Ubuntu :: Suspend To Ram Not Waking Up?
Jul 5, 2011
when I put my lappy to sleep, it looks as if it sleeps well.... the light blinks, just like when it did on windows when it slept but when I try to wake it up, it powers up the fan and hdd and i see nothing on my screen, it doesn't even light up!! I am always forced to do a hard reset I followed a debug tutorial and got this out of it:
[ 1.355059] Magic number: 0:291:740
[ 1.355065] hash matches /build/buildd/linux-2.6.31/drivers/base/power/main.c:419
do I need to blacklist a driver or something?
View 2 Replies
ADVERTISEMENT
Oct 25, 2010
If I suspend this toshiba satellite, and the battery is or gets low it will wake from suspend to tell me that it will need to suspend due to a critical low battery. Which is pretty dumb. I've experimented with this by plugging and unplugging the ac adapter.
View 1 Replies
View Related
Feb 4, 2010
when I put my lappy to sleep, it looks as if it sleeps well.the light blinks, just like when it did on windows when it slept but when I try to wake it up, it powers up the fan and hdd and i see nothing on my screen, it doesn't even light up.I am always forced to do a hard reset.do I need to blacklist a driver or something?
View 5 Replies
View Related
Dec 18, 2010
Is there a way to check what caused Ubuntu to wake from suspend mode?
Ubuntu 10.10 on a desktop.
Have tried disabling all BIOS wake events (and WOL).
Have ensured mouse doesn't move.
Need a way to know what caused it to wake. Happens 90% of the time, usually 3 seconds after it suspends.
View 2 Replies
View Related
Mar 3, 2011
I have an Intel DG35EC motherboard with on-board NIC. It is an Intel 82566 Gigabit NIC. It is wired, not wireless. I am using an Ubuntu "Live CD". Just out of curiosity (to see if it worked), I "suspended" Ubuntu and it suspended very well, but when I "resumed" Ubuntu the NIC would not connect back to the network. If I actually installed Ubuntu and didn't use a "Live CD" do you think it would behave differently?
View 1 Replies
View Related
Apr 10, 2010
I've got Karmic installed on an HP 6930p, and with relatively little intervention, all hardware has been supported beautifully. I'm using the ATI driver for graphics. Battery life increased dramatically after an update a couple of months ago. However, occasionally (1 in 8 times maybe), the screen is black when waking from suspend. Disk wakes, etc, but the screen is off. Trying to re-suspend with fn key doesn't work. Ctrl-alt-f key combos don't work. I have to hold the pwr button down.
View 5 Replies
View Related
Dec 15, 2010
I'm using ubuntu 10.10 on an hp pavilion dv9620.
For some reason, all of the sudden;
-my computer quit waking from suspend
-when my computer reboots (because I had to hold in power switch until it restarted) some of the items on my screen looks wierd for a few minutes, like there are tracers on some items (dock, top of screen, etc)
-when i try to wake my computer from suspend, the screen is a funny gray color with wierd blobby shapes that move around a little bit. And of course, doesn't load GUI or anything like that, just gray screen.
View 2 Replies
View Related
Aug 10, 2011
I'm looking to find a way to schedule my computer to wake up at say 7:00am. Every night before I go to bed, I put my computer into suspend so the fan doesn't wake me (old computer). I can't seem to find a task scheduler that allows me to be able to wake the system.
View 6 Replies
View Related
Feb 22, 2010
Is anyone else having trouble with waking up from suspend mode? After bringing the computer (Dell Studio 1555) back from suspend mode, GNOME moves very slowly. Cursor is unresponsive for significant amounts of time - any open windows do not respond to selection... Effects don't usually go away until a reboot is performed. This evening, one such restart resulted in a crash, where the shutdown process locked at the attempt to shut down the mouse/pointer module..
View 3 Replies
View Related
Apr 26, 2011
I have a new clean install of 64bit current slackware on a machine which previously run 12.1 to 13.1. It had suspend to ram working quite reliable before, but now i get black screen (sometimes with nonresponding mouse cursor on it) at every second or third wake-up.
I found out that it is not a complete lockup - full access to kde desktop could be restored by hitting alt+sysrq+s followed by alt+sysrq+l several times. I wonder what is causing this? How to get it to wake up normally at once?
Edit: I've installed latest nvidia drivers (260.19.44) for GeForce 8500GT card - previous version (260.19.21) of drivers exhibited the same behaviour in my current install of slack.
View 2 Replies
View Related
May 12, 2010
It's been a while now I've been experiencing an annoying issue with F12. The thing is that after the machine resumes from suspend (which is otherwise a perfect procedure), video performance (and sometimes audio, through Rhythmbox) reduces and videos play sluggishly. Rebooting the system fixes the issue.
Is there a solution for this behavior (other than rebooting)? Here are the details of my system: F12 x86_64 on an ATI graphics powered machine (Radeon HD3200) which obviously uses the free drivers mesa-drivers-dri-experimental which, otherwise work perfect on this hardware.
View 2 Replies
View Related
Mar 14, 2010
I am having problems with my wuxga 1900x1200 laptop display.The machine is a Dell inspiron 8600 with nvidia chipset.I am running driver 175 from the Karmic repo. My problem is when the machine wakes up after a suspend, the display blooms to bright white.The only way I have found to recover is power off the machine. After a bit of research I suspect it may be the refresh rates in xorg.conf, but lowering the values has not changed anything. Here is what I have currently.
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Wed Jan 27 03:02:48 PST 2010[code]....
orig values were horiz 30-128 and vert 50-90.I'm not sure it's the refresh...
View 4 Replies
View Related
May 23, 2011
3 questions i have about "pm-suspend-hybrid"
1. is it possible to schedule this command in the same manner as shutdown ? eg sudo shutdown -h 60
2. is it possible to schedule the laptop to come out of suspend ?
3. i have a usb sound card (xfi go). when waking from suspend, the internal sound card is selected. i have to manually select the external sound card & for whatever reason, also unmute it too
View 1 Replies
View Related
Aug 31, 2010
On my desktop, I try to instantly put some disks into sleep using hdparm, for some tests. Though the disks are unmounted, they wake back up in seconds. How can it be? How can I track which process wakes a disk up with what operation? I think unmount disks should default to standby during system load.
View 2 Replies
View Related
Apr 13, 2011
Upgraded to Ubuntu 10.10 recently. (Now that was a mistake...) Problem occurring now that when I close lid of my laptop (Asus K40IN series) , which I set to suspend, it won't wake up (and I have to shut down and reboot). It used to be fine (in both Windows and 10.04) though so must've something to do with the upgrade to 10.10.
View 2 Replies
View Related
Jun 20, 2011
I dual boot both Windows and Linux and I often put my computer to "sleep" at night so it's easy to wake up the next morning. In Windows I just need to press a few keys and my computer comes to life, in Linux this doesn't happen and I have to actually go for the power button. (This wouldn't be so bad if the computer wasn't in a hard to reach place in a cupboard) At the moment I have a USB hub which my keyboard and mouse plug into, but for the sake of testing I plugged a second USB keyboard directly into the machine itself, again neither wake it. Doing a bit of research I have discovered that the wakeup devices are stored in /proc/acpi/wakeup The contents of the file by "cat" are as follows:
Code:
monotoko@KatieIV:~$ cat /proc/acpi/wakeup
DeviceS-state Status Sysfs node
PCE2 S4*disabled pci:0000:00:02.0
[code]...
At this point I have reached a dead end, how do I tell the acpi wakeup to accept input from USB keyboard as a kickstart?
View 2 Replies
View Related
Apr 30, 2010
Since installing 10.04 yesterday my laptop will not wake correctly from sleep mode. Opening the lid wakes the machine up but the graphics are all wrong. Loads of tightly packed horizontal lines. Turning the machine off and restarting makes all ok. It's only on wake up does the problem happen. The laptop is an Acer 1652,with an ATI Mobile Radeon X300 graphics card. Intel Pentium M.
View 1 Replies
View Related
Mar 3, 2011
I am running Ubuntu 10.10 on a Lenovo T60 and am having problems waking up from sleep every time I update the kernel.
I just got the upgrade from 2.6.35.25 to 2.6.35.27.
The problem I see now is that I get this message when coming back from sleep (I coped it down since after the message I couldn't do anything else):
pciehp 0000:00:1c.0 pcie04: Device 0000:02:00 already exists, cannot hot-add
pciehp 0000:00:1c.0 pcie04: Cannot add device at 0000:02:00
I checked my pci listing and the device on 0000:02:00 is my ethernet adapter:
shahars@shahars-ThinkPad-T60:~$ lspci | grep 02:00
02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
View 3 Replies
View Related
May 16, 2011
ever since i upgraded to 11.04 + gnome 3 the computer freezes to the point that the mouse doesnt move... for 30 seconds or so Also,if i put the computer to stand by, many times doesnt wake up properly, looks like the graphics are corrupted the mouse moves jamming until it fully freezes
View 1 Replies
View Related
May 31, 2010
I have a laptop and wanna have it set up for going to sleep and waking up at certain time and then run certain files/programs. I used a single program for this back in windows but cant remember the name. Do yo know a program that will do this for me?
View 6 Replies
View Related
Dec 24, 2010
I have a WD MyPassport 320GB external hdd and Ubuntu 10.10. The problem is that I can't access my drive after waking from sleep. I can't even unmount it; gives me an error like: "umount: /media/0A26FE8626FE71D5 mount disagrees with the fstab".
View 2 Replies
View Related
Feb 15, 2011
32 bit Lucid is hanging at random times for me. it always happens when there's some sort of full-screen overlay, like when waking from screensaver, or when using gksu (dims the screen). The machine will remain unresponsive for 30 seconds to a minute, then becomes usable again, just with the desktop not refreshed. Nothing of interest in the logs when this happens. The last thing upgraded in the machine was the graphics card (now running a GTS 450). 3d apps work just fine, temps are just fine, and I have no reason to believe it's hardware.
View 1 Replies
View Related
May 23, 2011
My AspireOne with Xubuntu 11.04 goes back to hibernate just after I hit a key to wake it up. I recorded a video of the problem, but this forum won't allow me to post the link. I guess you can PM if you want to watch the problem.
The trouble started immediately after I followed the instructions to test out Unity. I was going to post the link, but again, noobs like me can't do that.
View 1 Replies
View Related
Aug 27, 2011
Since "upgrading" to 11.4 with KDE desktop my machine is becoming difficult to wake up. After a period of inactivity the disks power down and would power up as soon as I started a program or selected say; Dolphin from the desktop.
Now if I click on an icon I get the bouncing ball for a while and then nothing. The bouncing icon just disappears. I cannot get programs to run and this evening had to restart, which did respond. Before it shut down all the programs I had tried and failed to start proceeded to start, only to be stopped again by the shut down.
This didn't happen with 11.2. Cannot be sure it is software related but are there any checks I can do or is there a sure fire way to wake the machine up?
View 1 Replies
View Related
Mar 24, 2010
I am looking for an automated backup system and I like bacula. I have 3 Notebooks and a Desktop computer that need regular backup. Now I don't want to let them run all night just to do the backuping, so I was thinking I could use wake-on-lan to have bacula wake up the machines, then do the backups, and shut them down afterswards. While this may work with devices on the ethernet, it won't work with the Notebooks on the wifi. So is it possible to have the Notebooks schedules to automatically wake up from suspend or shutdown ? Or is it possible to interject a shutdown command if it is after a cerain hour and call the bacula director to start the backup now?
View 2 Replies
View Related
Jan 14, 2011
At home in Guangzhou, I have no problem connecting to a WPA-secured wireless router.Now I'm on vacation in another city trying to use a dLink DI-624 router. If I connect immediately after reboot, no problem. If I suspend the session and then wake the machine up again, it will try to connect and then tell me WPA authentication failed.This happens both with network manager and wicd.sysinfo says the network controller is an Atheros AR9285 (ethernet is Realtek RTL8101E/8102E, probably not relevant).Since everything works correctly with routers other than the dLink, I'd have to guess it's not a general wireless configuration problem, nor a wireless card malfunction. Maybe some bad handshaking that manifests only after waking from sleep?More out of curiosity -- I'll only be here for a few weeks and a wired connection is readily available. But, say I end up in a hotel somewhere that uses dLink for WiFi
View 2 Replies
View Related
May 15, 2011
I have had a issue with the trackpad not working (cursor does not move, does not click) after I wake up my MacBook Pro 4,1 from sleep. I am pretty sure this is an X issue and not a driver issue because if I log out the trackpad works again. This is also sporadic. Sometimes it occurs, sometimes it does not. Is there some configuration I need to set to fix this?
View 3 Replies
View Related
Aug 14, 2011
Brand new installation of Wheezy on 3.0.0-1 kernel. Once the computer goes to sleep the USB keyboard can't wake it up. I can plug a PS/2 keyboard and wake it up.
View 1 Replies
View Related
Mar 5, 2011
Running Fedora 14, and when I wake the computer after not using it for a few hours I get a black screen with only the mouse pointer visible. This can sometimes be for a minute or up to 5 or 10 minutes, I'm not quite sure what the issue is. I have the screen saver set to blank screen, and I have the computer set to never go into sleep mode, however the display turns off. I just tested it out with the screen saver only activated and it wakes fine, and then set it to turn the display off after 5 minutes, and it wakes up fine if I try then. The issue is when it has been idle for the night or longer. I am running this machine through a KVM, so I'm not sure if that may have something to do with it. You can see from the output here that the mouse seems to be getting discovered all over every time I switch back to this machine.
[Code].....
This isn't a major issue, but it is very annoying if I want to switch over to this machine to get a few things done and switch back. Also, if I am waiting at the blank screen with the mouse, I can still press ctrl + F2 to access the terminal immediately, so the computer is functional but the GUI seems to be delayed in coming back.
View 4 Replies
View Related
Jun 26, 2010
I would like to mount my mp3 player (sdb) without waking up the sleeping SATA disk sda. Attaching mp3 player does not wake sda up, but mounting it does. My system is mostly Slackware 11, so I'm still on kernel 2.4.
View 5 Replies
View Related
