Ubuntu :: When Installed With MongoDB - Failed Loading?
Jan 8, 2011
I'm using Ubuntu x64 Desktop 10.10, when I installed XAMPP xampp-linux-1.7.3a.tar.gz and xampp-linux-devel-1.7.3a.tar.gz on my laptop.It's run perfect. But when i installed MongoDB extension on XAMPP and restart XAMPP it's show:
HTML Code:
Failed loading /opt/lampp/lib/php/extensions/no-debug-non-zts-20090626/mongo.so: /opt/lampp/lib/php/extensions/no-debug-non-zts-20090626/mongo.so: wrong ELF class: ELFCLASS64
I tried to install with /opt/lampp/bin/pecl install mongo but it's same error.
View 1 Replies
ADVERTISEMENT
Jun 7, 2015
I'm having trouble with mongodb on debian. I'll start from the scratch: removing it.
Code: Select allapt-get autoremove --purge mongodb
Or:
Code: Select allapt-get purge mongodb
Or:
Code: Select allapt-get remove --purge mongodb
All end in the same way:
Code: Select all dpkg: error processing package mongodb-org-server (--configure):
subprocess installed post-installation script returned error exit status 102
Errors were encountered while processing:
mongodb-org-server
E: Sub-process /usr/bin/dpkg returned an error code (1)
[Code] ....
View 1 Replies
View Related
Apr 28, 2010
I'm trying to install mongodb (so called schema-less database). It requires libraries like libjs, libmozjs, spider-monkey and the like. I had an idea that installing xulrunner would provide most of that, but it doesn't do so in any nice way. I'm a bit scared to muck up my firefox/thunderbird/seamonkey system, which I suspect might easily happen if I tread wrong.
View 3 Replies
View Related
Mar 27, 2011
I'm running Ubuntu 10.10 64bit, and I'm a newbie when it comes to networking.
My issue is that there seems to be a socket bound to a port blocking MongoDB from accessing it's usual port 27017. The strange thing that it was working just fine until recently and I can't figure out what I did to screw things up... I can make it use a different port but the reason why it can't bind to the default port and why I can't fix it is really bothering me. I've tried rebooting the machine even with nothing else running when I try to run Mongo is still blocked giving the following message:
Code:
ropes@ropes:~/mongodb-linux-x86_64-1.8.0/bin$ ./mongod
./mongod --help for help and startup options
Sun Mar 27 14:08:14 [initandlisten] MongoDB starting : pid=2718 port=27017 dbpath=/data/db/ 64-bit
[Code]....
View 5 Replies
View Related
Nov 19, 2010
I have installed LAMP server in ubuntu 10.04 using sudo tasksel command @ my home and with all the port forwarding and stuff its working fine and i can access it via internet and images load fine, but when i installed LAMP using same exact same command @ my friends place and proper network configs, the php pages load but the images don't load. (Images which are very small in size like less then 5 kb is loading though, like small icons, smileys...)Tried clearing cache, different browsers, different image formats.
View 2 Replies
View Related
Feb 5, 2011
I installed CentOS on an HP server with 5i RAID controller (so it's hardware RAID) and installed GRUB to the MBR. However, it boots straight to Windows XP without seeing the GRUB loader at all.
Configuration is this.
Windows installed on RAID0 drive
CentOS installed on a separate RAID0
Windows fileshare on RAID5
I'm guessing that since the RAID controller doesn't "see" separate drives in each array, that I'll need to do some "fudging" to get it to work, like maybe using Windows' pathetic loader to load GRUB and go from there, but I have no idea how. Do I have to make the drive "seeable" by Windows first by assigning it a drive letter under Windows Disk Manager, and then add it to the bootloader ini file?
View 5 Replies
View Related
Apr 30, 2011
I have been doing some research on problems I have been having and I have narrows Compiz down to being the problem. I am running the prop Nvidea driver. I can use Unity 2d fine however I cannot use Unity at all I just get a blank screen with the mouse cursor no desktop ever loads. I have tried switching between gdm and kdm. I have now worked out that compiz looks like the problem. If I issue a compiz --replace at the terminal I get the same sort of problem I get when I log into the Unity 3d. I loose my left hand monitor (it goes black but I can move my mouse around) and on my right hand monitor I can operate things using the keyboard but when you click with the mouse it does not work although you can move it around fine. Never used Compiz and I dont know if anyone knows any troubleshooting I can try I have exhausted what I could find on the Internet (A few exports of global variables but none fixed anything).
View 1 Replies
View Related
Jan 27, 2010
I recently upgraded from Hardy to 9.10 Kubuntu. The install went smoothly, and when I boot up, the loading screen (the one with the progress bar) does its thing. Then I see the 'waiting' cursor (in Kubuntu, the two dots chasing each other around in a circle). I see this for about two to three seconds, then the entire thing freezes up and I can't do anything, including switching to a virtual console. How do I figure out my system's dying words so I can figure out what's going wrong? As a (sort of) aside, when I open files in /var/log for reading with cat <file> | less, I have to Page-Down a whole bunch to get to the most recent stuff. Is there a way to jump to the bottom, or read with something other than what I have been using?
View 1 Replies
View Related
Oct 28, 2009
While loading a rpm package its showing error of failed dependencies so wat to do for dat pls guide me
n in another case its showing cant create transaction lock on /var/lib/rpm/_db.000
View 1 Replies
View Related
Jan 14, 2009
I have installed fedora core 9 with a successful installment but the GRUB is not loading Vista BOOT MGR is Missing root chain loader +1. Booting Other does not load.
View 14 Replies
View Related
Nov 3, 2010
I've installed CentOS lot's of times, but I've never had an issue like this before. It's just a black screen, and all I see is a mouse. I see some drive activity, but I gave it a good hour and it's just sitting there. Not sure what to do here or what's causing the issue. There were no problems during the install. I'm trying to install it on an old Dell PowerEdge 1900 server. Edit: If I go to the console, top is showing X and gdm taking 10+% of the CPU and there's a high load. Which is odd because this is a fresh install..
View 3 Replies
View Related
May 17, 2011
I've installed Ubuntu 11.04 Natty Narwhal on a External HDD (320GB Samsung S2). Worked like a charm. Bit slow to boot up and load programs, but after a while, works great. I installed it on the external HDD for one purpose: Work anywhere with Ubuntu, no matter which computer I use. I was thinking that was impossible, but I've tested thru several platforms (3 Notebooks, 2 netbooks, all Intel and one AMD Desktop). All worked flawlessly (32 Bits PAE activated and no matter how many cores are active, just works), BUT the themes.For no apparent reason, themes works on the computer I've installed Ubuntu on the HDD. It has his own Internal HDD with Windows 7 and two NTFS partitions.
Themes are stuck to the default boring-white from Gnome. I can only change the window controls. Compiz works, Wireless works, video works, sound works, filesystem works, system works - themes fail. Feels like I've hit my feet's little finger on a chair. P.S.: Ext. HDD is partitioned like this: 300GB FAT32 (it's my pop's HDD, he wants it this way), 18GB EXT4, 2GB Swap.
[Code]...
View 1 Replies
View Related
Jun 3, 2009
I have a strange IDE device that isnt recognized during boot, so I installed via network but after the installation the DVDROm Drive is still not recognized. I found some floppy images with the driver but dont know how to install them:
[URL]
View 1 Replies
View Related
Dec 5, 2009
To upgrade my system from 11.1 to 11.2, I followed he instructions at:openSUSE Lizards � Updating in Place From openSUSE 11.1 to 11.2
However, it failed and now I am stuck with this error:
Code:
zypper: error while loading shared libraries: libaugeas.so.0 cannot open shared object file: No such file or directory
View 9 Replies
View Related
May 19, 2010
Trying to get Eudora 8 installed in 10.04, but when I follow the Eudora instructions it fails. Here they are: The README file instructs thusly:
1. After downloading the file, open up a terminal window.
2. In the terminal window type in the following:
sudo tar -C /opt -xvf <place where you downloaded the file> (I assume they mean /home/pan/Downloads/. When I tried this, I put in sudo tar -C opt -xvf /home/pan/Eudora-8.0b9.en-US.linux-i686.tar.bz2. Fail.
tar: Record size = 8 blocks
tar: opt: Cannot chdir: No such file or directory
tar: Error is not recoverable: exiting now)
3. Then create a link for easy execution by typing: sudo ln -s /opt/eudora/eudora /usr/local/bin/eudora
4. After installation is complete, we recommend that you read the README.txt file (this file) in /opt/eudora.
5. You will then be able to run Eudora from any command prompt by just typing in "eudora" (no quotes). If I can get past part 2 i am sure I am ok. Ideas what I am doing wrong?
View 1 Replies
View Related
Dec 22, 2010
I installed teamviewer and immediately skype went offline. Upon logging in to skype I get the following error:
"skype p2p connect failed"
So I rebooted pc, router, performed the command: "rm -rf ~/.Skype" to no avail. Next I removed teamviewer and tried everything again & still the message persists. Skype was set to not use port 80 already, but if it won't log on then I can't get to full the options menu.
View 4 Replies
View Related
Oct 18, 2010
Recently i was about to installing skype, for that i have to check the repostory in the software Source...after that it shows me the message for Reload and then it starts Downloading but at the last it shows me the message "Some index files failed to download, they have been ignored, or old ones used instead.
"
View 7 Replies
View Related
Jun 4, 2010
When I try to install Kubuntu 10.04 from the live CD (ran the installer from the Live Desktop) I get this error:
I then get sent back to the partitioner after clicking continue. Nothing but the installer/live desktop is using the cdrom. How do I install it? I have also tried running the installer without the live desktop, and it still throws the same error at me.
View 4 Replies
View Related
Aug 30, 2011
To the point:F15 2.6.40.3-0.f15.i686.PAE (from grub) running on a Lattitude D620Encrypted lvmThe last things I did before restarting, was to install ext2fuse, VMWare Player and then yum update.I can mount (on another F14 machine) both the boot partition and the LVM , fsck -f does not find anything on /boot or /.Escaping the plymouth screen during boot, I see:
Code:
...
Starting Initialize storage subsystems (RAID, LVM, etc.)...
[code]....
View 2 Replies
View Related
Apr 9, 2010
I've a folder named "lynx" in my desktop . It contains ebooks - pdfs,chms etc . The problem is sometimes when i open the folder in nautilus , the folder keep loading forever and sometimes it shows two or three files and keep on loading . But at some other times , folder contents are displayed just as any other folder(i.e normal ).
View 5 Replies
View Related
Oct 27, 2010
Ubuntu 10.04 not loading. Sticks at GRUB Loading message.
Read the other threads re OS not loading and GRUB. The talk about code goes over my head.
Local techie says the hardware is good. Tried reloading Ubuntu from CD. Tried loading the unmentionable OS.
Tried using Spotmau Powersuite.
View 5 Replies
View Related
Aug 4, 2010
I am trying to install 10.04 32bit onto a new 1.5TB harddrive. I had previously installed 10.04 64bit on an old drive in the same nmachine. I partitioned and formatted the new drive using the old system. I have a couple of windows partitions and restored Win2K images to them, 4 formated Ext3 partions for whever flavour of Linux appeals to me a swap and two huge NTFS Data (home) and work areas. I installed Grub on the new drive, it also has its own partition for boot config files. The old drive has now gone.
Grub2 boots OK and gives me option for all the OS's even the one that are gone, thats OK I can fix that later with grub-update. Win2K boots fine and I see my NTFS partitions.
Now I boot from the Live i386 CD and chosse to install Ubuntu. The only thing that not allowed to default is where to install. Specify partition manually, Choose a spare 20GB Ext3 and the swap is already there too. I let it reformat to Ext3 and mount as /. (In Advanced I let the install boot loader default to ticked on /dev/sda )
The install goes OK until I hit the pop-up "Installation Failed". The installed encountered an unrecoverable error. A desktop session will be run etc etc..
I have tried this at least 10 times no. I downloaded and cut a new CD even though the old one worked fine on another box. Tried unticking the boot loader. Disable the floppy, removed the floppy.
I am relatively new to Ubuntu. Where do I look for the cause of the problem? I'll cut and paste the install log files in a moment.
View 5 Replies
View Related
Apr 29, 2010
I got it to install initially, but when I tried to edit the xorg.conf file (looking for the "Modules" sections), it came up blank, so I skipped that part.
Ubuntu installed okay but was SO slow and the graphics are not great ( I think because I was supposed to edit the xorg.conf file)
I can't really get it to run anything, and more than half the time it won't even start up. It just gives me the error:
Mount of File system failed
The maintenance shell will now be started.
Control-D will terminate this shell and retry
root@ubuntu:~#
I've created an alternate cd of Xubuntu thinking if I could install it I could maybe get the iMac to run faster...or at all...but I can't figure out how to get it installed. Do I need to uninstall Ubuntu first?
When I try to boot from cd, I get this:
First Stage Ubuntu Boostrap
Press l for GNU/Linux,
Press c for CDROM.
Stage 1 boot:
if I hit c, it takes me in a continuous loop of that screen until it freezes. (Booting CDROM...)
If I leave it alone or hit l, it takes me to the default:
Welcome to yaboot version 1.3. 13
boot:
I have two options, Linux and old...I haven't tried old...but if I enter Linux, or just let it go there itself, it tries to boot Ubuntu, but gives me the "mount of filesystem failed" error.
at the moment it's saying:
root@ubuntu:~# podif[517]: can't read sid from 520/stat
I'm trying me best to figure this out, but I'm at a loss. My husband wants to me to stop trying, but I'd really love to make it just work.
View 2 Replies
View Related
May 12, 2010
I installed Drupal and there is only one site. It I access the website [url] where Drupal is installed I can easily see it functioning properly. But on internet it is not loading properly the colors etc are not visible properly.
Following changes were made to all the sites
Code:
View 1 Replies
View Related
Jun 14, 2010
I'm running 11.2 KDE 4.3.5, recently every time I've tried to use the Updater Applet I get this error after choosing to install an update: PackageKit Error internal-error: Installation aborted by user. Then I run YaST to try to manually install the update and get the following error:
Subprocess failed. Error: RPM failed: error: package kwin-4.3.5-0.2.1.i586 is not installed. Really unsure how to fix this but it's only blocking updates/patches, I can download new programs fine.
View 5 Replies
View Related
Feb 1, 2010
I have debian testing installed on my system. I have a separate home partition which i shared with Pardus2009 which i installed later on a different partition.
Now pardus boots fine without errors, but debian says "filesystem check failed" because last mount time of / is in future. it gives a maintenance shell and after a manual fsck corrects this problem, debian reboots fine, but then says theres a problem with the /home partition (but this can be ignored)
View 2 Replies
View Related
Feb 26, 2010
Online Update is offered up 6 updates - only 2 succeeded (Mozilla and libpoppler). Here's the errors for other packages: kbd - Keyboard and Font Utilities (includes aaa_base update) Subprocess failed. Error: RPM failed: error: package kbd-1.14.1-20.2.x86_64 is not installed
php5: fix for several vulnerabilities Subprocess failed. Error: RPM failed: error: package php5-ctype-5.3.0-2.4.3.x86_64 is not installed
patterns-openSUSE: add susehelp to KDE base pattern
Subprocess failed. Error: RPM failed: error: package
patterns-openSUSE-file_server-11.2-20.22.1.x86_64 is not installed
KDE 4.3.5 Update
Subprocess failed. Error: RPM failed: rpmdb: PANIC: Invalid argument
rpmdb: PANIC: fatal region error detected; run recovery
[Code]...
View 6 Replies
View Related
Feb 10, 2010
i have installed dhcp server on RHEL5.after instalation when i want to restart it.it shows failed message. rpm package is also installed.(dhcp-3.0.5-13.el5) dhcpd.conf file is also in /etc directory
View 1 Replies
View Related
Mar 31, 2010
When the RPM runs it come up with this error. How do I install the required dependencies? I have added more repositories, but still there are a few dependencies missing. Is there a zypper/sudo -get or something available? Opensuse 11.1 Gnome
[code]...
View 4 Replies
View Related
Jun 27, 2010
I have configured the remote installation of Fedora 13 with kickstart with nfs installation method. All work ok until I boot the Fedora 13 client system.
Fed13 client system receives the IP address from dhcp, receives the loader, loads vmlinuz and initrd.img from tftp, load anaconda, configures the network and dev eth0, mounts nfs server to load kickstart file, loads kickstart file (language...) but when it tries to mount nfs server to install from Fedora 13 installation tree it fails.
First, I thought that I had an error on my NFS configuration but I was wrong. I opened tty with ALT+F4 on the Fedora 13 client and I sew this error:
Code:
Is this a bug or can I modify anything to correct this error? How?
View 3 Replies
View Related
