Fedora Installation :: Won't Uninstall \ Screen Goes Blank And Computer Becomes Idle?
Feb 22, 2009
i have fedora 8 on my machine...i want to uninstall it..i restarted my machine with windows CD on it....but shortly after pressing key to continue configuring the installation, screen goes blank and computer becomes idle....i tried using about 10-15 different CDs of windows OS but failed every time...what could be the reason and how can i fix this......NOTE: but if i try to reinstall fedora the problem dosen't occur.
View 12 Replies
ADVERTISEMENT
Feb 3, 2011
Xorg - Screen Blanking after 10 minutes. Backlight level lower upon return. This is my .xinitrc file:
Code:
#!/bin/sh
#
#~/.xinitrx
setxkbmap "se"
xmodmap -e "remove lock = Caps_Lock"
xmodmap ~/.xmod
xrdb ~/.Xdefaults
xset r rate 200 25 .....
Code:
LIBGL_ALWAYS_INDIRECT=1
INTEL_BATCH=1
pcmanfm --desktop &
compiz --use-root-window --indirect-rendering ccp
After 10 minutes in idle state (watching a video in vlc or in flash counts as idle time too) the screen blanks. As I mentioned in the title, the backlight level is lower when screen turns back on. This is a new feature of the problem, and might be related to a recent upgrade of xorg. Where is the configuration file that handles the screensaver? And why is it even enabled by default?
View 4 Replies
View Related
Apr 5, 2010
i have installed ubuntu 9.10 on my hp nx6325 notebook, and everything was working just fine, then it updated and problem started coming up. First the computer wouldn't reboot after the update, blank screen, then i manually reboted and now some programs don't work (ubuntu software center, update maneger, avant window navigator)
i assume the update did some damage, so how can i repair this, is there a recovery tool or something.
View 8 Replies
View Related
Jun 1, 2010
I've recently done a fresh install of 10.04 on an Acer Aspire 5720 and it went pretty well. However I've a problem with the logon appearing twice. If I leave my computer idle for too long the screen locks. when I return I'm asked for my password which unlocks the computer but within a few seconds the screen locks again and I need to enter my password for a second time. This time the computer unlocks and stay unlocks.. but it's annoying I have to unlock it twice !
How can I extend the length of time before it unlocks or disable it all together.. until the problem gets fixed?
View 9 Replies
View Related
May 9, 2010
I am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
View 3 Replies
View Related
Jul 5, 2011
several months ago I installed Maverick and it worked well, but eventually I lost the GUI. I fiddled with it to no avail. So I decided to do the Natty upgrade and it ended up not fixing the problem though I am able to boot to graphics safe mode.
I popped on this forum and a couple others but got little response and ran out of fiddle time. SO now I have a little time to mess with this, and I REALLY want to move back over to Ubuntu so if any one is familiar with that could be the issue
View 9 Replies
View Related
Jul 23, 2010
My laptop will be fine, then it turns off then immediately boots itself to a blank screen and no hard drive activity. This has happened 3 times today and never before. what ive done so far The first time this happened i tried turning it off and back on, still no screen and no hard drive activity so i took one of the RAM sticks out. Booted fine... To confirm that the RAM was bad i put it back and tried booting again, unfortunately it booted fine... i thought it was a fluke.
Until his happened a second time and instead of taking the RAM out, i waited a half hour and rebooted and it started booting fine, i turned my back for a sec and it was dead again. I have taken that RAM module out and am hoping it will not happen again, but it could well be the other RAM module since i really don't know or even if it is RAM at all.
Question is. Is this a RAM issue or something else? Where can i find a log to see what happened immediately prior to it offing itself? What's the chances it's the heatsync? (the laptop doesn't feel as hot as it sometimes does)
View 8 Replies
View Related
May 23, 2011
So after I went to OMG ubuntu site and downloaded "complex shutdown" since it looked useful and I needed it I installed it..but it doesnt seem to start up for some reason so when I went to uninstall it software center went "blank" just a grey screen with the black toolbar
View 2 Replies
View Related
Jan 26, 2009
I was able to get Fedora 10 to run on VirtualBox. Since the system wouldn't let me set the resolution to anything bigger than 800 x 600, I decided to get the nVidia driver (I'm running the nVidia 8400m G). I did it through this guy's tutorial: [URL]... After rebooting, I see the loading bars and everything, but I get a blank screen with a cursor. After pressing ctrl+alt+F3, I was able to log in to the root and execute the "akmod builds the required kmod on bootup" under the "For GeForce 8 series" [URL]... After a reboot, I still get the same thing. Will I have to reinstall Fedora 10 and just not update the nVidia graphics drivers? I have a 20" monitor that has a resolution of 1600 x 1050 and I would really like to take advantage of that.
View 14 Replies
View Related
Mar 6, 2009
i had a serious problemafter i checked my hardware detected by using liveCD, there's no problem i thoughti successfully installed it on my PCbuti got blank/no screen appeared when it started up
View 1 Replies
View Related
May 27, 2009
Im trying to install fedora 10 on the ps3 but i get a blank screen after the media test question, i tested the media in this case the CD and it says it has no errors but when it goes to install it switches to a blank screen and gets stuck. Can anybody help me, or tell me what im doing wrong. Steps that i taken.
1.Download the ppc version of fedora10.
burn the ISO-image using the lowest possible setting.
2. i made a foder in my usb stick called PS3 and inside has another folder called otheros then inside it has the file otheros.bld
3. formatted the ps3 using the xmb. to 10 gigs for the other OS.
4. install Other OS using the usb stick that i made, install successful.
5. switch to other OS, using the XMB through systems settings.
6. Next I see a cd , i click on it with a mouse, see two penguins two options install 32 bit or 64 bit, i choose 64 bit.
7. then i get a media test question , choose skip and loads from CD.
8.Switches to blank screen and nothing else happens.
View 2 Replies
View Related
Jan 20, 2009
I've just got a second-hand computer at a bargain price and I would love to install Fedora 10. I have some previous knowledge on Ubuntu, so I'm not completely new to Linux, but I'm pretty amateur still. Anyway, I have some trouble installing either Fedora or Ubuntu to this machine right now. It has an AMD Sempron 3800+ (2,2 GHz) & an ATI Mobility Radeon X1250. I have the usual "Automatic boot" screen.
Then everything seems to load fine, besides I have an apciphp error. After this single line of error, I have the usual loading bar; and then a blank screen - nothing seems to happen. I saw there were some issues installing Linux on this model - so if you can help me solve this, I'm sure other people will benefit as well!
View 1 Replies
View Related
Oct 26, 2009
I have a fresh install of Fedora 11. All is good except the VNC client. When connected using the client all is fussy or blurred out. The Fedora computer is next to my computer and I can see the movement of the mouse on its screen, but cannot see on VNC viewer. I have tried this from several different computers Windows XP and Windows 2003 and the result is the same.
View 9 Replies
View Related
May 26, 2010
I just tried to install Fedora 13 but after the log on count down I just get a blank screen - nothing else. The disk is still loading but no screen action at all. My graphics card is Nvidia GeForce 6150 LE.
View 11 Replies
View Related
Nov 21, 2010
I am trying to use a F14 network install CD to upgrade on an old HP Pavilion 9695C (Athalon 850MHz, nVidia NV5 RIVA TNT2/TNT2 Pro AGP) with F12 on it. This same disk successfully upgraded a HP Omnibook 6000 with F12. I boot with the network install CD and get the initial menu to select to install/upgrade, install using basic video driver, etc. After selecting either upgrade or basic video driver install, I see the CD being read, then nothing, just a blank screen. I had a similar problem with F12 network install on this machine. So I tried adding "vga=0x318 nomodeset" to the upgrade boot options. The only difference is a quick flash on the screen, then a blinking "underscore character" cursor. The "install using basic video driver" has the same result.
Have also tried:linux nofb
vga=791 [nomodeset]
vga=1 [nomodeset]
xdriver=nv nomodeset
xdriver=vesa nomodeset
However, I always end up with a blank screen or blank screen with blinking underscore cursor. I know this particular AGP has problems with the nouveau driver. On F12 I had to force it to use the nv driver. I submitted a bug but there was no interest on it as this was F12 and F13 was the latest at the time. I did try to upgrade to F13, but ran into this same problem. I was hoping F14 would be better.
View 11 Replies
View Related
Feb 9, 2011
trying to install fedora but after I sellect install or install with basic video, the screen scrolls a bunch of text then goes blank. I'm on a laptop and tried unplugging. The lcd monitor but it still goes blank on the laptop screen. The cd is no longer spinning and the hdd light isn't blinking. What do I do?---------- Post added at 10:44 PM ---------- Previous post was at 10:11 PM ----------Sorry if my description of the problem is confusing, here's a video of what its doing
View 1 Replies
View Related
Nov 19, 2009
Just finished wiping and re-installing F12 From a DVD on an Dell Inspiron 9300 with a NV 6800. The NVidia site driver refused to install, so I used the method documented here
[Code]...
as instructed to in the sticky. On rebooting, after the load animation, the screen goes blank/black. If I click around, I can hear some beeps from the OS so I assume that things are running but i just can't see anything.
View 5 Replies
View Related
Dec 4, 2009
when I fired up the installer, after asking to test the media (which I skipped) and starting up the actual installer (anakonda, akonadi, whatever the name was, can't remember now and too lazy to look it up), it seemed to start up fine, except I couldn't get the wizard to show up. I did see the cursor, and occasionally I would get the "searching for storage devices" message (I restarted it a few times to see if I would get it working), but nothing. I also tried random key presses (namely F12,F1-F4), and after some time got a message saying that I had to enter the root password, so I presumably got to the root password screen blind...? (meaning that the installer apparently is ther, I just don't see it?)
After several restarts, though, I managed to get the wizard visible (just luck?), so I went ahead with it, but apparently I messed it up, when I rebooted I didn't get the screen visible again, after some random keypresses I got to the login prompt but I obviously hadn't created any accounts, so :/ I tried booting from the DVD to the rescue mode and manually adduser-ing from the console, but when I tried logging on, it would just come up with some kinda bluetooth-related error message and then hang on there with only the background image on the screen. I didn't try the basic video driver thingy yet because this didn't seem like a video driver issue (well, not entirely anyways), and I need my 3D acceleration, so...
Basically, I'd be glad if anyone knows what's up with the installer, and if it's not fixable as such, would installing with the basic video driver and then installing the proprietary drivers afterwards be all right? Sorry for the wall-of-text, though, it's just one of those days, it's bedtime and I get carried away...
[Code]....
View 2 Replies
View Related
Jan 25, 2010
I installed fedora 12 to a 4GB flash usb flash drive. When I reboot and select windowsxp, grub displays a blank screen and hangs up.
[root@localhost Terry]# fdisk -l
Disk /dev/sda: 160.0 GB, 160000000000 bytes
255 heads, 63 sectors/track, 19452 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x41ab2316
Device Boot Start End Blocks Id System
[Code]....
View 2 Replies
View Related
Oct 14, 2009
I have just installed Fedora11 on my machine - the installation failed to start the x server so I had to install with the textbased installer. When the installation completes, I boot up and first I update Fedora with "yum update". Then I install a nvidia driver with "yum install kmod-nvidia". Then I run nvidia-xconfig to make a config file. But when I try to run "X", I just get a blank screen. I can run system-config-display fine, and setup my resolution etc. The log doesnt seem to give me any errors.I have two Geforce Fx3500 card in the machine.
View 10 Replies
View Related
Dec 15, 2009
I attempted to do the upgrade from 11 to 12 with the Preupgrade Assistant. Unfortunatly something went terribly wrong. Everything went well, excluding the size of partition error, untill the reboot. I did have to remove two previous installs. Now grub gives me an option to upgrade to Fedora 12. When I select this the screen runs code quickly and the screen goes blank with alot of disk activity. Then nothing. Is there a method of recovering this install? I am fairly new to Linux Administration and I am just knowledgable enough to mess things up.
View 1 Replies
View Related
Mar 5, 2010
I have the following system using an ATI graphics card, SATA Drives and want to install Fedora 12 as a dual boot option with Windows XP.
Using an install DVD it seems that Fedora installs then at a point during the copying of packages the screen goes blank actually switches off. The DVD Drive and Hard drive still work , my guess is completeing the install. On reboot I do not get the option to boot to linux.
I have 2 SATA 3Gbs Hard Drives formatted for windows NTfs. One has 2 partitions and some free space, the other is formatted NTFS and is my data disk.
I would like to be able to access the data disk with both Windows and Linux and install Linux system in the free space.
Having read a few of the guides available, none of them seem to mention this problem, although I am aware of the Ati support problem. I am hoping I do not have to replace my graphics card with a nVidia one.
View 2 Replies
View Related
Jun 13, 2009
[code]...
when trying to choose the Linux partition, I found that it would just hang at a blank screen. Looking further into the problem, I had booted with the Linux Rescue and checked the /boot/grub/grub.conf file. It appeared to be that the menu was set to hidden. I got rid of that line, and checked the boot arguments. It still had acpi=off set with the kernel and everything else seems to be in order. Root is set to root (hd0,2) which should be correct.
View 6 Replies
View Related
Sep 19, 2010
I have just upgraded my FC12 installation to FC13. The initial boot failed (just blank screen). Second time I received 'selinux targeted policy relabel is required'. I let that run, but still the boot did not suceed.
I then went in to verbose boot and saw that the boot would hang at libvirtd. So I disabled libvirtd for anything above run level 1. Next boot failed at atd, disabled atd. Next boot failed at 'monthly Smolt checkin'.
At that point and booted in to single user mode and dissabled SELinux, thinking that was the cause of all the problems. That did not help.
The update process has also removed my previous kernels, so I can't test a different kernel
View 5 Replies
View Related
Jun 4, 2009
Ive recently built a music server with the following configuration:
AMD Athlon 64 X2 5200 processor
Gigabyte GA-MA74GM-S2 Motherboard with 2GB ram
Western Digital Caviar Green 1TB SATA Hard Drive
Samsung 22X CD/DVD Burner IDE
I would like to be able to run Fedora 10 (and Vortexbox, an application to burn and store CD�s) but have been unsuccessful in getting F10 to load. I am a novice Linux/Fedora user. I've been able to load and run Windows XP on the server with no problem. I have downloaded and verified both the x86_64 DVD and the x86_64 Live CD from the Fedora website. With the live CD, the last thing that appears before the screen goes blank and the install freezes is the blue line changing to white. I have tried several different SATA configurations , have turned off all non essential options in BIOS(ethernet, USB support), and have tried loading with fail safe bios settings.
View 4 Replies
View Related
Dec 26, 2010
Is there a known problem with the Lubuntu 10.10 image here? I have downloaded it to two different computers, then burned the images to two different blank CD's (different brands) and neither loads. Both only get as far as the Lubuntu menu, once ENTER is pressed at that point to load the LiveCD, a blank screen eventually appears with a flashing cursor at the upper left of the screen, that's it. They were both burned using the slowest burn speeds available.
View 9 Replies
View Related
Dec 22, 2010
I have been running 10.04 quite successfully, when I upgraded to 10.10, I have a problem with the newer kernels. If I let it boot into the latest one 2.6.35-23, I get the Ubuntu 10.10 splash screen for a second then a blank screen, same with 2.6.35-22. I have to run with 32-25 to get it to load the gui.
I have an AMD Sempron 2800, 1.6GHz pc, but I'm not sure if it's running 64bit.
View 7 Replies
View Related
May 4, 2011
I've been running Ubuntu 10.10 very smoothly for a while now. Decided to upgrade to 11.04 - managed to corrupt the hard disk the first time by letting the laptop hibernate part of the way through but reinstalled from a live CD of 11.04 and it's now working except for this issue.
If I shut the screen on my laptop (or press the screen off button) either the screen won't come back on or it will but frozen (I can move the mouse but not click on anything etc.) In this state music continues to play (from spotify under wine) and if I press my hibernate shortcut (power button) the computer hibernates, only to wake into the same situation. I've got a Dell Latitude D520, upgraded to a bigger hard disk and more ram - the ubuntu partition has 50gb. Windows is working fine.
Edit: I noticed a sticky thread which includes something about a blank screen but I think this is a different issue?
View 2 Replies
View Related
Mar 10, 2010
I am trying to install fedora 12 on my computer. I have burned the live cd ISO and it works just fine until right before it shows the login screen. I suspect that it may have to do with my ati radeon 9800 graphics card. give me some boot options or some such thing so that I could install fedora on my computer. Also some other specs
ASUS A7N8X Mother Board
AMD Athalon XP
1GB ram
View 5 Replies
View Related
Feb 2, 2011
Sometimes, when I leave my Ubuntu's X Server on, I'll come back after several minutes and see that my machine is powered off. Sometimes this happens, sometimes it doesn't, but I don't think it's because of hardware failure rather than my lack of measurement.
It used to power off in terminal mode (CTRL+ALT+F1) but then I added this to ~/.bashrc and it went away:
Code:
if [ "${USER}" == "root" ]
then
export TMOUT = 3600
fi
Also, I checked my logs and I see this:
Code:
Feb 2 00:00:09 l1nux AptDaemon: INFO: Quiting due to inactivity
Feb 2 00:00:09 l1nux AptDaemon: INFO: Shutdown was requested
Since it's not a CRITICAL message, but an INFO, it seems like its a planned shutdown.
Does anyone know how I can turn this feature off?
View 3 Replies
View Related
