were automatically install together. i deactivated both drivers. one driver showed the nvidia 173 driver and the other one showed "current" nvidia driver.
after a restart i then tried to activate the 173 driver. system required a restart. so i did. system booted to a black screen. i believe its at the desktop but i am unable to see it. i tried to hit esc at the boot screen to enter the grub menu but that didnt work.
have set up a server with OS on a 250GB disk (sdd) and 3x 1.5TB drives for a RAID5 storage setup (sda, sdb and sdc).Using webmin I can delete and create a primary partition in each one. But while I can also format sda and sdc, it refuses to do sdb for some reason:Executing command mkfs -t ext4 /dev/sdb1 ; partprobe ..mke2fs 1.41.11 (14-Mar-2010)
/dev/sdb1 is apparently in use by the system; will not make a filesystem here!
But I'm not using it
simon@ubuntu:~$ lsof | grep /dev/sdb
simon@ubuntu:~$ lsof | grep /dev/sdb1
[code]....
I run a few programs that are very resource intensive, and although my computer has 4 cores, it keeps "freezing": it still works, I can see that my downloads keep on going, it's just too slow to show me a terminal screen so that I can kill whatever program got out of line.
It may be a bit complicated, but I suppose that there should be a way to do it: how can I keep some "cpu usage" from being used? I don't know, maybe reserve a core for management? Or throw the problematic programs in a "box" of limited processing power?
I'm sorry if this is a really dumb question, I'm a bit of a noob, but that would help me a lot. Of course, if someone has a better suggestion for my problem, I'd appreciate it very much.
so the problem is that when I try to install anything with Software Center I get this error
Code:
installArchives() failed: Selecting previously deselected package alarm-clock-applet.
(Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading
[code]....