I am trying to install on my Powerbook G4 version 9.04. IT went well and I rebooted it boots up and appears to be loading... In fact says "Loading, please wait"
But the screen begins slowly to fade to white until I can't see anything.
There is one error that might be related I noticed "Radeonfb invalid rom contents".
I just installed Karmic on a PowerBook G4 Titanium. The install went fine after I figured out that I had to set the date in the open firmware because the PRAM battery is dead. Now when I boot, I get a white screen with black text telling me it's found the display then the splash screen shows up but I never get the login screen, just a blank screen. I can switch to the virtual consoles and fool around, but I haven't gotten it to work yet.
Edit: I've attached .xsession-errors (Has UF always required file extensions?)
I have a Powerbook G4, 550MHz, and I had 10.04 on it, but the wireless wouldn't work. I know that there are tons of variants, but I am sick of wasting disk, time downloading, testing, ect. Has anyone found a really good version of linux that will work? Or am I better off with OS X 10.4?
View 3 Replies View RelatedJust did a fresh install of Ubuntu 10.04 and I can't enable the Extra Visual Effects. I get the error "Desktop effects could not be enabled".
View 9 Replies View RelatedWell currently I am having a problem on the installation, when it goes to step 3 "keyboard layout" and I press forward it just stays there loading and does not proceed. It does not freezes or anything but stays there forever and does no proceed to next step. Burned another live-cd thinking it may be the disk itself but still no luck.
View 3 Replies View Relatedi installed ubuntu 10.10 on old powerbook g3 (6g hard disk, i think it lombard)m with xfce as desktop (xfce and not xubuntu wich is slower). anyway, everything works fine, but for some reson my vlc just cannot run video file. each time i play him it show a black screen and fall. i tried config his outpot video, and it still dont work, in smoe mode the audio working but the other not.i tried another movie player, and only totem, kaffeine and xine works ok, although very slowly (the video work not smoothly). kaffeine works fine, but not enough. when i had ubuntu 8.04 in the same computer vlc was the movie player i chose and he did his job perfectly.
View 7 Replies View RelatedI want to use an old Powerbook i have as a music juke box and am thinking of using ubuntu to run it - assume that i will dual boot with a small partition for osx? and then run an external hard drive with flac encoded music - into laptop then usb dac to hifi Will ubuntu run ok on this machine? I have removed all the stuff on the old hDD - anything else i need to do?
View 9 Replies View RelatedI'd like to try Ubuntu netbook remix 10.04 on my 12" G4 Powerbook, but I can't seem to find it. Does it just not exist? Apple have a range of older 12" models that are no longer supported that Ubuntu would work great on.
View 4 Replies View RelatedI am trying to find out how to get the visual effects working on my PowerBook G4. I have 10.04 installed, and it's running an ATI Mobility Radeon 9600 M10. I can't access the xorg.config because it doesn't exist.
View 1 Replies View RelatedI have an Apple Powerbook G4 17" Feb'2005 (1.67GHz PPC G4 CPU, 1Gb RAM, 100Gb hdd) at home. Having the infamous "vertical lines" problem, I need to use use an external 1440x900 DVI monitor (same resolution as braindamaged Apple LCD). I also have some USB-serial hardware (weather station, Arduino, etc) and a Nokia N900 configured as a router (this lets me use a fixed IP on the Powerbook).
I had Ubuntu 9.10 running 24h/24 up to yesterday, so I just updated the yaboot.conf in /dev/hda2 (the boot partition) and booted natty off hard disk and USB pendrive (great thing having an yaboot on a bootable partition). Since Apple separated me from 2900 bucks (ouch!!) six years ago, I don't want to abandon this Powerbook until its very end. But it seems Natty is not a viable option...
[code]...
Installed Ubuntu 10.10 on my new-to-me Powerbook 1.67Ghz. PowerPC, as a platform, is most definitely *not* dead. Installation went normal. I installed with network connected to Ethernet rather than Wireless. Installed Wireless firmware. Then I had wireless.
Backlighting didnt work until I added 'i2c-dev' to /etc/modules. Restart, and backlight works, although its a little too sensitive. Hardware acceleration wasn't enabled, so I had to add this to a file called Radeon-kms.conf in /etc/modprobe.d/
"radeon options modeset=0"
Reboot. Then I had hardware acceleration and Compiz.
Install/run sensors and sensors-detect. Run as root. Detected HD temp, CPU, GPU temps and fan speed. Make sure this is in /etc/modules: therm_adt746x. Thats the thermal control stuffs. I then installed openjdk and netbeans and eclipse. OpenJDK is slow, but I feel that is due to OpenJDK itself, and not PowerPC.
This gave me a working CPU ondemand throttling:
apt-get install cpufrequtils
Installing this gave me a working battery-applet that reported a percentage:
sudo add-apt-repository ppa:iaz/battery-status && sudo apt-get update
sudo apt-get install battery-status
/usr/lib/battery-status/battery-status --indicator
I get really good battery life, and everything that shipped on this laptop actually works as designed. Forever PowerPC, Forever Ubuntu
I've just installed Ubuntu 9.10 on an old PowerBook G4 I have, and when I go to Power Management, it doesn't provide the tab for battery-related settings (nor do I get the little battery/charge icon in the upper-right panel). I'm comparing this to the version of Ubuntu 9.10 I installed on my EeePC netbook, where those things are present. Is there anything I can do to get the Power Management preferences to recognize that the machine has a battery?
If it helps: the PowerBook had Ubuntu installed on it using the 9.10 "alternate" .iso, as I was having trouble burning the "desktop" .iso to a CD.
I have a Good Way Technologies BU2220 CardBus USB 2.0 card which works fine on this same Mac under OS 9.1. It also works fine on a more modern mac with OS X. But I cannot understand why it's not working in Ubuntu 9.10. I had it recognized (I think??) when I had Kubuntu 5.10 (Breezy Badger) installed on this system. I have an old dog - a PowerBook 3400c 240 Mhz 80MB Ram, with a 40 GB HDD. I have Mac OS 9.1 installed on a 5GB partition, and the rest is Ubuntu 9.10, using the LXDE GUI. I switch between Mac OS and Linux using Boot X.
When I slide in my USB card (making sure I have the external power supply attached to it), the system shows a bit of activity, and my display brightness reverts to default. Then there's no more activity. Of course, USB flash drives and USB mice won't work when plugged in. I navigated to /var/log, and looked in the Messages log. There were the following entries:
Feb 11 13:42:09 PowerBook kernel: [ 374.949456] pcmcia_socket pcmcia_socket1: pccard: CardBus card inserted into slot 1
Feb 11 13:42:09 PowerBook kernel: [ 374.949881] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot
Feb 11 13:42:09 PowerBook kernel: [ 374.949916] pci 0000:05:00.0: PME# disabled
[code]....
I have a Titanium (Onyx) 550 Mhz G4 Powerbook and the standard gnash does not work. I read that you can compile a custom version of gnash for laptops with low spec graphic cards. Could anyone give me guidelines how to do this with gnash? or swfdec? or lightspark?
View 2 Replies View RelatedI installed Ubuntu 10.10 on my PowerBook G4 (I think that's powerbook 5,6 but I could be mistaken). Most everything is fine from a function standpoint except for the touchpad/trackpad. Unlike most users who seem to be getting an insensitive touchpad, mine seems to be picking up some interference from an unknown source. The mouse frequently jumps around the screen either horizontally back and forth or sometimes vertically. If I disable the trackpad it seems to stop (at least for a few minutes). Sometimes I can lay my palm flat on the trackpad and it will cause the mouse to stand still also which makes the external mouse usable.
Are there any solutions to this? (I did install the, what is it, gpointing-devices package? The one that provides the GUI for touchpad configuration and that has not helped at all, except that I can use it to periodically disable the trackpad for a temporary fix)
I've had a Apple Powerbook G4 for a while now, but being mostly a Windows user I've never used it. I remember when it ran it's native OSX (Which I can't for the life remember) Probably Tiger? Anyways... I tried installing Ubuntu on it about a year and a half ago, the installation was botched and I left it sitting there with no purpose in life. :O
So I've decided to dust the laptop and give it another go. I've progressed a little further with my Linux experience, having installed and tested a few distros and even switching over to Ubuntu 9.10 for about 4 months. Enough of my life story and more to the point.Has anyone installed Ubuntu, or any distro for that matter on the Apple Powerbook G4? I know there are different versions of the G4 and I'm not entirely sure what my version is, It's the 1.6Ghz version with The Nvidia card (Err I think) and extra Wireless card installed. I am not very capable with Mac - After checking Apples website I believe it's the 15inch.
I've read the FAQ thread and will begin trying to install Ubuntu tonight at home, I just wanted some suggestion and some pointers in the right direction. What distro would be most suitable for my hardware? and What is easiest to set up?
Anyway, I've a decent understanding of the various Linux console commands and know how to work my way around a text editor or file system. But I can't seem to fix what's wrong with my computer. I'll list my info here and then discuss the most pressing issues that I need help with.
It's a 17" PowerBook G4, with Airport Extreme (which I understand is a headache all on its own: I'll likely get to that later)
Results of ~$ lspci:
I downloaded the most recent .iso for the PowerPC from [url], specifically the 4.4 GB DVD copy.
During installation, I told it to install only the Desktop Environment and Base System. Installation went through without a hitch, though it failed to connect properly to my Wireless card.
The first issue I encounter after booting is during the login. When logging in as a non-root user, I'm told to change my password immediately (root enforced). I've done this every time I've logged in. Immediately after when I log in I'm told that the system clock is wrong: It's currently set to Jan. 1, 1970. If I try to change it, I get a message saying that I can't, and my desktop won't load properly. If I ignore the system clock issue and try to change it in System > Administration > Time and Date later, after entering my admin password I get a message that says
Failed to run time-admin as user root.
Failed to communicate with gksu-helper.
Received:
Changing password for root.
While expecting:
Apparently the password issue is related to the Time and Date settings (according to Google), but I can't fix those because it wants me to change my password.
10.04 was working fine till one day I boot up, and there's a weird grey screen. I hear login sound, but nothing is displayed on the screen, it just goes grey with weird shapes and sometimes color stripes. Sort of like grey screen of death...
I thought I would recover my nvidia drivers, but I get the same grey screen when booting from Live CD also. Even from ubuntu recovery remix. Ubuntu Live CD launches, I get a menu, but when it starts to boot, grey screen again.
we installed Ubuntu Server on a VPS machine then installed VPS desktop after reading this tut markus.revti.com/2009/08/installing-vnc-remote-desktop-on-ubuntu-linux-vps. I'm able to connect to the VPS but all i see is a grey screen.
View 1 Replies View RelatedI've been messing around to try and play runescape (Java based) on my laptop. I run Lucid Lynx (in dualboot with vista) and have Java installed. Now I'm trying to get Runescape to work so I have even more reason to ban Vista completely. So I installed Java, and tried in firefox (3.6.6). It loads the log in, I log in, but then I get a grey screen with "applet started" in the status bar but nothing more.
When that didn't work I did some googling and tried it with SeaMonkey(2.0.4) - same result. Would another browser help or is there something else wrong?
When I close my laptop and open it the screen become grey and blotchy with almost an argyle pattern. This has only started happening after I configured the usb ports to work in my VM. My startup screen also says something about a usb problem, and S for skip and M to manually fix it but I have had no problems with my usb. Oh except for my computer won't start
View 2 Replies View RelatedWhen I am using flash a lot of times it will just display a grey screen or just stops. I wanted to use Turbotax today but I can not because of this.
Opensuse 11.3
Firefox 3.6.13
Shockwave flash 10.1 r102 (this is what it says under add-ons)
when I look for flash programs installed in Yast I get two things
flash-player 10.1.102.64-0.2.1
pullin-flash-player 11.3.1-2.1.1
I just installed Moonlight but except for the clock that starts running, buffering and connecting to the video server nothing else works.The screen stays grey and there is no sound. I thought it might work when I install Java applet, but also that doesn't fix.
View 1 Replies View RelatedI just tried installing OpenSUSE 11.1 onto my Playstation 3. I installed the otheros.bld fine (which I downloaded via a link provided on the OpenSUSE website). I then inserted my 32-bit Gnome CD for installation and restarted my system. Then on startup, a blue/grey screen appears. Here are the links to the screenshot (sorry for poor quality):
[Full Screen]
[url]
[Top Half]
[url]
[Bottom Half]
[url]
As you can see, the only option is for me to select the gameboot, which obviously takes me back to the Playstation XMB. There are keys at the bottom of the screen, but this is only to change the resolution. So I have no option to install the OS.
Does anybody know why this screen appears and have any ideas on how I can get around this problem to install SUSE onto my Playstation?
I'd like to install Fedora 14 64bit as a dual boot on an existing win 7 32bit system. When I boot with the Live CD, after selecting "boot" in the Fedora boot selection menu, I get a grey screen with a white cursor, and the system freezes. I checked the Live CD on my laptop and it worked perfectly.
My System:
MotherboardASUS P5Q DELUXE
CPUIntel Core 2 Duo E6750, 2,66 GHz, Sockel 775
[code]...
I'm trying to install Kunbuntu 10.0.4 on a late 2009 27" Core i7 iMac. Unfortunately the screen is always black while the CD/DVD installer seems to work. All firmware updates neede to the machine have been applied and it is non affected by the known problems of the late 2009 27" iMacs.
View 1 Replies View RelatedSo after I went to OMG ubuntu site and downloaded "complex shutdown" since it looked useful and I needed it I installed it..but it doesnt seem to start up for some reason so when I went to uninstall it software center went "blank" just a grey screen with the black toolbar
View 2 Replies View Related1st install no good, but did second to fix some possible mistakes.Booted to login prompt and then, after login, nothing until entered telinit 4, then scrambled screen, then changed to probably the normal screen background of grey/white with numerous white globes, but nothing else and cursor moved, but wouldn't function on occasions also got box with login name, password locations.Got message of "Display not set" and that the problem was so complex it couldn't be explained with these minimal resources.Did third full install and changed screen option from my known resolution with framebuffer, to safe standard, but no improvement.Lilo was installed to MBR, and had 2 partitions flagged as bootable (/ and /boot).Found nothing on forums or FAQ, but suppose could give change of kernel a shot, but as used what cd started with, that seems unlikely.
View 6 Replies View RelatedI got macbook pro 5.1 recently upgraded to 11.04, all works out of the box! However when I watch movies or play a game from time to time I observe a horizontal line in the upper part of my screen which I believe is a screen tearing.Depending on a movie player this effect is more or less visible.nvidia propietary driver enabledvsync enabledcompiz settings adjusted (refresh rate ->60, vsync)nvidia-settings -l is loaded with the systemMaybe it's not a huge problem but everything works fine under osx
View 3 Replies View RelatedI have an imac 27'' i7 and cannot get to install ubuntu.
I always get a blank black screen when during installation even when I select the "safe graphic mode". During installation, the i get some multi-colored straits at some point and then nothing, it returns to the black screen.
I even tried to partition my hard drive with Gparted and got the same blank black screen even with the "safe graphic mode" option.
