Ubuntu :: Shpchp 0000:00:01.0 - Cannot Reserve MMIO Region ?
May 7, 2010
What's up with this log message?
shpchp 0000:00:01.0: Cannot reserve MMIO region
After grub loads I get a flashing cursor then I get this message on the screen.
This is what I found in dmesg:
shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 0 ss_did 0
shpchp 0000:00:01.0: Cannot reserve MMIO region
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
I'm running an AMD laptop With Lucid x86_64, a custom install I did off the alternate iso with onlyLXDE installed.
All my hardware works fine and this just seems like some sort of bug.
Is there anyway I can silence all kernel messages at bootup?
This is what I have in /etc/default/grub and it's not working to silence it.
GRUB_CMDLINE_LINUX_DEFAULT="loglevel=0 splash"
View 9 Replies
ADVERTISEMENT
Nov 21, 2010
That's the message I see briefly right before I am booted into Ubuntu Meerkat. It's right after the boot menu and the boot into Ubuntu begins and the screen is still black when that message appears.
View 2 Replies
View Related
Jan 14, 2011
When i boot i get an error saying cannot reserve mmio region. It does not seen to affect anything,
View 2 Replies
View Related
May 10, 2010
I updated my laptop to 10.04 earlier today and it worked fine but it was being a bit glitchy so i rebooted my laptop and it worked fine until it showed an error saying "cannot reserve MMIO region".
View 9 Replies
View Related
Nov 7, 2010
I have random X freezes (suddenly keyboard and mouse stop to react). Xorg.O.log is error and warnings free. The only problems I see in syslog/ dmesg are related to ACPI.
I have Asus P5E3 Deluxe motherboard. Slackware 13.1
Linux vareg 2.6.33.4-smp #2 SMP Wed May 12 22:47:36 CDT 2010 i686 Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz GenuineIntel GNU/Linux
Code:
Code:
I ahve also today upgraded my BIOS to 1303 version. Still no difference.
View 14 Replies
View Related
Nov 5, 2010
looking for linux (ubuntu) software for converting region 1 dvd to region 2
View 14 Replies
View Related
Jun 24, 2011
I run a few programs that are very resource intensive, and although my computer has 4 cores, it keeps "freezing": it still works, I can see that my downloads keep on going, it's just too slow to show me a terminal screen so that I can kill whatever program got out of line.
It may be a bit complicated, but I suppose that there should be a way to do it: how can I keep some "cpu usage" from being used? I don't know, maybe reserve a core for management? Or throw the problematic programs in a "box" of limited processing power?
I'm sorry if this is a really dumb question, I'm a bit of a noob, but that would help me a lot. Of course, if someone has a better suggestion for my problem, I'd appreciate it very much.
View 3 Replies
View Related
Mar 5, 2011
In gparted I have the following stats for my /home drive
size: 824 gb
used 75.51 gb
unused 748.59 gb
Now when I view this in nautilus it shows something else: remaining free space as 709 gb. My question is what happened to the 40gbs? the 75.51gb are my files, but where did the 40gbs go to? Because 709 (total remaining) + 75 (my files) + 40 (mysteriously lost gbs) = 824gb. When I first made the partiton, it was a 824gb partition and ubuntu had automatically at that point reserved about 40gb for something. Does anyone know why Ubuntu reserved this space?
View 4 Replies
View Related
Jan 25, 2011
Can ubuntu be configured to reserve more bandwidth for some domains at the expense of others?
Eg you are browsing facebook and data comes faster than on a tab where you are browsing ......
View 5 Replies
View Related
Jun 17, 2010
I have several environments in which I am using Thin Clients as terminal emulators to Red Hat servers. I have been deploying Thin Clients for the past few years to replace old WYSE dumb terminals. One problem I am having is that the dumb terminals were serial so they were on a specific tty port. The Thin Clients however connect on the first available pts port, I really don't have control over the port each Thin Client connects on, other then possibly making sure they are always started in a certain order, which isn't a feasible option. What I am wondering is if anyone knows a way to control which pts port a thin client connects on; I'm guessing it would have to be by hostname or IP, I just can't figure out how.
View 1 Replies
View Related
Sep 13, 2015
I'm trying to install plymouth on my Debian 8.2 Jessie (Stable), but when I boot my pc I get this error:
Code: Select alluvesafb: cannot reserve video memory at 0xdf000000
This is my configuration:
Code: Select allcat /etc/default/grub
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
[Code] ....
View 0 Replies
View Related
Mar 14, 2011
I am somewhat familiar with SGE (Sun Grid Engine, now Oracle Grid Engine) commands but am having a problem when running parallel jobs.
Present Machine configuration:
machine I - 12 cpus
machine II - 12 cpus
machine III - 12 cpus
.... so on ...
One_machine - 16 cpus
(I have all machine of 12 cpus and 1 machine having 16 cpus)
I want to schedule jobs on these machine such that if I ask for 12 cpus - my jobs should execute on any of the machines which has all 12 free cpus (eg machine I or machine II) in this case.
Eg. suppose I ask for 24 cpus
Option I : 12@machine1 12@machine2 ----- I need this
Options II : 10@machin1 10@machine2 4@machine3 ---- I don't need such a distribution
Hence, Option I is ideal here. Also, when running 12 jobs on machine1 (say) - even if all 12 cpus are not being used at some instance of time, none of the 12 cpus should be freed.
In short, until my run finishes, all blocked cpus should remain blocked.
If you may understand, the purpose here is to run some performance tests.
I'm using 'qrsh' to launch jobs.
View 1 Replies
View Related
Feb 25, 2010
Lots of these in my dmesg, dont like that. Don't think it should be there. Don't know how to get rid of it. What i do know is:
It's intel graphic card related on Ubuntu 9.10 2.6.31-20-generic #57-Ubuntu SMP Mon Feb 8 09:05:19 UTC 2010 i686 GNU/Linux On a EEEPC 1000H
View 5 Replies
View Related
Apr 2, 2011
I realized I can watch DVDs on my laptop. I tried the first DVD that I had tried it on, and it didn't work. I am thinking this may be something to do with region codes. First of all, how do I see which region code I am currently on? Secondly, how do I reset the region code? Is there any way to use multiple region codes at once?
View 9 Replies
View Related
May 7, 2011
I'm using a slack 13.37 version and this message is occuring during wine apps running:
preloader: Warning: failed to reserve range 00010000-00110000
Instead of being only a warning, I think it's breaking down and don't know exactly it's a wine or OS problem.
Googling point me a wine problem,
url
and another Ubuntu and Wine topics .
url
url
But I'm in a 32bits option ( no multilibs ), my wine, dependencies packages and procedures are the same installed before in 13.1 . Just system was changed! Anyone have any info on that sytem or wine problem?
View 6 Replies
View Related
Jan 25, 2010
Please see below:
vim ~/.bashrc
umask=0000(bottom line)
source ~/.bashrc
But when I relogin, default umask was still 0022. How could I do ?
View 1 Replies
View Related
Nov 11, 2010
I write the below sample program named "h1.asm"?
Code:
assume cs:code
code segment
mov ax,0B800H
[code]...
1. In Windows platform +MASM 5.0, run "command" and use "debug.exe" to see what would happen. As step by step check, I see B800:000 is not modified as expected.
2. In Ubuntu 10.04 + dosemu 1.4.0.1, run the program in two ways:
a. If exec dosemu in command line as "$dosemu -dumb", yes, it's in shell mode. and then use debug to check, "B800:0000" can be modified as expected.
Code:
"Welcome to dosemu 1.4.0.1!"
D:masm>debug h1.exe
-r
AX=0000 BX=0000 CX=000F DX=0000 SP=0000 BP=0000 SI=0000 DI=0000
[code]....
b. If exec dosemu in command line as "$dosemu", and run the program again, the symptom is as same as 1.(pls see attachment picture).
3. In Windows, I replace "mov ax,0B800H" to "mov ax,2000H" and try again, it would be edited well. So I wonder if it is coursed by "B800" segment address.
View 5 Replies
View Related
May 4, 2011
Hi, I usually use Debian which doesn't have this bug, so I hope Ubuntu users will not if this could be fixed.
Ubuntu version:
Ubuntu 10.04.1 LTS
kernel version: 2.6.32-24-generic
So problem is no matter what device I connect to USB, after some time in dmesg errors are generated which bring load of one core to 100%. These errors are generated in dmesg:
Code:
[325766.792025] ehci_hcd 0000:01:07.2: port 9 resume error -19
[325766.803033] hub 2-0:1.0: hub_port_status failed (err = -32)
[325766.814086] hub 2-0:1.0: over-current change on port 10
[325766.928027] ehci_hcd 0000:01:07.2: port 10 resume error -19
[code]....
I found solution for Ubuntu which says to get this working I should disable USB 2.0 which is not really acceptable for me.[URL]
View 5 Replies
View Related
Jun 20, 2010
I have this 17" Dell laptop, and the touchpad is huge. My family use it and when we're typing, we brush of this incredibly large touchpad and end up pumping characters into the middle of a prior paragraph.
They've reduced the size of the touchpad on the newer versions of this model, but I'm wondering is it possible to hack it somehow so the outer perimeter (say 1cm) is 'dead'?
Most configuration software available is of no use to me since I think it's not a synaptics mouse. (I don't have multitouch - that's why I think this)
This is really frustrating. Does anyone know how I can do this?
Code:
View 4 Replies
View Related
Aug 23, 2009
I just installed Fedora 11 on an AMD CPU PC. I get the following error during boot up.Aug 22 21:42:07 dragon8 kernel: aic7xxx: probe of 0000:00:0a.0 failed with error -38 Because the aic7xxx has the error, it does not load the st module. I manually loaded the st module, but the /dev/st? devices do not get created, I assume because of the aix7xxx error.I can access the Adaptec AHA-2940W Bios during boot up and see the 2 tape drives that are connected to it.
View 2 Replies
View Related
May 6, 2011
When I use mplayer (i.e. play a movie with it) the system will sporadically freeze completely, for around 13 seconds. Everything halts as if the system is having a kernel panic or worse -- even the clock halts. Around 13 seconds pass, everything returns to normal (the clock then jumps 13 seconds ahead, as well), and from the kernel pool log (dmesg) I observe this:
Code: NVRM: Xid (0000:02:00): 8, Channel 00000004 This seems to happen at sporadic time intervals, but can happen as often as every two minutes at "worst", making watching a movie clip the most annoying experience you can imagine.
I have tried to update the graphics drivers to the latest version, to no avail. I also have no idea how this issue started in the first place. I use Slackware 13.1.0 on a fast x86 (4.1 GHz Core i7, 6 GiB RAM, SSD, GTX480, etc.). There are no other known issues with the system. I don't use any sort of package managers or automatic updates. This issue happens regardless of whether the media played is physically local on the computer, or if it is on a network.
View 6 Replies
View Related
Nov 23, 2010
i just upgraded to 10.10 thru update manager, had problems upgrading, had to disable Nvidia - nouveau to upgrade and everything went well for 5 days but then i disabled backports in software sources then i changed visual affect from normal to extra and turned computer off. NOW i cant use ubuntu it just freezes on the purple ubuntu screen prior to login.have tried using safe mode and repair broken packages, which did a 21mb update but still nothing but freeze. i get this message in safe mode
23.4618531 [drm] nouveau 0000:01:00:0: couldn't find matching script table
24.514673 " "
24.514696 " "
24.752897" "
i can follow terminal commands BUT thats all i dunno how to use terminal by myself
View 1 Replies
View Related
Jan 11, 2010
My laptop is having issues with DVD's. I can play region free DVD's (they were gifts), but I can't play any of my legit Region 1 DVD's? I downloaded the codecs from the software center but for whatever reason, They don't work, both Mplayer and Movie player just give me error messages when I load the disks. I know the disks are being read, their name pops up and everything, but I guess it just cant read the files.
View 9 Replies
View Related
Jul 11, 2010
I know I can use things like regionset and VLC to bypass region encoding (which I already do), I was really wondering if you can actually purchase a drive that is "region free" without having to apply hacks/ patches/ voodoo etc.I've done the "google thing" and all I come up with is hacks while using windows, I'd really like to get a drive that is completely region free.
View 1 Replies
View Related
Mar 2, 2011
OS:Debian Linux 2.6.32-5-amd64 Should i need to worry about these error messages? If 'Yes', how to check and fix? When it boot,
/var/log/syslog
Mar 2 23:29:03 ipb167 kernel: [ 1.465629] PM: Error -22 checking image file
Mar 2 23:29:03 ipb167 kernel: [ 4.110123] amd64_edac: probe of 0000:00:18.2 failed
[code]....
View 2 Replies
View Related
Sep 28, 2010
I get this access violation message when I try to run The Godfather in Wine.The Godfather is an audio file tagging and organization program. he message reads:
Exception EAccessViolation in module TheGodFather.exe at 00000000.
Access violation at address 00000000. Read of address 00000000.
The header says "Application Error" and my only option is an OK button which terminates the program. This is the output I get in the command line:
Code:
wine TheGodFather.exe
err:ole:CoGetClassObject class {00000514-0000-0010-8000-00aa006d2ea4} not registered
err:ole:create_server class {00000514-0000-0010-8000-00aa006d2ea4} not registered
err:ole:CoGetClassObject no class object {00000514-0000-0010-8000-00aa006d2ea4} could be created for context 0x5
[code].....
View 2 Replies
View Related
Jun 10, 2010
When using Docky and clicking the window minimize button the windows will randomly minimize to the cursor and not to the dock icon. Pressing the dock icon will work as expected. I have read through the Docky bug reports and it seems it has something to do with Docky and compiz losing the window minimize region.
View 2 Replies
View Related
Jun 2, 2010
I've just recently installed the latest version of fedora on my machine. I already had win7 64-bit so I did a dual boot with the Fedora live CD using the "use largest amount of free space option"(I had intentionally left 30GB of unallocated space). The problem though is that fedora just keeps_crashing, at any point and very randomly. I didn't have this problem with ubuntu. Fedora can crash right after I initiate the boot sequence, or it can wait until the booting process starts, or the login screens shows up, sometimes it even lets my use the OS but invariably crashes. I've done numerous hard reboots which only seemed to worsen the matter, now I can barely get past login screen. This issue also happened on the live CD, but with perseverance I got fedora running on my computer.
There's an error message that shows up for a second or two right before the boot sequence is initiated, luckily(!) the system crashed at the moment it was showing and I was able to write it down :
pci 0000:01:00.0 : no compatible bridge window for [mem 0xfffe0000-0xffffffff pre f]
Here are my specs:
Intel p965 chipset (i heard this one didn't work well in previous fedora releases, maybe this is the problem?)
4GB DDR2 Ram
nVidia 8600 GTS graphic card
HDA Intel Integrated Soundcard
Intel core 2 duo E6400 processor.
View 14 Replies
View Related
Dec 27, 2010
I have installed a fresh copy of FC14 and when I logged in locally for the first time I was getting the error messages below. Now these same messages are filling up my messages log and it's running non stop in the background. Has anyone seen anything on this error? I have searched through Google looking for help and I'm not finding much.
This box is a simple file/web server with no monitor hooked up and no GUI. I have also included the lspci ouput below if that might help. Really looking for any suggestions or input on how I might stop the error reporting since is filling up my log files quickly.
[Code]....
View 2 Replies
View Related
Apr 11, 2010
I have many DVDs that I purchased in Europe (Region 2) and I would like to copy them and change the region for easier reading here in North America (Region 1). In an ideal world, region 0 would be even better.k9copy works fine as far as copying, but the region is kept. I haven't found any setting in k9copy to change the region - is there one? If not, any other application that can do it?
View 9 Replies
View Related
